Publications by: Engineering

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Creators | Item Type
Number of items: 1232.

Malekzadeh, M., and Sivakugan, N. (2017) Double drain electrokinetic stabilization of dredged mud using stainless steel electrodes and application of surcharge. KSCE Journal of Civil Engineering. (In Press)

Mujtaba, Hassan, Farooq, Khalid, Sivakugan, Sivakugan, and Das, Braja M. (2017) Evaluation of relative density and friction angle based on SPT-N values. KSCE Journal of Civil Engineering. (In Press)

Bishop, Dean, Situ, Rong, Brown, Richard, and Surawski, Nicholas (2017) Numerical modelling of biodiesel blends in a diesel engine. Energy Procedia. pp. 1-6. (In Press)

Antunes, Elsa, Jacob, Mohan V., Brodie, Graham, and Schneider, Philip A. (2017) Silver removal from aqueous solution by biochar produced from biosolids via microwave pyrolysis. Journal of Environmental Management, 203 (Part 1). pp. 264-272.

Jaditager, Mohamed, and Sivakugan, Nagaratnam (2017) Influence of fly ash-based geopolymer binder on the sedimentation behaviour of dredged mud. Journal of Waterway, Port, Coastal, and Ocean Engineering, 143 (5). pp. 1-9.

AL-Jumaili, Ahmed, Bazaka, Kateryna, and Jacob, Mohan V. (2017) Retention of antibacterial activity in geranium plasma polymer thin films. Nanomaterials, 7 (9). pp. 1-22.

AL-Jumaili, Ahmed, Alancherry, Surjith, Bazaka, Katia, and Jacob, Mohan V. (2017) Review on the antimicrobial properties of carbon nanostructures. Materials, 10 (9). pp. 1066-1052.

Satheeskumar, Navaratnam, Henderson, David James, Ginger, John David, and Wang, Chi-Hsiang (2017) Three-dimensional finite-element modeling and validation of a timber-framed house to wind loading. Journal of Structural Engineering, 143 (9). pp. 1-11.

Heindler, Franz M., Alajmi, Fahad, Huerlimann, Roger, Zeng, Chaoshu, Newman, Stephen J., Vamvounis, George, and van Herwerden, Lynne (2017) Toxic effects of polyethylene terephthalate microparticles and Di(2-ethylhexyl)phthalate on the calanoid copepod, Parvocalanus crassirostris. Ecotoxicology and Environmental Safety, 141. pp. 298-305.

Yang, Ping, Xiao, Yue, Guan, Yong Liang, Liu, Zilong, Li, Shaoqian, and Xiang, Wei (2017) Adaptive SM-MIMO for mmWave communications with reduced RF chains. IEEE Journal on Selected Areas in Communications, 35 (7). pp. 1472-1485.

Gao, Pan, Peng, Qiang, and Xiang, Wei (2017) Analysis of packet-loss-induced distortion in view synthesis prediction-based 3-D video coding. IEEE Transactions on Image Processing, 26 (6). pp. 2781-2796.

Palma, H., Killoran, E., Sheehan, M., Berner, F., and Heimann, K. (2017) Assessment of microalga biofilms for simultaneous remediation and biofuel generation in mine tailings water. Bioresource Technology, 234. pp. 327-335.

Yu, Qi-Yue, Guo, Ji-Chong, Gao, Shu-Ying, Meng, Wei-Xiao, and Xiang, Wei (2017) Minimum sum-mean-square-error frequency-domain pre-coding for downlink multi-user MIMO system in the frequency-selective fading channel. IEEE Transactions on Wireless Communications, 16 (6). pp. 3573-3589.

Aghnout, Soraya, Karimi, Gholamreza, and Rahimiazghadi, Mostafa (2017) Modeling triplet spike-timing-dependent plasticity using memristive devices. Journal of Computational Electronics, 16 (2). pp. 401-410.

Khatamifar, Mehdi, Lin, Wenxian, Armfield, S.W., Holmes, David, and Kirkpatrick, M.P. (2017) Conjugate natural convection heat transfer in a partitioned differentially-heated square cavity. International Communications in Heat and Mass Transfer, 81. pp. 92-103.

Xiao, Lixia, Yang, Ping, Xiao, Yu, Fan, Shiwen, Di Renzo, Marco, Xiang, Wei, and Li, Shaoqian (2017) Efficient compressive sensing detectors for generalized spatial modulation systems. IEEE Transactions on Vehicular Technology, 66 (2). pp. 1284-1298.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, Armfield, S.W., and Li, Ming (2017) Penetration height of transitional round fountains in a linearly stratified fluid. International Communications in Heat and Mass Transfer, 81. pp. 79-91.

Sivakugan, Nagarathnam, Gnanendran, Carthigesu T., Tuladhar, Rabin, and Kannan, M. Bobby (2017) Civil Engineering Materials. Cengage Learning, Boston, MA, USA.

Salim, Omar H., Nasir, Ali A., Mehrpouyan, Hani, and Xiang, Wei (2017) Multi-relay communications in the presence of phase noise and carrier frequency offsets. IEEE Transactions on Communications, 65 (1). pp. 79-94.

Alao, Abdur-Rasheed, Stoll, Richard, Song, Xiao-Fei, Miyazaki, Takashi, Hotta, Yasuhiro, Shibata, Yo, and Yin, Ling (2017) Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 102-116.

Sahu, R., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Bearing capacity prediction of inclined loaded strip footing on reinforced sand by ANN. In: Shukla, Sanjay Kumar, and Guler, Erol, (eds.) Advances in Reinforced Soil Structures. Sustainable Civil Infrastructures . Springer, Cham, Switzerland, pp. 97-109.

Antunes, Elsa, Schumann, James, Brodie, Graham, Jacob, Mohan V., and Schneider, Philip A. (2017) Biochar produced from biosolids using a single-mode microwave: characterisation and its potential for phosphorus removal. Journal of Environmental Management, 196. pp. 119-126.

Mazigi, Ohan, Kannan, M. Bobby, Xu, Jia, Han-Cheol, Choe, and Qingsong, Ye (2017) Biocompatibility and degradation of a low elastic modulus Ti-35Nb-3Zr alloy: nanosurface engineering for enhanced degradation resistance. ACS Biomaterials Science & Engineering, 3 (4). pp. 509-517.

Bazaka, Kateryna, and Jacob, Mohan V. (2017) Effects of iodine doping on optoelectronic and chemical properties of polyterpenol thin films. Nanomaterials, 7 (1). pp. 1-16.

Zhao, Yan, Xiao, Yue, Dong, Binhong, Yang, Ping, Xiao, Lixia, and Xiang, Wei (2017) Efficient detection of spatial modulation OFDM systems with multiple carrier frequency offsets. IEEE Communications Letters, 2 (21). pp. 426-429.

Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang, C.H. (2017) Finite element modelling of the structural response of roof to wall framing connections in timber-framed houses. Engineering Structures, 134. pp. 25-36.

Das, Braja M., and Sivakugan, Nagaratnam (2017) Fundamentals of Geotechnical Engineering. Cengage Learning, Boston, MA, USA.

Grant, Daniel S., Rawat, Rajdeep S., Bazaka, Kateryna, and Jacob, Mohan V. (2017) Inelastic deformation of plasma polymerised thin films facilitated by transient dense plasma focus irradiation. Materials Research Express, 4 (9). pp. 1-4.

Niroshan, Naguleswaran, Sivakugan, Nagaratnam, and Veenstra, Ryan Llewellyn (2017) Laboratory study on strength development in cemented paste backfills. Journal of Materials in Civil Engineering, 29 (7). pp. 1-11.

Malekzadeh, Mona, and Sivakugan, Siva (2017) One-dimensional electrokinetic stabilization of dredged mud. Marine Georesources & Geotechnology, 35 (5). pp. 603-609.

Ritchie, Chris, Vamvounis, George, Soleimaninejad, Hamid, Smith, Trevor, Bieske, Evan J., and Dryza, Viktoras (2017) Photochrome-doped organic films for photonic key-pad locks and multi-state fluorescence. Physical Chemistry Chemical Physics. pp. 1-9.

Bazaka, Kateryna, Ahmad, Jakaria, Oelgemöller, Michael, Uddin, Ashraf, and Jacob, Mohan V. (2017) Photostability of plasma polymerized γ-terpinene thin films for encapsulation of OPV. Scientific Reports, 7. pp. 1-9.

Scheuermann, A., Muehlhaus, H.B., Galindo-Torres, S., Harshani, H.M.D., Aminpour, M., Bittner, T., To, P., Gholami-Korzani, M., Pedroso, D., Li, L., and Gross, L. (2017) Physical and mathematical modeling of erosion processes across the scales. In: Papamichos, E., Papanastasiou, P., Pasternak, P., and Dyskin, A., (eds.) Bifurcation and Degradation of Geomaterials with Engineering Applications. Springer Series in Geomechanics and Geoengineering . Springer, Cham, Switzerland, pp. 585-591.

Bazaka, Kateryna, Grant, Daniel S., Alancherry, Surjith, and Jacob, Mohan V. (2017) Plasma assisted fabrication and processing of biomaterials. In: Francis, Raju, and Sakthi Kumar, D., (eds.) Biomedical Applications of Polymeric Materials and Composites. Wiley, Singapore, pp. 91-124.

Long, Hang, Xiang, Wei, and Li, Yuli (2017) Precoding and cooperative jamming in multi-antenna two-way relaying wiretap systems without eavesdroppers' channel state information. IEEE Transactions on Information Forensics and Security, 12 (6). pp. 1309-1318.

Sethy, B.P., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Prediction of ultimate bearing capacity eccentrically loaded rectangular foundations using ANN. In: Shukla, Sanjay Kumar, and Guler, Erol, (eds.) Advances in Reinforced Soil Structures. Sustainable Civil Infrastructures . Springer, Cham, Switzerland, pp. 148-159.

Jacob, Mohan V., Taguchi, Dai, Iwamoto, Mitsumasa, Bazaka, Kateryna, and Rawat, Rajdeep Singh (2017) Resistive switching in graphene-organic device: charge transport properties of graphene-organic device through electric field induced optical second harmonic generation and charge modulation spectroscopy. Carbon, 112. pp. 111-116.

Rahimiazghadi, Mostafa, Linares-Barranco, Bernabe, Abbott, Derek, and Leong, Philip (2017) A hybrid CMOS-memristor neuromorphic synapse. IEEE Transactions on Biomedical Circuits and Systems, 11 (2). pp. 434-444.

Khatamifar, M., Lin, W., Holmes, D., Armfield, S.W., and Kirkpatrick, M.P. (2016) Transient laminar conjugate natural convection in a cavity with a finite thickness and conductivity partition. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.

Zhou, L., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, Wenxian (2016) Transient natural convection flow in a cavity subject to time-varying sidewall heating and cooling. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.

Cao, Feng-Feng, Yu, Qi-Yue, Xiang, Wei, and Meng, Wei-Xiao (2016) BER analysis of physical-layer network coding in the AWGN channel with burst pulses. IEEE Access, 4. pp. 9958-9968.

Jia, Min, Xuemai, Gu, Qing, Guo, Xiang, Wei, and Zhang, Naitong (2016) Broadband hybrid satellite-terrestrial communication systems based on cognitive radio toward 5G. IEEE Wireless Communications Magazine, 6 (23). pp. 96-106.

Jaditager, M., and Sivakugan, S. (2016) Geotechnical site investigations for dredging works - Port of Townsville. In: Proceedings of the 5th International Conference on Geotechnical and Geophysical Site Characterisation (2), pp. 987-990. From: 5th International Conference on Geotechnical and Geophysical Site Characterisation, 5-9 September 2016, Gold Coast, QLD, Australia.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Armfield, S.W., and He, Yinghe (2016) Interaction behavior of triple transitional round fountains in a homogeneous fluid. International Journal of Heat and Fluid Flow, 62 (Part B). pp. 437-454.

Hou, Lu, Zhao, Shaohang, Xiong, Xiong, Zheng, Kan, Chatzimiosis, Perkelis, Hossain, M. Shamin, and Xiang, Wei (2016) Internet of Things cloud: architecture and implementation. IEEE Communications Magazine, 54. pp. 32-39.

Lou, Yi, Ma, Yong-Kui, Yu, Qi-Yue, Zhao, Hong-Lin, and Xiang, Wei (2016) A differential ML combiner for differential amplify-and-forward system in time-selective fading channels. IEEE Transactions on Vehicular Technology, 65 (12). pp. 10157-10163.

Wang, Gengkun, Xiang, Wei, Pickering, Mark, and Chen, Chang Wen (2016) Light field multi-view video coding with two-directional parallel inter-view prediction. IEEE Transactions on Image Processing, 25 (11). pp. 5104-5117.

Philippa, Bronson, White, Ron, and Pivrikas, Almantas (2016) A route to high gain photodetectors through suppressed recombination in disordered films. Applied Physics Letters, 109 (15). pp. 1-4.

Xiang, Wei, Wang, Ning, and Zhou, Yuan (2016) An energy-efficient routing algorithm for software-defined wireless sensor network. IEEE Sensors Journal, 16 (20). pp. 7393-7400.

Stolterfoht, Martin, Armin, Ardalan, Philippa, Bronson, and Neher, Dieter (2016) The role of space charge effects on the competition between recombination and extraction in solar cells with low-mobility photoactive layers. Journal of Physical Chemistry Letters, 7. pp. 4716-4721.

Lehtola, Timo, and Zahedi, Ahmad (2016) Automatic charging scheme for electric vehicle to grid using vehicle built-in monitoring device. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Lehtola, Timo Antero, and Zahedi, Ahmad (2016) Electric vehicle to grid for power regulation: a review. In: Proceedings of the IEEE International Conference on Power System Technology, pp. 1-6. From: POWERCON 2016: IEEE International Conference on Power System Technology, 28 September - 1 October 2016, Wollongong, NSW, Australia.

Datta, Bithin, Amirabdollahian, Mahsa, Zuo, Renguang, and Prakash, Om (2016) Groundwater contamination plume delineation using local singularity mapping technique. International Journal of GEOMATE, 11 (25). pp. 2435-2441.

Malekzadeh, M., and Sivakugan, S. (2016) Assessing the use of aluminium electrodes on the electrokinetic dewatering and stabilization of dredged mud slurries. In: Selected Papers from Sessions of Geo-Chicago 2016, pp. 188-202. From: Geo-Chicago 2016: sustainable waste management and remediation, 14-18 August 2016, Chicago, IL, USA.

Lin, Wenxian, and Armfield, S.W. (2016) Scalings for unsteady natural convection boundary layers on a vertical plate at time-dependent temperature. International Journal of Thermal Sciences, 111. pp. 78-99.

Xu, Weiyang, Xiang, Wei, Elkashlan, Maged, and Mehrpouyan, Hani (2016) Spectrum sensing of OFDM signals in the presence of carrier frequency offset. IEEE Transactions on Vehicular Technology, 65 (8). pp. 6798-6803.

Burns, Max, Natividad Marin, Leynard, and Schneider, Philip A. (2016) Investigations of a continuous Poiseuille flow struvite seed crystallizer: mixer performance and aggregate disruption by sonication. Chemical Engineering Journal, 295. pp. 552-562.

Yin, Shi, Tuladhar, Rabin, Riella, Jacob, Chung, David, Collister, Tony, Combe, Mark, and Sivakugan, Sivakugan (2016) Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete. Construction and Building Materials, 114 (1). pp. 134-141.

Pivrikas, Almantas, Philippa, Bronson, White, Ronald D., and Juska, Gytis (2016) Photocarrier lifetime and recombination losses in photovoltaic systems. Nature Photonics, 10. pp. 282-283.

Rajeev, P., Sumanasekera, P.R., and Sivakugan, N. (2016) Lateral variation of the vertical stress in underground mine stopes filled with granular backfills. Geotechnical and Geological Engineering, 34 (2). pp. 481-492.

Williamson, N., Armfield, S.W., Lin, Wenxian, and Kirkpatrick, M.P. (2016) Stability and Nusselt number scaling for inclined differentially heated cavity flow. International Journal of Heat and Mass Transfer, 97. pp. 787-793.

Ostrikov, Kola, Macgregor-Ramiasa, Melanie N., Cavallaro, Alex A., Jacob, Mohan, and Vasilev, Krasimir (2016) A comparative assessment of nanoparticulate and metallic silver coated dressings. Recent Patents on Materials Science, 9 (1). pp. 50-57.

Yin, Shi, Tuladhar, Rabin, Sheehan, Madoc, Combe, Mark, and Collister, Tony (2016) A life cycle assessment of recycled polypropylene fibre in concrete footpaths. Journal of Cleaner Production, 112 (Part 4). pp. 2231-2242.

Yu, Qi-Yue, Li, Ya-Tian, Xiang, Wei, Meng, Wei-Xiao, and Tang, Wen-Yan (2016) Power allocation for distributed antenna systems in frequency-selective fading channels. IEEE Transactions on Communications, 64. pp. 212-222.

Datta, Bithin, Durand, Frederic, Laforge, Solemne, Prakash, Om, Esfahani, Hamed K., Chadalavada, Sreenivasulu, and Naidu, Ravi (2016) Preliminary hydrogeological modeling and optimal monitoring network design for a contaminated abandoned mine site area: application of developed monitoring network design software. Journal of Water Resource and Protection, 8 (1). pp. 46-64.

Xiang, Wei, Zheng, Kan, and Shen, Xuemin (2016) 5G Mobile Communications. Springer, Cham, Switzerland.

Mahmud, Nasif, Zahedi, Ahmad, and Mahmud, Asif (2016) ANFISPID-based voltage regulation strategy for grid-tied renewable DG system with ESS. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference, pp. 81-86. From: ISGT-Asia 2016: IEEE Innovative Smart Grid Technologies Conference, 28 November - 1 December 2016, Melbourne, VIC, Australia.

Madanayaka, Thushara Asela, and Sivakugan, Siva (2016) Approximate equations for the method of fragment. International Journal of Geotechnical Engineering, 10 (3). pp. 297-303.

Rajeev, P., Sumanasekera, P.R., and Sivakugan, N. (2016) Average vertical stresses in underground mine stopes filled with granular backfills. Geotechnical and Geological Engineering, 34 (6). pp. 2053-2061.

Sahu, R., Patra, C.R., Das, B.M., and Sivakugan, N. (2016) Bearing capacity of shallow strip foundation on geogrid-reinforced sand subjected to inclined load. International Journal of Geotechnical Engineering, 10 (2). pp. 183-189.

Kannan, M. Bobby, Walter, R., and Yamamoto, A. (2016) Biocompatibility and in vitro degradation behavior of magnesium–calcium alloy coated with calcium phosphate using an unconventional electrolyte. ACS Biomaterials Science & Engineering, 2 (1). pp. 56-64.

Inam, Mohammad Ilias, Lin, Wenxian, Armfield, S.W., and He, Yinghe (2016) Correlations for maximum penetration heights of transitional plane fountains in linearly stratified fluids. International Communications in Heat and Mass Transfer, 77. pp. 64-77.

Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M. (2016) Correlations of Soil and Rock Properties in Geotechnical Engineering. Developments in Geotechnical Engineering . Springer, New Delhi, India.

Mahmud, Nasif, Zahedi, Ahmad, and Mahmud, Asif (2016) Dynamic voltage regulation of grid-tied renewable energy system with ANFIS. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-6. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Murray, A., Khakbaz, H., Pranowo, A., Aslin, N., and Kannan, M. Bobby (2016) Effects of process parameters on the adhesive strength of copper electrodeposits in a bench-scale electrowinning cell. Institution of Mining and Metallurgy. Transactions. Section C: Mineral Processing and Extractive Metallurgy, 125 (1). pp. 10-16.

Malekzadeh, M., and Sivakugan, N. (2016) Experimental study on intermittent electroconsolidation of singly and doubly drained dredged sediments. International Journal of Geotechnical Engineering, 11 (1). pp. 32-37.

Zheng, Kan, Zhang, Lin, Xiang, Wei, and Wang, Wenbo (2016) Heterogeneous Vehicular Networks. Springer Briefs in Electrical and Computer Engineering . Springer, Cham, Switzerland.

Kazum, Oluwole, Beladi, Hossein, Timokhina, Ilana B., He, Yinghe, and Kannan, M. Bobby (2016) Hydrogen permeation in nanostructured bainitic steel. Metallurgical and Materials Transactions A, 47A (10). pp. 4896-4903.

Das, Braja M., and Sivakugan, Nagaratnam (2016) Introduction to Geotechnical Engineering. Cengage, Boston, MA, USA.

Yang, Xiaozhen, Zhou, Qihao, Lei, Lei, Zheng, Kan, and Xiang, Wei (2016) An IoT-cloud based wearable ECG monitoring system for smart healthcare. Journal of Medical Systems, 40. pp. 1-11.

Esfahani, Hamed K., and Datta, Bithin (2016) Linked optimal reactive contaminant source characterization in contaminated mine sites: case study. Journal of Water Resources Planning and Management, 142 (12). pp. 1-14.

Singh, Deepesh, and Datta, Bithin (2016) Linked optimization model for groundwater monitoring network design. In: Sarma, Arup K., Singh, Vijay P., Kartha, Suresh A., and Bhattacharjya, Rajib K., (eds.) Urban Hydrology, Watershed Management and Socio-Economic Aspects. Water Science and Technology Library, 73 . Springer, Cham, Switzerland, pp. 107-125.

Gummow, Rosalind June (2016) Li₂MnSiO₄ nanostructured cathodes for rechargeable lithium-ion batteries. In: Ozoemena , Kenneth I., and Chen, Shaowei, (eds.) Nanomaterials in Advanced Batteries and Supercapacitors. Nanostructure Science and Technology . Springer, pp. 25-54.

Yin, Ling, Alao, Abdur-Rasheed, Song, Xiao-Fei, and Stoll, Richard (2016) Manufacturing reliable ceramic crowns: the role of abrasive machining in digital dentistry. In: Proceedings of the 11th International Manufacturing Science and Engineering Conference (1), pp. 1-8. From: ASME 2016: 11th International Manufacturing Science and Engineering Conference, 27 June - 1 July 2016, Blacksburg, VA, USA.

Kazum, O., and Mathan, M. Bobby (2016) Optimising parameters for galvanostatic polyaniline coating on nanostructured bainitic steel. Surface Engineering, 32 (8). pp. 607-6014.

Bazaka, Kateryna, Destefani, Ryan, and Jacob, Mohan V. (2016) Plant-derived cis-β-ocimene as a precursor for biocompatible, transparent, thermally-stable dielectric and encapsulating layers for organic electronics. Scientific Reports, 6. pp. 1-14.

Tamanna, Nafisa, Norsuzailina, Mohamed Sutan, Tuladhar, Rabin, Ching Lee, Delsye Teo, and Yakub, Ibrahim (2016) Pozzolanic properties of glass powder in cement paste. Journal of Civil Engineering, Science and Technology, 7 (2). pp. 75-81.

Patra, C.R., Sivakugan, N., and Das, B.M. (2016) Recent developments on bearing capacity of strip foundation on granular soil under eccentrically inclined load. International Journal of Geotechnical Engineering, 10 (1). pp. 31-39.

Pivrikas, Almantas, Philippa, Bronson, White, Ronald D., and Juška, Gytis (2016) Reply to 'Revisiting photocarrier lifetimes in photovoltaics'. Nature Photonics, 10 (9). p. 563.

Kikkert, Cornelis Jan, and Zhu, Schucheng (2016) Resistive shunt on-line impedance analyzer. In: Proceedings of the 2016 International Symposium on Power Line Communications and it's Applications, pp. 150-155. From: ISPLC: 2016 International Symposium on Power Line Communications and it's Applications, 20-23 March 2016, Bottrop, Germany.

Xiong, Xiong, Hou, Lu, Zheng, Kan, Xiang, Wei, Hossain, M. Shamim, and Rahman, Sk Md Mizanur (2016) SMDP-based radio resource allocation scheme in software-defined Internet of Things networks. IEEE Sensors Journal, 16 (20). pp. 7304-7314.

To, Huu Duc, Galindo-Torres, Sergio Andres, and Scheuermann, Alexander (2016) Sequential sphere packing by trilateration equations. Granular Matter, 18 (70). pp. 1-14.

Madanayaka, Thushara, and Sivakugan, Siva (2016) Simplified method of fragments based two dimensional seepage solution for the double-wall cofferdam. In: Proceedings of the 19th Southeast Asian Geotechnical Conference, pp. 1047-1051. From: SEAGC 2016: 19th Southeast Asian Geotechnical Conference, 31 May - 3 June 2016, Subang Jaya, Malaysia.

Zahedi, A. (2016) Solar PV for Australian tropical region; the most affordable and an appropriate power supply option. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Wu, Shuang, Xiang, Wei, Wang, Zhenyong, Li, Dezhi, and Guo, Qing (2016) Staged growth codes: intermediate performance and overhead analysis. IEEE Communications Letters, 20 (8). pp. 1503-1506.

Lehtola, Timo, and Zahedi, Ahmad (2016) Sustainable energy supply using renewable sources supported by storage technology. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference, pp. 71-74. From: ISGT-Asia 2016: IEEE Innovative Smart Grid Technologies Conference, 28 November - 1 December 2016, Melbourne, VIC, Australia.

Bazaka, Kateryna, Jacob, Mohan V., and Ostrikov, Kostya (Ken) (2016) Sustainable life cycles of natural-precursor-derived nanocarbons. Chemical Reviews, 116 (1). pp. 163-214.

Sahu, R., Patra, C.R., Das, B.M., and Sivakugan, N. (2016) Ultimate bearing capacity of rectangular foundation on geogrid-reinforced sand under eccentric load. International Journal of Geotechnical Engineering, 10 (1). pp. 52-56.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2016) Vertical stress isobars for silos and square backfilled mine stopes. International Journal of Geomechanics, 16 (2).

Li, Jun, Sun, Jinshan, Qian, Yuwen, Shu, Feng, Xiao, Ming, and Xiang, Wei (2016) A commercial video-caching system for small-cell cellular networks using game theory. IEEE Access, 4. pp. 7519-7531.

Wang, Ning, Zhou, Yuan, and Xiang, Wei (2016) An energy efficient clustering protocol for lifetime maximization in wireless sensor networks. In: Proceedings of the IEEE Global Communications Conference. From: GLOBECOM 2016: IEEE Global Communications Conference, 4-8 December 2016, Washington, DC, USA.

Li, Jie, Tang, Xiaohu, and Xiang, Wei (2016) A new construction of (k+2, k) minimal storage regenerating code over F-3 with optimal access property for all nodes. IEEE Communications Letters, 20 (7). pp. 1289-1292.

Yin, Shi, Tuladhar, Rabin, Collister, Tony, Combe, Mark, Sivakugan, Nagaratnam, and Deng, Zongcai (2015) Post-cracking performance of recycled polypropylene fibre in concrete. Construction and Building Materials, 101 (Part 1). pp. 1069-1077.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Shanks, Robert A., Combe, Mark, and Collister, Tony (2015) Mechanical reprocessing of polyolefin waste: a review. Polymer Engineering and Science, 55 (12). pp. 2899-2909.

Kault, David, and Kault, Sam (2015) From p-values to objective probabilities in assessing medical treatments. PLoS ONE, 10 (11). pp. 1-19.

Ajayi, O.O., and Sheehan, M.E. (2015) Pseudophysical compartment modeling of an industrial flighted rotary dryer with flighted and unflighted sections: energy. Industrial & Engineering Chemistry Research, 54 (49). pp. 12331-12341.

Inam, Mohammad Ilias, Lin, Wenxian, Armfield, S.W., and He, Yinghe (2015) Asymmetry and penetration of transitional plane fountains in stratified fluid. International Journal of Heat and Mass Transfer, 90. pp. 1125-1142.

Lehtola, Timo, and Zahedi, Ahmad (2015) Vehicle to grid system in frequency regulation for securing electricity network stability. In: Proceedings from the Asia-Pacific Power and Energy Engineering Conference, pp. 1-4. From: APPEEC 2015: Asia-Pacific Power and Energy Engineering Conference, 15-18 November 2015, Brisbane, QLD, Australia.

Mazierska, Janina, Bangsaeng, Mongkhon, and Kerans, Andrew (2015) Performance of public protection and disaster relief with conventional and high temperature superconducting receive filters in the 800 MHz spectrum in Australia. IEEE Transactions on Applied Superconductivity, 25 (5). pp. 1-12.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2015) Capital dredging at Port of Townsville. In: Proceedings of the Australasian Coasts and Ports Conference, pp. 120-124. From: Coasts & ports 2015: Australasian Coasts and Ports Conference, 15 - 18 September 2015, Auckland, New Zealand.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Combe, Mark, Collister, Tony, and Sivakugan, Nagaratnam (2015) Use of macro plastic fibres in concrete: a review. Construction and Building Materials, 93. pp. 180-188.

Lehtola, Timo, and Zahedi, Ahmad (2015) Cost of EV battery wear due to vehicle to grid application. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Kraatz, Kelly, Dahal, Paricxit, Zahedi, Ahmad, and McPhail, Don (2015) Distribution network configurations for demand matching with photovoltaic systems. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong,NSW, Australia.

Kraatz, Kelly, and Zahedi, Ahmad (2015) Energy management and control strategies of electric vehicle integrated into the Smart Grid. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-5. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Zahedi, Ahmad (2015) A comprehensive review of operational analysis of wind turbines. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-5. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Ahmad, Jakaria, Bazaka, Kateryna, Vasilev, Krasimir, and Jacob, Mohan V. (2015) Electrical conduction in plasma polymerized thin films of γ-terpinene. Journal of Applied Polymer Science, 132 (30).

Birks, Melanie, Smithson, John, Wickett, Di, and Holmes, David (2015) Mapping nursing pathways: a diverse modified Delphi approach. SAGE Open, 5 (3). pp. 1-12.

Sivakugan, Nagaratnam, Veenstra, Ryan, and Niroshan, Naguleswaran (2015) Underground mine backfilling in Australia using paste fills and hydraulic fills. International Journal of Geosynthetics and Ground Engineering, 1 (2). pp. 1-7.

Yin, Shi, Tuladhar, Rabin, Shanks, Robert A., Collister, Tony, Combe, Mark, Jacob, Mohan, Tian, Ming, and Sivakugan, Nagaratnam (2015) Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete. Journal of Applied Polymer Science, 132 (16). pp. 1-10.

Jha, Manish, and Datta, Bithin (2015) Application of dedicated monitoring: network design for unknown pollutant-source identification based on dynamic time warping. Journal of Water Resources Planning and Management, 141 (11). pp. 1-13.

Lovisa, Julie, and Sivakugan, Nagaratnam (2015) Tall oedometer testing: method to account for wall friction. International Journal of Geomechanics, 15 (2). pp. 1-9.

Walter, R., and Mathan, M. Bobby (2015) A mechanistic in vitro study of the microgalvanic degradation of secondary phase particles in magnesium alloys. Journal of Biomedical Materials Research Part A, 103 (3). pp. 990-1000.

Malekzadeh, M., Lovisa, J., and Sivakugan, S. (2015) Consolidation of Cannington mine tailing. In: Proceedings of the 12th Australia New Zealand Conference on Geomechanics (3). From: ANZ 2015: 12th Australia New Zealand Conference on Geomechanics, 22-25 February 2015, Wellington, New Zealand.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2015) Settlement analysis of eastern reclamation area: Port of Townsville. In: Proceedings of the 12th Australia New Zealand Conference on Geomechanics, pp. 1131-1135. From: ANZ 2015: 12th Australia New Zealand Conference on Geomechanics, 22 - 25 February 2015, Wellington, New Zealand.

Shahriar, Mohammad Abu Naser, Das, Braja M., and Sivakugan, Nagaratnam (2015) Developments in quantifying the effect of water table rise on additional settlements of shallow foundations resting on granular soils. International Journal of Geotechnical Engineering, 9 (1). pp. 67-78.

Gover, R.B., Oloyede, A., Thambiratnam, D.P., Thiyahuddin, M.I., and Morris, A. (2015) Experimental and numerical study of polymeric foam efficacy in portable water filled barriers. International Journal of Impact Engineering , 76. 83 - 97.

Khuntia, Sunil, Mujtaba, Hassan, Patra, Chittaranjan, Farooq, Khalid, Sivakugan, Nagaratnam, and Das, Braja M. (2015) Prediction of compaction parameters of coarse grained soil using multivariate adaptive regression splines (MARS). International Journal of Geotechnical Engineering, 9 (1). pp. 79-88.

Ganesalingam, Dhanya, Read, Wayne, and Sivakugan, Nagaratnam (2015) Radial consolidation of soil layer under truncated cone fill. Environmental Geotechnics, 2 (EG1). pp. 56-62.

Shahriar, Mohammad A., Sivakugan, Nagaratnam, Das, Braja M., Urquhart, Alex, and Tapiolas, Michael (2015) Water table correction factors for settlements of shallow foundations in granular soils. International Journal of Geomechanics, 15 (1). pp. 1-7.

Lovisa, Julie, and Sivakugan, Nagaratnam (2015) A simple method to account for non-uniform initial excess pore water pressures in settlement computations. International Journal of Geotechnical Engineering, 9 (1). pp. 89-100.

Sivakugan, Nagaratnam (2015) Preface to special issue on foundations. International Journal of Geotechnical Engineering, 9 (1). p. 1.

Bazaka, K., Jacob, M.V., Chrzanowski, W., and Ostrikov, K. (2015) Anti-bacterial surfaces: natural agents, mechanisms of action, and plasma surface modification. RSC Advances, 5 (60). pp. 48739-48759.

Jha, Manish, and Datta, Bithin (2015) Application of unknown groundwater pollution source release history estimation methodology to distributed sources incorporating surface-groundwater interactions. Environmental Forensics, 16 (2). pp. 143-162.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Hill, Blair, Armfield, S.W., and He, Yinghe (2015) Behavior of the interaction between twin transitional round fountains in a homogeneous fluid, Part 1: experimental study. International Journal of Heat and Mass Transfer, 86. pp. 957-972.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Armfield, St.W., and He, Yinghe (2015) Behavior of the interaction between twin transitional round fountains in a homogeneous fluid, Part 2: numerical study. International Journal of Heat and Mass Transfer, 86. pp. 973-991.

Williamson, N., Armfield, S.W., Kirkpatrick, M.P, and Lin, Wenxian (2015) Bifurcation of natural convection flow in an inclined differentially heated closed square cavity. Computational Thermal Sciences, 7 (5-6). pp. 417-425.

Jacob, Mohan V., Rawat, Rajdeep S., Ouyang, Bo, Bazaka, Kateryna, Kumar, D. Sakthi, Taguchi, Dai, Iwamoto, Mitsumasa, Neupane, Ram, and Varghese, Oomman K. (2015) Catalyst-free plasma enhanced growth of graphene from sustainable sources. Nano Letters, 15. pp. 5702-5708.

Bazaka, Olha, and Bazaka, Kateryna (2015) Cytotoxic effects and biocompatibility of antimicrobial materials. In: Ivanova, Elena P., and Crawford, Russell J., (eds.) Antibacterial Surfaces. Springer, Cham, Switzerland, pp. 113-147.

Sivakugan, Nagaratnam, Lovisa, Julie, and Ameratunga, J. (2015) Filling the hole in the ground: from mining to land reclamation. Environmental Geotechnics, 2 (3). pp. 128-129.

Ouyang, Bo, Jacob, Mohan V., and Rawat, R.S. (2015) Free standing 3D graphene nano-mesh synthesis by RF plasma CVD using non-synthetic precursor. Materials Research Bulletin, 71. pp. 61-66.

Sivakugan, Nagaratnam, Rankine, Kirralee, and Rankine, Rudd (2015) Geotechnical aspects of hydraulic filling of Australian underground mine stopes. In: Indraratna, Buddhima, Chu, Jian, and Rujikiatkamjorn, Cholachat, (eds.) Ground Improvement Case Histories: compaction, grouting and geosynthetics. Elsevier, Sydney, NSW Australia, pp. 83-109.

Zahedi, Ahmad (2015) How expensive is grid-connected solar photovoltaic in Marrakesh: an economic analysis. In: Proceedings of the 3rd International Renewable and Sustainable Energy Conference, pp. 78-82. From: IRSEC 2015: 3rd International Renewable and Sustainable Energy Conference, 10-13 December 2015, Marrakech, Morocco.

Grant, Daniel S., Bazaka, Kateryna, Siegele, Rainer, Holt, Stephen A., and Jacob, Mohan (2015) Ion irradiation as a tool for modifying the surface and optical properties of plasma polymerised thin films. Nuclear Instruments & Methods in Physics Research Section B, 360. pp. 54-59.

