Publications by: Engineering

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0
Group by: No Grouping | Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items: 1956.

A

Al-Jumaili, Ahmed, Zafar, Muhammad Adeel, Bazaka, Kateryna, Weerasinghe, Janith, and Jacob, Mohan V. (2022) Bactericidal vertically aligned graphene networks derived from renewable precursor. Carbon Trends, 7. 100157.

Antunes, Elsa, Vuppaladadiyam, Arun, Sarmah, Ajit K., Varsha, S.S.V., Pant, Kamal K., Tiwari, Bhagyashree, and Pandey, Ashish (2021) Application of biochar for emerging contaminant mitigation. In: Sarmah, Ajit K., (ed.) Biochar: fundamentals and applications in environmental science and remediation technologies. Advances in Chemical Pollution, Environmental Management and Protection, 7 . Elsevier, Cambridge, USA, pp. 65-91.

Ameratunga, J., and Sivakugan, N. (2021) Basic soil mechanics. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 31-48.

Ameratunga, J., and Sivakugan, N. (2021) Geotechnical testing. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 49-65.

Ameratunga, J., and Sivakugan, N. (2021) Ground improvement methods for soft clays. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 99-116.

Abouzari-Lotf, Ebrahim, Jacob, Mohan V., Ghassemi, Hossein, Zakeri, Masoumeh, Nasef, Mohamed Mahmoud, Abdolahi, Yadollah, Abbasi, Ali, and Ahmad, Arshad (2021) Highly conductive anion exchange membranes based on polymer networks containing imidazolium functionalised side chains. Scientific Reports, 11 (1). 3764.

Al-Juboori, Muqdad, and Datta, Bithin (2021) Improved optimal design of concrete gravity dams founded on anisotropic soils utilizing simulation-optimization model and hybrid genetic algorithm. ISH Journal of Hydraulic Engineering, 27 (S1). pp. 20-37.

Ameratunga, Jay, Sivakugan, Siva, and Das, Braja (2021) Introduction. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 1-13.

Al-Juboori, Muqdad, and Al-Murshidi, Kareem (2021) Optimum Hydraulic Design of Inverted Syphon Structure in Sewer System with a Case Study of Al-Hashmea Sewer Project. KSCE Journal of Civil Engineering, 25 (9). pp. 3346-3358.

Ameratunga, J., and Sivakugan, N. (2021) Parameter derivation. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 67-97.

Ameratunga, J., and Sivakugan, N. (2021) Replacement. In: Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M., (eds.) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK, pp. 117-136.

Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M. (2021) Soft Clay Engineering and Ground Improvement. CRC Press, Abingdon, UK.

Al Nahain, Abdullah, Ignjatovic, Vera, Monagle, Paul, Tsanaktsidis, John, Vamvounis, George, and Ferro, Vito (2020) Anticoagulant heparin mimetics via RAFT polymerization. Biomacromolecules, 21 (2). pp. 1009-1021.

Al-Saadi, Ali, Mathan, Bobby, and He, Yinghe (2020) Biodiesel production via simultaneous transesterification and esterification reactions over SrO-ZnO/Al2O3 as a bifunctional catalyst using high acidic waste cooking oil. Chemical Engineering Research and Design, 162. pp. 238-248.

Abdulwahid, A., Situ, R., Brown, Ri., and Lin, W. (2020) Bubble dynamics in a diesel exhaust wet scrubber. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. 258. From: AFCM2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

Ahmad, Viqar, Sobus, Jan, Greenberg, Mitchell, Shukla, Atul, Philippa, Bronson, Pivrikas, Almantas, Vamvounis, George, White, Ronald, Lo, Shih-Chun, and Namdas, Ebinazar B. (2020) Charge and exciton dynamics of OLEDs under high voltage nanosecond pulse: towards injection lasing. Nature Communications, 11. 4310.

Al-Saadi, Ali, Mathan, Bobby, and He, Yinghe (2020) Esterification and transesterification over SrO–ZnO/Al2O3 as a novel bifunctional catalyst for biodiesel production. Renewable Energy, 158. pp. 388-399.