Kikkert, Cornelis Jan, and Zhu, Shucheng (2015) Measurement of powerlines and devices using an inductive shunt on-line impedance analyzer. In: Proceedings of the 2015 International Symposium on Power Line Communications and it's Applications, pp. 41-46. From: ISPLC: 2015 International Symposium on Power Line Communications and it's Applications, 29-31 March 2015, Austin, TX, USA.

Berner, Florian, Heimann, Kirsten, and Sheehan, Madoc (2015) Microalgal biofilms for biomass production. Journal of Applied Phycology, 27 (5). pp. 1793-1804.

Brodie, Graham, Jacob, Mohan V., and Farrell, Peter (2015) Microwave and Radio-Frequency Technologies in Agriculture: an introduction for agriculturalists and engineers. De Gruyter Open, Berlin, Germany.

Wang, Vincent Z., and Ong, K.C.G. (2015) Nonparametric statistical formulations for structural health monitoring. Computers and Structures, 148. pp. 63-74.

Jacob, Mohan (2015) Organic Semiconductors. MDPI Books, Basel, Switzerland.

Zhu, Shucheng, Kikkert, Cornelis Jan, and Ertugrul, N. (2015) Software for control and calibration of an inductive shunt on-line impedance analyzer. In: Proceedings of the 2015 International Symposium on Power Line Communications and it's Applications, pp. 53-58. From: ISPLC: 2015 International Symposium on Power Line Communications and it's Applications, 29-31 March 2015, Austin, TX, USA.

Ahmad, Jakaria, Bazaka, Kateryna, Whittle, Jason D., Michelmore, Andrew, and Jacob, Mohan V. (2015) Structural characterization of γ-terpinene thin films using mass spectroscopy and X-Ray photoelectron spectroscopy. Plasma Processes and Polymers, 12 (10). pp. 1085-1094.

Bazaka, K., and Bazaka, O. (2015) Superhydrophobic polymers. In: Crawford, Russell J., and Ivanova, Elena P., (eds.) Superhydrophobic Surfaces. Elsevier, Amsterdam, the Netherlands, pp. 67-85.

Afshar, Sepideh, Sheehan, Madoc, and Fazlollahi, Amir (2015) Using CFD to derive reduced order models for heat transfer in particle curtains. Progress in Computational Fluid Dynamics, 15 (2). pp. 71-80.

Sun, Guangzhi, Saeed, Tanveer, Zhang, Guangxin, and Sivakugan, Nagaratnam (2015) Water quantity and quality assessment on a tertiary treatment wetland in a tropical climate. Water Science & Technology, 71 (4). pp. 511-517.

Ginger, J., Henderson, D., Humphreys, M., Konthesingha, C., and Stewart, M.G. (2015) Wind loads on the frames of industrial buildings. Australian Journal of Structural Engineering, 16 (2). pp. 169-176.

Walsh, Matthew, and Lin, Wenxian (2015) A parametric study on the thermal performance of unglazed solar water collectors with their colorbond steel absorber plates also used as roofs. International Journal of Green Energy, 12 (12). pp. 1309-1322.

Tan, D., Reid, C., Rajeev, P., Piratheepan, J., and Sivakugan, N. (2014) Earth pressure development in integral abutment bridge subjected to thermal loadings. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Rajeev, P., Bui, H., and Sivakugan, N. (2014) Seismic earth pressure development in sheet pile retaining walls: a numerical study. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Zahedi, Ahmad (2014) Developing a method to accurately estimate the electricity cost of grid-connected solar PV in Doha. In: Proceedings of the International Science and Technology Conference, pp. 180-187. From: ISTEC 2014: International Science and Technology Conference, 18-20 December 2014, Doha, Qatar.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2014) Maintenance dredging at Port of Townsville. International Journal of Environmental, Chemical, Ecological and Geophysical Engineering, 8 (12). pp. 734-737.

Malekzadeh, M., Lovisa, J., Sivakugan, S., and Mathan, B. (2014) Physiochemical changes during electrokinetic stabilisation of dredged mud. In: Proceedings of the 7th International Congress on Environmental Geotechnics, pp. 1473-1484. From: ICEG 2014: 7th International Congress on Environmental Geotechnics, 10-14 November 2014, Melbourne, VIC, Australia.

Kerans, Andrew, and Mazierska, Janina (2014) High Temperature Superconducting filters to enable high power Public Safety Mobile Broadband. In: Proceedings of 2014 Asia-Pacific Microwave Conference, pp. 402-404. From: APMC 2014: Asia-Pacific Microwave Conference, 4-7 November 2014, Sendai, Japan.

Bazaka, Kateryna, Ketheesan, Natkunam, and Jacob, Mohan V. (2014) Polymer encapsulation of magnesium to control biodegradability and biocompatibility. Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8087-8093.

Bhuyan, R.K., Kumar, T. Santhosh, Pamu, D., Renehan, J.M., and Jacob, M.V. (2014) Low temperature and broadband dielectric properties of V(2)O(5) doped Mg(2)TiO(4) ceramics. Materials Express, 4 (5). pp. 349-358.

Mazierska, Janina, Leong, Kenneth, Ledenyov, Dimitri, Rains, Adam, Zuchowski, Nina, and Krupka, Jerzy (2014) Microwave measurements of surface resistance and complex conductivity of NdBaCuO films. In: Advances in Science and Technology (95), pp. 162-168. From: 6th Forum on New Materials, 14-20 June 2014, Montecatini Terme.

Surawski, N.C., Miljevic, B., Bodisco, T.A., Situ, R., Brown, R.J., and Ristovski, Z.D. (2014) Performance and gaseous and particle emissions from a liquefied petroleum gas (LPG) fumigated compression ignition engine. Fuel , 133. pp. 17-25.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2014) Vertical stresses within granular materials in containments. International Journal of Geotechnical Engineering, 8 (4). pp. 431-435.

Zahedi, A., and Aldeen, M. (2014) Evaluation of PV solar power generation scenarios in reducing electricity spot price during hot summer days in Victoria, Australia. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-6. From: AUPEC 2014: Australasian Universities Power Engineering Conference, 28 September - 1 October 2014, Perth, WA, Australia.

Zahedi, A. (2014) Proposing a smart electricity pricing model for future smart grid. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2014: Australasian Universities Power Engineering Conference, 28 September - 1 October 2014, Perth, WA, Australia.

Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2014) Influence of the cathodic activity of magnesium alloys on the electrochemical deposition of calcium phosphate. Materials Letters, 130. pp. 184-187.

Wang, Vincent Z., and Sivakugan, Siva (2014) Time-invariant and time-variant reliability analyses of reinforced concrete systems with appraisal data missingness. ACI Structural Journal, 111 (5). pp. 1167-1178.

Jha, Manish Kumar, and Datta, Bithin (2014) Linked simulation-optimization based dedicated monitoring network design for unknown pollutant source identification using dynamic time warping distance. Water Resources Management, 28 (12). pp. 4161-4182.

Zahedi, Ahmad (2014) Benefits of electric vehicle integrated into the electricity network. In: Presented at a Public Lecture at James Cook University, pp. 1-78. From: Public Lecture at James Cook University, 31 July 2014, Townsville, QLD, Australia.

Alabbasi, Alyaa, Kannan, M. Bobby, and Blawert, C. (2014) Dual layer inorganic coating on magnesium for delaying the biodegradation for bone fixation implants. Materials Letters, 124. pp. 188-191.

Gummow, Rosalind J., Han, Guihong, Sharma, Neeraj, and He, Yinghe (2014) Li2MnSiO4 cathodes modified by phosphorous substitution and the structural consequences. Solid State Ionics, 259. pp. 29-39.

Datta, Bithin, and Singh, Deepesh (2014) Optimal groundwater monitoring network design for pollution plume estimation with active sources. International Journal of Geomate, 6 (2). pp. 864-869.

Widisinghe, S.D., Sivakugan, N., and Wang, V.Z. (2014) Loads on barricades in hydraulically backfilled underground mine stopes. In: Proceedings of the 11th International Symposium on Mining with Backfill, pp. 123-134. From: Mine Fill 2014: 11th International Symposium on Mining with Backfill, 20-22 May 2014, Perth, WA, Australia.

Alabbasi, Alyaa, Mehjabeen, Afrin, Kannan, M. Bobby, Ye, Qingsong, and Blawert, Carsten (2014) Biodegradable polymer for sealing porous PEO layer on pure magnesium: an in vitro degradation study. Applied Surface Science, 301. pp. 463-467.

Wang, Vincent Z., and Sivakugan, Nagaratnam (2014) An expectation-maximization algorithm embedded framework for safety assessment of RC systems. ACI Structural Journal, 111 (3). pp. 515-524.

Ting, Ching Hung, Sivakugan, Nagaratnam, Read, Wayne, and Shukla, Sanjay Kumar (2014) Analytical expression for vertical stresses within an inclined mine stope with non-parallel walls. Geotechnical and Geological Engineering, 32 (2). pp. 577-586.

Sivakugan, Nagaratnam, Lovisa, Julie, Ameratunga, Jay, and Das, Braja M. (2014) Consolidation settlement due to ramp loading. International Journal of Geotechnical Engineering, 8 (2). pp. 191-196.

Saeed, Tanveer, Al-Muyeed, Abdullah, Afrin, Rumana, Rahman, Habibur, and Sun, Guangzhi (2014) Pollutant removal from municipal wastewater employing baffled subsurface flow and integrated surface flow-floating treatment wetlands. Journal of Environmental Sciences, 26 (4). pp. 726-736.

Kazum, Oluwole, Kannan, Mathan Bobby, Beladi, Hossein, Timokhina, Ilana, Hodgson, Peter, and Khoddam, Shahin (2014) Selective dissolution of retained austenite in nanostructured bainitic steels. Advanced Engineering Materials, 16 (4). pp. 442-444.

Walsh, Christian, and Wang, Vincent Z. (2014) Towards the reliability quantification of recyclable precast concrete elements and sub-assemblies: a feasibility exploration of the application of an expectation-maximization algorithm embedded safety assessment technique. In: Proceedings of 2014 International Conference on Intelligent Green Building and Smart Grid, pp. 1-4. From: IGBSG 2014: 1st International Conference on Intelligent Green Building and Smart Grid, 23-25 April 2014, Taipei, Taiwan.

Zahedi, A. (2014) Developing a method to accurately estimate the electricity cost of grid-connected solar PV in Bangkok. In: Proceedings of the International Conference and Utility Exhibition on Green Energy for Sustainable Development, pp. 1-4. From: International Conference and Utility Exhibition on Green Energy for Sustainable Development, 19-21 March 2014, Pattaya, Thailand.

Zahedi, Ahmad (2014) Developing a method to analyse the electricity cost of wind power. In: Proceedings of the International Conference and Utility Exhibition on Green Energy for Sustainable Development, pp. 1-5. From: International Conference and Utility Exhibition on Green Energy for Sustainable Development, 19-21 March 2014, Pattaya, Thailand.

Kazum, O., Mathan, M. Bobby, Beladi, H., Timokhina, I.B., Hodgson, P.D., and Khoddam, S. (2014) Aqueous corrosion performance of nanostructured bainitic steel. Materials & Design, 54. pp. 67-71.

Taguchi, Dai, Manaka, Takaaki, Iwamoto, Mitsumasa, Anderson, Liam J., and Jacob, Mohan V. (2014) Study of carrier blocking property of poly-linalyl acetate thin layer by electric-field-induced optical second-harmonic generation measurement. Chemical Physics Letters, 593. pp. 69-71.

Sivakugan, N., Das, B.M., Lovisa, J., and Patra, C.R. (2014) Determination of c and φ of rocks from indirect tensile strength and uniaxial compression tests. International Journal of Geotechnical Engineering, 8 (1). pp. 59-65.

Nelson, P.N., Webb, M.J., Banabas, M., Nake, S., Goodrick, I., Gordon, J., O'Grady, D., and Dubos, B. (2014) Methods to account for tree-scale variability in soil- and plant-related parameters in oil palm plantations. Plant and Soil, 374 (1-2). pp. 459-471.

Yin, L., and Stoll, R. (2014) Ceramics in restorative dentistry. In: Low, I.M., (ed.) Advances in Ceramic Matrix Composites. Woodhead Publishing Series in Composites Science and Engineering, 45 . Woodhead Publishing Limited, Cambridge, UK, 624 -655.

Kannan, M. Bobby (2014) Challenges and opportunities in electrochemically coating calcium phosphate on magnesium alloys for biodegradable implant applications. Materials Science Forum, 783-786. pp. 1269-1273.

Peacock, Patrick, and Holmes, David (2014) Comparison and development of equation of state laws in smoothed particle hydrodynamics. Applied Mechanics and Materials, 553. pp. 144-149.

Bhuyan, Ranjan K., Thatikonda, Santhosh K., Dobbidi, Pamu, Renehan, J.M., and Jacob, Mohan V. (2014) Cryogenic microwave dielectric properties of Mg(2)(TiO(4) ceramics added with CeO(2) nanoparticles. Advances in Material Research, 3 (2). pp. 105-116.

Wang, Guan-long, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2014) Development of automatic test system for thermal performance of all-glass heat pipe evacuated solar collector tube. Journal of Yunnan Normal University, 34 (4). pp. 25-29.

Brodie, Graham, Destefani, Ryan, Schneider, Philip A., Airey, Lyn, and Jacob, Mohan V. (2014) Dielectric properties of sewage biosolids: measurement and modeling. Journal of Microwave Power and Electromagnetic Energy, 48 (3). pp. 147-157.

Tuladhar, Rabin, and Lancini, Benjamin J. (2014) Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers. Structural Engineering and Mechanics, 49 (4). pp. 449-461.

Holmes, John D., Allsop, Andrew C., and Ginger, John D. (2014) Gust durations, gust factors and gust response factors in wind codes and standards. Wind & Structures, 19 (3). pp. 339-352.

Wang, Vincent Z., and Ginger, John D. (2014) Maximum a posteriori estimation based wind fragility analysis with application to existing linear or hysteretic shear frames. Structural Engineering and Mechanics, 50 (5). pp. 653-664.

Gummow, Rosalind J., and He, Yinghe (2014) Mesoporous manganese-deficient lithium manganese silicate cathodes for lithium-ion batteries. RSC Advances, 4 (23). pp. 11580-11584.

Lovisa, J., Sivakugan, N., MacDonald, S., Thomas, S., and Read, W.W. (2014) Modifying the Casagrande curve-fitting method to account for 3D axisymmetric consolidation. In: Oka, Fusao, Murakami, Akira, Uzuoka, Ryosuke, and Kimoto, Sayuri, (eds.) Computer Methods and Recent Advances in Geomechanics. Computer Methods and Recent Advances in Geomechanics . CRC Press, London, UK, pp. 523-528.

Ivanova, Elena P., Bazaka, Kateryna, and Crawford, Russell (2014) New functional biomaterials for medicine and healthcare. Woodhead Publishing Series in Biomaterials, 67 . Woodhead Publishing, Cambridge, UK.

Ahmad, Jakaria, Bazaka, Kateryna, and Jacob, Mohan V. (2014) Optical and surface characterization of radio frequency plasma polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Electronics, 3 (2). pp. 266-281.

Jacob, Mohan V. (2014) Organic semiconductors: past, present and future. Electronics, 3 (4). pp. 594-597.

Kerans, Andrew J., and Mazierska, Janina (2014) Protection of primary users in areas where cognitive radio is deployed. In: Proceedings of the 8th International Conference on Signal Processing and Communication Systems, pp. 1-5. From: ICSPCS 2014: 8th International Conference on Signal Processing and Communication Systems, 15 -17 December 2014, Gold Coast, QLD, Australia.

Ajayi, O.O., and Sheehan, M.E. (2014) Pseudophysical compartment modeling of an industrial rotary dryer with flighted and unflighted sections: solids transport. Industrial & Engineering Chemistry Research, 53. pp. 15980-15989.

Jacob, Mohan V., Easton, Chris D., Anderson, Liam J., and Bazaka, Kateryna (2014) RF plasma polymerised thin films from natural resources. International Journal of Modern Physics: Conference Series, 32. pp. 1-10.

Wang, Vincent Z., Mallett, Michael, and Priory, Andrew (2014) Seismic fragility evaluation with incomplete structural appraisal data: an iterative statistical approach. Journal of Structural Engineering, 140 (2). pp. 1-13.

Khakbaz, Hadis, Walter, Rhys, Gordon, Timothy, and Mathan, M. Bobby (2014) Self-dissolution assisted coating on magnesium metal for biodegradable bone fixation devices. Materials Research Express, 1 (4). pp. 1-9.

Zahedi, Ahmad (2014) Sustainable power supply using solar energy and wind power combined with energy storage. Energy Procedia, 52. pp. 642-650.

Sivakugan, Nagaratnam, Widisinghe, Sankha, and Wang, Vincent Z. (2014) Vertical stress determination within backfilled mine stopes. International Journal of Geomechanics, 14 (5). pp. 1-5.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2014) Vertical stress isobars for trenches and mine stopes containing granular backfills. International Journal of Geomechanics, 14 (2). pp. 313-318.

Ahmad, Jakaria, Bazaka, Katia, Oelgemöller, Michael, and Jacob, Mohan V. (2014) Wetting, solubility and chemical characteristics of plasma-polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Coatings, 4 (3). pp. 527-552.

Zaeri, Mahtab, Sharda, Nalin, and Zahedi, Ahmad (2014) A five layer model for simulating a virtual power plant. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference, pp. 435-440. From: ISGT Asia 2014: IEEE nnovative Smart Grid Technologies Conference, 20-23 May 2014, Kuala Lumpur, Malaysia.

Li, Ren-fei, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2014) The influence of daily radiation collected on the daily heat gain of an evacuated tube solar water heater. Journal of Yunnan Normal University, 34 (1). pp. 31-35.

Hoque, N., Situ, R., Hagan, W., Almedia, J., Lin, W., and Brown, R.J. (2014) A thermo-fluid study of a diesel engine wet scrubber. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Zhu, Shucheng, Kikkert, Cornelis Jan, and Ertugrul, Nesimi (2014) A wide bandwidth, on-line impedance measurement method for power systems, based on PLC techniques. In: Proceedings of the 2014 IEEE International Symposium on Circuits and Systems, pp. 1167-1170. From: ISCAS 2014: International Symposium on Circuits and Systems, 1-5 June 2014, Melbourne, VIC, Australia.

Saeed, Tanveer Ferdous, Al Muyeed, Abdullah, and Sun, Guangzhi (2013) Ammoniacal nitrogen and organics removal modelling in vertical flow wetlands treating strong wastewaters. Wetland Science, 11 (4). pp. 421-432.

Stewart, Nicholas J., Holmes, David W., Lin, Wenxian, Armfield, Steven W., and Kirkpatrick, Michael P. (2013) Direct numeric simulation of sheared convective boundary layer entrainment with GPUs. In: Proceedings of the 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, pp. 1-8. From: APCOM and ISCM 2013: 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, 11-14 December 2013, Singapore.

Lin, Wenxian, and Armfield, S.W. (2013) Direct numerical simulation of unsteady natural convection boundary layers on an evenly heated plate with time-varying heating flux. In: Proceedings of the 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, pp. 1-8. From: APCOM and ISCM 2013: 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, 11-14 December 2013, Singapore.

Lin, Wenxian, and Armfield, S.W. (2013) Scalings for unsteady natural convection boundary layers on an evenly heated plate with time-dependent heating flux. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), E88 (6). pp. 1-17.

Gummow, R.J., Blackford, M.G., Lumpkin, G.R., and He, Y. (2013) An electron energy loss spectroscopy and electron diffraction study of the Pmnb polymorph of Li2MnSiO4. Journal of Alloys and Compounds, 551. pp. 521-526.

Jacob, Mohan V., Olsen, Natalie S., Anderson, Liam J., Bazaka, Kateryna, and Shanks, Robert A. (2013) Plasma polymerised thin films for flexible electronic applications. Thin Solid Films, 546. pp. 167-170.

Ding, Xiang, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Li, Ming (2013) Study on operational performance of a solar water heater hanged on the balcony wall under different inclinations in summer. Acta Energiae Solaris Sinica, 34 (11). pp. 1895-1902.

Yin, Ling, Lymer, Richard, Billiau, Nicholas, Peng, Zhongxiao, and Stoll, Richard (2013) Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic. Journal of Materials Science, 48 (22). pp. 7902-7912.

Lovisa, Amy C., Wang, Vincent Z., Henderson, David J., and Ginger, John D. (2013) Development and validation of a numerical model for steel roof cladding subject to static uplift loads. Wind & Structures, 17 (5). pp. 495-513.

Ahmad, Jakaria, Bazaka, Kateryna, Anderson, Liam J., White, Ronald D., and Jacob, Mohan V. (2013) Materials and methods for encapsulation of OPV: a review. Renewable and Sustainable Energy Reviews, 27. pp. 104-117.

Lovisa, Julie, and Sivakugan, Nagaratnam (2013) A method to determine c(v)under sinusoidal pore pressure distributions. Geotechnical Testing Journal, 36 (6). pp. 1-12.

Smith, Calvin M., and Yin, Ling (2013) Nanoindentation studies on lithium disilicate glass ceramics. In: Proceedings of the Materials Science and Technology Conference, pp. 2825-2831. From: MS&T 2013: Materials Science and Technology Conference, 27-31 October 2013, Montréal, QC, Cananda.

Mazierska, Janina (2013) Microwave properties and applications of HTS materials: history and progress. In: Presentations from the East Asia Symposium on Superconductive Electronics, p. 46. From: EASSE 2013: 7th East Asia Symposium on Superconductive Electronics, 23-26 October 2013, Taipei, Taiwan.

Datta, Bithin, Prakash, Om, Campbell, Sean, and Escalada, Gerry (2013) Efficient identification of unknown groundwater pollution sources using linked simulation-optimization incorporating monitoring location impact factor and frequency factor. Water Resources Management, 27 (14). pp. 4959-4976.

Ganesalingam, Dhanya, Read, Wayne, and Sivakugan, Siva (2013) Consolidation behaviour of a cylindrical soil layer subjected to nonuniform pore-water pressure distribution. International Journal of Geomechanics, 13 (5). pp. 665-671.

Kannan, M. Bobby , and Liyanaarachchi, S. (2013) Hybrid coating on a magnesium alloy for minimizing the localized degradation for load-bearing biodegradable mini-implant applications. Materials Chemistry and Physics, 142 (1). pp. 350-354.

Wang, Vincent Z., and Lyons, Emma (2013) Large-sample normal approximation and relevant sensitivity in linear seismic fragility analysis with hierarchically modeled stiffness properties. Probabilistic Engineering Mechanics, 34. pp. 91-100.

Hollands, K.G. Terry, and Suehrcke, Harry (2013) A three-state model for the probability distribution of instantaneous solar radiation, with applications. Solar Energy, 96. pp. 103-112.

Peacock, Patrick H., and Holmes, David W. (2013) Development and verification of a particle number density variant of sph to robustly incorporate energy and heat transfer. In: Proceedings of the Third International Conference on Particle-Based Methods: fundamentals and applications, pp. 1-12. From: Particles 2013: Third International Conference on Particle-Based Methods: fundamentals and applications, 18-20 September 2013, Stuttgart, Germany.

Leonardi, Christopher R., Jones, Bruce D., Holmes, David W., and Williams, John R. (2013) Numerical rheometry of non-Newtonian particle suspensions using coupled lattice Boltzmann-discrete element methods. In: Proceedings of the Third International Conference on Particle-Based Methods: fundamentals and applications. From: Particles 2013: Third International Conference on Particle-Based Methods: fundamentals and applications, 18-20 September 2013, Stuttgart, Germany.

Yin, Shi, Tuladhar, Rabin, Combe, Mark, Collister, Tony, Jacob, Mohan, and Shanks, Robert (2013) Mechanical properties of recycled plastic fibres for reinforcing concrete. In: Proceedings of the 7th International Conference Fibre Concrete, pp. 1-10. From: 7th International Conference Fibre Concrete, September 12-13 2013, Prague, Czech Republic.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) Evaluation of wind fragilities of existing multi-story shear frames using maximum a posteriori estimation. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics, pp. 796-804. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Kazum, O., and Mathan, M. Bobby (2013) Galvanostatic polymerisation of aniline on steel: improving the coating performance in chloride-containing environment. Synthetic Metals, 180. pp. 54-58.

Ganesalingam, D., Sivakugan, N., Ameratunga, J., and Schweitzer, G. (2013) Land reclamation on soft clays at Port of Brisbane. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics (1), pp. 2941-2944. From: 18th ICSMGE: 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics, 2-6 September 2013, Paris, France.

Shahriar, M.A., Sivakugan, N., Urquhart, A., Tapiolas, M., and Das, B.M. (2013) A study on the influence of ground water level on foundation settlement in cohesionless soil. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics (1), pp. 953-956. From: 18th ICSMGE: 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics, 2-6 September 2013, Paris, France.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) A surrogate model for a type of nonlinear hysteretic system with application to wind response analysis. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics, pp. 2816-2823. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Sivakugan, Nagaratnam, Rankine, Kelda, Lovisa, Julie, and Hall, William (2013) Flow rate computations in hydraulic fill mine stopes. Indian Geotechnical Journal, 43 (3). pp. 195-202.

Ganesalingam, Dhanya, Sivakugan, Nagaratnam, and Ameratunga, Jay (2013) Influence of settling behaviour of soil particles on the consolidation properties of dredged clay sediment. Journal of Waterway Port Coastal and Ocean Engineering, 139 (4). pp. 295-303.

Anderson, Liam J., Easton, Christopher D., and Jacob, Mohan V. (2013) Compatibility of plasma-deposited linalyl acetate thin films with organic electronic device fabrication techniques. Journal of Materials Science, 48 (14). pp. 4851-4859.

Lu, Jun, Zahedi, Ahmad, Yang, Chengshi, Wang, Mingzhou, and Peng, Bo (2013) Building the hydrogen economy in China: drivers, resources and technologies. Renewable and Sustainable Energy Reviews, 23. pp. 543-556.

Bazaka, K., Chrzanowski, W., Ivanova, E., Ketheesan, N., and Jacob, M. (2013) New encapsulating materials for implantable devices. In: Proceedings of the 38th World Congress of the International College of Surgeons, pp. 67-70. From: 38th World Congress of the International College of Surgeons, 7-10 November 2012, Brisbane, QLD, Australia.

Prakash, Om, and Datta, Bithin (2013) Sequential optimal monitoring network design and iterative spatial estimation of pollutant concentration for identification of unknown groundwater pollution source locations. Environmental Monitoring and Assessment, 185 (7). pp. 5611-5626.

Suehrcke, Harry, Bowden, Ross S., and Hollands, K.G.T. (2013) Relationship between sunshine duration and solar radiation. Solar Energy, 92. pp. 160-171.

Patra, C.R., Behera, R.N., Sivakugan, N., and Das, B.M. (2013) Estimation of average settlement of shallow strip foundation on granular soil under eccentric loading. International Journal of Geotechnical Engineering, 7 (2). pp. 218-222.

Behera, R.N., Patra, C.R., Sivakugan, N., and Das, B.M. (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN: part II. International Journal of Geotechnical Engineering, 7 (2). pp. 165-172.

Shahriar, M. Abu Naser, Sivakugan, N., and Das, B.M. (2013) Settlement correction for future water table rise in granuular soils: a numerical modelling approach. International Journal of Geotechnical Engineering, 7 (2). pp. 214-217.

Widisinghe, Sankha, Sivakugan, Nagaratnam, and Wang, Vincent Z. (2013) Laboratory investigations of arching in backfilled mine stopes. In: 2013 Geotechnical Society of Singapore (GeoSS), pp. 741-746. From: 18th Southeast Asian Geotechnical Conference Cum Inaugural Agssea Conference, 29-31 May 2013, Singapore.

Anderson, L.J., and Jacob, M.V. (2013) Temperature dependent electrical impedance spectroscopy measurements of plasma enhanced chemical vapour deposited linalyl acetate thin films. Thin Solid Films, 534. pp. 452-458.

Amirabdollahian, Mahsa, and Datta, Bithin (2013) Identification of contaminant source characteristics and monitoring network design in groundwater aquifers: an overview. Journal of Environmental Protection, 4 (5A). pp. 26-41.

Kannan, M. Bobby (2013) Improving the packing density of calcium phosphate coating on a magnesium alloy for enhanced degradation resistance. Journal of Biomedical Materials Research Part A, 101A (5). pp. 1248-1254.

Huang, Alex Q., Shee, Xu, Wang, Gangyao, Eckhardt, Chad, and Kikkert, Cornelius K. (2013) The emerging solid state transformer and its impact on the electric power grid. In: Goel, Sanjay, Bush, Stephen F., and Bakken, David, (eds.) IEEE Vision for Smart Grid Communications: 2030 and beyond. Institute of Electrical and Electronics Engineers, New York, NY, USA, pp. 311-325.

Hanna, Daniel, Sivakugan, Nagaratnam, and Lovisa, Julie (2013) Simple approach to consolidation due to constant rate loading in clays. International Journal of Geomechanics, 13 (2). pp. 193-196.

Krupka, J., Wosik, J., Jastrzebski, C., Ciuk, T., Mazierska, J., and Zdrojek, M. (2013) Complex conductivity of YBCO films in normal and superconducting states probed by microwave measurements. IEEE Transactions on Applied Superconductivity, 23 (2). pp. 1-11.

Song, Xin, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, Li, Ming, and Luo, Chuanxu (2013) The operational thermal performance of a simple passive solar house in winter: a case study in Kunming, China. International Journal of Green Energy, 10 (6). pp. 647-660.

Jha, Manish, and Datta, Bithin (2013) Three-dimensional groundwater contamination source identification using adaptive simulated annealing. Journal of Hydrologic Engineering, 18 (3). pp. 307-317.

Laki, Bradley Dean, and Kikkert, Cornelius Jan (2013) Adaptive digital predistortion for wideband high crest factor applications based on the WACP optimization objective: an extended analysis. IEEE Transactions on Broadcasting, 59 (1). pp. 136-145.

Lovisa, Julie, and Sivakugan, Siva (2013) An in-depth comparison of cv values determined using common curve-fitting techniques. Geotechnical Testing Journal, 36 (1). pp. 1-10.

Sivakugan, Nagaratnam, and Widisinghe, Sankha (2013) Stresses within granular materials contained between vertical walls. Indian Geotechnical Journal, 43 (1). pp. 30-38.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2013) Load coefficient for ditch conduits covered with geosynthetic-reinforced granular backfill. International Journal of Geomechanics, 13 (1). pp. 76-82.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2013) Time factor in consolidation: critical review. International Journal of Geomechanics, 13 (1). pp. 83-86.

Song, Xiao-Fei, Yin, Ling, Peng, Jian-Hui, and Lin, Bin (2013) Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece. Ceramics International, 39 (6). pp. 6237-6249.

Srinarayana, N., Armfield, S.W., and Lin, Wenxian (2013) Behaviour of laminar plane fountains with a parabolic inlet velocity profile in a homogeneous fluid. International Journal of Thermal Sciences, 67. pp. 87-95.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2013) Performance evaluation of acid mist reduction techniques in copper electrowinning. Hydrometallurgy, 131-132. pp. 76-80.

Song, Xiao-Fei, Peng, Jian-Hui, Yin, Ling, and Lin, Bin (2013) A machining science approach to dental cutting of glass ceramics using an electric handpiece and diamond burs. Journal of Manufacturing Science and Engineering, 135 (1). pp. 1-6.

Taguchi, Dai, Manaka, Takaaki, Iwamoto, Mitsumasa, Bazaka, Kateryna, and Jacob, Mohan V. (2013) Analyzing hysteresis behavior of capacitance-voltage characteristics of IZO/C₆₀/pentacene/Au diodes with a hole-transport electron-blocking polyterpenol layer by electric-field-induced optical second-harmonic generation measurement. Chemical Physics Letters, 572. pp. 150-153.

Jahirul, M.I., Senadeera, W., Brooks, P., Brown, R.J., Situ, R., Pham, P.X., and Masri, A.R. (2013) An Artificial Neutral Network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions. In: Proceedings of the 20th International Congress on Modelling and Simulation, pp. 1561-1567. From: MODSIM2013: 20th International Congress on Modelling and Simulation, 1-6 December 2013, Adelaide, SA, Australia.

Afshar, Sepideh, and Sheehan, Madoc (2013) CFD and experimental study of convectional heat transfer in free falling particle curtains. In: Proceedings of the 11th International Conference of Numerical Analysis and Applied Mathematics (1558), pp. 2005-2008. From: ICNAAM 2013: 11th International Conference of Numerical Analysis and Applied Mathematics, 21-27 September 2013, Rhodes, Greece.

Mujtaba, Hassan, Farooq, Khalid, Sivakugan, Nagaratnam, and Das, Braja M. (2013) Correlation between gradational parameters and compaction characteristics of sandy soils. International Journal of Geotechnical Engineering, 7 (4). pp. 395-401.

Kannan, M. Bobby, Raman, R.K. Singh, Khodham, S., and Liyanaarachchi, S. (2013) Corrosion behavior of twinning-induced plasticity (TWIP) steel. Materials and Corrosion, 64 (3). pp. 231-235.

Zahedi, Ahmad (2013) Developing a method to accurately estimate the grid-connected solar PV electricity cost in Hobart-Australia. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-4. From: AUPEC 2013: Australasian Universities Power Engineering Conference, 29 September - 03 October 2013, Hobart, TAS, Australia.

Tuladhar, Rabin, Sexton, Aaron, and Joyce, Paul (2013) Durability of concrete with pitchstone fines as a partial cement replacement. In: Proceedings of Concrete Institute of Australia’s Biennial National Conference. From: Concrete 2013: Concrete Institute of Australia’s Biennial National Conference, 16-18 October 2013, Gold Coast, QLD, Australia.

Zahedi, Ahmad (2013) Economic analysis of wind power development in coastal regions of Tasmania. In: Proceedings of the Australasian Universities Power Engineering Conference in 2013, pp. 1-6. From: AUPEC 2013: Australasian Universities Power Engineering Conference, 29 September - 03 October 2013, Hobart, TAS, Australia.

Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2013) Effect of surface roughness on the in vitro degradation behaviour of a biodegradable magnesium-based alloy. Applied Surface Science, 279. pp. 343-348.

Kazum, O., Kannan, M. Bobby, Scharnagl, N., Blawert, C., and He, Y. (2013) Electrochemical corrosion behaviour of WE54 magnesium alloy. Materials Science Forum, 765. pp. 644-647.

Yin, L., Singh, P., Brodie, G., Sheehan, M., and Jacob, M.V. (2013) Experimental and simulation approaches: effect of microwave energy on mechanical strength in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 10 (2). pp. 120-128.

Kazum, O., and Kannan, M. Bobby (2013) Galvanostatic coating of polyaniline on steel. In: Proceedings of the Australasian Corrosion Association Annual Conference, pp. 1-6. From: ACA 2013: Australasian Corrosion Association Annual Conference, 10-13 November 2013, Brisbane, QLD, Australia.

Gummow, Rosalind J., Sharma, Neeraj, Feng, Ruishu, Han, Guihong, and He, Yinghe (2013) High performance composite lithium-rich nickel manganese oxide cathodes for lithium-ion batteries. Journal of the Electrochemical Society, 160 (10). A1856-A1862.

Bazaka, Kateryna, and Jacob, Mohan V. (2013) Implantable devices: issues and challenges. Electronics, 2 (1). pp. 1-34.

Ganesalingam, Dhanya, Sivakugan, Nagaratnam, and Read, Wayne (2013) Inflection point method to estimate c(h) from radial consolidation tests with peripheral drain. Geotechnical Testing Journal, 36 (5). pp. 707-712.

Sawant, V.A., Shukla, S.K., Sivakugan, N., and Das, B.M. (2013) Insight into pile set-up and load carrying capacity of driven piles. International Journal of Geotechnical Engineering, 7 (1). pp. 71-83.

Kim, P.Y., and Ginger, J.D. (2013) Internal pressures in buildings with a dominant opening and background porosity. Wind & Structures, 16 (1). pp. 47-60.

Situ, Rong, and Brown, Richard J. (2013) Mixing and dispersion of pollutants emitted from an outboard motor. Marine Pollution Bulletin, 69 (1-2). pp. 19-27.

Schneider, Philip A., Wallace, James W., and Tickle, Julian C. (2013) Modelling and dynamic simulation of struvite precipitation from source-separated urine. Water Science and Technology, 67 (12). pp. 2724-2732.

Gilberd, J., and Sheehan, M. (2013) Modelling the effects of bagasse pre-drying in sugar mill boiler systems. In: Proceedings of the 35th Conference of the Australian Society of Sugar Cane Technologists. From: 35th Conference of the Australian Society of Sugar Cane Technologists, 16-18 April 2013, Townsville, QLD, Australia.

Tuladhar, R., Mutsuyoshi, H., and Maki, T. (2013) Numerical modelling and full-scale testing of concrete piles under lateral loading. Australian Journal of Structural Engineering, 14 (3). pp. 229-242.

Alabbasi, Alyaa, Kannan, M. Bobby, Walter, Rhys, Störmer, M., and Blawert, C. (2013) Performance of pulsed constant current silicate-based PEO coating on pure magnesium in simulated body fluid. Materials Letters, 106. pp. 18-21.

Kannan, M. Bobby, and Wallipa, O. (2013) Potentiostatic pulse-deposition of calcium phosphate on magnesium alloy for temporary implant applications: an in vitro corrosion study. Materials Science and Engineering C, 33 (2). pp. 675-679.

Behera, R.N., Patra, C.R., Sivakugan, N., and Das, B.M. (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN, part I. International Journal of Geotechnical Engineering, 7 (1). pp. 36-44.

Kikkert, Cornelius J. (2013) RF Electronics: design and simulation. James Cook University, Townsville, QLD, Australia.

Gummow, R.J., and He, Y. (2013) Recent progress in the development of Li2MnSiO4 cathode materials. Journal of Power Sources, 253. pp. 315-331.

Cao, X.-X., Lu, X.-G., Zhang, Z.-S., Zou, Y.-C., and Sun, G.-Z. (2013) Research progress on the design of constructed wetlands. Wetland Science, 11 (1). pp. 121-128.

Kannan, M. Bobby (2013) Role of recrystallized grains on the environment-assisted cracking of aluminium-alloy. Materials Science Forum, 753. pp. 489-492.

Leonardi, Christopher R., Jones, Bruce D., Holmes, David W., and Williams, John R. (2013) Simulation of complex particle suspensions using coupled lattice boltzmann-discrete element methods. In: Proceedings of the 6th International Conference on Discrete Element Methods. From: DEM6: 6th Internatioal Conference on Discrete Element Methods , 5 - 6 August 2013, Golden, CO, USA.

Situ, Rong, Ireland, Glenn, Bodisco, Tim, and Brown, Richard (2013) Thermodynamic modeling of ethanol fumigation in a diesel engine. In: Proceedings of the 20th International Congress on Modelling and Simulation, pp. 1568-1574. From: MODSIM2013: 20th International Congress on Modelling and Simulation, 1-6 December 2013, Adelaide, SA, Australia.

Ma, Fangfang, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Li, Ming (2013) An experimental study on the impacts of key parameters of all-glass evacuated tubes on the thermal performances of all-glass evacuated tube solar water heaters. Journal of Renewable and Sustainable Energy, 5. pp. 1-14.

Saeed, Tanveer, and Sun, Guangzhi (2013) A lab-scale study of constructed wetlands with sugarcane bagasse and sand media for the treatment of textile wastewater. Bioresource Technology, 128. pp. 438-447.

Kikkert, Cornelis Jan (2013) An on-line PLC frequency impedance analyzer. In: Proceedings of the IEEE International Conference on Smart Grid Communications, pp. 606-611. From: IEEE International Conference on Smart Grid Communications, 21-24 October 2013, Vancouver, BC, Canada.

Walter, Rhys, Mehjabeen, Afrin, Gordon, Timothy, Kannan, M. Bobby, and UNSPECIFIED (2013) precipitation of struvite on pure magnesium and in vitro degradation behaviour. In: Proceedings of the CHEMECA 2013. From: CHEMECA 2013, 29 September - 2 October 2013, Brisbane, QLD, Australia.

Miller, Craig, Holmes, John, Henderson, David, Ginger, John, and Morrison, Murray (2013) The response of the dines anemometer to gusts and comparisons with cup anemometers. Journal of Atmospheric and Oceanic Technology, 30 (7). pp. 1320-1336.

Lin, Wenxian, and Armfield, S.W. (2012) Unified Prandtl number scaling for start-up and fully developed natural-convection boundary layers for both Pr ≳1 and Pr ≳1 fluids with isothermal heating. Physical Review E, 86 (6). pp. 1-10.

Saeed, Tanveer, and Sun, Guangzhi (2012) A review on nitrogen and organics removal mechanisms in subsurface flow constructed wetlands: dependency on environmental parameters, operating conditions and supporting media. Journal of Environmental Management, 112. pp. 429-448.

Zahedi, Ahmad (2012) Current status and future prospects of the wind energy. In: Papers of the 10th International Power & Energy Conference, pp. 1-5. From: International Power & Energy Conference 2012, 12-14 December 2012, Ho Chi Minh City, Vietnam.

Zahedi, Ahmad (2012) Performance evaluation of wind turbine using Monte Carlo method and turbine power curve. In: Proceedings of the 10th International Power and Energy Conference, pp. 1-5. From: International Power and Energy Conference 2012, 12-14 December 2012, Ho Chi Minh City, Vietnam.

Afshar, Sepideh, and Sheehan, Madoc (2012) Using CFD to simulate heat transfer in particle curtains. In: Ninth International Conference on CFD in the Minerals and Process Industries, pp. 1-7. From: Ninth International Conference on CFD in the Minerals and Process Industries, 10-12 December 2012, Melbourne, Australia.

Yin, Ling, Singh, Parmeet, Brodie, Graham, Sheehan, Madoc, and Jacob, Mohan V. (2012) Influence of microwave energy on mechanical strength in sugarcane. In: Proceedings of the 7th Australasian Congress on Applied Mechanics, pp. 754-758. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Peng, Zhongxiao, Wang, Meiling, and Yin, Ling (2012) Investigation of nano-mechanical properties of cartilages of sheep knee joints. In: Proceedings of the 7th Australasian Congress on Applied Mechanics, pp. 315-321. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Bazaka, Kateryna, and Jacob, Mohan V. (2012) Solubility and surface interactions of RF plasma polymerized polyterpenol thin films. Materials Express, 2 (4). pp. 285-293.

Furyk, Jeremy S., Lawlor, Jenine, Franklin, Richard, O'Kane, Carl, Kault, David, Banks, Colin, and Aitken, Peter (2012) Emergency department presentations during the State of Origin rugby league series: a retrospective statewide analysis. Medical Journal of Australia, 197 (11). pp. 663-666.

Mahmud, H., Hill, B., Gao, W., Lin, W., He, Y., and Armfield, S.W. (2012) PIV study on the interaction of triple transitional round fountains in a homogeneous fluid. In: Proceedings of the 18th Australasian Fluid Mechanics Conference, pp. 1-4. From: 18th Australasian Fluid Mechanics Conference, 3-7 December 2012, Launceston, Tasmania, Australia.

Kannan, M. Bobby, and Dietzel, W. (2012) Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy. Materials and Design, 42. pp. 321-326.

Laki, Bradley Dean, and Kikkert, Cornelis Jan (2012) Adaptive digital predistortion for wideband high crest factor applications based on the WACP optimization objective: a conceptual overview. IEEE Transactions on Broadcasting, 58 (4). pp. 609-618.

Patra, C.R, Behera, R.N., Sivakugan, N., and Das, B.M. (2012) Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load, Part II. International Journal of Geotechnical Engineering, 6 (4). pp. 507-514.

Mahmud, H., Lin, Wenxian, Gao, Wenfeng, He, Yinghe, and Armfield, S.W. (2012) Direct numerical simulation of interaction of twin transitional fountains in a homogeneous fluid. In: Proceedings of the 4th International Conference on Computational Methods (ICCM 2012), pp. 1-8. From: 4th International Conference on Computational Methods (ICCM 2012), 25-28 NOV 2012, Gold Coast, Australia.

Zahedi, Ahmad, and Lu, Jun (2012) Economic evaluation of grid-connected solar PV production cost in New Zealand. In: Proceedings of the 2012 International Conference on Power System Technology, pp. 1-4. From: POWERCON 2012, 30 October - 2 November 2012, Auckland, New Zealand.

Lu, Jun, and Zahedi, Ahmad (2012) Constrained model predictive control of proton exchange membrane fuel cell based on a combined empirical and mechanistic model. Journal of Renewable and Sustainable Energy, 4 (5). pp. 1-15.

Sivakugan, Nagaratnam, and Rankine, Kelda (2012) Three-dimensional method of fragments to study drainage through hydraulic fill stopes. International Journal of Geomechanics, 12 (5). pp. 612-615.

Sun, Guangzhi, Zhu, Yafei, Saeed, Tanveer, Zhang, Guangxin, and Lu, Xianguo (2012) Nitrogen removal and microbial community profiles in six wetland columns receiving high ammonia load. Chemical Engineering Journal, 203. pp. 326-332.

Kannan, M. Bobby, Koc, Erkan, and Unal, Mehmet (2012) Biodegradability of β-Mg17Al12 phase in simulated body fluid. Materials Letters, 82. pp. 54-56.

Sheehan, Madoc, Desha, Cheryl, Schneider, Phil, and Turner, Phil (2012) Embedding sustainability into chemical engineering education: content development and competency mapping. In: Chemeca 2012, pp. 927-936. From: Quality of Life Through Chemical Engineering, 23-26 September 2012, The Museum of New Zeland, Te Papa Tongarewa, Wellington, New Zealand.

Yin, Ling (2012) Property–process relations insimulated clinical abrasive adjusting of dental ceramics. Journal of the Mechanical Behaviour of Biomedical Materials, 16. pp. 55-65.

Patra, C.R, Behara, R.N., Sivakugan, N., and Das, B.M. (2012) Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load, Part I. International Journal of Geotechnical Engineering, 6 (3). pp. 343-352.

Saeed, Tanveer, Afrin, Rumana, Al Muyeed, Abdullah, and Sun, Guangzhi (2012) Treatment of tannery wastewater in a pilot-scale hybrid constructed wetland system in Bangladesh. Chemosphere, 88 (9). pp. 1065-1073.

Ganesalingam, Dhanya, Ameratunga, Jay, Scweitzer, Guy, Boyle, Peter, and Sivakugan, Siva (2012) Anisotropy in the permeability and consolidation characteristics of dredged mud. In: ANZ 2012 Conference Proceedings, pp. 752-757. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, VIC, Australia.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2012) Vertical stresses within granular materials in silos. In: ANZ 2012 Conference Proceedings, pp. 590-595. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, Australia.

Jayasinghe, N.C., Ginger, J.D., Henderson, D.J., and Walker, G.R. (2012) Distribution of wind loads in roofing connections. In: Australasian Structural Engineering Conference-Proceedings, pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Arulrajah, A., Piratheepan, J., Bo, M.W., and Sivakugan, N. (2012) Geotechnical characteristics of recycled crushed brick blends for pavement sub-base applications. Canadian Geotechnical Journal, 49 (7). pp. 796-811.

Li, HongYan, Zhang, GuangXin, and Sun, GuangZhi (2012) Simulation and evaluation of the water purification function of Zhalong Wetland based on a combined water quantity-quality model. Science China Technological Sciences, 55 (7). pp. 1973-1981.

Lovisa, A.C., Wang, V.Z., Henderson, D.J., and Ginger, J.D. (2012) A finite element model for pierced-fixed, corrugated metal roof cladding subject to uplift wind loads. In: Australasian Structural Engineering Conference-Proceedings, pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Kannan, M. Bobby (2012) Enhancing the performance of calcium phosphate coating on a magnesium alloy for bioimplant applications. Materials Letters, 76. pp. 109-112.

Tilke, Peter G., Leonardi, Christopher R., Holmes, David W., and Williams, John R. (2012) A multicore numerical framework for assessing the permeability of reservoir rocks. In: Proceedings of the Fourth International Conference on Porous Media and its Applications in Science, Engineering and Industry. From: Fourth International Conference on Porous Media and its Applications in Science, Engineering and Industry, 17-22 June 2012, Potsdam, Germany.

Everingham, Yvette L., Stoeckl, Natalie E., Cusack, Justin, and Osborne, John A. (2012) Quantifying the benefits of a long-lead ENSO prediction model to enhance harvest management: a case study for the Herbert sugarcane growing region, Australia. International Journal of Climatology, 32 (7). pp. 1069-1076.

Song, Xiao-Fei, Yin, Ling, Peng, Jianhui, and Lin, Bin (2012) In vitro dental cutting of feldspar and leucite glass ceramics using an electric handpiece. In: Proceedings of the ASME International Manufacturing Science and Engineering Conference, pp. 43-50. From: ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012, 4-8 June 2012, Notre Dame, Indiana, USA.

Ajayi, O.O., and Sheehan, M.E. (2012) Application of image analysis to determine design loading in flighted rotary dryers. Powder Technology, 223. pp. 123-140.

Lovisa, J., Read, W.W., and Sivakugan, N. (2012) Calculating cv based on non-uniform initial excess pore pressure. Géotechnique, 62 (8). pp. 741-748.

Saeed, Tanveer Ferdous, and Sun, Guangzhi (2012) A comparative study of pollutant removal stability in hybrid wetland columns. Wetland Science, 10 (2). pp. 142-148.

Mazierska, Janina (2012) Analysis of wireless communication In North Queensland Australia with HTS front end receivers. In: International Symposium on High Temperature Superconductors in High Frequency Fields, pp. 20-23. From: 11st International Symposium on High Temperature Superconductors in High Frequency Fields, 29 May - 1 June 2012, Yamagata University, Japan.

Mazierska, Janina, Krupka, Jerzy, and Wosik, J. (2012) Measurements of intrinsic losses of high temperature superconducting thin films: surface resistance and conductivity. In: International Symposium on High Temperature Superconductors in High Frequency Fields, pp. 7-8. From: 11th International Symposium on High Temperature Superconductors in High Frequency Fields, 29 May - 1 June 2012, Yamagata University, Japan.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2012) 2D and 3D mapping of microindentations in hydrated and dehydrated cortical bones using confocal laser scanning microscopy. Journal of Materials Science, 47 (10). pp. 4432-4438.

Ajayi, O.O., and Sheehan, M.E. (2012) Design loading of free flowing and cohesive solids in flighted rotary dryers. Chemical Engineering Science, 73. pp. 400-411.

Zhang, Lei, Liu, Tao, Gao, Wenfeng, and Lin, Wenxian (2012) Comparison of performance of four commonly-used turbulence models in numerically simulating two-dimensional backward-facing step turbulent flows. Journal of Yunnan Normal University, 32 (4). pp. 8-16.

Gummow, R.J., Sharma, N., Peterson, V.K., and He, Y. (2012) Crystal chemistry of the Pmnb polymorph of Li2MnSiO4. Journal of Solid State Chemistry, 188. pp. 32-37.

Wei, Shengxian, Li, Ming, Lin, Wenxian, Ji, Xu, Yu, Qiongfen, Luo, Xi, and Long, Xing (2012) Mass area ratio of solar hot water systems integrated with so[u]th-facade of high-rise residential buildings. Acta Energiae Solaris Sinica, 33 (4). pp. 663-669.

Brodie, Graham, Ahmed, Berhan M., and Jacob, Mohan V. (2012) Microwave characterisation and detection of wood decay. World Journal of Engineering, 9 (4). pp. 265-272.

Wang, Vincent Z., Ginger, John D., and Narayan, Krishneel (2012) Intralaminar and interlaminar fracture characterization in glued-laminated timber members using image analysis. Engineering Fracture Mechanics, 82. pp. 73-84.

Ting, Ching Hung, Sivakugan, Nagaratnam, and Shukla, Sanjay Kumar (2012) Laboratory simulation of the stresses within inclined stopes. Geotechnical Testing Journal, 35 (2). pp. 280-294.

Sreekanth, J., and Datta, Bithin (2012) Comment on "Artificial neural network model as a potential alternative for groundwater salinity forecasting" by Pallavi Banerjee et al. [J. Hydrol. 398 (2011) 212–220]. Journal of Hydrology, 420-421. pp. 419-420.

Song, Xiao-Fei, and Yin, Ling (2012) Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 534. pp. 193-202.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2012) Acid mist and bubble size correlation in copper electrowinning. Hydrometallurgy, 113-114. pp. 39-41.

Ting, Ching Hung, Sivakugan, Nagaratnam, Read, Wayne, and Shukla, Sanjay Kumar (2012) Analytical method to determine vertical stresses within a granular material contained in right vertical prisms. International Journal of Geomechanics, 12 (1). pp. 74-79.

Surawski, Nicholas C., Ristovski, Zoran, Brown, Richard J., and Situ, Rong (2012) Gaseous and particle emissions from an ethanol fumigated compression ignition engine. Energy Conversion and Management, 54 (1). pp. 145-151.

Bodisco, Timothy, Reeves, Robert, Situ, Rong, and Brown, Richard (2012) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26. pp. 305-314.

Disfani, M.M., Arulrajah, A., Bo, M.W., and Sivakugan, N. (2012) Environmental risks of using recycled crushed glass in road applications. Journal of Cleaner Production, 20 (1). pp. 170-179.

Holmes, J.D., and Ginger, J.D. (2012) Internal pressures - The dominant windward opening case: a review. Journal of Wind Engineering and Industrial Aerodynamics, 100 (1). pp. 70-76.

Gummow, R.J., Sharma, N., Peterson, V.K., and He, Y. (2012) Synthesis, structure, and electrochemical performance of magnesium-substituted lithium manganese orthosilicate cathode materials for lithium-ion batteries. Journal of Power Sources, 197. pp. 231-237.

Lizama Allende, K., Fletcher, T.D., and Sun, G. (2012) The effect of substrate media on the removal of arsenic, boron and iron from an acidic wastewater in planted column reactors. Chemical Engineering Journal, 179. pp. 119-130.

Lu, Jun, and Zahedi, Ahmad (2012) Air supply control for maximum efficiency point tracking in fuel cell systems. Journal of Renewable and Sustainable Energy, 4 (3). pp. 1-14.

Bass, Adrian M., Bird, Michael I., Morrison, Marshall J., and Gordon, Jeremy (2012) CADICA: Continuous Automated Dissolved Inorganic Carbon Analyzer with application to aquatic carbon cycle science. Limnology and Oceanography: Methods, 10. pp. 10-19.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2012) Consolidation behavior of soils subjected to asymmetric initial excess pore pressure distributions with one-way drainage. International Journal of Geomechanics, 12 (3). pp. 318-322.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2012) Efficient surface modification of biomaterial to prevent biofilm formation and the attachment of microorganisms. Applied Microbiology and Biotechnology, 95 (2). pp. 299-311.

Zahedi, Ahmad (2012) Electric vehicle as distributed energy storage resource for future smart grid. In: Proceedings of the 22nd Australasian Universities Power Engineering Conference, pp. 1-4. From: Australasian Universities Power Engineering Conference 2012, 26-29 September 2012, Bali, Indonesia.

Anderson, L.J., and Jacob, M.V. (2012) Electrical characterisations of plasma polyermised linalyl acetate. Materials Science and Engineering B: Advanced Functional Solid-state Materials, 177 (3). pp. 311-315.

Jacob, Mohan V., Bazaka, Kateryna, Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2012) Electron-blocking hole-transport polyterpenol thin films. Chemical Physics Letters, 528. pp. 26-28.

Jegatheesan, V., Shu, L., Keir, G., and Phong, D.D. (2012) Evaluating membrane technology for clarification of sugarcane juice. Reviews in Environmental Science and Bio-Technology, 11 (2). pp. 109-124.

Sheehan, Madoc, Schneider, Phil, and Desha, Cheryl (2012) Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia. Chemistry Education Research and Practice, 13 (2). pp. 112-119.

Wang, Vincent Z., Pease, Trent, and Robinson, Sean (2012) Implications of selected parameter estimation schemes to reinforced concrete member reliability analysis with incomplete structural appraisal data. In: Proceedings of the 37th Conference on Our World in Concrete & Structures, pp. 435-442. From: The 37th Conference on Our World in Concrete & Structures, 29-31 August 2012, Singapore.

Ham, Jonathan, Devietti, Jenna, Mathan, Bobby Kannan, and Jegatheesan, Veeriah (2012) Improving drinking water distribution systems. Sustainability and Infrastructure, 3. pp. 14-15.

Lu, Jun, and Zahedi, Ahmad (2012) Model predictive control for PEMFC based on least square support vector machine. In: Asia Pacific Power and Energy Engineering Conference (APPEEC), 2012, pp. 1-4. From: Power and Energy Engineering Conference (APPEEC), 2012, 27-29 March 2012., Shanghai, China.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta A., Watson, Gregory S., and Yin, Ling (2012) Nanoscale study of cartilage surfaces using atomic force microscopy. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (12). pp. 899-910.

Kannan, M. Bobby, and Saji, V.S. (2012) Nanoscience and biomaterial corrosion control. In: Saji, Viswanathan S., and Cook, Ronald, (eds.) Corrosion Protection and Control Using Nanomaterials. Elsevier, Cambridge, UK, pp. 375-392.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, and Armfield, Steven W. (2012) Onset asymmetry and three-dimensionality in transitional round fountains in homogeneous fluid. In: Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics, pp. 1-2. From: ICTAM 2012: 23rd International Congress of Theoretical and Applied Mechanics, 19-24 August 2012, Beijing, China.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2012) Optimal identification of groundwater pollution sources using feedback monitoring information: a case study. Environmental Forensics, 13 (2). pp. 140-153.

Sreekanth, J., Datta, Bithin, and Mohapatra, Pranab K. (2012) Optimal short-term reservoir operation with integrated long-term goals. Water Resources Management, 26 (10). pp. 2833-2850.

Mahmud, Hasan, Hill, Blair, Gao, Wenfeng, Lin, Wenxian, He, Yinghe, and Armfield, Steven (2012) PIV Study of behavior of interaction of twin fountains in homogenous fluid. In: Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics, pp. 1-2. From: ICTAM 2012: 23rd International Congress of Theoretical and Applied Mechanics, 19-24 August 2012, Beijing, China.

Kikkert, Cornelis Jan (2012) A PLC frequency model of 3 phase power distribution transformers. In: 2012 IEEE Third International Conference on Smart Grid Communications (SmartGridComm), pp. 205-210. From: 2012 IEEE Third International Conference on Smart Grid Communications (SmartGridComm), 5-8 November 2012, Tainan City, Taiwan.

Alabbasi, Alyaa, Liyanaarachchi, S., and Kannan, M.B. (2012) Polylactic acid coating on a biodegradable magnesium alloy: an in vitro degradation study by electrochemical impedance spectroscopy. Thin Solid Films, 520 (23). pp. 6841-6844.

Lu, Jun, and Zahedi, Ahmad (2012) Predictive control of PEMFC based on a combined empirical and mechanistic model. In: Proceedings of the 2012 International Conference on Power System Technology, pp. 1-6. From: POWERCON 2012, 30 October - 2 November 2012, Auckland, New Zealand.

Shukla, S.K., Sivakugan, N., and Das, B.M. (2012) Slopes - stabilisation. In: Shukla, Sanjay Kumar, (ed.) Handbook of Geosynthetic Engineering: geosynthetics and their applications. ICE Publishing, London, pp. 223-243.

Lu, Jun, and Zahedi, Ahmad (2012) Support vector machine based predictive controller with swarm intelligence for PEMFC. In: Proceedings of the 22nd Australasian Universities Power Engineering Conference, pp. 1-6. From: Australasian Universities Power Engineering Conference 2012, 26-29 September 2012, Bali, Indonesia.

Singh, Devendar N., Sivakugan, Siva, and Vanapalli, Sai K. (2011) Advances in instrumentation and monitoring in geotechnical engineering. Advances in Civil Engineering, 2011. pp. 1-2.

Jacob, Mohan (2011) Non-Linear Surface Impedance of YBCO Superconductors. Lambert Academic Publishing, Germany.

Krupka, Jerzy, and Mazierska, Janina (2011) Current developments in contactless measurements of high quality materials for microelectronics and nanotechnology employing dielectric resonator techniques. In: Proceedings of the 2011 IEEE Region 10 Conference, pp. 1126-1130. From: TENCON 2011: 2011 IEEE Region 10 Conference, 22-24 November 2011, Bali, Indonesia.

Situ, R., Hibiki, T., Brown, R.J., Hazuku, T., and Takamasa, T. (2011) Flow regime transition criteria for two-phase flow at reduced gravity conditions. International Journal of Multiphase Flow, 37 (9). pp. 1165-1177.

Mathan, M. Bobby, Dietzel, W., and Zettler, R. (2011) In vitro degradation behaviour of a friction stir processed magnesium alloy. Journal of Materials Science: Materials in Medicine, 22 (11). pp. 2397-2401.

Holmes, David W., Williams, John R., and Tilke, Peter (2011) A framework for parallel computational physics algorithms on multi-core: SPH in parallel. Advances in Engineering Software, 42 (11). pp. 999-1008.

Das, Sarat Kumar, Samui, Pijush, Kim, Dookie, Sivakugan, N., and Biswal, Rajanikanta (2011) Lateral displacement of liquefaction induced ground using least square support vector machine. International Journal of Geotechnical Earthquake Engineering, 2 (2). pp. 29-39.

Ding, Xiang, Gao, Wenfeng, Liu, Tao, and Lin, Wenxian (2011) Thermal performance of solar water heater hanged on balcony wall with separate pressure bearing. Transactions of the CSAE (Chinese Society of Agricultural Engineering), 27 (10). pp. 233-237.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Peng, Zhongxiao, and Li, Li (2011) Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method. Mechanical Systems and Signal Processing, 25 (7). pp. 2589-2607.

Singh, Shailesh, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Arching in inclined and vertical mine stopes. Geotechnical and Geological Engineering, 29 (5). pp. 685-693.

Kikkert, Keith (2011) Calculating radiation from power lines for power line communications. In: Perutka, Karel, (ed.) MATLAB for Engineers - Applications in Control, Electrical Engineering, IT and Robotics. InTech, Rijeka, Croatia, pp. 223-246.

Das, Sarat Kumar, Biswal, Rajani Kanta, Sivakugan, N., and Das, Bitanjaya (2011) Classification of slopes and prediction of factor of safety using differential evolution neural networks. Environmental Earth Sciences, 64 (1). pp. 201-210.

Bazaka, Kateryna, Crawford, Russell J., and Ivanova, Elena P. (2011) Do bacteria differentiate between degrees of nanoscale surface roughness? Biotechnology Journal, 6 (9). pp. 1103-1114.

Kannan, M. Bobby, and He, Yinghe (2011) In-vitro degradation behavior of biodegradable polymer coated magnesium alloy. In: Proceedings of CHEMECA 2011, pp. 1-7. From: CHEMECA 2011: engineering a better world, 18-21 September 2011, Sydney, NSW, Australia.

Zahedi, Ahmad, and Lu, Jun (2011) Modelling and control of PEMFC based on support vector machine. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-6. From: AUPEC 2011 Australasian Universities Power Engineering Conference, 25-28 September 2011, Brisbane, QLD, Australia.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2011) A critical reappraisal of the average degree of consolidation. Geotechnical and Geological Engineering, 29 (5). pp. 873-879.

Jayasinghe, N.C., and Ginger, J.D. (2011) Vulnerability of roofing components to wind loads. Wind & Structures, 14 (4). pp. 321-335.

Badenoch , Paul R., Coster, Douglas J., Sadlon, Tania A. , Klebe, Sonja , Stirling, John W. , Jaunzems, Alvis E. , and Mazierska, Janina E. (2011) Deep microsporidial keratitis after keratoconjunctivitis. Clinical and Experimental Ophthalmology, 39 (6). pp. 577-580.

Krupka, Jerzy, Nguyen, Danh, and Mazierska, Janina (2011) Microwave and RF methods of contactless mapping of the sheet resistance and the complex permittivity of conductive materials and semiconductors. Measurement Science and Technology, 22 (8). pp. 1-6.

Jha, Manish K., and Datta, Bithin (2011) Simulated annealing based simulation-optimization approach for identification of unknown contaminant sources in groundwater aquifers. Desalination and Water Treatment, 32 (1-3). pp. 79-85.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2011) The sizing of oxygen bubbles in copper electrowinning. Hydrometallurgy, 109 (1-2). pp. 168-174.

Shukla, Sanjay Kumar, Gupta, Ashish, and Sivakugan, Nagaratnam (2011) Analysis of circular elastic plate resting on Pasternak foundation by strain energy approach. Geotechnical and Geological Engineering, 29 (4). pp. 613-618.

Liu, Xueping, Gao, Wenfeng, Xu, Ling, Lin, Wenxian, Ding, Xiang, Dai, Wei, and Liu, Tao (2011) Comparative study on the two testing methods to obtain the heat gain for flat-plate solar water heaters with vertical storage tanks. Journal of Yunnan Normal University, 31 (4). pp. 36-40.

Tian, Y., Peng, Z., Gorton, D., Xiao, Y., and Ketheesan, N. (2011) Immunohistochemical analysis of structural changes in collagen for the assessment of osteoarthritis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (7). pp. 680-687.

Steward, T., Sivakugan, N., Shukla, S.K., and Das, B.M. (2011) Taylor's slope stability charts revisted. International Journal of Geomechanics, 11 (4). pp. 348-352.

Kannan, M. Bobby, Blawert, C., and Dietzel, W. (2011) Electrochemical corrosion behaviour of ZE41 and QE22 magnesium alloys. Materials Science Forum, 690. pp. 385-388.

Wei, Shengxian, Sun, Yanlin, Li, Ming, Lin, Wenxian, Zhao, Derong, Shi, Youming, and Yang, Huimin (2011) Indoor thermal environment evaluations and parametric analyses in naturally ventilated buildings in dry season using a field survey and PMVe-PPDe model. Building and Environment, 46 (6). pp. 1275-1283.

Molla, M.M., Saha, S.C., Khan, M.A.I., and Hossain, M.A. (2011) Radiation effects on natural convection laminar flow from a horizontal circular cylinder. Desalination and Water Treatment, 30 (1-3). pp. 89-97.

Lovisa, J., Read, W.W, and Sivakugan, N. (2011) Degree of consolidation - peaked initial excess pore water pressure distributions. In: Computational Methods for Geomechanics: Frontiers and New Applications, pp. 100-105. From: IACMAG 2011 13th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 9-11 May 2011, Melbourne, VIC, Australia.

Tiranuntakul, M., Schneider, P.A., and Jegatheesan, J. (2011) Assessments of critical flux in a pilot-scale membrane bioreactor. Bioresource Technology, 102 (9). pp. 5370-5374.

Navaratna, Dimuth, and Jegatheesan, Veeriah (2011) Implications of short and long term critical flux experiments for laboratory-scale MBR operations. Bioresource Technology, 102 (9). pp. 5361-5369.

Khan, S. Jamal, Ilyas, Shazia, Javid, Sadaf, Visvanathan, C., and Jegatheesan, V. (2011) Performance of suspended and attached growth MBR systems in treating high strength synthetic wastewater. Bioresource Technology, 102 (9). pp. 5331-5336.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2011) Plasma assisted surface modification of organic biopolymers to prevent bacterial attachment. Acta Biomaterialia, 7 (5). pp. 2015-2028.

Virkutyte, Jurate, Rokhina, Ekaterina, Lens, Piet, and Jegatheesan, Veeriah (2011) The effect of electrodialytic treatment and Na2H2EDTA addition on methanogenic activity of copper-amended anaerobic granular sludge: treatment costs and energy consumption. Bioresource Technology, 102 (9). pp. 5541-5544.

Bazaka, Kateryna, Jacob, Mohan V., and Bowden, Bruce F. (2011) Optical and chemical properties of polyterpenol thin films deposited via plasma-enhanced chemical vapor deposition. Journal of Materials Research, 26 (8). pp. 1018-1025.

Walter, R., and Kannan, M. Bobby (2011) Influence of surface roughness on the corrosion behaviour of magnesium alloy. Materials & Design, 32 (4). pp. 2350-2354.

Zahedi, A. (2011) Review of modelling details in relation to low-concentration solar concentrating photovoltaic. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1609-1614.

Saha, Suvash C., Patterson, John C., and Lei, Chengwang (2011) Scaling of natural convection of an inclined flat plate: sudden cooling condition. Journal of Heat Transfer, 133 (4). pp. 1-9.

Williamson, Nicholas, Armfield, Steven W., and Lin, Wenxian (2011) Forced turbulent fountain flow behaviour. Journal of Fluid Mechanics, 671. pp. 535-558.

Shukla, Sanjay K., Sivakugan, Nagaratnam, and Das, Braja M. (2011) A state-of-the-art review of geosynthetic-reinforced slopes. International Journal of Geotechnical Engineering, 5 (1). pp. 17-32.

Sheehan, M.E., and Donaldson, M. (2011) Validation and optimization of an equilibrium model of a hot-lime-softening treatment system. Journal of Environmental Engineering, 137 (3). pp. 205-212.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2011) Identification of unknown groundwater pollution sources using classical optimization with linked simulation. Journal of Hydro-Environment Research, 5 (1). pp. 25-36.

Molla, Md. Mamun, Saha, Suvash C., and Hossain, Md. Anwar (2011) Radiation effect on free convection laminar flow along a vertical flat plate with streamwise sinusoidal surface temperature. Mathematical and Computer Modelling, 53 (5-6). pp. 1310-1319.

Walter, R., and Kannan, M. Bobby (2011) In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Materials Letters, 65 (4). pp. 748-750.

Kannan, M. Bobby, Raman, R.K. Singh, Witte, F., Blawert, C., and Dietzel, W. (2011) Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 96B (2). pp. 303-309.

Saha, S. C. (2011) Unsteady natural convection in a triangular enclosure under isothermal heating. Energy and Buildings, 43 (2-3). pp. 695-703.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Crawford, Russell J., and Ivanova, Elena P. (2011) The effect of polyterpenol thin film surfaces on bacterial viability and adhesion. Polymers, 3 (1). pp. 388-404.

Lei, Chengwang, Peng, Zhongxiao, Day, Thomas, Yan, Xinping, Bai, Xiuqin, and Yuan, Chengqing (2011) Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers. International Communications in Heat and Mass Transfer, 38 (1). pp. 25-30.

Kanta, A-F., Montavon, G., Berndt, C.C., Planche, M-P., and Coddet, C. (2011) Intelligent system for prediction and control: application in plasma spray process. Expert Systems with Applications, 38 (1). pp. 260-271.

Zahedi, A. (2011) Maximizing solar PV energy penetration using energy storage technology. Renewable and Sustainable Energy Reviews, 15 (1). pp. 866-870.

Ting, Ching Hung, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Arching in soils applied to inclined mine stopes. International Journal of Geomechanics, 11 (1). pp. 29-35.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta, Watson, Gregory, Morris, B.N, and Rayner, B.A. (2011) Atomic force microscopy investigation on Young's modulus of cartilage for osteoarthritis study. In: Mathew, Joseph, Ma, Lin, Tan, Andy, Weijnen, Margot, and Lee, Jay, (eds.) Engineering asset management and infrastructure sustainability. WorId Congress on Engineering Asset Management . Springer, London, pp. 1019-1025.

Bazaka, Kateryna, Crawford, Russell J., Nazarenko, Evgeny L., and Ivanova, Elena P. (2011) Bacterial extracellular polysaccharides. In: Linke , Dirk, and Goldman, Adrian, (eds.) Bacterial Adhesion: Chemistry, Biology and Physics. Advances in Experimental Medicine and Biology, 715 . Springer, London, UK, pp. 213-226.

Sreekanth, J., and Datta, Bithin (2011) Comparative evaluation of genetic programming and neural network as potential surrogate models for coastal aquifer management. Water Resource Management, 25 (13). pp. 3201-3218.

Bazaka, Kateryna, and Jacob, Mohan V. (2011) Complex permittivity measurements of RF plasma polymerized polyterpenol organic thin films employing split post dielectric resonator. Journal of Polymer Engineering, 31 (2-3). pp. 73-75.

Sreekanth, J., and Datta, Bithin (2011) Coupled simulation-optimization model for coastal aquifer management using genetic programming-based ensemble surrogate models and multiple-realization optimization. Water Resources Research, 47. pp. 1-17.

Brodie, Graham, Ahmed, Berhan M., and Jacob, Mohan V. (2011) Detection of decay in wood using microwave characterization. In: Proceedings of the Asia-Pacific Microwave Conference 2011, pp. 1754-1757. From: APMC 2011 Asia-Pacific Microwave Conference, 5-8 December 2011, Melbourne, VIC, Australia.

Zahedi, A. (2011) Developing a linear model for estimating the capacity factor of wind turbines. In: Proceedings of the Australasian Universities Power Engineering Conference, pp. 1-5. From: AUPEC 2011 Australasian Universities Power Engineering Conference, 25-28 September 2011, Brisbane, QLD, Australia.

Zahedi, Ahmad (2011) Developing a system model for future smart grid. In: Proceedings of IEEE PES Innovative Smart Grid Technologies Asia 2011 Conference, pp. 1-5. From: IEEE PES ISGT Asia 2011 - IEEE Power and Energy Society’s Innovative Smart Grid Technologies Asia 2011 Conference, 13-16 November 2011, Perth, WA, Australia.

Jegatheesan, V., Shu, L., Nghiem, L.D., Shon, H.K., and Chang, Chia-Yuan (2011) Editorial. Desalination and Water Treatment, 32. pp. 1-3.

Anderson, Liam, Jacob, Mohan, Barra, M., Di Girolamo, F.V., and Cassinese, A. (2011) Effect of a plasma polymerised linalyl acetate dielectric on the optical and morphological properties of an n-type organic semiconductor. Applied Physics A: Materials Science and Processing, 105 (1). pp. 95-102.

Kikkert, Cornelis Jan (2011) Effect of couplers and line branches on PLC communication channel response. In: Proceedings of 2011 IEEE International Conference on Smart Grid Communications, pp. 327-332. From: 2011 IEEE International Conference on Smart Grid Communications, 17-20 October 2011, Brussels, Belgium.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device. Physics Procedia, 14. pp. 62-66.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2011) Emergent BCM via neuromorphic VLSI synapses with STDP. In: Australian Workshop on Computational Neuroscience, p. 31. From: 5th Australian Workshop on Computational Neuroscience, 13-14 December 2011, University of Western Sydney, Campbelltown, NSW.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2011) Fault detection and diagnosis of a gearbox in marine propulsion systems using bispectrum analysis and artificial neural networks. Journal of Marine Science and Application, 10 (1). pp. 17-24.

Peng, Jianhui, Song, Xiao-Fei, and Yin, Ling (2011) Forecasting of cutting forces in dental adjustment of ceramic prostheses using an artificial neural network. Advanced Materials Research, 152-153. pp. 1687-1690.

Yin, Ling, and Song, Xiao-Fei (2011) Grindability of dental ceramics in the in vitro oral regime. International Journal of Abrasive Technology, 4 (3). pp. 204-222.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Investigation of interfacial charging and discharging in double-layer pentacene-based metal-insulator-metal device with polyterpenol blocking layer using electric field induced second harmonic generation. Chemical Physics Letters, 503 (1-3). pp. 105-111.

Lovisa, J., Arulrajah, A., Ameratunga, J., Boyle, P., Sivakugan, N., and Read, W.W. (2011) Land reclamation: a review of initial consolidation conditions. In: Proceedings of the 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (2), pp. 1629-1634. From: 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, 23-27 May 2011, Hong Kong, China.

Sudheendran, K., Raju, K.C. James, and Jacob, Mohan V. (2011) Low temperature dielectric properties of Ca0.7Nd0.3Ti0.7Al0.3O3 microwave ceramics. Journal of the Australian Ceramic Society, 47 (2). pp. 65-68.

Kikkert, Cornelis Jan (2011) MV to LV Transformer PLC Bypass Coupling Networks for a Low Cost Smart Grid Rollout. In: Proceedings of 2011 IEEE PES Innovative Smart Grid Technologies, pp. 1-6. From: 2011 IEEE PES Innovative Smart Grid Technologies, 13-16 November 2011, Perth, WA, Australia.

Das, Sarat Kumar, Samui, Pijush, Khan, Shakilu Zama, and Sivakugan, Nagarathnam (2011) Machine learning techniques applied to prediction of residual strength of clay. Central European Journal of Geosciences, 3 (4). pp. 449-461.

Anderson, L., and Jacob, M. (2011) Microwave characterization of a novel, environmentally friendly, plasma polymerized organic thin film. Physics Procedia, 14. pp. 87-90.

Brodie, Graham, Harris, Gerard, Jacob, Mohan V., Sheehan, Madoc, and Yin, Ling (2011) Microwave modification of sugar cane to enhance juice extraction during milling. Journal of Microwave Power and Electromagnetic Energy, 45 (4). pp. 178-187.

Brodie, G., Jacob, M.V., Sheehan, M., Yin, L., Cushion, M., and Harris, G. (2011) Microwave modifications of sugar cane to enhance juice extraction during milling. International Sugar Journal, 113 (1354). pp. 714-718.

Bazaka, Kateryna, and Jacob, Mohan V. (2011) Nanotribological and nanomechanical properties of plasma-polymerized polyterpenol thin films. Journal of Materials Research, 26 (23). pp. 2952-2961.

Tian, Y., Wang, J., Peng, Z., and Jiang, X. (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378.

Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Luo, Chuanxu (2011) Numerical study on mixing characteristics of hot water inside the storage tank of a solar system with different inlet velocities of the supply cold water. Procedia Environmental Sciences, 11. pp. 1153-1163.

Anderson, L., Di Girolamo, F., Barra, M., Cassinese, A., and Jacob, M.V. (2011) Optical properties of thermally evaporated PDI-8CN2 thin films. Physics Procedia, 14. pp. 29-33.

Sreekanth, J., and Datta, Bithin (2011) Optimal combined operation of production and barrier wells for the control of saltwater intrusion in coastal groundwater well fields. Desalination and Water Treatment, 32 (1-3). pp. 72-78.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2011) Optimisation approach for pollution source identification in groundwater: an overview. International of Environment and Waste Management, 8 (1-2). pp. 40-61.

Williams, John R., Holmes, David, and Tilke, Peter (2011) Parallel computation particle methods for multi-phase fluid flow with application oil reservoir characterization. In: Oñate, Eugenio, and Owen, Roger, (eds.) Particle-Based Methods: fundamentals and applications. Computational Methods in Applied Sciences, 25 . Springer, Dordrecht, The Netherlands, pp. 113-134.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2011) Plasma polymerisation and retention of antibacterial properties of terpinen-4-ol. In: Proceedings of the International Conference on Antimicrobial Research, pp. 175-179. From: ICAR 2010 International Conference on Antimicrobial Research, 3-5 November 2010, Valladolid, Spain.

Huang, Han, Zhou, Libo, and Yin, Ling (2011) Polishing using flexible abrasive tools and loose abrasives. In: Jackson, Mark J., and Davim, J. Paulo, (eds.) Machining with Abrasives. Springer, New York, NY, USA, pp. 345-384.

Kikkert, Cornelis Jan (2011) Power transformer modelling and MV PLC coupling networks. In: Proceedings of 2011 IEEE PES Innovative Smart Grid Technologies, pp. 1-6. From: 2011 IEEE PES Innovative Smart Grid Technologies, 13-16 November 2011, Perth, WA, Australia.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Site investigation and in situ tests. In: Das, Braja M., (ed.) Geotechnical Engineering Handbook. J. Ross Publishing, Fort Lauderdale, FL, USA, 10.1-10.78.

Zahedi, Ahmad (2011) Smart grid opportunities & challenges for power industry to manage the grid more efficiently. In: Proceedings of Asia-Pacific Power and Energy Engineering Conference, pp. 1-4. From: APPEEC 2011 Asia-Pacific Power and Energy Engineering Conference, 25-28 March 2011, Wuhan, China.

Kannan, M. Bobby, Bala Srinivasan, P., and Raja, V.S. (2011) Stress corrosion cracking (SCC) of aluminium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 307-340.

Kannan, M. Bobby, and Shukla, P.K. (2011) Stress corrosion cracking (SCC) of copper and copper-based alloys. In: Raja, V.S., and Shoji, Tetsuo, (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 409-426.

Joseph, Tony, Sebastian, Mailadil, Jantunen, Heli, Jacob, Mohan, and Sreemoolanadhan, Hariharaiyer (2011) Tape casting and dielectric properties of Sr2ZnSi2O7-based ceramic–glass composite for low-temperature co-fired ceramics applications. International Journal of Applied Ceramic Technology, 8 (4). pp. 854-864.

Das, Braja M., and Sivakugan, Nagaratnam (2011) Vibrations of foundations. In: Das, Braja M., (ed.) Geotechnical Engineering Handbook. J. Ross Publishing, Fort Lauderdale, FL, USA, 11.1-11.30.

Sreekanth, J., and Datta, Bithin (2011) Wavelet and cross-wavelet analysis of groundwater quality signals of saltwater intruded coastal aquifers. In: Proceedings of the 2011 World Environmental and Water Resources Congress (414), pp. 846-853. From: World Environmental and Water Resources Congress 2011: Bearing Knowledge for Sustainability, 22-26 May 2011, Palm Springs, CA, USA.

Zahedi, A. (2011) A review of drivers, benefits, and challenges in integrating renewable energy sources into electricity grid. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4775-4779.

Bednarz, Tomasz P., Lin, Wenxian, and Saha, Suvash (2010) Scaling of thermo-magnetic convection. In: Proceedings of the 13th Asian Congress on Fluid Mechanics, pp. 1-3. From: ACFM 2010 13th Asian Congress on Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.

Situ, Rong, Brown, Richard J., and Loberto, Anthony (2010) Experimental study of the concentration field of discharge from a boat propeller. Environmental Fluid Mechanics, 10 (6). pp. 657-675.

Sreekanth, J., and Datta, Bithin (2010) Multi-objective management of saltwater intrusion in coastal aquifers using genetic programming and modular neural network based surrogate models. Journal of Hydrology, 393 (3-4). pp. 245-256.

Wei, Shengxian, Li, Ming, Ji, Xu, Lin, Wenxian, Zheng, Tufeng, Li, Guoliang, and Luo, Xi (2010) Aspect ratio and spacing optimization of a solar flat-plate collector unit. Transactions of the Chinese Society of Agricultural Engineering (CSAE), 26 (11). pp. 225-230.

Ali, M.M. Younus, Arulrajah, A., Sivakugan, N., and Bo, M. W. (2010) Compaction testing of recycled glass blended with recycled crushed concrete for footpath applications. In: Proceedings of the Sixth International Congress on Environmental Geotechnics (2), pp. 1114-1119. From: Sixth International Congress on Environmental Geotechnics, 8-12 November 2010, Delhi, India.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A fault diagnosis approach for gears using multidimensional features and intelligent classifier. Noise and Vibration Worldwide, 41 (10). pp. 76-86.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A new method of nonlinear feature extraction for multi-fault diagnosis of rotor systems. Noise and Vibration Worldwide, 41 (10). pp. 29-37.

Cheng, Xinjian, Liu, Ruilan, and He, Yinghe (2010) A simple method for the preparation of monodisperse protein-loaded microspheres with high encapsulation efficiencies. European Journal of Pharmaceutics and Biopharmaceutics, 76 (3). pp. 336-341.

Zahedi, Ahmad (2010) Australian renewable energy progress. Renewable and Sustainable Energy Reviews, 14 (8). pp. 2208-2213.

Kannan, M. Bobby, and Raja, V.S (2010) Enhancing the localized corrosion resistance of high strength 7010 Al-alloy. Advanced Materials Research, 138. pp. 1-6.

Jacob, Mohan, and Bazaka, Kateryna (2010) Fabrication of Electronic Materials from Australian Essential Oils. Report. Australian Government: Rural Industries Research and Development Corporation, Barton, ACT, Australia.

Shukla, S.K, Sivakugan, N., and Singh, A.K. (2010) Analytical model for fiber-reinforced granular soils under high confining stresses. Journal of Materials in Civil Engineering, 22 (9). pp. 935-942.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2010) Consolidation behaviour of soils subjected to asymmetric initial excess pore pressure distributions. International Journal of Geomechanics, 10 (5). pp. 181-189.

Saha, Suvash C., Patterson, John C., and Lei, Chengwang (2010) Natural convection boundary-layer adjacent to an inclined flat plate subject to sudden and ramp heating. International Journal of Thermal Sciences, 49 (9). pp. 1600-1612.

Song, X-F., and Yin, L. (2010) Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic. Journal of Oral Rehabilitation, 37 (9). pp. 680-691.

Wang, Liuling, Xu, Yongfeng, Li, Ming, Xiang, Ming, Wang, Yunfeng, Lin, Wenxian, and Wei, Shengxian (2010) The experimental study of trough concentrating solar photovoltaic/thermal system. Acta Energiae Solaris Sinica, 31 (9). pp. 1154-1160.

Das, Sarat Kumar, and Sivakugan, Nagaratnam (2010) Discussion of "Intelligent computing for modelling axial capacity of pile foundations". Canadian Geotechnical Journal, 47 (8). pp. 928-930.

Wang, Yuanfang, Shu, Li, Jegatheesan, Veeriah, and Gao, Baoyu (2010) Removal and adsorption of diuron through nanofiltration membrane: the effects of ionic environment and operating pressures. Separation and Purification Technology, 74 (2). pp. 236-241.

Lyons, Emma, and Wang, Vincent Z. (2010) Effect of material degradation models on the safety performance of reinforced concrete members subject to extreme loading. In: Proceedings of the 35th Conference on Our World in Concrete & Structures, pp. 17-24. From: 35th Conference on Our World in Concrete & Structures, 25-27 August 2010, Singapore.

Jacob, M.V., Bazaka, K., Weis, M., Taguchi, D., Manaka, T., and Iwamoto, M. (2010) Fabrication and characterization of polyterpenol as an insulating layer and incorporated organic field effect transistor. Thin Solid Films, 518 (21). pp. 6123-6129.

Holmes, D.W., and Loughran, J.G. (2010) Numerical aspects associated with the implementation of a finite strain, elasto-viscoelastic–viscoplastic constitutive theory in principal stretches. International Journal for Numerical Methods in Engineering, 83 (3). pp. 366-402.

de Vasconcellos, João Flávio Vieira, Singh, Shailesh, and Sivakugan, Nagaratnam (2010) Sensitivity analysis of time dependent settlements in hydraulic fills. Geotechnical and Geological Engineering, 28 (4). pp. 351-360.

Kannan, M. Bobby, and Raman, R.K. Singh (2010) A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques. Journal of biomedical materials research, 93a (3). pp. 1050-1055.

Bazaka, Kateryna, and Jacob, Mohan V. (2010) Effect of iodine doping on surface and optical properties of polyterpenol thin films. Materials Science Forum, 654-656. pp. 1764-1767.

Song, Xiao-Fei, and Yin, Ling (2010) Induced damage zone in micro-fine dental finishing of a feldspathic porcelain. Medical Engineering and Physics, 32 (5). pp. 417-422.

Bazaka, Kateryna, and Jacob, Mohan V. (2010) Post-deposition ageing reactions of plasma derived polyterpenol thin films. Polymer Degradation and Stability, 95 (6). pp. 1123-1128.

Singh, S., Sivakugan, N., and Shukla, S.K. (2010) Can soil arching be insensitive to phi? International Journal of Geomechanics, 10 (3). pp. 124-128.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2010) Discussion of "Fiber-reinforced flyash subbases in rural roads," by Praveen Kumar and Shailendra Pratap Singh. Journal of Transportation Engineering, 136 (4). pp. 400-401.

Kikkert, Cornelis Jan (2010) The effect of filters in mobile radio systems. EE: Evaluation Engineering, 49 (4). pp. 34-38.

Morgan, Blain A., Shukla, Sanjay K., and Sivakugan, Nagaratnam (2010) An experimental study on the additional settlement of footing resting on granular soils by water table rise. Soils and Foundations, 50 (2). pp. 319-324.

Kannan, M. Bobby (2010) Influence of microstructure on the in-vitro degradation behaviour of magnesium alloys. Materials Letters, 64 (6). pp. 739-742.

Lee, A., and Sheehan, M.E. (2010) Development of a geometric flight unloading model for flighted rotary dryers. Powder Technology, 198 (3). pp. 395-403.

Anderson, L.J., and Jacob, M.V. (2010) Effect of RF power on the optical and morphological properties of RF plasma polymerised linalyl acetate thin films. Applied Surface Science, 256 (10). pp. 3293-3298.

Virkutyte, Jurate, Rokhina, Ekaterina, and Jegatheesan, Veeriah (2010) Optimisation of Electro-Fenton denitrification of a model wastewater using a response surface methodology. Bioresource Technology, 101 (5). pp. 1440-1446.

Lovisa, Julie, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2010) Behaviour of prestressed geotextile-reinforced sand bed supporting a loaded circular footing. Geotextiles and Geomembranes, 28 (1). pp. 23-32.

Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2010) Influence of enzymatic maceration on the microstructure and microhardness of compact bone. Biomedical Materials, 5 (1). pp. 1-6.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2010) Characteristics of instability of radiation-induced natural convection in shallow littoral waters. International Journal of Thermal Sciences, 49 (1). pp. 170-181.

Mathan, M. Bobby, and Raja, V.S. (2010) Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization. Engineering Fracture Mechanics, 77 (2). pp. 250-256.

Dhar, Anirban, and Datta, Bithin (2010) Logic-based design of groundwater monitoring network for redundancy reduction. Journal of Water Resources Planning and Management, 136 (1). pp. 88-94.

Dombrowski, Richard D., Litster, James D., Wagner, Norman J., and He, Yinghe (2010) Modeling the crystallization of proteins and small organic molecules in nanoliter drops. AIChE Journal, 56 (1). pp. 79-91.

Easton, Christopher D., and Jacob, Mohan V. (2010) Solubility and adhesion characteristics of plasma polymerized thin films derived from lavandula angustifolia essential oil. Journal of Applied Polymer Science, 115 (1). pp. 404-415.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2010) Unsteady near-shore natural convection induced by surface cooling. Journal of Fluid Mechanics, 642. pp. 213-233.

Jacob, Mohan V., Sudheendran, K., and Raju, K.C. James (2010) Bi2 (Zn 2/3-x/3Nb4/3-2x/3Ti x)O7 ceramics - a low temperature sintered material for LTCC applications. Journal of the Australian Ceramic Society, 46 (2). pp. 54-58.

Kannan, M. Bobby, He, Yinghe, and Sandham, Andrew (2010) Calcium phosphate deposition on magnesium alloy for bioimplant applications. Materials Science Forum, 654-656. pp. 2196-2199.

Srinarayana, N., Armfield, S.W., Behnia, M., and Lin, Wenxian (2010) Critical Froude number for transition from a steady to an unsteady fountain injected into a homogeneous fluid. In: Proceedings of the 17th Australasian Fluid Mechanics Conference, pp. 1-3. From: 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand.

Galbraith, Shaun C., and Schneider, Philip A. (2010) Dynamic simulation of a struvite MSMPR crystalliser with crystal nucleation, growth and aggregation. In: Proceedings of Chemeca 2010, pp. 1-11. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

Mulligan, Renae, Yin, Ling, Lamont, Anthony, Peng, Zhongxiao, Forwood, Mark R., and Teoh, Swee Hin (2010) Effect of penetration rate on insertion force in trabecular bone biopsy. Materials Science Forum, 654-656. pp. 2225-2228.

Williamson, N., Armfield, S.W., and Lin, Wenxian (2010) Entrainment in turbulent fountain flow. In: Proceedings of the 17th Australasian Fluid Mechanics Conference, pp. 1-4. From: 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand.

Song, Xiao-Fei, and Yin, Ling (2010) FEA-predicted subsurface damage in micro finishing of a feldspar porcelain using fine-grit dental burs. Key Engineering Materials, 443. pp. 562-566.

Bazaka, Kateryna, Jacob, Mohan V., and Shanks, Robert A. (2010) Fabrication and characterization of RF plasma polymerized thin films from 3,7-dimethyl-1,6-octadien-3-ol for electronic and biomaterial applications. Advanced Materials Research, 123-125. pp. 323-326.

Henderson, David J., and Ginger, John D. (2010) Fluctuating wind loads for cladding design. In: Proceedings of The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010, pp. 150-155. From: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference, 8-12 August 2010, Sydney, NSW, Australia.

Jacob, M.V., Thomas, S., Sebastian, M.T., Honkama, J., and Jantunen, H. (2010) Frequency and temperature dependent dielectric properties of greentapes. Journal of the Australian Ceramic Society, 46 (1). pp. 36-40.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqin, and Peng, Zhongxiao (2010) Gear faults diagnosis based on wavelet-AR model and PCA. In: Proceedings of SPIE (7820), 78203V-1. From: International Conference on Image Processing and Pattern Recognition in Industrial Engineering, 7 - 8 August 2010, Xi'an, China.

Ajayi, O.O., and Sheehan, M.E. (2010) Image analysis of holdup patterns in flighted rotary dryer. In: Proceedings of Chemeca 2010, pp. 1-10. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

Mazierska, Janina, and Gileppa, Jesse (2010) Investigation into improving coverage and capacity of CDMA wireless base stations with CRFE in rural environment. In: Proceedings of 2010 Asia-Pacific Microwave Conference, pp. 211-214. From: APMC 2010 Asia-Pacific Microwave Conference, 7-10 December 2010, Yokohama, Japan.

Lu, Jun, and Zahedi, Ahmad (2010) Maximum efficiency point tracking control for fuel cell power systems. In: Proceedings of POWERCON 2010 International Conference on Power System Technology , pp. 1-6. From: POWERCON 2010 International Conference on Power System Technology, 24-28 October 2010, Hangzhou, China.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2010) Measurement of bubble size distribution in copper electrowinning process by image analysis. In: Proceedings of Copper 2010: Electrowinning and -refining (4), pp. 1237-1252. From: Copper 2010, 6 - 10 June 2010, Hamburg, Germany.

Kikkert, C.J. (2010) Modeling power transformers for the design of SWER line coupling networks. In: Proceedings of First IEEE International Conference on Smart Grid Communications, pp. 120-125. From: First IEEE SmartGrid Communications Conference, 4-6 October 2010, Gaithersburg, MD, USA.

Kikkert, Cornelis Jan (2010) Modelling power transformers at power line carrier frequencies. In: Proceedings of 2010 Electricity Engineers' Association Conference, pp. 1-6. From: 2010 EEA Electricity Engineers' Association Conference, 17 - 18 June 2010, Christchurch, New Zealand.

Gummow, Rosalind J., and He, Yinghe (2010) Morphology and preferred orientation of pulse electrodeposited magnesium. Journal of the Electrochemical Society, 157 (4). pp. 45-49.

Sreekanth, Janardhanan, and Datta, Bithin (2010) Multi-objective management models for optimal and sustainable use of coastal aquifers. In: Papers from Groundwater 2010, pp. 1-5. From: Groundwater 2010, 31 October - 4 November 2010, Canberra, ACT, Australia.

Allen, Christopher, Peng, Zhongxiao, Yin, Ling, and Carmichael, Emma (2010) Nano-hardness testing of wear particles in sheep knee joints. Materials Science Forum, 654-656 . pp. 2253-2256.

Al-Adili, A., Sivakugan, N., and Ren, G. (2010) Numerical modelling to reduce Baghdad soil subsidence and settlement on locations of sewage systems. Australian Journal of Civil Engineering, 6 (1). pp. 57-70.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Wang, Feng, Pushpamali, Wickrama Arachchilage Anoja, Wang, James Y., Ellis, Amanda V., Berndt, Christopher C., Crawford, Russell J., and Ivanova, Elena P. (2010) Plasma-enhanced synthesis of bioactive polymeric coatings from monoterpene alcohols: a combined experimental and theoretical study. Biomacromolecules, 11 (8). pp. 2016-2026.

Kikkert, Cornelis Jan (2010) Radiation from powerlines due to PLC for smart grid applications. In: Proceedings of 2010 Electricity Engineers' Association (EEA) Conference, pp. 1-10. From: 2010 Electricity Engineers' Association (EEA) Conference, 17 - 18 June 2010, Christchurch, New Zealand.

Bazaka, Kateryna, Jacob, Mohan V., Ivanova, Elena P., and Truong, Vi Khanh (2010) Radio frequency plasma enhanced synthesis of antifouling polymeric coatings from monoterpene alcohols. In: Proceedings of TENCON 2010, pp. 1486-1491. From: TENCON 2010, 21-24 November 2010, Fukuoka, Japan.

Patra, C.R., Sivakugan, N., and Das, B.M. (2010) Relative density and median grain-size correlation from laboratory compaction tests on granular soil. International Journal of Geotechnical Engineering, 4 (1). pp. 55-62.

Lu, Tao, Yao, Xiangdong, Lu, Max Gao Qing, and He, Yinghe (2010) Roles of trifluoroacetic acid, acetic acid and their salts in the synthesis of helical mesoporous materials. Journal of Porous Materials, 17 (1). pp. 123-131.

Lovisa, Julie, Shukla, Sanjay, and Sivakugan, Siva (2010) Shear strength of randomly distributed moist fibre-reinforced sand. Geosynthetic International, 17 (2). pp. 100-106.

Lymer, Richard, Yin, Ling, Peng, Zhongxiao, Jones, Robert H.B., and Sandham, Andrew (2010) Surface roughness and stress responses of a feldspar porcelain to fatigue impact. Key Engineering Materials, 443. pp. 557-561.

Zahedi, Ahmad (2010) Sustainable electric energy supply by decentralized alternative energy technologies. In: Proceedings of the 4th International Conference on Sustainability Engineering and Science, pp. 1-10. From: 4th International Conference on Sustainability Engineering and Science, 30 November - 3 December 2010, Auckland, New Zealand.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2010) Uncertainty based optimal monitoring network design for a chlorinated hydrocarbon contaminated site. Environmental Monitoring and Assessment, 173 (1-4). pp. 929-940.

Song, X-F., and Yin, L. (2010) The quantitative effect of diamond grit size on the subsurface damage induced in dental adjustment of porcelain surfaces. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 224 (10). pp. 1185-1194.

Zahedi, A. (2010) A review on feed-in tariff in Australia, what it is now and what it should be. Renewable & Sustainable Energy Reviews, 14 (9). pp. 3252-3255.

Bazaka, Kateryna, Jacob, Mohan V., and Ivanova, Elena P. (2010) A study of a retention of antimicrobial activity by plasma polymerized terpinen-4-ol thin films. Materials Science Forum, 654-656. pp. 2261-2264.

Dhar, Anirban, and Datta, Bithin (2009) Saltwater intrusion management of coastal aquifers I: linked simulation-optimization. Journal of Hydrologic Engineering, 14 (12). pp. 1263-1272.

Jegatheesan, V., Shu, L., Liow, J.L., and Sivakugan, N. (2009) Diverse challenges faced in developing sustainable catchments. Water, Air, & Soil Pollution: focus, 9 (5-6). pp. 321-322.

Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of microstructure on micromechanical performance of dry cortical bone tissues. Materials Characterization, 60 (12). pp. 1424-1431.

Ievers, Simon, and Lin, Wenxian (2009) Numerical simulation of three-dimensional flow dynamics in a hot water storage tank. Applied Energy, 86 (12). pp. 2604-2614.

Khan, S. Jamal, Visvanathan, C., and Jegatheesan, V. (2009) Prediction of membrane fouling in MBR systems using empirically estimated specific cake resistance. Bioresource Technology, 100 (23). pp. 6133-6136.

Dhar, Anirban , and Datta, Bithin (2009) Saltwater intrusion management of coastal aquifers. II: operation uncertainty and monitoring. Journal of Hydrologic Engineering, 14 (12). pp. 1273-1282.

Bednarz, Tomasz P., Lin, Wenxian, Patterson, John C., Lei, Chengwang, and Armfield, Steven W. (2009) Scaling for unsteady thermo-magnetic convection boundary layer of paramagnetic fluids of Pr > 1 in micro-gravity conditions. International Journal of Heat and Fluid Flow, 30 (6). pp. 1157-1170.

Salehi, M., and Sivakugan, N. (2009) Effects of lime-clay modification on the consolidation behaviour of the dredged mud. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 135 (6). pp. 251-258.

Wang, Yuanfang, Shu, Li, Jegatheesan, Veeriah, and Gao, Baoyu (2009) Coagulation and nano-filtration: a hybrid system for the removal of lower molecular weight organic compounds (LMWOC). Desalination and Water Treatment, 11 (1). pp. 23-31.

Neilly, A., Jegatheesan, V., and Shu, L. (2009) Evaluating the potential for zero discharge from reverse osmosis desalination using integrated processes – a review. Desalination and Water Treatment, 11. pp. 58-65.

Dhar, Anirban, and Datta, Bithin (2009) Global optimal design of ground water monitoring network using embedded kriging. Ground Water, 47 (6). pp. 806-815.

Datta, Bithin, Vennalakanti, Harikrishna, and Dhar, Anirban (2009) Modeling and control of saltwater intrusion in a coastal aquifer of Andhra Pradesh, India. Journal of Hydro-Environment Research, 3 (3). pp. 148-159.

Li, Li, Peng, Zhongxiao, and Peng, Shuzhi (2009) Detrended fluctuation analysis for gear fault diagnosis. China Mechanical Engineering, 20 (19). pp. 2311-2314.

Teo, J., Liew, W.K., and Leong, Y.K. (2009) Clay, phosphate adsorption, dispersion, and rheology. Water, Air, & Soil Pollution: focus, 9 (5-6). pp. 403-407.

Bednarz, Tomasz, Patterson, John C., Lei, Chengwang, and Ozoe, Hiroyuki (2009) Enhancing natural convection in a cube using a strong magnetic field — Experimental heat transfer rate measurements and flow visualization. International Communications in Heat and Mass Transfer, 36 (8). pp. 781-786.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Heat transfer through coupled thermal boundary layers induced by a suddenly generated temperature difference. International Journal of Heat and Mass Transfer, 52 (21-22). pp. 4966-4975.

Patterson, John C., Lei, Chengwang, Armfield, Steve W., and Lin, Wenxian (2009) Scaling of unsteady natural convection boundary layers with a non-instantaneous initiation. International Journal of Thermal Sciences, 48 (10). pp. 1843-1852.

Al-Adili, A., Chandra, S., and Sivakugan, N. (2009) Slippage effect on the settlement response of a granular soft soil system. In: Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, pp. 853-856. From: 17th International Conference on Soil Mechanics and Geotechnical Engineering, 5-9 October 2009, Alexandria, Egypt.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2009) Unsteady natural convection induced by diurnal temperature changes in a reservoir with slowly varying bottom topography. International Journal of Thermal Sciences, 48 (10). pp. 1932-1942.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2009) Simultaneous identification of unknown groundwater pollution sources and estimation of aquifer parameters. Journal of Hydrology, 376 (1-2). pp. 48-57.

Peng, Zhongxiao, Fasiolo, Mark, and Hart, Kane (2009) Investigation into changes in collagen structure of articular cartilage and wear particles of knee joints for osteoarthritic wear assessment. Journal of Musculoskeletal Research, 12 (3). pp. 143-152.

Zahedi, A. (2009) Opportunities for rooftop photovoltaic system in Queensland. In: Proceedings of Solar09, the 47th annual conference of ANZSES2009, pp. 1-11. From: Solar09, the 47th annual conference of ANZSES2009, 29th September - 2nd October, 2009, Townsville, QLD, Australia.

Easton, Christopher D., Jacob, Mohan V., Shanks, Robert A., and Bowden, Bruce F. (2009) Surface and chemical characterization of PolyLA thin films fabricated using plasma polymerization. Chemical Vapor Deposition, 15 (7). pp. 179-185.

Fabian, C.P., Ridd, M.J., Sheehan, M.E., and Mandin, Ph. (2009) Modeling the charge-transfer resistance to determine the role of guar and activated polyacrylamide in copper electrodeposition. Journal of the Electrochemical Society, 156 (10). pp. 400-407.

Lu, Tao, Yao, Xiangdong, Lu, Gao Qing, and He, Yinghe (2009) Controlled evolution from multilamellar vesicles to hexagonal mesostructures through the addition of 1,3,5-trimethylbenzene. Journal of Colloid and Interface Science, 336 (1). pp. 368-373.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of cryo-induced microcracks on microindentation of hydrated cortical bone tissue. Materials Characterization, 60 (8). pp. 283-291.

Shukla, S.K., Khandelwal, S., Verma, V.N., and Sivakugan, N. (2009) Effect of surcharge on on the stability of anchored rock slope with water filled tension crack under seismic loading condition. Geotechnical and Geological Engineering, 27 (4). pp. 529-538.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2009) Optimal dynamic monitoring network design and identification of unknown groundwater pollution sources. Water Resources Management, 23 (10). pp. 2031-2049.

Bazaka, K., and Jacob, M.V. (2009) Synthesis of radio frequency plasma polymerized non-synthetic Terpinen-4-ol thin films. Materials Letters, 63 (18-19). pp. 1594-1597.

Easton, Christopher D., Jacob, Mohan V., and Shanks, Robert A. (2009) Fabrication and characterisation of polymer thin-films derived from cineole using radio frequency plasma polymerisation. Polymer, 50 (15). pp. 3465-3469.

Promraksa, Arwut, Flood, Adrian E., and Schneider, Phil (2009) Measurement and analysis of the dextran partition coefficient in sucrose crystallization. Journal of Crystal Growth, 311 (14). pp. 3667-3673.

Shukla, Sanjay K., Sivakugan, Nagaratnam, Das, Braja M., and Singh, Ashish K. (2009) Fundamental concepts of soil reinforcement - an overview. International Journal of Geotechnical Engineering, 3 (3). pp. 329-342.

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Bednarz, Tomasz Piotr, Lei, Chengwang, and Patterson, John C. (2009) An experimental study of unsteady natural convection in a reservoir model subject to periodic thermal forcing using combined PIV and PIT. Experiments in Fluids, 47 (1). pp. 107-117.

Shukla, Sanjay Kumar, Gaurav, , and Sivakugan, Nagaratnam (2009) A simplified extension of the conventional theory of arching in soils. International Journal of Geotechnical Engineering, 3 (3). pp. 353-359.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2009) Shape of a particle curtain falling in stagnant air. Powder Technology, 192 (3). pp. 384-388.

Shukla, Sanjay K., Loughran, Jeffrey G., and Sivakugan, Nagaratnam (2009) Stress within a cohesionless granular fill in a storage vessel with sloping walls during initial static loading. Powder Technology, 192 (3). pp. 389-393.

Lin, Wenxian, Armfield, S.W., Patterson, J.C., and Lei, Chengwang (2009) Prandtl number scaling of unsteady natural convection boundary layers for Pr>1 fluids under isothermal heating. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 79 (6).

Easton, C.D., and Jacob, M.V. (2009) Optical characterisation of radio frequency plasma polymerised Lavandula angustifolia essential oil thin films. Thin Solid Films, 517 (15). pp. 4402-4407.

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of 11th Americas Conference on Wind Engineering, pp. 1-12. From: 11th Americas Conference on Wind Engineering, 22 - 26 June 2009, San Juan, Puerto Rico.

Sudheendran, Kooriyattil, Kanakkappillavila Chinnayya, James Raju, and Jacob, Mohan Vadakkedam (2009) Microwave dielectric properties of Ti-substituted Bi2 (Zn 2/3Nb4/3)O7 pyrochlores at cryogenic temperatures. Journal of the American Ceramic Society, 92 (6). pp. 1268-1271.

Shukla, Sanjay Kumar, Gupta, Shrawan Kumar, and Sivakugan, Nagaratnam (2009) Active earth pressure on retaining wall for c-phi soil backfill under seismic loading condition. Journal of Geotechnical and Geoenvironmental Engineering, 135 (5). pp. 690-696.

Zahedi, A. (2009) Development of an economical model to determine an appropriate fee-in tariff for grid-connected solar PV electricity for all states of Australia. Renewable and Sustainable Energy Reviews, 13 (4). pp. 871-878.

Jeppesen, T., Shu, L., Keir, G., and Jegatheesan, V. (2009) Metal recovery from reverse osmosis concentrate. Journal of Cleaner Production, 17 (7). pp. 703-707.

Bhattacharjya, Rajib Kumar, Datta, Bithin, and Satish, Mysore G. (2009) Performance of an artificial neural network model for simulating saltwater intrusion process in coastal aquifers when training with noisy data. KSCE Journal of Civil Engineering, 13 (3). pp. 205-215.

Jegatheesan, V., Senaratne, N., Steicke, C., and Kim, Seung-Hyun (2009) Powdered activated carbon for fouling reduction of membrane in a pilot-scale recirculation aquaculture system. Desalination and Water Treatment, 5 (1-3). pp. 1-5.

Walker, Rohan, Indraratna, Buddhima, and Sivakugan, Nagaratnam (2009) Vertical and radial consolidation analysis of multilayered soil using the spectral method. Journal of Geotechnical and Geoenvironmental Engineering, 135 (5). pp. 657-663.

Jegatheesan, V., Liow, J.L., Shu, L., Kim, S.H., and Visvanathan, C. (2009) The need for global coordination in sustainable development. Journal of Cleaner Production, 17 (7). pp. 637-643.

Moreira, Robert L., Lobo, Ricardo P.S.M., Subodh, Ganesanpotti, Sebastian, Mailadil T., Jacob, Mohan V., and Dias, Anderson (2009) Microwave and infrared dielectric properties of Sr1−3x/2CexTiO3(x = 0.154–0.400) incipient ferroelectrics at cryogenic temperatures. Journal of Physics D: applied physics, 42. - .

Easton, C.D., and Jacob, M.V. (2009) Ageing and thermal degradation of plasma polymerised thin films derived from Lavandula angustifolia essential oil. Polymer Degradation and Stability, 94 (4). pp. 597-603.

Kikkert, C.J., and Reid, G.D. (2009) Radiation and attenuation of Single Wire Earth Return power lines at LF frequencies. In: Proceedings of 2009 IEEE International Symposium on Power Line Communications and its Applications, pp. 68-72. From: 2009 IEEE International Symposium on Power Line Communications and its Applications, 29 March - 1 April 2009, Dresden, Germany.

Song , Xiao-Fei, Yin, Ling, and Han, Yi-Gang (2009) In-process assessment of dental cutting of a leucite-reinforced glass–ceramic. Medical Engineering and Physics, 31 (2). pp. 214-220.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2009) Insitu testing of highways and runways. Civil Engineering & Construction Review, 22 (3). pp. 78-86.

Shukla, Sanjay Kumar, Sivakugan, Nagaratnam, and Mahto, Sitaram (2009) A simple method for estimating Poisson's ratio of geosynthetics at zero strain. Geotechnical Testing Journal, 32 (2). pp. 181-185.

Song, Xiao-Fei, and Yin, Ling (2009) Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. Journal of Biomechanics, 42 (3). pp. 355-360.

Jegatheesan, V., Phong, D.D., Shu, L., and Ben Aim, R. (2009) Performance of ceramic micro- and ultrafiltration membranes treating limed and partially clarified sugar cane juice. Journal of Membrane Science, 327 (1-2). 69 -77 .

Pacheco, M., Sivakugan, N., and Barbosa, M.C. (2009) Statistical assessment of unidirectional propagation of a leachate contaminant plume. Geotechnical and Geological Engineering, 27 (1). pp. 123-135.

Bednarz, Tomasz P., Lei, Chengwang, Patterson, John C., and Hiroyuki, Ozoe (2009) Suppressing Rayleigh–Benard convection in a cube using a strong magnetic field — experimental heat transfer rate measurements and flow visualization. International Communications in Heat and Mass Transfer, 36 (2). pp. 97-102.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Transition to a periodic flow induced by a thin fin on the sidewall of a differentially heated cavity. International Journal of Heat and Mass Transfer, 52 (3-4). pp. 620-628.

Bednarz, Tomasz, Lei, Chengwang, and Patterson, John (2009) A numerical study of unsteady natural convection induced by iso-flux surface cooling in a reservoir model. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 56-66.

Scardino, A.J., Hudleston, D., Peng, Z., Paul, N.A., and de Nys, R. (2009) Biomimetic characterisation of key surface parameters for the development of fouling resistant materials. Biofouling, 25 (1). pp. 83-93.

Bednarz, Tomasz P., Lei, Chengwang, Patterson, John C., and Ozoe, Hiroyuki (2009) Effects of a transverse, horizontal magnetic field on natural convection of a paramagnetic fluid in a cube. International Journal of Thermal Sciences, 48 (1). pp. 26-33.

Shukla, S.K., Sivakugan, N., and Das, B.M. (2009) Methods for determination of the coefficient of consolidation and the time-rate settlement - an overview. International Journal of Geotechnical Engineering, 3 (1). pp. 89-108.

Yin, Ling (2009) Abrasive technology in ceramic restorative dentistry. Advanced Materials Research, 76-78 (12). pp. 363-369.

Peng, S.Z., and Sun, H.M. (2009) Accurate and efficient prediction of acoustical performance of noise barriers against transport noise pollution. International Journal of Vehicle Noise and Vibration, 5 (1-2). pp. 53-90.

Peng, Shuzhi, Cheng, Li, Huang, Lixi, Peng, Zhongxiao, and Li, Li (2009) Advanced acoustical wave propagator technique for acoustic-structure interaction in a duct structure with/without membrane. In: Proceedings of the 16th International Congress on Sound and Vibration, pp. 4324-4331. From: 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland.

Jegatheesan, V., Shu, L., and Visvanathan, C. (2009) Application of membrane bioreactors for water reuse. In: Pandey, Ashok , Larroche, Christian, Soccol, Carlos Ricardo, and Dussap, Claude-Gilles, (eds.) New Horizons in Biotechnology. Asiatech, New Delhi, India, pp. 272-285.

Holmes, J.D., and Ginger, J.D. (2009) Codification of internal pressures for building design. In: Proceedings of Seventh Asia-Pacific Conference on Wind Engineering, pp. 1-8. From: Seventh Asia-Pacific Conference on Wind Engineering, 8-12 November 2009, Taipei, Taiwan.

Fisher, Ian, Kastl, George, Sathasivan, Arumugam, and Jegatheesan, Veeriah (2009) Comment on “A Variable Rate Coefficient Chlorine Decay Model”. Environmental Science & Technology, 43 (23). p. 9043.

Vigneswaran, Saravanamuttu, Jegatheesan, Veeriah, and Keir, G. (2009) Deep Bed Filtration: modeling theory and practice. In: Vigneswaran, Saravanamuthu (Vigi) , (ed.) Waste Water Treatment Technologies. Encyclopedia of Life Support Systems (EOLSS) . EOLSS Publishers, Oxford, UK, - .

Wang, Yan, Xu, Xiuming, Jegatheesan, Jega, and Gao, Baoyu (2009) Effect of coagulants categories on the fouling and performance of ultrafiltration (UF) membrane. Desalination and Water Treatment, 11 (1-2). pp. 32-37.

Sim, L., Shu, L., Jegatheesan, V., and Phong , D.D. (2009) Effect of operating parameters and cleaning on the performance of ceramic membranes treating partially clarified sugar cane juice. Separation Science and Technology, 44 (15). pp. 3506-3537.

Virkutyte, Jurate, and Jegatheesan, Veeriah (2009) Electro-Fenton, hydrogenotrophic and Fe2+ ions mediated TOC and nitrate removal from aquaculture system: Different experimental strategies. Bioresource Technology, 100 (7). pp. 2189-2197.

Jegatheesan, Jega, Kim, Seung-Hyun, Joo, C. K., and Gao, Baoyu (2009) Evaluating the effects of granular and membrane filtrations on chlorine demand in drinking water. Journal of Environmental Sciences, 21 (1). pp. 23-29.

Srinarayana, N., Armfield, S.W., and Lin, W.X. (2009) Impinging plane fountains in a homogeneous fluid. International Journal of Heat and Mass Transfer, 52. pp. 2614-2623.

Shukla, S.K., Sivakugan, N., Gandhi, M., and Ahmad, M.K. (2009) Improved expressions for field values of compaction test parameters. Géotechnique, 59 (10). pp. 851-853.

Li, Li, Peng, Zhongxiao, and Zhao, Meiyun (2009) In-situ monitoring of active crack in steel structure using acoustic emission technique. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation (1), pp. 229-232. From: 2009 International Conference on Measuring Technology and Mechatronics Automation, 11-12 April 2009, Hunan, China.

Kikkert, Cornelis J., and Reid, Geoffrey D. (2009) Is Broadband over Power-lines dead? In: Proceedings from the Australasian Telecommunications Networks and Applications Conference 2009, pp. 1-6. From: Australasian Telecommunications Networks and Applications Conference ATNAC 2009, 10 -12 November 2009, Canberra, ACT, Australia.

Srinarayana, N., Armfield, S.W., and Lin, Wenxian (2009) Laminar plane fountains impinging on a ceiling with an opposing heat flux. International Journal of Heat and Mass Transfer, 52. pp. 4545-4552.

Jacob, Mohan (2009) Low loss dielectric materials for high frequency applications. International Journal of Modern Physics B, 23 (17). pp. 3649-3654.

Kannan, M. Bobby, and R.K. Singh, Raman (2009) Magnesium alloys as biodegradable implants. Materials Science Forum, 618-619. pp. 83-86.

Choopani, Saeed, Kayhan, Neda, Sharbati, Ali, and Jacob, Mohan V. (2009) Microwave characteristics of Nanocrytalline NBT Powder in polymeric matrix. In: Proceedings of 12th International Symposium on Microwave and Optical Technology, pp. 1393-1396. From: 12th International Symposium on Microwave and Optical Technology, 16 - 19 December 2009, New Delhi, India.

Mazierska, Janina (2009) Microwave characterization of materials for telecommunication systems. In: Proceedings of the 2009 IEEE Youth Conference on Information, Computing and Telecommunications, p. 1. From: YC-ICT 2009: 2009 IEEE Youth Conference on Information, Computing and Telecommunications, 20-21 September 2009, Bejing, China.

Reid, Geoffrey D., and Kikkert, Cornelis J. (2009) Modelling power transformers to determine the effect of PVC Inverter Spurii on the distribution network. In: Proceedings of Solar09, the 47th Annual Conference of ANZSES2009, pp. 1-5. From: Solar09, the 47th Annual Conference of ANZSES2009, 29th September - 2nd October, 2009, Townsville, QLD, Australia.

Jacob, Mohan V. (2009) Non-destructive dielectric characterization techniques using electromagnetic waves. In: Proceedings of 12th International Symposium on Microwave and Optical Technology, 339- 342. From: 12th International Symposium on Microwave and Optical Technology, 16 - 19 December 2009, New Delhi, India.

Feng, Y.T., Han, K., Owen, D.R.J., and Loughran, J. (2009) On upscaling of discrete element models: similarity principles. Engineering Computations: international journal for computer-aided engineering and software, 26 (6). pp. 599-609.

Zahedi, Ahmad (2009) Opportunities and challenges for renewable energy in Australia. University Journal of Engineering and Technology, 1. pp. 14-20.

Fathi, S.H., Hosseini Aghdam, M.G., Zahedi, A., and Gharehpetian, G.B. (2009) Optimum regulation of DC sources in cascaded multi-level inverters. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 28 (2). pp. 385-395.

Steicke, C., Jegatheesan, V., and Zeng, C. (2009) Performance of a recirculating tank-based system utilizing floating and submerged filters with a denitrification column for the culture of barramundi (Lates calcarifer). In: Proceedings of the Fourth International Symposium on Southeast Asian Water Environment (4), pp. 253-260. From: Fourth International Symposium on Southeast Asian Water Environment, 6-8 December 2006, Bangkok, Thailand.

Kikkert, Cornelis Jan, and Reid, Geoffrey (2009) Radiation and attenuation of communication signals on power lines. In: Proceedings of the Seventh International Conference on Information, Communication and Signal Processing, pp. 1-5. From: Seventh International Conference on Information, Communication and Signal Processing ICICS 2009, 8-10 December 2009, Macau, China.

Steicke, C.R., Jegatheesan, V., and Zeng, C. (2009) Recirculating aquaculture systems - a review. In: Vigneswaran, S., (ed.) Water and Wastewater Treatment Technologies. Encyclopedia of Life Support Systems , 1-2 . EOLSS, Oxford, UK, pp. 1-25.

Frye, Ulrich, Ginger, John, and Mullins, Peter (2009) Response of cladding to windborne debris impact. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8 -12 November 2009, Taipei, Taiwan.

Bednarz, Tomasz, Kaneda, Masayuki, Lin, Wenxian, and Dranga, Octavian (2009) Scaling of unsteady magnetic convection boundary layer growth for Pr>1 fluids. In: Proceedings of 46th National Heat Transfer Symposium, pp. 689-690. From: 46th National Heat Transfer Symposium, 2 - 4 June 2009, Kyoto, Japan.

Zahedi, Ahmad (2009) Sustainable power supply using renewable energy and storage technologies. In: Proceedings of Central Region Engineering Conference CREC 2009. From: Central Region Engineering Conference CREC 2009, 14-15 August 2009, Rockhampton, QLD, Australia.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Transient natural convection flows around a thin fin on the sidewall of a differentially heated cavity. Journal of Fluid Mechanics, 639. pp. 261-290.

Jacob, Mohan V. (2009) Understanding the fundamental material constants in microwave measurements. Ferroelectrics, 387 (1). pp. 91-101.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2009) Unsteady natural convection in a triangular enclosure induced by absorption of radiation – a revisit by improved scaling analysis. Journal of Fluid Mechanics, 662. pp. 75-102.

Kim, Peter, and Ginger, John (2009) Variation of internal pressure with size of dominant opening and volume. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8-12 November 2009, Taipei, Taiwan.

Schneider, P.A., and Ali, Md I. (2009) The application of process systems engineering to the development of struvite recovery systems. In: Proceedings of the 2009 International Conference on Nutrient Recovery from Wastewater Streams. From: 2009 International Conference on Nutrient Recovery from Wastewater Streams, 10 - 13 May, 2009, Vancouver, BC, Canada.

Shukla, S.K., and Sivakugan, N. (2009) A general expression for geosynthetic strain due to deflection. Geosynthetic International, 16 (5). pp. 402-407.

Galbraith, S.C., and Schneider, P.A. (2009) A review of struvite nucleation studies. In: Proceedings of the 2009 International Conference on Nutrient Recovery from Wastewater Streams. From: 2009 International Conference on Nutrient Recovery from Wastewater Streams, 10 - 13 May, 2009, Vancouver, BC, Canada.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2008) Behaviour of a curtain of particles falling through a horizontally-flowing gas stream. Powder Technology, 188 (2). pp. 110-118.

Knack, A., Mazierska, J., and Piel, H. (2008) Dielectric resonator filters for UMTS systems. In: Proceedings of the 2008 IEEE MTT-S International Microwave Workshop Series on Art of Miniaturizing RF and Microwave Passive Components , pp. 30-33. From: 2008 IEEE MTT-S International Microwave Workshop Series on Art of Miniaturizing RF and Microwave Passive Components , 14-15 December 2008, Chengdu, China.

Mathan, M. Bobby, Singh Raman, R.K., and Khoddam, S. (2008) Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and an interstitial-free steel. Corrosion Science, 50 (10). pp. 2879-2884.

Rankine, B.R., Indraratna, B., Sivakugan, N., Wijeyakulasuriya, V., and Rujikiatkaumjorn, C. (2008) Foundation behaviour below an embankment on soft soils. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 161 (5). pp. 259-267.

Vigh, S.N., Sheehan, M.E., and Schneider, P.A. (2008) Isothermal drying of non-nucleated sugar syrup films. Journal of Food Engineering, 88 (4). pp. 450-455.

Jafari, Seid Mahdi, Assadpoor, Elham, He, Yinghe, and Bhandari, Bhesh (2008) Re-coalescence of emulsion droplets during high-energy emulsification. Food Hydrocolloids, 22 (7). pp. 1191-1202.

Ginger, John D., Holmes, John D., and Kopp, Gregory A. (2008) Effect of building volume and opening size on fluctuating internal pressure. Wind & Structures, 11 (5). pp. 361-376.

Williamson, N., Armfield, S.W., and Lin, W. (2008) Direct numerical simulation of turbulent intermediate Froude number fountain flow. ANZIAM Journal, 50. pp. 16-30.

Williamson, N., Srinarayana, N., Armfield, S.W., McBain, G.D., and Lin, W. (2008) Low-Reynolds-number fountain behaviour. Journal of Fluid Mechanics, 608. pp. 297-317.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2008) An experimental study of the unsteady thermal flow around a thin fin on a sidewall of a differentially heated cavity. International Journal of Heat and Fluid Flow, 29 (4). pp. 1139-1153.

Xu, Feng, Patterson, John, and Lei, Chengwang (2008) On the double-layer structure of the boundary layer adjacent to a sidewall of a differentially heated cavity. International Journal of Heat and Mass Transfer, 51 (15-16). pp. 3803-3815.

Yuan, C. Q., Peng, Z., Yan, X.P., and Zhou, X. C. (2008) Surface roughness evolutions in sliding wear process. Wear, 265 (3-4). pp. 341-348.

Ali, Md. Imtiaj, and Schneider, Philip Andrew (2008) An approach of estimating struvite growth kinetic incorporating thermodynamic and solution chemistry, kinetic and process description. Chemical Engineering Science, 63 (13). pp. 3514-3525.

Mathan, M. Bobby, Gomes, D., Dietzel, W., and Abetz, V. (2008) Polyoxadiazole-based coating for corrosion protection of magnesium alloy. Surface & Coatings Technology, 202 (19). pp. 4598-4601.

Visvanathan, C., Phong, D.D., and Jegatheesan, V. (2008) Hydrogenotrophic denitrification of highly saline aquaculture wastewater using hollow fiber membrane bioreactor. Environmental Technology, 29 (6). pp. 701-707.

Visvanathan, C., Hung, N.Q., and Jegatheesan, V. (2008) Hydrogenotrophic denitrification of synthetic aquaculture wastewater using membrane bioreactor. Process Biochemistry, 43 (6). pp. 673-682.

Bednarz, Tomasz, Fornalik, Elzbieta, Ozoe, Hiroyuki, Szmyd, Janusz S., Patterson, John C., and Lei, Chengwang (2008) Influence of a horizontal magnetic field on the natural convection of paramagnetic fluid in a cube heated and cooled from two vertical side walls. International Journal of Thermal Sciences, 47 (6). pp. 668-679.

Subodh, G., Ratheesh, R., Jacob, M.V., and Sebastian, M.T. (2008) Microwave dielectric properties and vibrational spectroscopic analysis of MgTe2O5 ceramics. Journal of Materials Research, 23 (6). pp. 1551-1556.

He, Yinghe (2008) Application of flow-focusing to the break-up of an emulsion jet for the production of matrix-structured microparticles. Chemical Engineering Science, 63 (9). pp. 2500-2507.

Jamal Khan, S., Visvanathan, C., Jegatheesan, V., and BenAim, R. (2008) Influence of mechanical mixing rates on sludge characteristics and membrane fouling in MBRs. Separation Science and Technology, 43 (7). pp. 1826-1838.

Sheehan, M.E., Ajayi, O., and Lee, A. (2008) Modelling solids transport in an industrial flighted rotary dryer. In: Proceedings of the 18th European Symposium on Computer Aided Process Engineering 2008 (25). From: 18th European Symposium on Computer Aided Process Engineering 2008 , 1-4 June 2008, Lyon, France.

Henderson, David, and Ginger, John (2008) Role of building codes and construction standards in windstorm disaster mitigation. Australian Journal of Emergency Management, 23 (2). pp. 40-46.

Zahedi, A. (2008) Solar Energy Based Distributed Generation Technologies. In: Proceedings of the International Conference of the IET Brunei Darussalam Network, pp. 1-4. From: Sustainable energy management in the era of information & communication technology, 26 May 2008, Brunei Darussalam.

Jacob, M.V., Easton, C.D., Woods, G.S., and Berndt, C.C. (2008) Fabrication of a novel organic polymer thin film. Thin Solid Films, 516 (12). pp. 3884-3887.

Holmes, D.W., and Loughran, J.G. (2008) Theoretical aspects of the testing of elasto-viscoelastic–viscoplastic materials. Polymer Testing, 27 (2). pp. 189-203.

Singh, Shailesh, Sivakugan, Nagaratnam, and Chandra, Sarvesh (2008) The permeability of hydraulic fills under surcharge. International Journal of Geotechnical Engineering, 2 (2). pp. 77-87.

Ebersbach, Stephan, and Peng, Zhongxiao (2008) Expert system development for vibration analysis in machine condition monitoring. Expert Systems with Applications, 34 (1). pp. 291-299.

Jegatheesan, V., Steicke, C., Pulefou, T., Zeng, C., and Shu, L. (2008) Recirculating aquaculture systems (RAS): performance of granular media filtration and membrane bioreactors. Journal of Science, Technology and Management, 1 (1). pp. 31-45.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) An experimental study of unsteady natural convection in a reservoir model cooled from the water surface. Experimental Thermal and Fluid Science, 32 (3). pp. 844-856.

Jegatheesan, Veeriah, Shu, Li, Visvanathan, Chettiyappan, and Thanh, Bui Xuan (2008) Aerobic environmental processes. In: Pandey, Ashok, Larroche, Christian, Soccol, Carlos Ricardo, and Dussap, Claude-Giles, (eds.) Advances in Fermentation Technology. Asiatech Publishers, New Delhi, India, pp. 607-639.

Jacob, Mohan V., Sudheendran, K., Raju, K.C. James, and Mazierska, Janina (2008) Bi2(Zn2/3-x/3Nb4/3-2x/3Tix)O7 ceramics - a high permittivity microwave dielectrics for electronics application. In: Proceedings of the Asia Pacific Microwave Conference 2008. From: Asia Pacific Microwave Conference 2008, 16 - 20 December 2008, Hong Kong.

Wadhwa, Lal C. (2008) Developing programs for sustainable transportation through community-based social marketing. In: Proceedings of the International Conference on Transportation Planning and Implementation Methodologies for Technology. From: TPMDC 2014: International Conference on Transportation Planning and Implementation Methodologies for Technology , 3-6 December 2008, Mumbai, India.

Kikkert, Cornelis J., and Kenny, Owen P. (2008) Digital signal processing for a Ka Band satellite beacon receiver/ radiometer. In: Proceedings of the 2008 Australasian Telecommunications Networks and Applications Conference, pp. 128-133. From: 2008 Australasian Telecommunications Networks and Applications Conference, 7-10 December 2008, Adelaide, SA, Australia.

Zahedi, Ahmad (2008) Economical analysis of grid-connected solar photovoltaic systems. In: Papers from the 3rd International Solar Energy Society Conference – Asia Pacific Region, pp. 1-5. From: 3rd International Solar Energy Society Conference – Asia Pacific Region (ISES-AP-08), 25-28 November, 2008, Sydney, NSW, Australia.

Jafari, Seid Mahdi, Assadpoor, Elham, He, Yinghe, and Bhandari, Bhesh (2008) Encapsulation efficiency of food flavours and oils during spray drying. Drying Technology, 26 (7). pp. 816-835.

Sivakugan, Nagaratnam (2008) Geotechnical issues of mining with hydraulic backfills. Electronic Journal of Geotechnical Engineering.

Srinarayana, N., McBain, G.D., Armfield, S.W., and Lin, W.X. (2008) Height and stability of laminar plane fountains in a homogeneous fluid. International Journal of Heat and Mass Transfer, 51. pp. 4717-4727.

Jacob, M.V., Thomas, S., Sebastien, M., Mazierska, J., Honkama, J., and Jantunen, H. (2008) Low temperature microwave characterisation of GreenTapes using split post dielectric resonator. In: Proceedings of the Asia Pacific Microwave Conference 2008. From: Asia Pacific Microwave Conference 2008, 16 - 20 December 2008, Hong Kong.

Zahedi, Ahmad (2008) Low-emission and sustainable power supply for remote communities. In: Proceedings of the Inaugural Symposium on Electrical Energy Evolution in China and Australia, pp. 1-6. From: Electrical Energy Evolution in China and Australia, 28-30 July 2008, Palm Cove, QLD, Australia.

Krupka, Jerzy, Jacob, Mohan, Givot, Bradley L., and Derzakowski, Krzysztof (2008) Measurements of thin resistive films employing split post dielectric resonator technique. In: Proceedings of MIKON 17th International Conference on Microwaves, Radar & Wireless Communications, pp. 892-895. From: MIKON 17th International Conference on Microwaves, Radar & Wireless Communications, 19-23 May 2008, Wroclaw, Poland.

Leong, Y.K. , Sganzerla, M., Berndt, C.C. , and Campbell, G.R. (2008) Metal ions solubility in plant phosphoric acid: degree of ammonia neutralization and temperature effects. Industrial & Engineering Chemistry Research, 47 (5). pp. 1380-1385.

Zahedi, Ahmad (2008) Modeling, simulation and optimization of renewable energy-based power system to supply reliable electricity for remote applications. In: Proceedings of 2008 Australasian Universities Power Engineering Conference. From: 2008 Australasian Universities Power Engineering Conference, 14-17 December 2008, Sydney, NSW, Australia.

Jafari, Seid Mahdi, Assadpoor, Elham, Bhandari, Bhesh, and He, Yinghe (2008) Nano-particle encapsulation of fish oil by spray drying. Food Research International, 41 (2). pp. 172-183.

Henderson, D., Ginger, J., and Morrison, M. (2008) New Australian cyclonic wind induced fatigue loading criteria for roofing. In: Proceedings of the Australasian Structural Engineering Conference 2008, pp. 427-436. From: Australasian Structural Engineering Conference 2008, 26-27 June 2008, Melbourne, VIC, Australia.

Al-Adili, Aqeel Sh., and Sivakugan, N. (2008) Numerical model to predict the settlement response of two nearby foundations due to geotextile slippage. International Journal of Geotechnical Engineering, 2 (4). pp. 441-453.

Lin, Wenxian, and Armfield, S.W. (2008) Onset of entrainment in transitional round fountains. International Journal of Heat and Mass Transfer, 51. pp. 5226-5237.

Reid, Geoffrey D., and Kikkert, Cornelis J. (2008) Radiation from a single wire earth return power line. In: Proceedings of the Inaugural Symposium on Electrical Energy Evolution in China and Australia, pp. 1-4. From: Inaugural Symposium on Electrical Energy Evolution in China and Australia, 28-30 July 2008, Palm Cove, QLD, Australia.

Kikkert, Cornelis J., and Reid, Geoffrey D. (2008) Radiation losses from a single wire earth return power line with bends. In: Proceedings of the 2008 Australasian Telecommunications Networks and Applications Conference, pp. 158-162. From: 2008 Australasian Telecommunications Networks and Applications Conference, 7-10 December 2008, Adelaide, SA, Australia.

Jegatheesan, V., Weragoda, S., and Visvanathan, C. (2008) Rapid water quality characterization for chlorine demand and THM formation in drinking waters. Journal of Water Supply Research and Technology - AQUA, 57 (4). pp. 259-272.

Zahedi, A. (2008) Renewable energy-based power system to supply reliable electricity for remote applications. In: Power Engineering Conference, 2008. AUPEC '08. Australasian Universities, pp. 1-4. From: 2008 Australasian Universities Power Engineering Conference, 14 - 17 December 2008, Sydney, NSW.

Singh, Shailesh, and Sivakugan, Nagaratnam (2008) Time dependent settlements in hydraulic fills. International Journal of Geotechnical Engineering, 2 (4). pp. 293-302.

Lin, Wenxian, Armfield, S.W., and Patterson, J.C. (2008) Unsteady natural convection boundary-layer flow of a linearly-stratified fluid with Pr < 1 on an evenly heated semi-infinite vertical plate. International Journal of Heat and Mass Transfer, 51. pp. 327-343.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2008) Unsteady natural convection in a differentially heated partitioned cavity. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics, pp. 11694-11695. From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) Unsteady natural convection in a reservoir model subject to periodic heating and cooling at the water surface. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics, - . From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) Unsteady natural convection induced by constant surface cooling in a reservoir. ANZIAM Journal, 48. pp. 852-867.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) The design of Ka band satellite beacon receiver. In: Proceedings of the Workshop on Applications of Radio Science 2008 Conference, - . From: Workshop on Applications of Radio Science 2008 Conference, 10-12 Feb 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) A design technique for microstrip filters. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems, pp. 1-5. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Peng, Zhongxiao, and Tomovich, Steven (2008) The development of a new image acquisition and analysis system for 3D surface measurements using confocal laser scanning microscopy. Advanced Materials Research, 32. pp. 173-179.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) A digital signal processing based Ka Band Satellite Beacon Receiver. In: Proceedings of 15th IEEE International Conference on Electronics, Circuits and Systems, pp. 1-4. From: 15th International Conference on Electronics, Circuits and Systems, 31 August - 3 September 2008, Malta.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) A digital signal processing based Ka Band Satellite Beacon Receiver/ Radiometer. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems, pp. 1-8. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) The effect of amplifier distortion and filter type on BER of WCDMA-UMTS mobile radio systems. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems, pp. 1-7. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) The effect of filter type on BER of WCDMA-UMTS mobile radio systems. In: Proceedings of 15th IEEE International Conference on Electronics, Circuits and Systems, pp. 966-969. From: 15th International Conference on Electronics, Circuits and Systems, 31 August - 3 September 2008, Malta.

Younis, Obai, Xu, Feng, Patterson, John C., Lei, Chengwang, Pallares, Jordi, and Grau, Francesc X. (2008) An experimental study of transient natural convection in a side-cooled cavity. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics, - . From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2007) Natural convection adjacent to a sidewall with three fins in a differentially heated cavity. ANZIAM Journal, 48. pp. 806-819.

Xu, F., Patterson, J.C., and Lei, C. (2007) The leading edge effect in a suddenly differentially heated cavity. ANZIAM Journal, 48. pp. 790-805.

Lin, Wenxian, Armfield, S.W., and Patterson, J.C. (2007) Direct simulation of transitional plane fountains in a homogeneous fluid. ANZIAM Journal, 48. pp. 692-708.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) Effect of aspect ratio on natural convection in attics subject to periodic thermal forcing. ANZIAM Journal, 48. pp. 677-691.

Lei, Chengwang, and Patterson, John C. (2007) A numerical simulation of natural convection in an isosceles triangular enclosure heated from below. ANZIAM Journal, 48. pp. 630-644.

Holmes, D.W., and Loughran, J.G. (2007) A theory for the isolation of the complex deformation characteristics of nonlinear viscoelastic materials. ANZIAM Journal, 48. pp. 645-660.

He, Yinghe (2007) Breakup of a flow-focused emulsion jet for the production of matrix-structured microcapsules. Applied Physics Letters, 91 (25). pp. 1-3.

Knack, Adrian, Mazierska, Janina, and Piel, H (2007) Superconducting technology: development of a CDMA base station cryogenic front end receiver. In: Proceedings of Asia Pacific Microwave Conference 2007 (1), pp. 187-190. From: Asia Pacific Microwave Conference 2007, 11-14 December 2007, Bangkok, Thailand.

Berndt, Christopher C., and Hodzic, Alma (2007) Bagasse fibre for sustainable manufacturing. Journal of Biobased Materials and Bioenergy, 1 (3). pp. 289-300.

Williamson, N., Srinarayana, N., Armfield, S.W., McBain, G., and Lin, W. (2007) Characterisation of Low Reynolds Number Fountain Behaviour. In: Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, pp. 699-703. From: 16th Australasian Fluid Mechanics Conference, 3-7 December 2007, Gold Coast, Australia.

Steicke, C., Jegatheesan, V., and Zeng, C. (2007) Mechanical mode floating medium filters for recirculating systems in aquaculture for higher solids retention and lower freshwater usage. Bioresource Technology, 98 (17). pp. 3375-3383.

Jacob, Mohan, Subodh, G., Sebastian, Mailadil, Krupka, Jerzy, Mazierska, Janina, and Bialkowski, M (2007) Microwave characterisation of MgTe2O5 using quasi TE0np mode dielectric resonator technique. In: Proceedings of 2007 Asia-Pacific Microwave Conference, pp. 1481-1483. From: APMC Asia-Pacific Microwave Conference: Technology Convergence: Microwave for Life Sciences, 11-14 December 2007, Bangkok, Thailand.

Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J., and St John, David H. (2007) Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. Journal of Materials Science, 42 (23). pp. 9756-9764.

Deb, Kousik, Sivakugan, N., Chandra, Sarvesh, and Basudhar, P.K. (2007) Numerical analysis of multi layer geosynthetic-reinforced granular bed over soft fill. Geotechnical and Geological Engineering, 25 (6). pp. 639-646.

Srinarayana, N., Armfield, S.W., and Lin, W.X. (2007) Numerical simulation of free-fountains in a homogeneous fluid. In: Proceedings of the 16th Australasian Fluid Mechanics Conference, pp. 856-861. From: 16th Australasian Fluid Mechanics Conference, 3-7 December 2007, Gold Coast, Australia.

Ichim, I., Li, Q., Loughran, J., Swain, M.V., and Kieser, J. (2007) Restoration of non-carious cervical lesions: part I. modelling of restorative fracture. Dental Materials, 23 (12). pp. 1553-1561.

Nateghi, M, Patterson, J., and Armfield, S.W. (2007) Stratified natural convection flow in rectangular open cavities. ANZIAM Journal, 48. pp. 542-557.

Adams, S, Alam, F, Bond, I, Demidenko, S, Gui, X, Harris, R, Kennedy, F, Lai , E, Mazierska, Janina, Weehuizen, F, Alkazaki, M, Amstrong, J, Bullen, A, Cameron, M, Eichler, N, Guan , Y, Henderson, M, Jia, D, Jiang, F, Lowry, B, Lyon, M, McIntyre, D, Patel, P, Pereira, N, Oshana, S, Ryken, U, Selvaraj, S, Wai, D, White, J, and Xu, J (2007) SSETI ESEO New Zealand Ground Station Project. In: Proceedings of the Electronics New Zealand Conference, pp. 19-23. From: ENZCON 2007, 12-13 November 2007, Wellington, New Zealand.

Pirapakaran, Kandiah, and Sivakugan, Nagaratnam (2007) A laboratory model to study arching within a hydraulic fill stope. Geotechnical Testing Journal, 30 (6). pp. 496-503.

Mathan, M. Bobby, and Raja, V.S. (2007) Influence of heat treatment and scandium addition on the electrochemical polarization behavior of Al-Zn-Mg-Cu-Zr alloy. Metallurgical & Materials Transactions A, 38 (11). pp. 2843-2852.

Jegatheesan, V., Zeng, C., Shu, L., Manicom, C., and Steicke, C. (2007) Technological advances in aquaculture farms for minimal effluent discharge to oceans. Journal of Cleaner Production, 15 (16). pp. 1535-1544.

Louden, D., Inderbitzin, Stefanie, Peng, Z., and de Nys, R. (2007) Development of a new protocol for testing bath sponge quality. Aquaculture, 271 (1-4). pp. 275-285.

Leong, YeeKwong (2007) Surface forces arising from adsorbed hydrolysis products of metal ions in ZrO2 and silica dispersions: Cu(II), Ni(II), Co(II) and Al(III). Powder Technology, 179 (1-2). pp. 38-42.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Production of sub-micron emulsions by ultrasound and microfluidization techniques. Journal of Food Engineering, 82 (4). pp. 478-488.

Das, Braja, and Sivakugan, Siva (2007) Settlements of shallow foundations on granular soils - an overview. International Journal of Geotechnical Engineering, 1 (1). pp. 19-29.

Yuan, C.Q., Yan, X.P., and Peng, Z. (2007) Prediction of surface features of wear components based on surface characteristics of wear debris. Wear, 263 (7-12). pp. 1513-1517.

Yin, Ling, Han, Yi-Gang, Song, Xiao-Fei, and Wang, Hui (2007) Effect of diamond burs on process and damage involving in vitro dental resurfacing of a restorative porcelain. Journal of Physics D: applied physics, 40 (17). pp. 5291-5300.

Dombrowski, Richard D., Litster, James D., Wagner, Norman J., and He, Yinghe (2007) Crystallization of alpha-lactose monohydrate in a drop-based microfluidic crystallizer. Chemical Engineering Science, 62 (17). pp. 4802-4810.

Pamu, D., Narayana Rao, G.L., Raju, K.C. James, and Jacob, Mohan V. (2007) Effect of CuO on the sintering and cryogenic microwave characteristics of (Zr 0.8 Sn 0.2) TiO4 ceramics. Science and Technology of Advanced Materials, 8 (6). pp. 469-476.

Easton, C.D., Jacob, M.V., and Krupka, J. (2007) Non-destructive complex permittivity measurement of low permittivity thin film materials. Measurement Science and Technology, 18 (9). pp. 2869-2877.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Optimization of nano-emulsions production by microfluidization. European Food Research and Technology, 225 (5-6). pp. 733-741.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Effectiveness of encapsulating biopolymers to produce sub-micron emulsions by high energy emulsification techniques. Food Research International, 40 (7). pp. 862-873.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2007) Analytical study of influence of pile modeling on the response behavior of concrete structures. Proceedings of the Japan Concrete Institute, 29 (3). 847- 852.

Rankine, Rudd M., and Sivakugan, Nagaratnam (2007) Geotechnical properties of cemented paste backfill from Cannington Mine, Australia. Geotechnical and Geological Engineering, 25 (4). pp. 383-393.

Berndt, Christopher C., Rankine, Kirralee J., and Sivakugan, Nagaratnam (2007) Materials properties of barricade bricks for mining applications. Geotechnical and Geological Engineering, 25 (4). pp. 449-471.

Zhou, Shouqin, Ling, Weiqing, and Peng, Zhongxiao (2007) An RFID-based remote monitoring system for enterprise internal production management. International Journal of Advanced Manufacturing Technology, 33 (7-8). pp. 837-844.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Encapsulation of nanoparticles of d-limonene by spray drying: role of emulsifiers and emulsifying techniques. Drying Technology, 25 (6). pp. 1079-1089.

Chadalavada, Sreenivasulu, and Datta, Bithin (2007) Dynamic optimal monitoring network design for transient transport of pollutants in groundwater aquifers. Water Resources Management, 22 (6). pp. 651-670.

Lei, Chengwang, and Patterson, John C. (2007) Flow response to periodic forcing in a reservoir with water depth beyond the penetration depth of the solar radiation. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA, Australia.

Xu, F., Patterson, John C., and Lei, C. (2007) Observations of the thermal boundary layer flow along a vertical wall with a square obstruction in a side-heated cavity. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference, pp. 1-4. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2007) Simulations of the natural convection in a side-heated cavity with a square obstruction on the sidewall. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA.

Ibrahim, A., Lima, R.S., Berndt, C.C., and Marple, B.R. (2007) Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings. Surface and Coatings Technology, 201 (16-17). pp. 7589-7596.

Bhattacharjya, Rajib Kumar, Datta, Bithin, and Satish, Mysore (2007) Artificial neural networks approximation of density dependent saltwater intrusion process in coastal aquifers. Journal of Hydrologic Engineering, 12 (3). pp. 273-282.

Jacob, M.V., Pamu, D., and Raju, K.C. James (2007) Cryogenic microwave dielectric properties of sintered (Zr 0.8 Sn 0.2) TiO4 doped with CuO and ZnO. Journal of the American Ceramic Society, 90 (5). pp. 1511-1514.

Adam, C.J., and Loughran, J.G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109 (1301). pp. 272-284.

Rankine, R., Pacheco, M., and Sivakugan, N. (2007) Underground mining with backfills. Soils and Rocks, 30 (2). pp. 93-101.

Henderson, D.J., and Ginger, J.D. (2007) Vulnerability model of an Australian high-set house subjected to cyclonic wind loading. Wind & Structures, 10 (3). pp. 269-285.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, and Xia, Chaofeng (2007) An experimental study on the heat storage performances of polyalcohols NPG, TAX, PE, and AMPD and their mixtures as solid-solid phase-change materials for solar energy applications. International Journal of Green Energy, 4 (2). pp. 301-311.

Fabian, C.P., Ridd, M.J., and Sheehan, M.E. (2007) Assessment of activated polyacrylamide and guar as organic additives in copper electrodeposition. Hydrometallurgy, 86 (1-2). pp. 44-55.

Luick, John L., Mason, Luciano, Hardy, Thomas, and Furnas, Miles J. (2007) Circulation in the Great Barrier Reef Lagoon using numerical tracers and in situ data. Continental Shelf Research, 27 (6). pp. 757-778.

Lin, Wenxian, Armfield, S.W., and Patterson, John C. (2007) Cooling of a Pr<1 fluid in a rectangular container. Journal of Fluid Mechanics, 574. pp. 85-108.

Mphale, Kgakgamatso, Jacob, Mohan, and Heron, Mal (2007) Prediction and measurement of electron density and collision frequency in a weakly ionised pine fire. Journal of Infrared, Millimeter and Terahertz Waves, 28 (3). pp. 251-262.

Peng, Z. (2007) Osteoarthritis diagnosis using wear particle analysis technique: Investigation of correlation between particle and cartilage surface in walking process. Wear, 262 (5-6). pp. 630-640.

Denyer, P., Shu, L., and Jegatheesan, J. (2007) Evidence of changes in membrane pore characteristics due to filtration of dye bath liquors. Desalination, 204 (1-3). pp. 296-306.

Visvanathan, C., Choudhary, M.K., Montalbo, M.T., and Jegatheesan, J. (2007) Landfill leachate treatment using thermophilic membrane bioreactor. Desalination, 204 (1-3). pp. 8-16.

Pirapakaran, Kandiah, and Sivakugan, Nagaratnam (2007) Arching within hydraulic fill stopes. Geotechnical and Geological Engineering, 25 (1). pp. 25-35.

Curiac, Daniel-Ioan, Volosencu, Constantin, Doboli, Alex, Dranga, Octavian, and Bednarz, Tomasz (2007) Discovery of malicious nodes in wireless sensor networks using neural predictors. WSEAS Transactions on Computers Research, 2 (1). pp. 38-43.

Curiac, Daniel, Volosencu, Constantin, Doboli, Alex, Dranga, Octavian, and Bednarz, Tomasz (2007) Neural network based approach for malicious node detection in wireless sensor networks. In: Proceedings of the WSEAS International Conference on Circuits, Systems, Signal and Telecommunications, pp. 8-13. From: 2007 WSEAS International Conference on Circuits, Systems, Signal and Telecommunications, 17-19 January 2007, Gold Coast, QLD, Australia..

Liow, Jong-Leng, Frazer, Adrian, He, Yinghe, Eastwood, Kellie, and Phan, Cu (2007) Acid mist formation in the electrowinning of copper. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007, pp. 1373-1380. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Shinozaki, Hino, Aravinthan, Thiru, Pandey, Govinda Raj, and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: Proceedings of the 23rd Biennial Conference of the Concrete Institute of Australia, pp. 563-571. From: Concrete 07: Design, Materials & Construction: concrete for the future, 18-20 October 2007, Adelaide, SA, Australia.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, and Xia, Chaofeng (2007) Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters. Applied Energy, 84. pp. 425-441.

Knack, Adrian P., and Mazierska, Janina (2007) Assessment of superconducting technology for urban wireless communications. In: Proceedings of International Conference on Research, Innovation and Vision for the Future-Information and Communication Technologies, pp. 53-58. From: 2007 IEEE International Conference on Research, Innovation and Vision for the Future - Information and Communication Technologies, 5-9 March 2007, Hanoi, Vietnam.

Wei, Riyu, Zhang, Sheng, Karunasena, Warna, Sivakugan, Siva, and Zhang, Hongguang (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: Proceedings of the 7th WSEAS International Conference on Simulation, Modelling and Optimization, pp. 257-262. From: 7th WSEAS International Conference on Simulation, Modelling and Optimization, 15-17 September 2007, Beijing, China.

Singh, Shailesh, and Sivakugan, Nagaratnam (2007) Consolidation behavior of hydraulic fills. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (2), pp. 162-167. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Krupka, Jerzy, and Mazierska, Janina (2007) Contactless measurements of resistivity of semiconductor wafers employing single-post and split-post dielectric-resonator techniques. IEEE Transactions on Instrumentation and Measurement, 56 (5). pp. 1839-1844.

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007, pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Rankine, Kelda, Sivakugan, Siva, and Rankine, Kirralee (2007) Drainage behaviour of three-dimensional hydraulic fill stopes: a sensitivity analysis. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (1), pp. 220-225. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Lei, C., Armfield, S.W., Patterson, J.C., and O'Neill, A. (2007) Effects of corner geometry and adiabatic extensions on heat transfer through a differentially heated square cavity. In: 16th Australasian Fluid Mechanics Conference, pp. 125-128. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Jegatheesan, V., Kim, S.H., and Joo, C.K. (2007) Evaluating the drinking water quality through an efficient chlorine decay model. Water Science and Technology: Water Supply, 6 (4). pp. 1-7.

Kikkert, Cornelius Jan (2007) Filter requirements for wideband mobile radio systems. In: Proceedings of Sixth International Conference on Information, Communications and Signal Processing,, pp. 1-5. From: ICICS 2007 Sixth International Conference on Information, Communications and Signal Processing, 10-13 December 2007, Singapore.

Lei, C., and Patterson, J.C. (2007) Flow response to periodic thermal forcing in a reservoir with water depth beyond the penetration depth of solar radiation. Australian Journal of Mechanical Engineering, 4 (1). pp. 29-37.

Jin, Yan, He, Yinghe, and Davies, Nigel (2007) Formulation and stability evaluation of surfactant-free water-in-(highly volatile) oil emulsions. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007, pp. 366-373. From: Chemeca 2007: academia and industry - strengthening the profession., 23-26 September 2007, Melbourne, Victoria, Australia.

Bednarz, T.P., Lei, C., Patterson, J.C., and Ozoe, H. (2007) How expensive space-zero-gravity convection experiments can be carried out in terrestrial conditions - magnetic convection of a paramagnetic fluid. In: 16th Australasian Fluid Mechanics Conference, pp. 368-372. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Pirapakaran, K., Singh, S., and Sivakugan, N. (2007) Hydraulic fill research at James Cook University in the new millennium. In: Proceedings of Minefill 2007, pp. 1-8. From: 9th International Symposium on Mining with Backfill: Innovation and Experience, 29 Apr-2 May 2007, Montreal, Quebec, Canada.

Pirapakaran, Kandiah, Sivakugan, Nagaratnam, and Rankine, Rudd (2007) Investigations into strength of Cannington paste fill mixed with blended cements. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (2), pp. 144-149. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Jacob, M.V., and Raju, K.C. James (2007) Microwave characterisation of dielectric materials - an overview. In: Proceedings on International Conference on Advanced Materials and Composites, pp. 765-772. From: International Conference on Advanced Materials and Composites, 24-26 October 2007, Thiruvananthapuram, India.

Xu, F., Patterson, J.C., and Lei, C. (2007) Natural convection in a differentially heated cavity with a square obstruction on the sidewall. Australian Journal of Mechanical Engineering, 4 (1). pp. 77-86.

Mao, Yadan, Lei, Chengwang, and Patterson, John (2007) Natural convection in a triangular enclosure induced by solar radiation. In: 16th Australasian Fluid Mechanics Conference, pp. 406-410. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) On the natural convection boundary layer adjacent to an inclined flat plate subject to ramp heating. In: 16th Australasian Fluid Mechanics Conference, pp. 121-124. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast.

Bednarz, T.P., Lei, C., and Patterson, J.C. (2007) Particle image thermometry for natural convection flows. In: 16th Australasian Fluid Mechanics Conference, pp. 1165-1170. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Austrlia.

Willis, Simon, and Kikkert, Cornelis Jan (2007) Radio propagation model for long-range wireless sensor networks. In: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007. From: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007, 10-13 Dec 2007, Singapore.

Pandey, G.R., Mutsuyoshi, H., and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: Proceedings of the First Asia Pacific Conference on FRP in Structures (1), pp. 79-86. From: Asia-Pacific Conference on FRP in Structures, 12-14 December 2007, Hong Kong, China.

Jafari, Seid, He, Yinghe, and Bhandari, Bhesh (2007) Role of powder particle size on the encapsulation efficiency of oils during spray drying. Drying Technology, 25 (6). pp. 1081-1089.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) Scaling analysis of the thermal boundary layer adjacent to an abruptly heated inclined flat plate. In: 16th Australasian Fluid Mechanics Conference, pp. 117-120. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Armfield, S.W., Patterson, John C., and Lin, Wenxian (2007) Scaling investigation of the natural convection boundary layer on an evenly heated plate. International Journal of Heat and Mass Transfer, 50 (7-8). pp. 1592-1602.

Rankine, Briony, and Sivakugan, Nagaratnam (2007) Short term lateral deformations induced in an elastic medium through the application of rigid embankment loading. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (1), pp. 214-219. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Mathew, Vincent, and Jacob, Mohan V. (2007) Simulation of microstrip structures on LTCC substrates. In: Proceedings of the International Conference on Advanced Materials and Composites, pp. 696-700. From: International Conference on Advanced Materials and Composites, 24-26 October 2007, Thiruvananthapuram, India.

Ebersbach, Stephan, Peng, Zhongxiao, and Kessissoglou, Nicole (2007) Smart condition monitoring by intergration of vibration, oil and wear particle analysis. In: Proceedings of the 14th International Congress on Sound and Vibration 2007, pp. 1-9. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ali, M.I. (2007) Struvite crystallization in fed-batch pilot scale and description of solution chemistry of struvite. Chemical Engineering Research and Design, 85 (3). pp. 344-356.

Jacob, Mohan V. (2007) Temperature dependence of the complex permittivity of Greentapes. In: Proceedings of Symposium P: Electromagnetic Materials (ICMAT 2007), pp. 44-47. From: International Conference on Materials for Advanced Technologies 2007, 1-6 July 2007, Singapore.

Xu, F., Patterson, J.C., and Lei, C. (2007) Transient natural convection in a differentially heated cavity with a thin fin of different lengths on a sidewall. In: Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, pp. 402-405. From: Sixteenth Australasian Fluid Mechanics Conference, 3 - 7 December 2007, Gold Coast, QLD, Australia.

Ginger, J.D., Henderson, D.J., Leitch, C.J., and Boughton, G.N. (2007) Tropical Cyclone Larry: Estimation of wind field and assessment of building damage. Australian Journal of Structural Engineering, 7 (3). pp. 209-224.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, and Xia, Chaofeng (2007) A comparative study of the thermal performances of cross-corrugated and V-groove solar air collectors. International Journal of Green Energy, 4 (4). pp. 427-451.

Kikkert, cornelis Jan (2007) The design of a Ka band satellite beacon receiver. In: Proceedings of the Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007. From: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007, 10-13 Dec 2007, Singapore.

Xu, F., Patterson, J.C., and Lei, C. (2007) An experimental study of the thermal flow around a thin fin on the sidewall of a differentially heated cavity. In: 16th Australasian Fluid Mechanics Conference, pp. 398-401. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, Luo, Chuanxu, Li, Ming, Zheng, Qinhong, and Xia, Chaofeng (2007) A parametric study on the thermal performance of a solar air collector with a v-groove absorber. International Journal of Green Energy, 4. pp. 601-622.

Michlik, P., and Berndt, C. (2006) Image-based extended finite element modeling of thermal barrier coatings. Surface and Coatings Technology, 201 (6). pp. 2369-2380.

Liovic, Peter, Rudman, Murray, Liow, Jong-Leng, Lakehal, Djamel, and Kothe, Doug (2006) A 3D unsplit-advection volume tracking algorithm with planarity-preserving interface reconstruction. Computers & Fluids, 35 (10). pp. 1011-1032.

Holmes, D.W., Loughran, J.G., and Suehrcke, H. (2006) Constitutive model for large strain deformation of semicrystalline polymers. Mechanics of Time Dependent Materials, 10 (4). pp. 281-313.

Mazierska, Janina, and Jacob, Mohan V. (2006) How accurately can the surface resistance of various superconducting films be measured with the sapphire Hakki–Coleman dielectric resonator technique? Journal of Superconductivity and Novel Magnetism, 19 (7-8). pp. 649-655.

Shu, L., Schneider, P., Jegatheesan, V., and Johnson, J. (2006) An economic evaluation of phosphorus recovery as struvite from digester supernatant. Bioresource Technology, 97 (17). pp. 2211-2216.

Li, Qing, Loughran, Jeffery, Peng, Zhongxiao, and Osborne, John (2006) A fracture based model for wear debris formation. Key Engineering Materials, 324 (2006). pp. 1157-1160.

Yao, X. (2006) Effect of solute redistribution on the growth kinetics in solidification. International Journal of Modern Physics B, 20 (25-27). pp. 3938-3943.

Yao, X., and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128.

Jacob, M.V., Hartnett, J.G., Mazierska, J., Krupka, J., and Tobar, M.E. (2006) Dielectric characterisation of barium fluoride at cryogenic temperatures using TE011 and quasi TE0mn mode dielectric resonators. Cryogenics, 46 (10). pp. 730-735.

Sivakugan, Nagaratnam, and Rankine, Kelda S. (2006) A simple solution for drainage through a 2-dimensional hydraulic fill stope. Geotechnical and Geological Engineering, 24 (5). pp. 1229-1241.

Racek, O., Berndt, Christopher C., Guru, D.N., and Heberlein, J. (2006) Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques. Surface & Coatings Technology, 201 (1). pp. 338-346.

Campbell, G.R., Leong, Y.K., Berndt, C.C., and Liow, J.L. (2006) Ammonium phosphate slurry rheology and particle properties - The influence of Fe(III) and A(III) impurities, solid concentration and degree of neutralization. Chemical Engineering Science, 61 (17). pp. 5856-5866.

Tiranuntakul, M., Schneider, P.A., Jegatheesan, V., and Fracchia, H.L. (2006) Modelling based design of a pilot-scale membrane bioreactor for combined nutrient removal from domestic wastewater. In: Proceedings of the World Water Congress. From: 5th Biennial World Water Congress, 10-14 September 2006, Beijing, China.

Johnson, K., Lemcke, P., Karunasena, W., and Sivakugan, N. (2006) Modelling the load-deformation response of deep foundations under oblique loading. Environmental Modelling & Software, 21 (9). pp. 1375-1380.

Monk, J.S., and Jegatheesan, V. (2006) Sugar and molasses optimization during denitrification of aquaculture wastewater in a membrane bioreactor. In: Proceedings of the World Water Congress. From: 5th Biennial World Water Congress, 10-14 SEP 2006, Beijing, China.

Yao, X. (2006) On the solute coupling at the moving solid-liquid interface during equiaxed solidification. Applied Physics Letters, 89 (7). pp. 71903-71905.

Abbosh, A.M., Bialkowski, M.E., Jacob, M.V., and Mazierska, J. (2006) Design of a compact ultra-wideband antenna. Microwave & Optical Technology Letters, 48 (8). pp. 1515-1518.

Britton, P.F., Sheehan, M.E., and Schneider, P.A. (2006) A physical description of solids transport in flighted rotary dryers. Powder Technology, 165 (3). pp. 153-160.

Jacob, Mohan V., Krupka, Jerzy, Mazierska, Janina, and Woods, Graham (2006) Cryogenic complex anisotropic permittivity of magnesium fluoride. Materials Science and Engineering: A , 427 (1). pp. 175-180.

Tri, P.T., Visvanathan, C., and Jegatheesan, V. (2006) Biological treatment of oily wastewater from gas stations by membrane bioreactor. Journal of Environmental Engineering and Science, 5 (4). pp. 309-316.

Yao, Xiangdong, Wu, Chengzhang, Du, Aijun, Lu, Gao Qing, Cheng, Huiming, Smith, Sean C., Zou, Jin, and He, Yinghe (2006) Mg-based nanocomposites with high capacity and fast kinetics for hydrogen storage. Journal of Physical Chemistry Part B, 110 (24). pp. 11697-11703.

Li, Qing, Ichim, Ionut, Loughran, Jeff, Li, Wei, Swain, Michael, and Kieser, Jules (2006) Numerical simulation of crack formation in all ceramic dental bridge. Key Engineering Materials, 312. pp. 293-298.

Sivakugan, Nagaratnam, Rankine, Kirralee, and Rankine, Rudd (2006) Permeability of hydraulic fills and barricade bricks. Geotechnical and Geological Engineering, 24 (3). pp. 661-673.

Ali, Md. Imtiaj, and Schneider, Philip Andrew (2006) A fed-batch design approach of struvite system in controlled supersaturation. Chemical Engineering Science, 61 (12). pp. 3951-3961.

Liu, Yi, Jin, Feng, and Li, Qing (2006) A strength-based multiple cutout optimization in composite plates using fixed grid finite element method. Composite Structures, 73 (4). pp. 403-412.

Abbosh, A.M., Bialkowski, M.E., Jacob, Mohan V., and Mazierska, Janina (2006) Design of a planar UWB antenna with signal rejection capability in a narrow sub-band. In: Proceedings of the IEEE 63rd Vehicular Technology Conference (6). From: IEEE 63rd Vehicular Technology Conference, 7-10 May 2006, Melbourne, VIC, Australia.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Ab initio studies of hydrogen desorption from low index magnesium hydride surface. Surface Science, 600 (9). pp. 1854-1859.

Fabian, Cesimiro P., Mandin, Philippe, Ridd, Michael, and Sheehan, Madoc (2006) Hydrodynamic modeling of copper electrodeposition at a vertical rotating cylinder electrode. ECS Transactions, 2 (3). pp. 303-315.

Mandin, Philippe, Fabian, Cesimiro, and Lincot, Daniel (2006) Importance of the density gradient effects in modelling electrodeposition process at a rotating cylinder electrode. Electrochimica Acta, 51 (19). pp. 4067-4079.

Abbosh, A.M., Bialkowski, M.E., Mazierska, J., and Jacob, M.V. (2006) A planar UWB antenna with signal rejection capability in the 4-6 GHz band. IEEE Microwave and Wireless Components Letters, 16 (5). pp. 278-280.

Britton, Paul, and Loughran, Jeffrey (2006) Application of image measurement and continuum mechanics to the direct measurement of two-dimensional finite strain in a complex fibro-porous material. International Journal for Computational Methods in Engineering Science &Mechanics, 7 (2). pp. 81-90.

Zahedi, A. (2006) Solar photovoltaic (PV) energy; latest developments in the building integrated and hybrid PV systems. Renewable Energy, 31 (5). pp. 711-718.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2006) Experimental observations of the thermal flow around a square obstruction on a vertical wall in a differentially heated cavity. Experiments in Fluids, 40 (3). pp. 364-371.

Singh, Raj Mohan, and Datta, Bithin (2006) Identification of groundwater pollution sources using GA-based linked simulation optimization model. Journal of Hydrologic Engineering, 11 (2). pp. 101-109.

Ng, Wai K., Jegatheesan, Veeriah, and Lee, Seung-Hwan (2006) Influence of particle concentration on initial collection efficiency and surface coverage in porous media filtration. Korean Journal of Chemical Engineering, 23 (2). pp. 333-342.

Berndt, Christopher C., and Montavon, Ghislain (2006) Thermal spray: preserving 100 years of technology. Journal of Thermal Spray Technology, 15 (1). pp. 5-8.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Catalytic effects of subsurface carbon in the chemisorption of hydrogen on a Mg(0001) surface: an ab-initio study. Journal of Physical Chemistry Part B , 110 (4). pp. 1814-1819.

Rankine, K.J., Sivakugan, N., and Cowling, R. (2006) Emplaced geotechnical characteristics of hydraulic fills in a number of Australian mines. Geotechnical and Geological Engineering, 24 (1). pp. 1-14.

Mandin, Ph., Fabian, C., and Lincot, D. (2006) Mean and unsteady hydrodynamic and mass transport properties at a rotating cylinder electrode: from laminar to transitional flow regime. Journal of Electroanalytical Chemistry, 586 (2). pp. 276-296.

Ebersbach, S., Peng, Z., and Kessissoglou, N.J. (2006) The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques. Wear, 260 (1-2). pp. 16-24.

Du, A.J., Smith, Sean C., Yao, X.D., He, Y., and Lu, G.Q. (2006) Atomic hydrogen diffusion in novel magnesium nanostructures: the impact of incorporated subsurface carbon atoms. Journal of Physics: conference series, 29. pp. 167-172.

Karunasena, W., and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites, pp. 131-136. From: ACUN-5: International Composites Conference: Advanced, Infrastructure, Natural and Nanocomposites, 11-14 July 2006, Sydney, NSW, Australia.

Virkutyte, Jurate, and Sillanp¨���, Mika (2006) Chemical evaluation of potable water in Eastern Qinghai Province, China: Human health aspects. Environment International, 32 (1). pp. 80-86.

Dan, N.P., Visvanathan, C., Ben Aim, R., and Jegatheesan, V. (2006) Comparative study on the performance of yeast and bacterial membrane bioreactors for high salinity wastewater treatment. International Journal of Environmental Technology and Management, 6 (6). pp. 612-630.

Willis, Simon, and Kikkert, Cornelius J. (2006) Design of a long-range wireless sensor node. In: Proceedings of the 2006 IEEE Asia Pacific Conference on Circuits and Systems, pp. 151-154. From: 2006 IEEE Asia Pacific Conference on Circuits and Systems, 4-7 December 2006, Singapore.

Lee, Andrew, Britton, Paul, and Sheehan, Madoc (2006) Experimental measurement of the drag coefficient for a falling raw sugar particle. International Sugar Journal, 108 (1296). pp. 678-682.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) First-principle study of adsorption of hydrogen on Ti-doped Mg (0001) surface. Journal of Physical Chemistry Part B, 110 (43). pp. 21747-21750.

Karunasena, W., and Anderson, W.C. (2006) Flexural behaviour of concrete beams reinforced with internal tensile steel and external CFRP. In: Computational Methods, pp. 1793-1797. From: ICCM04 First International Conference on Computational Methods, 15-17 December 2004, Singapore.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2006) Flight unloading in rotary sugar dryers. International Sugar Journal, 108 (1286). pp. 83-89.

Sivakugan, N., Rankine, R.M., Rankine, K.J., and Rankine, K.S. (2006) Geotechnical considerations in mine backfilling in Australia. Journal of Cleaner Production, 14 (12). pp. 1168-1175.

Jacob, Mohan V. (2006) Influence of RF heating on microwave loss. In: Proceedings of the 2006 International Conference on Microwaves, Radar & Wireless Communications (1), pp. 247-250. From: MIKON 2006 International Conference on Microwaves, Radar & Wireless Communications 2006, 22-24 May 2006, Krakow, Poland.

Karunasena, Karu W., and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: Proceedings of the Tenth East Asia-Pacific Conference on Structural Engineering and Construction, pp. 129-134. From: EASEC10 Tenth East Asia-Pacific Conference on Structural Engineering and Construction, 3-5 August 2006, Bangkok, Thailland.

Zychowicz, Tomasz, Krupka, Jerzy, and Mazierska, Janina (2006) Measurements of conductivity of thin gold films at microwave frequencies employing resonant techniques. In: 2006 Asia-Pacific Microwave Conference Proceedings, pp. 572-574. From: APMC 2006 Asia Pacific Microwave Conference 2006, 12-15 December 2006, Yokohama, Japan.

Jacob, Mohan, Krupka, Jerzy, Derzakowski, Krzysztof, and Mazierska, Janina (2006) Measurements of thin polymer films employing split post dielectric resonator technique. In: Proceedings of the 2006 International Conference on Microwaves, Radar & Wireless Communications, pp. 229-231. From: MIKON 2006 International Conference on Microwaves, Radar & Wireless Communications 2006, 22-24 May 2006, Krakow, Poland.

Hodzic, A., Curro, R., Britton, P, Shu, L., Berndt, C.C., and Shanks, R.A. (2006) Mechanical properties of PHB-Bagasse composites. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites, pp. 156-161. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Mazierska, J., Krupka, J., Bialkowski, M., and Jacob, M.V. (2006) Microwave resonators and their use as measurement instruments and sensors. In: Proceedings of the Third IEEE International Workshop on Electronic Design, Test and Applications 2006. From: Third IEEE International Workshop on Electronic Design, Test and Applications 2006, 17-19 January 2006, Kuala Lumpur, Malaysia.

Yao, X. (2006) Modeling and experimental study of the interface morphology and growth kinetics for fibrous growth of eutectic. Journal of Materials Research, 21 (12). pp. 3009-3016.

van Gool, Bronwyn, Karunasena, Karu, and Sivakugan, Siva (2006) Modelling the effects of blasting on paste fill. In: Computational Methods, pp. 695-700. From: ICCM04 First International Conference on Computational Methods, 15-17 December 2004, Singapore.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2006) Nano-emulsion production by sonication and microfluidization: a comparison. International Journal of Food Properties, 9 (3). pp. 475-485.

Guru, D.N., Heberlein, J.V.R., Mook, W.M., Gerberich, W.W., and Berndt, C.C. (2006) Nanostructured partially stabilized zirconia as an interlayer in a multi layered thermal barrier coating. In: Proceedings of the 2006 International Thermal Spray Conference. From: Thermal Spray 2006: Science, Innovation and Application, 15-18 May 2006, Seattle, WA, USA.

Saha, S.C., Lei, C., and Patterson, J.C. (2006) Natural convection in a triangular enclosure subject to periodic thermal forcing. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Lei, Chengwang, and Patterson, John C. (2006) Natural convection induced by diurnal heating and cooling in a reservoir with slowly varying topography. JSME International Journal - Series B: Fluids and Thermal Engineering, 49 (3). pp. 605-615.

Pirapakaran, K., and Sivakugan, N. (2006) Numerical and experimental studies of arching effects within mine fill slopes. In: Proceedings of the Sixth International Conference on Physical Modelling in Geotechnics (2), pp. 1519-1525. From: 6th International Conference on Physical Modelling in Geotechnics, 4-6 August 2006, Hong Kong.

Xu, F., Patterson, J.C., and Lei, C. (2006) Observation and simulation of the double layer structure of the thermal boundary layer in a side-heated cavity. Journal of Flow Visualization & Image Processing, 13 (3). pp. 287-297.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2006) Quantitative characterization of collagen orientation in the superficial zone for studying early degenerative changes in articular cartilage. Journal of Musculoskeletal Research, 10 (1). pp. 1-12.

Wadhwa, L.C., and Thomson, M. (2006) Relative safety of alternative intersection designs. In: Brebbia, C.A., and Dolezel, V., (eds.) Urban Transport XII: urban transport and the environment in the 21st century. WIT Press, Southhampton, UK, pp. 379-388.

Fabian, Cesimiro, Ridd, Michael, and Sheehan, Madoc (2006) Rotating cylinder electrode study of the effect of activated polyacrylamide on surface roughness of electrodeposited copper. Hydrometallurgy, 84 (3-4). pp. 256-263.

Sivakugan, N., Rankine, K.J., and Rankine, K.S. (2006) Study of drainage through hydraulic fill stopes using methods of fragments. Geotechnical and Geological Engineering, 24 (1). pp. 79-89.

Shu, Li, Berndt, Christopher C., and Hodzic, Alma (2006) Sugar cane bagasse fibre for sustainable manufacturing: an overview of applications. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites, pp. 248-253. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Jacob, Mohan V., Krupka, Jerzy, Mazierska, Janina, and Bialkowski, Merek (2006) Temperature dependence of complex permittivity of planar microwave materials. In: 2006 Asia-Pacific Microwave Conference Proceedings (3), pp. 1453-1456. From: APMC 2006 Asia Pacific Microwave Conference 2006, 12-15 December 2006, Yokohama, Japan.

Xu, F., Patterson, J.C., and Lei, C. (2006) Thermal boundary layer flow and heat transfer in a differentially heated cavity with a thin fin on the sidewall. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Hardeo, P., and Karunasena, W. (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites, pp. 282-287. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Mariaux, G., Vardelle, A., Vardelle, M., and Berndt, C. (2006) Time-dependent gas dynamics and gas-particle heat and mass transfer during plasma spray deposition. In: Proceedings of the 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Meekan, M.G., Carleton, J.H., Steinberg, C.R., McKinnon, A.D., Brinkman, R., Doherty, P.J., Halford, A., Duggan, S., and Mason, L. (2006) Turbulent mixing and mesoscale distributions of late-stage fish larvae on the NW shelf of Western Australia. Fisheries Oceanography, 15 (1). pp. 44-59.

Kikkert, Cornelius J. (2006) Two novel phase-frequency detectors. In: Proceedings of the 2006 IEEE Asia Pacific Conference on Circuits and Systems , pp. 713-716. From: APCCAS 2006 IEEE Asia Pacific Conference on Circuits and Systems . APCCAS 2006, 4-7 December 2006, Singapore.

Xu, F., Patterson, J.C., and Lei, C. (2006) Visualization of the thermal flow around thin fin on the hot wall of a differentially heated rectangular cavity. In: Proceedings of the Joint U.S.-European Fluids Engineering Summer Meeting, pp. 1-8. From: 2006 ASME 2nd Joint U.S.-European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, FL, USA.

Piel, H., Aminov, B., Aminova, F., Cao, B., Getta, M., Kolesov, S., Knack, A., Mazierska, J., Pupeter, N., Bin, Wei, Wehler, D., and Xiaoping, Zhang (2006) A cryogenic front end for CDMA and UMTS wireless base stations. Journal of Physics: conference series, 43. pp. 1354-1357.

Lubansky, A.S., Yeow, Y. Leong, Leong, Yee-Kwong, Wickramasinghe, S. Ranil, and Han, Binbing (2006) A general method of computing the derivative of experimental data. AIChE Journal, 52 (1). pp. 323-332.

Lin, Wenxian, Gao, Wenfeng, and Liu, Tao (2006) A parametric study on the thermal performance of cross-corrugated solar air collectors. Applied Thermal Engineering, 26 (10). pp. 1043-1053.

Leong, Yee-Kwong (2005) Yield stress and zeta potential of nanoparticulate silica dispersions under the influence of adsorbed hydrolysis products of metal ions - Cu(II), A1(III) and Th(IV). Journal of Colloid and Interface Science, 292 (2). pp. 558-566.

Fell, A., Jegatheesan, V., Sadler, A., and Lee, S.H. (2005) Baseline measurement on the performance of four constructed wetlands in tropical Australia. Environmental Engineering Research, 10 (6). pp. 316-327.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2005) Dielectric properties of Yttrium Vanadate crystals from 15 K to 295 K. Journal of Electroceramics, 15 (3). pp. 237-241.

Kikkert, Cornelis Jan (2005) Dual coupled resonator local oscillator. In: Proceedings of IEEE TENCON '05 Conference, pp. 1-6. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

Jacob, M.V., and Mazierska, J. (2005) Planar Ba(MgxTay)O3 material for emerging microwave technologies. In: Proceedings of IEEE TENCON Conference 2005, pp. 1-5. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

Visvanathan, C., Thu, L.N., Jegatheesan, V., and Anotai, J. (2005) Biodegradation of pentachlorophenol in a membrane bioreactor. Desalination, 183 (1-3). pp. 455-464.

Tiranuntakul, M., Jegatheesan, V., Schneider, P. A., and Fracchia, H.L. (2005) Performance of an oxidation ditch retrofitted with a membrance bioreactor during the start-up. Desalination, 183 (1-3). pp. 417-424.

Surendran, Kuzhichalil P., Sebastian, Mailadil T., Mohanan, Pezholil, and Jacob, Mohan V. (2005) The effect of dopants on the microwave dielectric properties of Ba(Mg0.33Ta0.67)O3 ceramics. Journal of Applied Physics, 98 (9). pp. 1-9.

Loughran, J.G., and Kannapiran, Arasu (2005) Three-dimensional simulation of the rolling of a saturated fibro-porous media. Finite Elements in Analysis and Design, 42 (1). pp. 90-104.

Adam, C., and Loughran, J. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92 (2). pp. 255-263.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2005) The role of Ti as a catalyst for the dissociation of hydrogen on a Mg(0001) surface. Journal of Physical Chemistry Part B, 109 (38). pp. 18037-18041.

Rankine, K. S., and Sivakugan, N. (2005) A 2D numerical study of the effects of anistropy, ancillary drainage and geometry on flow through hydraulic fill mine stopes. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2), pp. 955-958. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Sivakugan, Nagaratnam, Rankine, Kirralee , and Rankine, Rudd (2005) Geotechnical aspects of hydraulic filling of underground mine stopes in Australia. In: Indraratna, Buddhima, Chu, Jian, and Hudson, John A., (eds.) Ground Improvement: case histories. Geo-Engineering Book Series, 3 . Elsevier , Oxford, UK, pp. 513-538.

Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.

Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A model for solids transport in flighted rotary dryers based on physical considerations. Chemical Engineering Science, 60 (15). pp. 4171-4182.

James, M.K., and Mason, L.B. (2005) Synthetic tropical cyclone database. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 131 (4). pp. 181-192.

Li, Wei, Swain, Michael V., Li, Qing, and Steven, Grant P. (2005) Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: applied biomaterials, 74B (1). pp. 520-528.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear, 259 (1). pp. 512-518.

Zhu, Liqun, Feng, Liu, and He, Yinghe (2005) Composite nickel coatings containing lubricating oil microcapsules and their tribological properties. Plating & Surface Finishing, 92 (6). pp. 49-53.

Jacob, M.V., Sundaresan, A., Mazierska, J., and Tanaka, Y. (2005) Investigations on microwave power dependence of high quality TI-1223 thin films on LSAT substrate. IEEE Transactions on Applied Superconductivity, 15 (2). pp. 3596-3599.

Jacob, M.V., Mazierska, J., Harada, Y., Takahashi, T., and Yoshizawa, M. (2005) Microwave characterization of as-grown MgB2 thin films prepared by molecular beam epitaxy. IEEE Transactions on Applied Superconductivity, 15 (2). pp. 3317-3320.

Bhattacharjya, Rajib Kumar, and Datta, Bithin (2005) Optimal management of coastal aquifers using linked simulation optimization approach. Water Resource Management, 19 (3). pp. 295-320.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2005) Shadowgraph observations of the transition of the thermal boundary layer in a side-heated cavity. Experiments in Fluids, 38 (6). pp. 770-779.

Ali, Md Imtiaj, and Schneider, Philip Andrew (2005) Crystallization of struvite from metastable region with different types of seed crystal. Journal of Non-Equilibrium Thermodynamics, 30 (2). pp. 95-111.

Ali, MD Imtiaj, Schneider, Philip A., and Hudson, Neale (2005) Thermodynamic and solution chemistry of struvite. Journal of the Indian Institute of Science, 85 (3). pp. 141-149.

Yeow, Y Leong, and Leong, Yee-Kwong (2005) A general computational method for converting normal spectra into derivative spectra. Applied Spectroscopy, 59 (5). pp. 584-592.

Yuan, Chengqing, Peng, Zhongxiao, and Yan, Xinping (2005) Surface characterization using wavelet theory and confocal laser scanning microscopy. Journal of Tribology, 127 (2). pp. 394-404.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) A complete solution for neutral knowledge representation within collaborative product development environment. International Journal of Advanced Manufacturing Technology, 25 (7-8). pp. 761-771.

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2005) Active control of connected plates using single and multiple actuators and error sensors. Journal of Sound and Vibration, 281 (1-2). pp. 73-97.

Ebersbach, Stephan, and Peng, Zhongxiao (2005) The development of a comprehensive machine condition monitoring program. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring, pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Shu, L., Waite, T.D., Bliss, P.J., Fane, A., and Jegatheesan, V. (2005) Nanofiltration for the possible reuse of water and recovery of sodium chloride salt from textile effluent. Desalination, 172 (3). pp. 235-243.

Jegatheesan, Veeriah, Vigneswaran, Saravanamuth, and Lee, Seung-Hwan (2005) Deposition of submicron particles in deep bed filtration under unfavorable conditions. Korean Journal of Chemical Engineering, 22 (1). pp. 142-146.

Campbell, Graeme R., Leong, Yee-Kwong, and Yeow, Y. Leong (2005) Obtaining the shear stress shear rate relationship and yield stress of liquid foods from parallel disk data. Journal of Food Science, 70 (1). pp. 50-55.

Mazierska, Janina, Ledenyov, Dimitri, Jacob, Mohan V., and Krupka, Jerzy (2005) Precise microwave characterization of MgO substrates for HTS circuits with superconducting post dielectric resonator. Superconductor Science & Technology, 18 (1). pp. 18-23.

Yeow, Y. Leong, Chandra, Dolly, Sardjono, Albert A., Wijaya, Hartono, Leong, Yee-Kwong, and Khan, Ash (2005) A general method for obtaining shear stress and normal stress functions from parallel disk rheometry data. Rheologica Acta, 44 (3). pp. 270-277.

Duan, M. (2005) Adaptive hybrid/mixed finite element analysis of singular problems. In: Proceedings of 4th Australian Congress on Applied Mechanics, pp. 95-100. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Duan, Mei, and Loughran, Jeffrey G. (2005) Application of a dewatering model for fibroporous media under constrained uniaxial compression. Journal of Porous Media, 8 (5). pp. 431-442.

Loughran, J.G., and Leonardi, C. (2005) Application of discrete element methods to modelling of belt feeders. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics, pp. 119-124. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Rahman, Mohammad M. , He, Yinghe, and Davies, Nigel M. (2005) Application of laminar jet break-up to the preparation of monodisperse microparticulate drug delivery systems. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Jacob, Mohan V. (2005) Are the parameters Q0xf0, temperature coefficient of frequency and temperature coefficient of permittivity fundamental material constants? In: Proceedings of IEEE TENCON Conference 2005, pp. 1-5. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

Virkutyte, Jurate (2005) Copper and chromium electrodialytic migration in CCA-Treated timber waste. Water, Air and Soil Pollution, 160 (1-4). pp. 27-39.

Virkutyte, Jurate (2005) Copper and trace metal fractionation in sludge. Environmental Pollution, 138 (3). pp. 517-528.

Jegatheesan, V., and Vigneswaran, S. (2005) Deep bed filtration: mathematical models and observations. Critical Reviews in Environmental Science and Technology, 35. pp. 515-569.

Rankine, Kirralee J., and Sivakugan, Nagaratnam (2005) Drainage characteristics and behaviour of hydraulically placed mine fill and fill barricades. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2), pp. 579-582. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Wadhwa, Lal C. (2005) Enhancing urban sustainability through integrated transport planning in three largest Australian cities. In: Brebbia, C.A., and Wadhwa, L.C., (eds.) Urban Transport XI: urban transport and the environment in the 21st Century. Advances in Transport, 77 . WIT Press, Southampton, UK, pp. 333-342.

Bode, Lance, and Mason, Luciano B. (2005) Evaluation of a nonlinear reef parametrisation for steady flows. ANZIAM Journal, 46 (E). pp. 1017-1034.

Henderson, D.J., and Ginger, J.D. (2005) Fatigue failure of roof components subjected to wind loading. In: Proceedings of Australian Structural Engineering Conference 2005, pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Wadhwa, L.C. (2005) Financing of the transport infrastructure in Australia. In: Brebbia, C.A., and Wadhwa, L.C., (eds.) Urban Transport XI: urban transport and the environment in the 21st century. WIT Transactions on The Built Environment, 77 . WIT Press, Ashurst, UK, pp. 861-872.

Duan, M., and Loughran, J.G. (2005) Heuristic model for the permeability of a saturated fibro porous media with application to prepared sugar cane. In: Proceedings of 4th Australian Congress on Applied Mechanics, pp. 131-136. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Cole, D.E., and Liow, J-L. (2005) High-framing rate PIV for vortex ring visualisation. In: Proceedings of the Fourth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, pp. 25-28. From: Fourth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 7-9 December 2005, McLaren Vale, SA, Australia.

Quinn, Wade, Jegatheesan, Veeriah, Millard, Lindsay, Wheeler, Lauren, and Kauppila, David (2005) Hydraulic modelling of gross pollutant traps for North Queensland conditions. In: Papers from the Ozwater Specialist Conference, pp. 1-8. From: Ozwater Specialist Conference, 5 - 7 May, 2005, Townsville, QLD, Australia.

Britton, Paul, Teh, E-Jen, and Close, Donald (2005) Investigation of bagasse as a thermal insulator. In: Proceedings of the 2005 Conference of the Australian Society of Sugar Cane Technologists (27), pp. 462-471. From: 27th Annual Conference Australian Society of Sugar Cane Technologists, 3-6 May 2005, Bundaberg, QLD, Australia.

Sheehan, Madoc, Britton, Paul, and Wong, Jia Yi (2005) Investigation of crystal abrasion and dust generation in a spouted fluidised bed dryer. In: Proceedings of the 2005 Conference of the Australian Society of Sugar Cane Technologists (27), pp. 411-422. From: 27th Annual Conference Australian Society of Sugar Cane Technologists, 3-6 May 2005, Bundaberg, QLD, Australia.

Abbosh, A.M., Bialkowski, M.E., Jacob, M.V., and Mazierska, J. (2005) Investigations into an LTCC based ultra wideband antenna. In: Proceedings of Asia Pacific Microwave Conference 2005, pp. 1525-1528. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Lin, Wenxian, and Armfield, SW (2005) Long-term behaviour of cooling fluid in a vertical cylinder. International Journal of Heat and Mass Transfer, 48. pp. 53-66.

Mazierska, Janina, Jacob, Mohan V., Ledenyov, Dimitri, and Krupka, Jerzy (2005) Loss tangent measurements of dielectic substrates from 15K to 300K with two resonators: investigation into accuracy issues. In: Proceedings of Asia Pacific Microwave Conference 2005, pp. 2370-2373. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2005) Low temperature complex permittivity of MgF2 at microwave frequencies from TE01δ Modes. In: Proceedings of Asia Pacific Microwave Conference 2005, pp. 3455-3458. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Jacob, Mohan V. (2005) Low temperature microwave characterisation of lithium fluoride at different frequencies. Science and Technology of Advanced Materials, 6 (8). 944- 949.

Jacob, Mohan V., Mazierska, Janina, and Bialkowski, Marek (2005) Measurement of complex permittivity of low temperature co-fired ceramic at cryogenic temperatures. In: Proceedings of the 29th International Conference on Advanced Ceramics and Composites (26), pp. 209-216. From: 29th International Conference on Advanced Ceramics and Composites, 23-28 January 2005, Florida, USA.

Cole, D.E., and Liow, J.V. (2005) Microbubble formation and entrapment from liquid-liquid impacts. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Jacob, Mohan V., Mazierska, Janina, and Krupka, J. (2005) Microwave characterisation of calcium fluoride in the temperature range 15-300 K. In: Proceedings of the 29th International Conference on Advanced Ceramics and Composites (26), pp. 161-168. From: 29th International Conference on Advanced Ceramics and Composites, 23-28 January 2005, Florida, USA.

Liow, J.V., and Cole, D.E. (2005) Modelling the mixing in an elliptic top submerged gas injected vessel. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Rankine, B., Sivakugan, N., and Wijeyakulasuriya, V. (2005) Observed and predicted behaviour of clay foundation response under the Sunshine Motorway trial embankment. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2), pp. 951-954. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Jafari, Seid, Bhandari, Bhesh, and He, Yinghe (2005) Optimization of nano-emulsion production by sonication and microfluidization. In: Proceedings of 33rd Australasian Chemical Engineering Conference, pp. 1-6. From: Chemeca 2005 33rd Australasian Chemical Engineering Conference, 25-28 September 2005, Brisbane, QLD, Australia.

Dombrowski, Richard D., Wagner, Norman J., He, Yinghe, and Litster, James D. (2005) Particle production in monodisperse emulsions. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Mazierska, Janina, Krupka, Jerzy, and Jacob, Mohan V. (2005) Precise microwave characterisation of low loss dielectrics. In: Papers from Microwave Workshops and Exhibition MWE2005, pp. 295-300. From: Microwave Workshops and Exhibition MWE2005, 9 -11 November 2005, Yokohama, Japan.

Rankine, Rudd M., and Sivakugan, Nagaratnam (2005) Prediction of paste backfill performance using artificial neural networks. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2), pp. 1107-1110. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Porter, Adam, Jegatheesan, Veeriah, and Narayan, Kumar (2005) Pumping optimisation of the lower Burdekin delta aquifer using an analytical model of seawater intrusion. In: Papers from the Ozwater Specialist Conference, pp. 1-8. From: Ozwater Specialist Conference, 5 - 7 May, 2005, Townsville, QLD, Australia.

Griffin, G.J. (2005) Purification and concentration of xylose and glucose from neutralized bagasse hydrolysates using 3,5-dimethylphenylboronic acid and modified aliquat 336 as coextractants. Separation Science and Technology, 40 (11). pp. 2337-2351.

Zhou, Shouqin, and Peng, Zhongxiao (2005) A RFID based visible information flow for enterprise internal production management over the internet. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing, pp. 280-285. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Willis, Simon L., and Kikkert, Cornelis J. (2005) Radio propagation model for long-range Ad-hoc wireless sensor network. In: Proceedings of the 2005 International Conference on Wireless Networks, Communications and Mobile Computing (1), pp. 1-6. From: 2005 International Conference on Wireless Networks, Communications and Mobile Computing, 13 - 16 June 2005, Maui, Hawaii.

Ginger, J.D., and Henderson, D.J. (2005) Reliability of metal-clad, low-rise, low-pitch roofs subjected to wind loads. In: Proceedings of Australian Structural Engineering Conference 2005, pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Lin, Wenxian, and Armfield, SW (2005) Scaling laws for unsteady natural convection cooling of fluid with Prandtl number less than one in a vertical cylinder. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 72 (1). 016306.

Karunasena, W., and Anderson, W.C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: Proceedings of 4th Australian Congress on Applied Mechanics, pp. 561-566. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2005) Utilization of two-dimensional fast Fourier transform and power spectral analysis for assessment of early degeneration of articular cartilage. Journal of Musculoskeletal Research, 9 (3). pp. 119-131.

Lei, C., Xu, F., and Patterson, J.C. (2005) Visualisation of natural convection in an isosceles triangular enclosure heated from below. In: Proceedings of the 5th Pacific Symposium on Flow Visualisation and Image Processing, pp. 1-8. From: 5th Pacific Symposium on Flow Visualisation and Image Processing, 27 - 29 September 2005, Daydream Island, QLD, Australia.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribology International, 38 (2). pp. 129-143.

Lee, A., Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A comparison of compartment models for solids transport in flighted rotary dryers. In: Proceedings of the 33rd Australasian Chemical Engineering Conference, pp. 1-6. From: 33rd Australasian Chemical Engineering Conference, 25 - 28 September 2005, Sydney, NSW, Australia.

Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics, pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The study of sliding and rolling wear using wear debris analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials, pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Peng, Z., Kessissoglou, N.J., and Cox, M. (2005) A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 258 (11-12). pp. 1651-1662.

Peng, Z., Green, A., and Yuan, C. (2005) The study of wear in a spur gear using wear debris and vibration analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials, pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Duan, M. (2004) An efficient hybrid/mixed element for geometrically non linear analysis of plate and shell structures. Computational Mechanics, 35 (1). pp. 72-84.

Yeow, Y. Leong, Pradhana, Stephanus I., Tan, Heather C.L., and Leong, Yee-Kwong (2004) Applying Tikhonov regularization to process the kinetic data of polymerization. Journal of Applied Polymer Science, 94 (4). pp. 1625-1633.

Mathan, M. Bobby, Raja, V.S., and Mukhopadhyay, A.K. (2004) Determination of true stress corrosion cracking susceptibility index of a high strength Al alloy using glycerin as the non-corrosive atmosphere. Scripta Materialia, 51 (11). pp. 1075-1079.

Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2004) Effects of temperature on sliding wear process under contaminated lubricant test conditions. Wear, 257 (7-8). pp. 812-822.

McConochie, Jason D., Hardy, Thomas A., and Mason, Luciano B. (2004) Modelling tropical cyclone over-water wind and pressure fields. Ocean engineering, 31 (14-15). pp. 1757-1782.

Wadhwa, Lal C. (2004) Achieving sustainability through integrated transport and land use planning in the three largest Australian cities. In: Proceedings of the 27th Australasian Transport Research Forum, pp. 1-10. From: 27th Australasian Transport Research Forum, 29 September - 1 October 2004, Adelaide, SA, Australia.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part I: experimental investigation. Biomaterials, 25 (20). pp. 4987-4993.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part II: numerical investigation. Biomaterials, 25 (20). pp. 4995-5001.

Singj, Raj Mohan, and Datta, Bithin (2004) Groundwater pollution source identification and simultaneous parameter estimation using pattern matching by artificial neural network. Enviromental Forensics, 5. pp. 143-153.

Hardy, Tom, Mason, Luciano, McConochie, Jason, and Bode, Lance (2004) Modeling suspended sediment during construction in Great Barrier Reef world heritage area. Journal of Environmental Engineering, 130 (9). pp. 1021-1031.

Sivakugan, N., and Johnson, K. (2004) Settlement predictions in granular soils: a probabilistic approach. Géotechnique, 54 (7). pp. 499-502.

Yeow, Y. Leong, Leong, Yee-Kwong, Cheah, Mee Yean, Dang, Huong D. T., and Law, Connie K. P. (2004) Cleaving of S-mandelonitrile catalyzed by S-hydroxynitrile lyase from Hevea brasiliensis - a kinetic investigation based on the rate curve method. Journal of Biotechnology, 111 (1). pp. 31-39.

Zhou, S.Q., Zhao, A.P., Chin, K.S., Yarlagadda, P.K.D.V., and Peng, Z. (2004) A solution for knowledge resources provider over the internet. International Journal of Advanced Manufacturing Technology, 24 (1). pp. 148-160.

Mazierska, Janina, Krupka, Jerzy, Jacob, Mohan V., and Ledenyov, Dimitri (2004) Complex permittivity measurements at viable temperatures of low loss dielectric substrates employing split post and single post dielectric resonators. In: Proceedings of 2004 IEEE MTT-S International Microwave Symposium Digest (3), pp. 1825-1828. From: 2004 International Microwave Symposium, 6 -11 June 2004, Fort Worth, Texas, USA.

Kikkert, Cornelis J., and Fitch, Peter (2004) A low cost multifrequency landmine detector. In: Proceedings of URSI Commission F Triennium Open Symposium 2004, pp. 1-9. From: URSI Commission F Triennium Open Symposium 2004, 1-4 June 2004, Cairns, QLD, Australia.

Jegatheesan, Veeriah, Kastl, George, Fisher, Ian, Chandy, Joseph, and Angles, Mark (2004) Modelling bacterial growth in drinking water: effect of nutrients. American Water Works Association, 96 (5). pp. 129-141.

Griffin, Gregory John, and Shu, Li (2004) Solvent extraction and purification of sugars from hemicellulose hydrolysates using boronic acid carriers. Journal of Chemical Technology and Biotechnology, 79 (5). pp. 505-511.

Krupka, Jerzy, Mazierska, Janina E., Jacob, Mohan V., Hartnett, John G., and Tobar, Michael E. (2004) Recent advances in measurements of permittivity and dielectric losses at microwave frequencies. In: Proceedings of SPIE - the International Society of Optical Engineering (5445), pp. 311-317. From: Microwave and Optical Technology 2003, 11-15 August 2003, Ostrava, Czech Republic.

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2004) An analytical investigation of single actuator and error sensor control in connected plates. Journal of Sound and Vibration, 271 (3-5). pp. 635-649.

Kessissoglou, Nicole J. (2004) Power transmission in L-shaped plates including flexural and in-plane vibration. Journal of the Acoustical Society of America, 115 (3). pp. 1157-1169.

Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2004) A cryogenic post dielectric resonator for precise microwave characterization of planar dielectric materials for superconducting circuits. Superconductor Science & Technology, 17 (3). pp. 358-362.

Rankine, B.R., Sivakugan, N., and Messer, T.R. (2004) Anisotropy of consolidation parameters in artifically sedimented clays. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics (2), pp. 717-723. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Rankine, R., and Sivakugan, N. (2004) Backfilling of underground mines with paste. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics, pp. 225-231. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Rankine, K.J., Sivakugan, N., and Rankine, K.S. (2004) Laboratory tests for mine fills and barricade bricks. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics (1), pp. 218-224. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Yeow, Y.Leong, and Leong, Yee-Kwong (2004) Shear rate and wall slip velocity functions of polyvinyl chloride melts based on slit die viscometry data. Polymer Engineering and Science, 44 (1). pp. 153-162.

Yeow, Y.L., Wickramasinghe, S.R., Han, B.B., and Leong, Y.K. (2004) Applying Tikhonov regularization to the time-concentration data of reaction kinetics. In: Proceedings of the 16th International Congress of Chemical and Process Engineering, pp. 1-10. From: 16th International Congress of Chemical and Process Engineering, 22 - 26 August 2004, Prague, Czech Republic.

Schneider, P.A., and Vigh, S.N. (2004) Batch pan control by microwave brix. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Cole, D.E., and Liow, J.V. (2004) Bubble entrapment during water drop impacts. In: Proceedings of the 15th Australasian Fluid Mechanics Conference. From: 15th Australasian Fluid Mechanics Conference, 13 - 17 December 2004, Sydney, NSW, Australia.

Pennisi, S. N., Liow, J.-L., and Schneider, P. A. (2004) CFD model development for a final effect evaporator. In: Proceedings of the Australian Society of Sugar Cane Technologists 2004 - Twenty-sixth Conference Brisbane 2004 (26). From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Leong, Yee-Kwong, and Ong, Ban-Choon (2004) Characterising the flocculated-dispersed state transition. Journal of Chemical Engineering of Japan, 37 (2). pp. 187-193.

Wadhwa, Lal C., and Bancroft, Michael D. (2004) Comfort level of cyclists at roundabouts. In: Proceedings of the 2004 Road Safety Research, Policing and Education Conference, pp. 1-13. From: Road Safety Research, Policing and Education Conference, 14 - 16 November 2004, Perth, WA, Australia.

Loughran, J.G., Leonardi, C.R., and Anderson, S. (2004) DEM of bulk flow through complex transitions. In: Proceedings of the 8th International Conference on Bulk Materials Storge, Handling and Transportation, pp. 1-5. From: 8th International Conference on Bulk Materials Storage, Handling and Transportation, 5-8 July 2004, University of Wollongong.

Liow, J.V., and Cole, D.E. (2004) Drop formation in T-junction microchannels. In: Proceedings of 32nd Australasian Chemical Engineering Conference. From: 32nd Australasian Chemical Engineering Conference, 26-29 September 2004, Sydney, NSW, Australia.

Ali, M.I., Schneider, P.A., and Hudson, N. (2004) Dynamic modelling and simulation of nutrient recovery from piggery effluent. In: Proceedings of International Conference on Wastewater Treatment for Nutrient Removal and Reuse 2004 (1), pp. 295-302. From: International Conference on Wastewater Treatment for Nutrient Removal and Reuse 2004, 26 - 29 January 2004, Bangkok, Thailand.

Kikkert, Cornelis J. (2004) Dynamic range improvements of a beacon receiver using DSP techniques. In: Proceedings of URSI Commission F Triennium Open Symposium 2004, pp. 1-8. From: URSI Commission F Triennium Open Symposium 2004, 1-4 June 2004, Cairns, QLD, Australia.

Hughes, W.D., and Karunasena, W.M. (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: Proceedings of the 3rd International Conference on Advances in Structural Engineering and Mechanics, pp. 871-880. From: 3rd International Conference on Advances in Structural Engineering and Mechanics, 2-4 Sep 2004, Seoul, Korea.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2004) Flight unloading in rotary sugar dryers. In: Proceedings fo the 26th Australian Sugar Cane Technologists Conference (26), pp. 1-7. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Lei, Chengwang, Patterson, John C., and Sha, Yong (2004) Flow response to periodic heating and cooling in a reservoir. In: Proceedings of the 15th Australasian Fluid Mechanics Conference. From: 15th Australasian Fluid Mechanics Conference, 13 - 17 December 2004, Sydney, NSW, Australia.

Zahedi, Ahmad (2004) Fundamentals Of Electrical And Electronic Design. New World Publishing, Melbourne, VIC, Australia.

Piel, H., Aminov, B., Chaloupka, H., Getta, M., Kolesov, S., Wehler, D., Mazierska, J., Sinclair, M., Knack, A., and Jacob, M.V. (2004) High temperature superconducting elliptic filters for UMTS Cryogenic Receiver. In: Proceedings of Asia Pacific Microwave Conference 2004, pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Mazierska, Janina, and Jacob, Mohan (2004) High temperature superconducting planar filters for wireless communication. In: Kiang, Jean-Fu, (ed.) Novel Technologies for Microwave and Millimeter-Wave Applications. Kluwer Academic Publishers, Boston, USA, pp. 123-151.

Jacob, Mohan V., Mazierska, Janina, and Takeuchi, Seiichi (2004) Investigations on microwave characteristics of MgF2 at cryogenic temperatures. In: Proceedings of TENCON 2004 Conference (3), pp. 558-561. From: TENCON 2004 IEEE Region 10 Conference, 21 - 24 November 2004, Chiang Mai, Thailand.

Loughran, J.G., and Anderson, S. (2004) Large strain deformation and fracture of quai-brittle materials with application to process comminution equipment. In: Proceedings of the 6th World Congress on Computational Mechanics, pp. 1-9. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Jacob, Mohan V. (2004) Low temperature microwave characterisation of lithium fluoride. In: Proceedings of Asia Pacific Microwave Conference 2004, pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Ledenyov, Dimitri, Mazierska, Janina, Allen, Greg, and Jacob, Mohan (2004) Lumped element modeling of nonlinear properties of high temperature superconductors in a dielectric resonator. In: Proceedings of the 15th International Conference on Microwaves, Radar and Wireless Communications 2004 (3), pp. 824-827. From: 15th International Conference on Microwaves, Radar and Wireless Communications 2004, 17-19 May 2004, Warszava, Poland.

Jacob, M.V., Mazierska, J., and Krupka, J. (2004) Microwave characterization of (La, Sr)(Ai,Ta)O3 using TE011 mode dielectric resonator. Transactions of the Materials Research Society of Japan, 29 (4). pp. 1093-1096.

Jacob, Mohan V., Mazierska, Janina, Knack, Adrian, and Takeuchi, Seiichi (2004) Miniaturized 10-pole superconducting filter on MgO substrate for mobile communication. In: Proceedings of TENCON 2004 Conference (3), pp. 554-557. From: TENCON 2004 IEEE Region 10 Conference, 21 - 24 November 2004, Chiang Mai, Thailand.

Adam, C.J., and Loughran, J.G. (2004) Multi-variate analysis of frictional interaction between grooved rollers and prepared sugarcane. Transactions of the ASABE, 47 (5). pp. 1611-1618.

Jacob, M.V., Mazierska, J., and Knack, A. (2004) Narrowband superconducting filters for mobile communication. Transactions of the Materials Research Society of Japan, 29 (4). pp. 1273-1276.

Karunasena, W.M. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: Proceedings of Structural Integrity and Fracture Conference 2004, pp. 181-187. From: Structural Integrity and Fracture, 26-29 September 2004, Brisbane, QLD, Australia.

Mazierska, Janina, Jacob, Mohan V., and Krupka, Jerzy (2004) Precise microwave characterisation of materials for emerging technologies. In: Proceedings of Asia Pacific Microwave Conference 2004, pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Mazierska, Janina, Jacob, Mohan V., and Krupka, Jerzy (2004) Precise microwave characterization of lanthanum aluminate and LSAT substrates for HTS circuits with superconducting post dielectric resonator. In: Proceedings of the 6th European Conference on Applied Superconductivity , pp. 2708-2715. From: 6th European Conference on Applied Superconductivity , 14-18 September 2003, Sorrento, Italy.

Adam, Clayton J., and Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurement for fibro-porous media - a finite element investigation. Journal of Porous Media, 7 (2). pp. 101-117.

Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Lee, A., Sheehan, M.E., and Schneider, P.A. (2004) Solids transport in rotary sugar dryers. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th, pp. 1-8. From: 26th Annual Conference Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Duan, Mei (2004) Splitting behaviour analysis of steel cladding systems. Key Engineering Materials, 274-276. pp. 151-156.

Mazierska, Janina (2004) Superconducting cryogenic front end receivers. In: Proceedings of the MIKON 2004 - 15th International Conference on Microwaves, Radar and Wireless Communications (1), pp. 351-354. From: MIKON 2004 - 15th International Conference on Microwaves, Radar and Wireless Communications , 17-19 May 2004, Warszawa, Poland.

Jacob, Mohan. V., Hartnett, John G., Mazierska, Janina, Giordano, Vincent, Krupka, Jerzy, and Tobar, Michael E. (2004) Temperature dependence of permittivity and loss tangent of Lithium Tantalate at microwave frequencies. IEEE Transactions on Microwave Theory and Techniques, 52 (2). pp. 536-541.

Hartley, J.A., Leong, Y.K., and Nott, M.C. (2004) Yield stress of phosphate rock slurries for gravity thickening. In: Proceedings of Chemeca 2004 the 32nd Australasian Chemical Engineering Conference. From: Chemeca 2004 the 32nd Australasian Chemical Engineering Conference, 26 - 29 September 2004, Sydney, NSW, Australia.

Duan, Mei, and Loughran, Jeffrey G. (2004) A constitutive modelling analysis for deformation of prepared sugar cane. Key Engineering Materials, 274-276. pp. 271-276.

Kessissoglou, Nicole J., and Keir, John (2004) A hybrid approach to predict the vibration transmission in ship structures using a waveguide method and statistical energy analysis. In: Proceedings of 2004 Annual Conference of the Australian Acoustical Society, pp. 587-592. From: 2004 Annual Conference of the Australian Acoustical Society, 3-5 November 2004, Gold Coast, QLD, Australia.

Ginger, J.D., and Holmes, J.D. (2003) Effect of building length on wind loads on low-rise buildings with a steep roof pitch. Journal of Wind Engineering and Industrial Aerodynamics, 91 (11). pp. 1377-1400.

Mazierska, Janina, McGrath, Jonathon, and Jacob, Mohan V. (2003) Optimisation of Hakki-Coleman dielectric resonators for precise microwave characterisation of low loss low permittivity dielectrics. In: Proceedings of APMC 2003, pp. 925-928. From: APMC 2003 Asia-Pacific Microwave Conference, 4-7 November 2003, Seoul, Korea.

Mazierska, J., and Liu, J.Z.M. (2003) Computations of unloaded Q0-Factor and resonant frequency of the TE011 mode Hakki–Coleman dielectric resonators with coupling structures using ANSOFT HFSS. Journal of Superconductivity, 16 (5). pp. 843-855.

Leong, Y.K., and Ong, B.C. (2003) Critical zeta potential and the Hamaker Constant of oxides in water. Powder Technology, 134 (3). pp. 249-254.

de Silva Samarasinghe, J.R., Bode, L., and Mason, L.B. (2003) Modelled response of Gulf St Vincent (South Australia) to evaporation, heating and winds. Continental Shelf Research, 23 (14). pp. 1285-1313.

Rankine, K.J., Rankine, K.S., and Sivakugan, N. (2003) Three dimensional drainage modelling of hydraulic fill mines. In: Proceedings of 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, pp. 937-940. From: 12th Asian Regional Conference on Soil Mechanics & Geotechnical Engineering, 4-8 August 2003, Singapore.

Yeow, Y. Leong, Wickramasinghe, S. Ranil, Han, Binbing, and Leong, Yee-Kwong (2003) A new method of processing the time-concentration data of reaction kinetics. Chemical Engineering Science, 58 (16). pp. 3601-3610.

Yuan, C.Q., Li, J., Yan, X.P., and Peng, Z. (2003) The use of the fractal description to characterize engineering surfaces and wear particles. Wear, 255 (1-6). pp. 315-326.

Burrage, D.M., Steinberg, C.R., Mason, L.B., and Bode, L. (2003) Tidal corrections for TOPEX altimetry in the Coral Sea and Great Barrier Reef Lagoon: comparisons with long-term tide gauge records. Journal of Geophysical Research: oceans, 108 (C7). 34-1.

Leong, Y.K., and Yeow, Y.L. (2003) Obtaining the shear stress shear rate relationship and yield stress of liquid foods from Couette viscometry data. Rheologica Acta, 42 (4). pp. 365-371.

Jacob, Mohan V., Mazierska, Janina, Leong, Kenneth, Ledenyov, Dimitri, and Krupka, Jerzy (2003) Surface resistance measurements of HTS thin films using SLAO dielectric resonator. IEEE Transactions on Applied Superconductivity, 13 (2). pp. 2909-2912.

Hardy, Thomas A., McConochie, Jason D., and Mason, Luciano B. (2003) Modelling tropical cyclone wave population of the Great Barrier Reef. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 129 (3). pp. 104-113.

Jacob, Mohan V., and Mazierska, Janina (2003) Precise microwave characterisation of YBa2Cu3O7−δ films on sapphire and lanthanum aluminate substrates. Journal of Low Temperature Physics, 131 (3-4). pp. 647-651.

Cox, Peter, Fisher, Ian, Kastl, George, Jegatheesan, Veeriah, Warnecke, Malcolm, Angles, Mark, Bustamante, Heri, Chiffings, Tony, and Hawkins, Peter R. (2003) Sydney 1998: lessons from a drinking water crisis. Journal American Water Works Association, 95 (5). pp. 147-161.

Halide, Halmar, Ridd, Peter V., Peterson, Eric L., and Foster, David (2003) Assessing sediment removal capacity of vegetated and non-vegetated settling ponds in prawn farms. Aquacultural Engineering, 27 (4). pp. 295-314.

Lei, Chengwang, and Patterson, John C. (2003) A direct stability analysis of a radiation-induced natural convection boundary layer in a shallow wedge. Journal of Fluid Mechanics, 480. pp. 161-184.

Jacob, Mohan V., Mazierska, Janina, and Lorenz, Michael (2003) Surface resistance measurements of surface and interface sides of YBa2Cu3O7 films on sapphire and LaAlO3. Superconductor Science & Technology, 16 (3). pp. 412-415.

Leong, Y.K., Ong, B.C., Tan, J.H., Chandramalar, A.V.M., and Lim, Y.Y. (2003) Surface forces arising from adsorbed ionic copolymers with hydrophobic and hydrophilic segments in colloidal dispersions. Journal of Rheology, 47 (1). pp. 59-69.

Tso, Yan, Kessissoglou, Nicole, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 1: dynamics of the physical system. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII), pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

Kessissoglou, Nicole, Tso, Yan, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 2: active modal control. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII), pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

Messer, Tracey, and Jegatheesan, Veeriah (2003) Application of floating medium filters for aquaculture wastewater treatment. In: Proceedings of the Ozwater Convention & Exhibition 2003. From: Ozwater Convention & Exhibition 2003, 6-10 April 2003, Perth, WA, Australia.

Jegatheesan, V., and Shu, L. (2003) Application of novel technologies in water reclamation, reuse and recycle. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Waterqual 2003 IWA-Asia Pacific Regional Conference, 19-23 October 2003, Bangkok, Thailand.

Hardeo, P., and Karunasena, W. (2003) Buckling of fibre-reinforced plywood plates. In: Proceedings of Second International Conference on Structural Stability and Dynamics (1), pp. 442-447. From: Second International Conference on Structural Stability and Dynamics, 16-18 December 2002, Singapore.

Pennisi, Steven N., Liow, Jong-Leng, and Schneider, Philip A. (2003) CFD model development for sugar mill evaporators. In: Proceedings of the 3rd International Conference on CFD in the Minerals and Process Industries, pp. 105-110. From: 3rd International Conference on CFD in the Minerals and Process Industries, 10-12 December 2003, Melbourne, VIC, Australia.

Sheehan, M.E., and Schneider, P.A. (2003) Characterisation of spouted fluidisation of raw sugar. In: Proceedings of the 25th Australian Society of Sugar Cane Technologists Conference (25), pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Streeter, Megan, Jegatheesan, Veeriah, and Fracchia, Henry (2003) Chlorine decay and biofilm growth in tropical drinking water distribution system - a case study for Townsville. In: Papers from OzWater, AWA 20th Convention, pp. 1-17. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Wadhwa, Lal C. (2003) Comfort level of cyclists at intersections. In: Proceedings of the 26th Australasian Transport Research Forum 2003. From: 26th Australasian Transport Research Forum 2003, 1-3 October 2003, Wellington, New Zealand.

Matheson, Michael, Hardy, Tom, and Kapitzke, Ross (2003) Designing mooring systems for tourist pontoons in coral reef environments. In: Proceedings of the Coasts & Ports Australasian Conference 2003, pp. 1-8. From: Coasts & Ports Australasian Conference 2003, 9-12 September, 2003, Auckland, New Zealand.

Fabian, Cesimiro, Ridd, Michael, Ness, Sharon, Lancaster, Thomas, and Griffin, Gregory (2003) Determination of crystallite size and surface roughness of copper deposits for electrowinning in the presence of an organic additive. In: Hydrometallurgy 2003: Proceedings of the Fifth International Conference in Honor of Professor Ian Ritchie: Electrometallurgy and Environmental Hydrometallurgy (2), pp. 1233-1245. From: Hydrometallurgy 2003 Fifth International Conference in Honor of Professor Ian Ritchie, 24-27 August 2003, Vancouver, BC, Canada.

Phan, Cu, Holgate, Daniel L., and Griffin, Gregory J. (2003) Determination of the Nusselt versus Graetz correlation for heat transfer in channels of sinusoidal cross-section. Korean Journal of Chemical Engineering, 20 (6). pp. 1012-1016.

Jegatheesan, V., Shu, L., Streeter, M., and Fracchia, H. (2003) Efficient management of drinking water distribution systems through the application of water quality modelling. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference, - . From: Asian Waterqual 2003 IWA-Asia Pacific Regional Conference, 19-23 October 23, Bangkok, Thailand.

Liow, Jong-Leng, Juusela, Mikko, Gray, N.B., and Sutalo, I.D. (2003) Entrainment of a two-layer liquid through a taphole. Metallurgical and Materials Transactions B, 34 (6). pp. 821-832.

Schneider, P.A. (2003) Evaluation of an alternative vacuum pan control scheme. In: Proceedings of the 25th Australian Society of Sugar Cane Technologists Conference (25), pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Loughran, J.G., Anderson, S., and Owen, D.R.J. (2003) Explicit predictive technology for modelling of the evolution of damage in ore passes. In: Proceedings of the 1st Australasian Ground Control in Mining Conference, pp. 95-102. From: Ground Control in Mining: Technology and Practice, 10-13 November 2003, Sydney, NSW, Australia.

Duan, M. (2003) Finite element analysis of a laminated timber bridge. In: Poceedings of the 10th Asia-Pacific Vibration Conference (1), pp. 104-108. From: 10th Asia Pacific Vibration Conference, 12-14 November 2003, Gold Coast, QLD, Australia.

Kapitzke, Ross (2003) From vision to reality: the crucial role of environmental engineers in achieving sustainability. In: Proceedings of the National Environment Conference 2003, pp. 1-6. From: National Environment Conference 2003, 18-20 June 2003, Brisbane, QLD, Australia.

Kauppila, D.J., Britton, P.F., Kent, G., and Loughran, J.G. (2003) Grooving and its effect on bagasse moisture content. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists, pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Peng, Z., and Kessissoglou, N. (2003) Integration of wear debris and vibration analysis for machine condition monitoring. In: Proceedings of International Conference on Intelligent Maintenance Systems, pp. 23-30. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Mason, Luciano B., Hardy, Thomas A., and Bailey, Wesley G. (2003) Issues in development of a langrangian transport model. In: Proceedings of the Coasts & Ports Australasian Conference 2003, pp. 1-9. From: Coasts & Ports Australasian Conference 2003, 9-12 September, 2003, Auckland, New Zealand.

Bhargava, Atul, and Griffin, Gregory J. (2003) Kinetics of degradation reactions within intumescent and subliming fire retardant coatings. Journal of Fire Sciences, 21 (3). pp. 173-188.

Jacob, M.V., Hartnett, J.G., Mazierska, J., Krupka, J., and Tobar, M.E. (2003) Lithium tantalate - a high permittivity dielectric material for microwave communication systems. In: Proceedings of Tencon 2003: conference on convergent technologies for Asia-Pacific Region. From: Tencon 2003: conference on convergent technologies for Asia-Pacific Region, 15-17 October 2003, Bangalore, India.

Wadhwa, Lal (2003) Low cost infrastructure solutions for bicycle safety. In: Proceedings of 21st ARRB and 11th REAA Conference, pp. 1-9. From: 21st ARRB and 11th REAAA Conference, 18-23 May 2003, Cairns, QLD, Australia.

Jegatheesan, V., and Vigneswaran, S. (2003) Mathematical modelling of deep bed filtration. In: Proceedings of MODSIM 2003 International Congress on Modelling and Simulation (4), pp. 1805-1810. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

Mazierska, Janina, Jacob, Mohan V., Harring, Andrew, Krupka, Jerzy, Barnwell, Peter, and Sims, Theresa (2003) Measurements of loss tangent and relative permittivity of LTCC ceramics at varying temperatures and frequencies. Journal of the European Ceramic Society, 23 (14). pp. 2611-2615.

Britton, P.F., and Loughran, J.G. (2003) Measuring local bagasse deformation with a customised image measurement technique. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists, pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Jacob, Mohan V., Mazierska, Janina, Ledenyov, Dmitri, and Krupka, Jerzy (2003) Microwave characterisation of CaF2 at cryogenic temperatures using a dielectric resonator technique. Journal of the European Ceramic Society, 23 (14). pp. 2617-2622.

Jacob, Mohan V., Mazierska, Janina, Krupka, Jerzy, Ledenyov, Dimitri, and Takeuchi, Seiichi (2003) Microwave properties of Yttrium Vanadate crystals at cryogenic temperatures. In: Proceedings of Symposium F: Electromagnetic Materials, pp. 232-235. From: ICMAT 2003 International Conference on Materials for Advanced Technologies, 7-12 December 2003, Singapore.

Jacob, Mohan V., Mazierska, Janina, and Takeuchi, Seiichi. (2003) Miniaturized superconducting filter for mobile communications. In: IEEE TENCON - Convergent Technologies for the Asia Pacific Region (2), pp. 631-634. From: IEEE TENCON 2003 Conference on Convergent Technologies for the Asia-Pacific Region, 15-17 October 2003, Bangalore, India.

Schneider, P.A., Sheehan, M.E., and Brown, S.T. (2003) Modelling the dynamics of solids transport in flighted rotary dryers. Computer Aided Chemical Engineering, 14. pp. 911-916.

Carthew, Matthew, Jegatheesan, Veeriah, and Fracchia, Henry (2003) Network modelling for Townsville distribution system. In: Papers from OzWater, AWA 20th Convention, pp. 1-15. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Zheng, D.Y., and Kessissoglou, N.J. (2003) On the derivation of element stiffness matrix of a cracked beam-column element. In: Proceedings ofthe 5th Asia-Pacific Structural Engineering and Construction Conference APSEC 2003, pp. 253-259. From: The 5th Asia-Pacific Structural Engineering & Construction Conference (APSEC 2003), 26-28 Aug 2003, Johor, Malaysia.

Shu, L., Waite, T.D., Bliss, P.J., Pailthorpe, M.T., and Jegatheesan, V. (2003) Possible changes of pore sizes during nanofiltration. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Watrequal 2003 IWA-Asia Pacific Regional Conference, 19-23 October 2003, Bangkok, Thailand.

Kauppila, D.J., Kent, G., and Loughran, J.G. (2003) Preliminary experimental studies into the flow of juice in roller groove conduits. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists (2003), pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Rankine, K.J., Rankine, K.S., and Sivakugan, N. (2003) Quantitative validation of scaled modelling of hydraulic mine drainage using numerical modelling. In: Proceedings of the MODSIM 2003 International Congress on Modelling and Simulation, pp. 2054-2059. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia .

Shu, L., Waite, T.D., Bliss, P.J., Pailthorpe, M.T., and Jegatheesan, V. (2003) Reclaiming spent liquor from cotton reactive dyebaths using nanofiltration membrane for possible reuse of water and salt. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Watrequal 2003 IWA-Asia Pacific reginal Conference, 19-23 October 2003, Bangkok, Thailand.

Johnson, K., Christensen, M., Sivakugan, S., and Karunasena, W. (2003) Simulating the response of shallow foundations using finite element modelling. In: Proceedings of the MODSIM 2003 International Congress on Modelling and Simulation, pp. 2060-2065. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

Wadhwa, Lal C. (2003) Surface transport capacity at a port: case of a coal export terminal. In: Proceedings of the 16th Australasian Coastal and Ocean Engineering Conference 2003, pp. 1-9. From: Coastal Development - A Quest for Excellence, 9-12 September 2003, Auckland, New Zealand.

Jegatheesan, V., and Manicom, C. (2003) Sustainable aquaculture through water recycling. In: Proceedings of the First International Symposium on Southeast Asian Water Environment. From: First International Symposium on Southeast Asian Water Environment, 23-25 October 2003, Bangkok, Thailand.

Mazierska, J., Jacob, M.V., and Au Yeung, T.F. (2003) Temperature dependence of relative permittivity and loss tangent of novel transparent substrate material at microwave frequencies. In: Proceedings of the International Conference on Materials for Advanced Technologies, pp. 224-227. From: International Conference on Materials for Advanced Technologies , 7-12 December 2003, Singapore.

Lei, Chengwang, Patterson, John C., and Farrow, Duncan E. (2003) Thermal layer instability in a shallow wedge subject to solar radiation. In: Proceedings of the Second International Conference on Computational Fluid Dynamics. From: Second International Conference on Computational Fluid Dynamics, 15-19 July 2002, Sydney, NSW, Australia.

Wadhwa, L.C., and Wirasinghe, S.C. (2003) True cost of road travel. In: Sucharov, L.J., and Brebbia, C.A., (eds.) Urban Transport IX: urban transport and the environment in the 21st century. WIT Press, Southhampton, UK, pp. 525-534.

Jegatheesan, V., Kastl, G., Fisher, I., Chandy, J., and Angles, M. (2003) Water quality modelling for drinking water distribution systems. In: Proceedings of MODSIM 2003 International Congress on Modelling and Simulation (1), pp. 332-337. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

Maskell, Douglas L., and Woods, Graham S. (2003) An adaptive subsample delay estimator using a quadrature demodulator. In: Proceedings of the Joint 4th International Conference on Information Communications and Signal Processing, 2003 and 4th Pacific Rim Conference on Multimedia (3), pp. 1-4. From: Joint ACICS-PCM 2003, 15-18 December 2003, Singapore.

Kessissoglou, Nicole J., Ragnarsson, Patrick, and Löfgren, Anders (2003) An analytical and experimental comparison of optimal actuator and error sensor location for vibration attenuation. Journal of Sound and Vibration, 260 (4). pp. 671-691.

Peng, Z., and Thetford, A. (2003) The development of an expert system to monitor the condition of gearboxes using wear debris analysis techniques. In: Proceedings of International Conference on Intelligent Maintenance Systems, pp. 182-189. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Kessissoglou, N. (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear, 255 (7-12). pp. 1221-1232.

Poletto, Andrew, Jegatheesan, Veeriah, and Wulf, Chris (2003) The water management in Bohle quarry. In: Papers from OzWater, AWA 20th Convention, pp. 1-12. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Barra, M., Cassinese, A., Cirillo, M., Jacob, M.V., Russo, R., and Vaglio, R. (2002) Miniaturized hairpin superconducting filters for telecommunications applications. Microwave & Optical Technology Letters, 35 (5). pp. 360-362.

James, Maurice K., Armsworth, Paul R., Mason, Luciano B., and Bode, Lance (2002) The structure of reef fish metapopulations: modelling larval dispersal and retention patterns. Proceedings of the Royal Society of London Series B, Biological Sciences, 269. pp. 2079-2086.

Sanderson, Brian, and Brassington, Gary (2002) Fourth- and fifth-order finite-difference methods applied to a control-volume ocean model. Journal of Atmospheric and Oceanic Technology, 19 (9). pp. 1424-1441.

Jacob, Mohan V., Mazierska, Janina, Savvides, Nick, Ohshima, Shigetoshi, and Oikawa, Shinichro (2002) Comparison of microwave properties of YBCO films on MgO and LaAlO3 substrates. Physica C: Superconductivity and its Applications, 372 (1). pp. 474-477.

Lei, Chengwang, and Patterson, John C (2002) Unsteady natural convection in a triangular enclosure induced by absorption of radiation. Journal of Fluid Mechanics, 460. pp. 181-209.

Lima, R. S., Kucuk, A., and Berndt, C. C. (2002) Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 327 (2). pp. 117-256.

Liovic, Peter, Rudman, Murray, and Liow, Jong-Leng (2002) Numerical modelling of free surface flows in metallurgical vessels. Applied Mathematical Modelling, 26 (2). pp. 113-140.

Mazierska, Janina, McGrath, Jonathon, and Jacob, Mohan V. (2002) Accuracy comparison of the multifrequency and the three frequencies computations of loss tangent and relative permittivity of low loss dielectric materials using the dielectric resonator technique. In: Proceedings of the 2002 Asia-Pacific Microwave Conference. From: 2002 Asia-Pacific Microwave Conference (APMC 2002), 19-22 November 2002, Kyoto, Japan.

Patterson, John C., Graham, Tasman, Schopf, Wolfgang, and Armfield, S.W. (2002) Boundary layer development on a semi infinite, suddenly heated vertical plate. Journal of Fluid Mechanics, 453. pp. 39-55.

Leong, K., Mazierska, J., Jacob, M.V., Ledenyov, D., and Batt, S. (2002) Comparing unloaded Q-factor of a high-Q dielectric resonator measured using the transmission mode and reflection mode methods involving S-parameters circle fitting. In: Microwave Symposium Digest 2002 (3), pp. 1665-1668. From: IEEE MTT-S International Microwave Symposium, 2-7 June 2002, Seattle, WA, USA.

Virkutyte, Jurate (2002) Electrokinetic treatment overview 2002, science of the total environment. Science of the Total Environment, 289 (1-3). pp. 97-121.

Mcmurray, Scott Herbert, and Griffin, Gregory John (2002) Extraction of aconitic acid from mixtures of organic acids and cane molasses solutions using supported liquid membranes. Journal of Chemical Technology and Biotechnology, 77 (11). pp. 1262-1268.

Leong, Y.K., Maguire, K.A., and Ridd, M. (2002) Identification of component for minimisation to achieve low molasses viscosity. In: Proceedings of the 2002 Conference of the Australian Society of Sugar Cane Technologists (24), pp. 418-423. From: Australian Society of Sugar Cane Technologists 24th Conference , 29 April - 2 May 2002, Cairns, Queensland, Australia.

Jacob, Mohan V., Mazierska, Janina, Leong, Kenneth, and Krupka, Jerzy (2002) Microwave properties of low-loss polymers at cryogenic temperatures. IEEE Transactions on Microwave Theory and Techniques, 50 (2). pp. 474-480.

Yeow, Y.Leong, Wickramasinghe, S.Ranil, Leong, Yee-Kwong, and Han, Binbing (2002) Model-independent relationships between hematocrit, blood viscosity, and yield stress derived from Couette viscometry data. Biotechnology Progress, 18 (5). pp. 1068-1075.

Leong, Y.K. (2002) Molecular configuration of adsorbed cis- and trans-1, 2-ethylene dicarboxylic acids and interparticle forces in colloidal dispersions. Langmuir, 18 (6). pp. 2448-2449.

Lei, Chengwang, and Patterson, John C. (2002) Natural convection in a reservoir sidearm subject to solar radiation: a two-dimensional simulation. Numerical Heat Transfer, Part A, Applications, 42 (1 & 2). pp. 13-32.

Lei, C., and Patterson, J.C. (2002) Natural convection in a reservoir sidearm subject to solar radiation: experimental observations. Experiments in Fluids, 32 (5). pp. 590-599.

Yeow, Y. Leong, Leong, Yee-Kowng, Wickramasinghe, S. Ranil, and Han, Binbing (2002) Obtaining the shear stress versus shear rate relationship and yield stress of blood from capillary viscometry data by Tikhonov regularization. Biotechnology Progress, 18 (4). pp. 879-884.

Leong, Kenneth, and Mazierska, Janina (2002) Precise measurements of the Q factor of dielectric resonators in the transmission mode: accounting for noise, crosstalk, delay of uncalibrated lines, coupling loss, and coupling reactance. IEEE Transactions on Microwave Theory and Techniques, 50 (9). pp. 2115-2127.

Visvanathan, Chettiyappan, Boonthanon, Natapol, Sathasivan, Arumugam, and Jegatheesan, Veeriah (2002) Pretreatment of seawater for biodegradable organic content removal using membrane bioreactor. Desalination, 153 (1-3). pp. 133-140.

Sivakugan, N., and Johnson, K. (2002) Probabilistic design chart for settlements of shallow foundations in granular soils. Australian Civil Engineering Transactions, 43. pp. 19-24.

Leong, Y.K., and Yeow, Y.L. (2002) Processing the Couette viscometry data of molasses by Tikhonov regularisation. International Sugar Journal, 104 (1246). pp. 463-467.

Kapitzke, IR, Matheson, MJ, and Hardy, TA (2002) Reef infrastructure guidelines: tourist pontoons. CRC Reef Research Centre Technical Report No 39 . Cooperative Research Centre for the Great Barrier Reef World Heritage Area, Townsville.

Leong, Y., Maguire, K., and Ridd, M.J. (2002) Rheology and pipeline transportation of final molasses. International Sugar Journal, 104 (1238). pp. 59-63.

Liow, Jong-leng (2002) Sloshing of melts in a bath smelting process having a elliptic cross section. Iron and Steel Institute of Japan International, 42 (7). pp. 694-701.

Lavarack, B.P., Griffin, G.J., and Rodman, D. (2002) The acid hydrolysis of sugarcane bagasse hemicellulose to produce xylose, arabinose, glucose and other products. Biomass & Bioenergy, 23 (5). pp. 367-380.

Peng, Zhongxiao (2002) An integrated intelligence system for wear debris analysis. Wear, 252 (9-10). pp. 730-743.

Brassington, G.B., Patterson, J.C., and Lee, M. (2002) A new algorithm for analyzing shadowgraph images. Journal of Flow Visualization & Image Processing, 9 (1). pp. 1-27.

Yeow, Y.L., Perona, P., and Leong, Y. (2002) A reliable method of extracting the rheological properties of fruit purees from flow loop data. Journal of Food Science, 67 (4). pp. 1407-1411.

Leong, Yee Kwong, and Yeow, Y. Leong (2001) Compressive yield stress from multiple-speed centrifuge measurements. Aiche Journal, 47 (12). pp. 2798-2806.

Peng, Z., and Goodwin, S. (2001) Wear-debris analysis in expert systems. Tribology Letters, 11 (3-4). pp. 177-184.

Leong, Y.K., Seah, Ulric, Chu, S.Y., and Ong, B.C. (2001) Effects of Gum Arabic macromolecules on surface forces in oxide dispersions. Colloids and Surfaces A: physicochemical and engineering aspects, 182 (1-3). pp. 263-268.

Griffin, G.J., and Wood, D.G. (2001) Non-adiabatic catalytic combustion at a fin surface involving heat extraction from the fin edge. Combustion and Flame, 125 (4). pp. 1230-1238.

Kessissoglou, N.J. (2001) An analytical and experimental investigation on active control of the flexural wave transmission in a simply supported ribbed plate. Journal of Sound and Vibration, 240 (1). pp. 73-85.

Hardy, Thomas A., Mason, Luciano B., and McConochie, Jason D. (2001) A wave model for the Great Barrier Reef. Ocean Engineering, 28 (1). pp. 45-70.

Mazierska, Janina, and Wilker, Charles (2001) Accuracy issues in surface resistance measurements of high temperature superconductors using dielectric resonators. IEEE Transactions on Applied Superconductivity, 11 (1). pp. 3217-3225.

Mazierska, Janina, and Wilker, Charles (2001) Accuracy issues in surface resistance measurements of high temperature superconductors using dielectric resonators (corrected). IEEE Transactions on Applied Superconductivity, 11 (4). pp. 4140-4147.

Leong, Kenneth, and Mazierska, Janina (2001) Accurate measurements of surface resistance of HTS films using a novel transmission mode Q-factor technique. Journal of Superconductivity, 14 (1). pp. 93-103.

Kessissoglou, Nicole J. (2001) Active attenuation of the wave transmission through an L-plate junction. Journal of the Acoustical Society of America, 110 (1). pp. 267-277.

Peterson, Eric L., Wadhwa, Lal C., and Harris, Jonathan A. (2001) Arrangement of aerators in an intensive shrimp growout pond having a rectangular shape. Aquacultural Engineering, 25 (1). pp. 51-65.

Leong, Y. (2001) Charged patch attraction in dispersion: effect of polystyrene sulphonate molecular weight or patch size. Colloid and Polymer Science, 279 (1). pp. 82-87.

Crossman, David J., Choat, J. Howard, Clements, Kendall D., Hardy, Tom, and McConochie, Jason (2001) Detritus as food for grazing fishes on coral reefs. Limnology and Oceanography, 46 (7). pp. 1596-1605.

Kauppila, D.J., Loughran, J.G., and Kent, G.A. (2001) Fundamental studies into the dewatering of prepared cane and bagasse between grooved surfaces. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 437-443.

Limin, Sun, Berndt, CC, Gross, KA, and Kucuk, A (2001) Material fundamentals and clinical performance of Plasma- Sprayed Hydroxyapatite Coatings: A review. Journal of biomedical materials research, 58 (5). pp. 570-592.

Lawrey, Eric, and Kikkert, Cornelis Jan (2001) Maximizing signal strength for OFDM inside buildings. IEEE Transactions on Microwave Theory and Techniques, 49 (11). pp. 2131-2136.

Lin, Wenxian, and Armfield, SW (2001) Natural convection cooling of rectangular and cylindrical containers. International Journal of Heat and Fluid Flow, 22. pp. 72-81.

Jacob, M.V., Mazierska, J., Leong, K., and Krupka, J. (2001) Novel method for calculation and measurement of unloaded Q-factor of superconducting dielectric resonators. In: Microwave Symposium Digest 2001 (3), pp. 1993-1996. From: 2001 IEEE MTT-S International Microwave Symposium, 20-25 May 2001, Phonenix, AZ.

Daniels, P.G., and Patterson, J.C. (2001) On the short-wave instability of natural convection boundary layers. Proceedings of the Royal Society of London Series A, Mathematical, Physical and Engineering Sciences, 457. pp. 519-538.

Mazierska, Janina, and Jacob, Mohan V. (2001) Progress in high temperature superconducting planar filters for wireless communication. In: Asia Pacific Microwave Conference (3), pp. 1004-1007. From: Microwaves for New Century APMC 2001, 3-6 December 2001, Taipei, Taiwan, R.O.C..

Leong, Y., McBain, G.D., Chu, S.Y., and Ong, B.C. (2001) Pseudoplastic and viscoelastic behaviour of molasses. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 341-345.

Jacob, Mohan, Mazierska, Janina, Leong, Kenneth, and Krupka, Jerzy (2001) Simplified method for measurements and calculations of coupling coefficients and Q^o factor of high-temperature superconducting dielectric resonators. IEEE Transactions on Microwave Theory and Techniques, 49 (12). 2401- 2407.

Lei, Chengwang, Cheng, Liang, and Kavanagh, Ken (2001) Spanwise length effects on three-dimensional modelling of flow over a circular cylinder. Computer Methods in Applied Mechanics and Engineering, 190 (22-23). pp. 2909-2923.

Lavarack, B.P., Griffin, G.J., and Rodman, D. (2000) Measured kinetics of the acid-catalysed hydrolysis of sugar cane bagasse to produce xylose. Catalysis Today, 63 (2-4). pp. 257-265.

Sheehan, M., and Sharratt, P.N. (2000) Predicting solvent effects on reactions and liquid-liquid equilibrium by computer simulation. Chemical Engineering Research and Design, 78 (8). pp. 1077-1083.

Peterson, Eric L., Harris, Jonathan A., and Wadhwa, Lal C. (2000) CFD modelling pond dynamic processes. Aquacultural Engineering, 23 (1-3). pp. 61-93.

Ginger, J.D., Reardon, G.F., and Whitbread, B.J. (2000) Wind load effects and equivalent pressures on low-rise house roofs. Engineering Structures, 22 (6). pp. 638-646.

Chandramalar, A.V.M., Kua, S.K., Chan, C.Y., Lim, Y.Y., and Leong, Y.K. (2000) Flow behaviour of titanium dioxide dispersions in the presence of 2-hydroxyethyl cellulose. Colloid and Polymer Science, 278 (5). pp. 485-489.

Peterson, Eric L. (2000) Observations of pond hydrodynamics. Aquacultural Engineering, 21 (4). pp. 247-269.

Liu, T., Karunasena, W.M., Kitipornchai, S., and Veidt, M. (2000) The influence of backward wave transmission on quantitative ultrasonic evaluation using Lamb wave propagation. Journal of the Acoustical Society of America, 107 (1). pp. 306-314.

Kessissoglou, Nicole J. (2000) Active control of the plate energy transmission in a semi-infinite ribbed plate. The Journal of the Acoustical Society of America, 107 (1). pp. 324-331.

Mazierska, Janina, and Krupka, Jerzy (2000) Dielectric resonators for low temperature electronics applications. In: Proceedings of 13th International Conference on Microwaves, Radar and Wireless Communications (MIKON-2000) (1), pp. 45-48. From: MIKON-2000: 13th International Conference on Microwaves, Radar and Wireless Communications, 22-24 May 2000, Wrocław, Poland.

Lin, Wenxian, and Armfield, S. W. (2000) Direct simulation of weak axisymmetric fountains in a homogeneous fluid. Journal of Fluid Mechanics, 403. pp. 67-88.

McBain, G.D., Suehrcke, H., and Harris, J.A. (2000) Evaporation from an open cylinder. International Journal of Heat and Mass Transfer, 43 (12). pp. 2117-2128.

Mazierska, J., Leong, K.T., and Jacob, M.V. (2000) Microwave characterisation of superconducting materials: what accuracy can be achieved in surface resistance measurements using the Hakki-Coleman dielectric resonators? In: Proceedings of the 2000 Asia-Pacific Microwave Conference, pp. 608-611. From: 2000 Asia-Pacific Microwave Conference, 3-6 December 2000, Sydney, NSW, Australia.

Griffin, G.J., and Wood, D.G. (2000) Modelling of the catalytic combustion of lean fuel flowing over a fin with heat extraction from the trailing edge. Catalysis Today, 63 (2-4). pp. 387-395.

Suehrcke, Harry (2000) On the relationship between duration of sunshine and solar radiation on the earth's surface: Ångström's equation revisited. Solar Energy, 68 (5). pp. 417-425.

Wadhwa, Lal C. (2000) Optimizing deployment of shiploaders at bulk export terminal. Journal of Waterway Port, Coastal and Ocean Engineering, 126 (6). pp. 297-304.

Krupka, Jerzy, and Mazierska, Janina (2000) Single-crystal dielectric resonators for low-temperature electronics applications. IEEE Transactions on Microwave Theory and Techniques, 48 (7). pp. 1270-1274.

Lei, Chengwang, Cheng, Liang, and Kavanagh, Ken (2000) A finite difference solution of the shear flow over a circular cylinder. Ocean engineering, 27 (3). pp. 271-290.

Bhargava, A., Griffin, G.J., and Green, J.C.A. (2000) A model of heat transfer across an epoxy based fire retardant layer undergoing sublimation, intumescence and degradation. Developments in Chemical Engineering and Mineral Processing, 8 (1-2). pp. 75-91.

Wosik, J., Xie, L-M., Mazierska, J., and Grabovickic, R. (1999) Influence of columnar defects on surface resistance of YBa2Cu3Ox superconducting thin films; nonlinear effects. Applied Physics Letters, 75 (12). pp. 1781-1783.

Jacob, Mohan V., Mazierska, Janina, and Srivastava, G.P. (1999) Modeling of nonlinear surface impedance of high-Tc superconductors using an exponential vortex penetration model. Journal of Superconductivity, 12 (2). pp. 377-384.

Mazierska, J., and Grabovickic, R. (1999) Surface resistance of YBa2Cu3O7 superconducting films on LaAlO3, NdGaO3 and Al2O3 substrates at varying microwave power levels. In: Proceedings of the 1999 Asia Pacific Microwave Conference: microwaves enter the 21st century (3), pp. 622-625. From: APMC 1999: 1999 Asia Pacific Microwave Conference: microwaves enter the 21st century, 30 November - 3 December 1999, Singapore.

Mazierska, Janina, and Grabovickic, Robert (1998) Circulating power, RF magnetic field, and RF current density of shielded dielectric resonators for power handling analysis of high-temperature superconducting thin films of arbitrary thickness. IEEE Transactions on Applied Superconductivity, 8 (4). pp. 178-187.

Krupka, Jerzy, and Mazierska, Janina (1998) Improvement of accuracy in measurements of the surface resistance of superconductors using dielectric resonators. IEEE Transactions on Applied Superconductivity, 8 (4). pp. 164-167.

Mazierska, Janina E., and Allen, Gregory H. (1998) Analysis of high frequency properties of multilayer structures for multichip modules. Applied Superconductivity, 4 (12). pp. 635-643.

Mazierska, Janina E. (1998) High temperature superconducting films and HTS devices for wireless communication systems. In: Proceedings of the 12th International Conference on Microwaves and Radar (MIKON-98) (3), pp. 853-857. From: MIKON-1998: 12th International Conference on Microwaves and Radar, 20-22 May 1998, Kraków, Poland.

Jacob, Mohan V., Mazierska, Janina, Kim, Jeha, Kang, Kwang-Yong, and Srivastava, G.P. (1998) Microwave and microstructural studies of silver-doped YBa2Cu3O7-δ thin films. Superconductor Science & Technology, 11 (11). pp. 1217-1221.

Mazierska, Janina (1997) Dielectric resonator as a possible standard for characterization of high temperature superconducting films for microwave applications. Journal of Superconductivity, 10 (2). pp. 73-84.

Leong, Kenneth, Mazierska, Janina, and Krupka, Jerzy (1997) Measurements of unloaded Q-factor of transmission mode dielectric resonators. In: 1997 IEEE MTT-S International Microwave Symposium Digest (3), pp. 1639-1642. From: 1997 IEEE MTT-S International Microwave Symposium, 8-13 June 1997, Denver, Colorado, USA.

Mazierska, Janina (1997) Sapphire and rutile dielectric resonators for measurements of surface resistance of superconducting thin films. In: 1997 Asia-Pacific Microwave Conference Proceedings (1), pp. 125-128. From: APMC 1997: 1997 Asia-Pacific Microwave Conference, 2-5 December 1997, Hong Kong.

Ceremuga, Janina, and Krupka, Jerzy (1996) Dielectric resonators for microwave characterization of high-temperature superconductors. In: Proceedings of SPIE: Oxide Superconductor Physics and Nano-Engineering II (2697), pp. 77-86. From: Oxide Superconductor Physics and Nano-Engineering II, 30 January - 2 February 1996, San Jose, CA, USA.

Krupka, J., Geyer, R.G., Baker-Jarvis, J., and Ceremuga, J. (1996) Measurements of the complex permittivity of microwave circuit board substrates using split dielectric resonator and reentrant cavity techniques. In: Proceedings of the Seventh International Conference on Dielectric Materials, Measurements and Applications, pp. 21-24. From: Seventh International Conference on Dielectric Materials, Measurements and Applications, 23-26 September 1996, Bath, UK.

Savvides, Nick, Katsaros, Alex, Reilly, David, Foley, Cathy, Leong, Kenneth, and Ceremuga, Janina (1996) Microwave properties and microstructure of Y1Ba2Cu3O7 thin films. Czechoslovak Journal of Physics, 46 (2 Supplement). pp. 1109-1110.

Leong, Kenneth, Grabovickic, Robert, and Ceremuga, Janina (1996) Review of methods for determining the loaded Q-factor of microwave resonators. In: Proceedings of the Australian and New Zealand Institutes of Physics 20th Annual Condensed Matter Physics Meeting, TP30-TP30. From: ANZIP 1996: Australian and New Zealand Institutes of Physics 20th Annual Condensed Matter Physics Meeting, 30 January - 2 February 1996, Wagga Wagga, NSW.

Ceremuga, Janina, Krupka, Jerzy, Geyer, Richard, and Modelski, Józef (1995) Influence of films' thickness and air gaps in surface impedance measurements of high temperature super-conductors using the dielectric resonator technique. IEICE Transactions on Electronics, E78-C (8). pp. 1106-1110.

Ceremuga, Janina, Krupka, Jerzy, and Kościuk, Tomasz (1995) Resonant measurements of surface resistance of high-T(c) superconducting films: how good or bad are they? Journal of Superconductivity, 8 (6). pp. 681-689.

Ceremuga, Janina (1995) Review of recent developments in microwave research in Australia. IEICE Transactions on Electronics, E78-C (8). pp. 902-906.

Ceremuga, Janina E., and Allen, Gregory H. (1994) Simulation of surface resistance of high temperature YBa2Cu3O7 multilayers for multichip modules. Physica C: Superconductivity, 235-240 (Part 5). pp. 3367-3368.

Ceremuga, Janina, Barton, Michael, and Miranda, Felix (1994) Analysis of influence of buffer layers on microwave propagation through high-temperature superconducting thin films. Superconductor Science & Technology, 7 (11). pp. 855-867.

Ceremuga-Mazierska, Janina (1992) Transmission of microwave signals through superconducting thin films in waveguides. Superconductor Science & Technology, 5 (6). pp. 391-397.

Osborn, Eric Peter (2016) Characteristic wind actions on large flat roofed porous canopies. Masters (Research) thesis, James Cook University.

Inam, Mohammad Ilias (2016) Behavior of transitional plane fountains in linearly-stratified environments. PhD thesis, James Cook University.

Walter, Rhys (2015) Understanding and improving the degradation behaviour of magnesium-based biomaterials. PhD thesis, James Cook University.

Lovisa, Amy (2015) Characterising the fatigue response of corrugated roof cladding. PhD thesis, James Cook University.

Rahimi Azghadi, S. Mostafa (2014) Neuromorphic VLSI designs for spike timing and rate-based synaptic plasticity with application in pattern classification. PhD thesis, The University of Adelaide.

Ganesalingam, Dhanya (2013) Consolidation properties of recent dredged mud sediment and insights into the consolidation analysis. PhD thesis, James Cook University.

Tian, Yuan (2012) Development of advanced techniques for osteoarthritis diagnosis and assessment. PhD thesis, James Cook University.

Al Shakarji, Reza (2012) Mechanisms of acid mist formation in electrowinning. PhD thesis, James Cook University.

Andutta, Fernando Pinheiro (2012) Water dynamics and transport timescales of coastal waters and estuaries. PhD thesis, James Cook University.

Janardhanan, Sreekanth (2012) Integrated multi-objective management of saltwater intrusion in coastal aquifers using coupled simulation-optimisation and monitoring feedback information. PhD thesis, James Cook University.

Bazaka, Kateryna (2011) Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology. PhD thesis, James Cook University.

Ajayi, Olukayode Oludamilola (2011) Multiscale modelling of industrial flighted rotary dryers. PhD thesis, James Cook University.

Ting, ChingHung (2011) Arching in granular materials with particular reference to inclined mine stopes. PhD thesis, James Cook University.

Devietti, Jenna Leigh (2011) Modelling water quality in tropical water distribution systems. PhD thesis, James Cook University.

Henderson, David James (2010) Response of pierced fixed metal roof cladding to fluctuating wind loads. PhD thesis, James Cook University.

Singh, Shailesh (2009) Drainage and settlement characteristics of hydraulic fills. PhD thesis, James Cook University.

Salehi, Mehdi (2009) Lime-clay modification and its application in the construction of man-made islands. Masters (Research) thesis, James Cook University.

Barnes, Matthew Gavin (2008) Development of a single drum chopper concept for a sugarcane harvester. Masters (Research) thesis, James Cook University.

Lee, Andrew (2008) Modelling the solids transport phenomena within flighted rotary dryers. PhD thesis, James Cook University.

Vucko, Matthew John (2008) The dynamics of water on the skin of Australian carphodactyline and diplodactyline geckos. Masters (Research) thesis, James Cook University.

Sands, Leonard Brett (2008) The influence of groundwater conditions on streambank stability in the Wet Tropics. Masters (Research) thesis, James Cook University.

Holmes, David William (2007) Aspects of finite strain constitutive model for semicrystalline polymers. PhD thesis, James Cook University.

Rankine, Kelda S. (2007) Development of two and three-dimensional method of fragments to analyse drainage behaviour in hydraulic fill stopes. PhD thesis, James Cook University.

Cole, David (2007) The splashing morphology of liquid-liquid impacts. PhD thesis, James Cook University.

Ebersbach, Stephan (2007) Artificial intelligent system for integrated wear debris and vibration analysis in machine condition monitoring. PhD thesis, James Cook University.

Rankine, Briony Rachelle (2007) Assessment and analysis of Queensland clay behaviour. PhD thesis, James Cook University.

Xu, Feng (2006) Transient natural convection in a differentially heated cavity with and without a fin on the sidewall. PhD thesis, James Cook University.

Rankine, Kirralee Jo (2005) An investigation into the drainage characteristics and behaviour of hydraulically placed mine backfill and permeable minefill barricades. PhD thesis, James Cook University.

Fabian, Cesimiro P. (2005) Copper electrodeposition in the presence of guar or activated polyacrylamide. PhD thesis, James Cook University.

Rackemann, Darryn Wallace (2005) Evaluation of circulation and heat transfer in calandria tubes of crystallisation vacuum pans. Masters (Research) thesis, James Cook University.

Bird, James C. (2005) Modelling sub-reef thermodynamics to predict coral bleaching: a case study at Scott Reef, WA. Masters (Research) thesis, James Cook University.

Ali, Md. Imtiaj (2005) Struvite crystallization from nutrient rich wastewater. PhD thesis, James Cook University.

Pennisi, Steve (2004) Development of a more energy efficient Roberts evaporator based on CFD modelling. PhD thesis, James Cook University.

Lowe, Rodney William (2004) Development of a novel rotationally moulded solar hot water system. Masters (Research) thesis, James Cook University.

Keir, John (2004) An analytical and experimental investigation of active vibration control techniques on coupled plate structures. PhD thesis, James Cook University.

Kent, Geoffrey A. (2003) Increasing the capacity of Australian raw sugar factory milling units. PhD thesis, James Cook University.

Britton, Paul Falcon (2003) Application of image measurement and continuum mechanics to measuring the large-strain kinematic behaviour of prepared sugar cane and bagasse. PhD thesis, James Cook University.

This list was generated on Mon Sep 25 22:26:11 2017 AEST.