Almasi, Milad, Karimi, Gholamreza, Ranjbar, Mahnaz, and Rahimi Azghadi, Mostafa (2020) New analogue stop-learning control module using astrocyte for neuromorphic learning. IET Circuits, Devices & Systems, 14 (1). pp. 100-106.

Arnold, Lukas, Kumar, Tarun, Cowley, Joshua, Wheatley, Greg, and Chandrasiri, Rendage Sachini Sandeepa (2020) Shear cell test and hopper design. Engineering Sciences, 59 (3). pp. 90-106.

Altavini de Abreu, Carolina, Ribeiro de Araujo, Renata, and Datta, Bithin (2020) Simulation of nitrate concentrations in the Willamette river, northwestern of the Oregon State, United States. In: Seolin Dias, Leonice, and Medina Benini, Sandra, (eds.) Sustentabilidade em bacias hidrograficas: conhecimento, inovagao e tecnologias em recursos hfdricos. Associao Amigos da Natureza da Alta Paulista, Sao Paulo, Brazil, pp. 153-164.

Al Nahain, Abdullah, Ignjatovic, Vera, Monagle, Paul, Tsanaktsidis, John, Vamvounis, George, and Ferro, Vito (2020) Sulfonated RAFT copolymers as heparin mimetics: synthesis, reactivity ratios, and anticoagulant activity. Macromolecular Bioscience, 20 (9). 2000110.

Abdulwahid, A., Situ, R., Brown, R., and Lin, W. (2020) Thermodynamic analysis of a diesel exhaust wet scrubber. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. 252. From: AFCM2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

Alancherry, S., Jacob, M.V., Prasad, K., Joseph, J., Bazaka, O., Neupane, R., Varghese, O.K., Baranov, O., Xu, S., Levchenko, I., and Bazaka, K. (2020) Tuning and fine morphology control of natural resource-derived vertical graphene. Carbon, 159. pp. 668-685.

Amirabdollahian, Mahsa, Datta, Bithin, and Beck, Peter H. (2019) Application of a link simulation optimization model utilizing quantification of hydrogeologic uncertainty to characterize unknown groundwater contaminant sources. Modeling Earth Systems and Environment, 5 (1). pp. 119-131.

Al-Jumaili, Ahmed, Mulvey, Peter, Kumar, Avishek, Prasad, Karthika, Bazaka, Kateryna, Warner, Jeffrey, and Jacob, Mohan V. (2019) Eco-friendly nanocomposites derived from geranium oil and zinc oxide in one step approach. Scientific Reports, 9. 5973.

Al-Jumaili, Ahmed, Kumar, Avishek, Bazaka, Kateryna, and Jacob, Mohan V. (2019) Electrically insulating plasma polymer/ZnO composite films. Materials, 12 (19). 3099.

Aslam, Md Nazish, Belazi, Akram, Kharbech, Sofiane, Talha, Muhammad, and Xiang, Wei (2019) Fourth order MCA and chaos-based image encryption scheme. IEEE Access, 7. pp. 66395-66409.

Al-Juboori, Muqdad, and Datta, Bithin (2019) Minimum cost design of hydraulic water retaining structure by using coupled simulation optimization approach. KSCE Journal of Civil Engineering, 23 (3). pp. 1095-1107.

Abbas, Rana, Shirvanimoghaddam, Mahyar, Huang, Tao, Li, Yonghui, and Vucetic, Branka (2019) Novel design for short analog fountain codes. IEEE Communications Letters, 23 (8). pp. 1306-1309.

Awin, L.A., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, W. (2019) Numerical simulation for entrainment of forced turbulent fountains. In: ANZIAM Journal: proceedings of the Computational Techniques and Applications Conference (60) C156-C171. From: CTAC 2018: 19th Biennial Computational Techniques and Applications Conference, 27-30 November 2018, Newcastle, NSW, Australia.

Al-Juboori, Muqdad, and Datta, Bithin (2019) Optimum design of hydraulic water retaining structures incorporating uncertainty in estimating heterogeneous hydraulic conductivity utilizing stochastic ensemble surrogate models within a multi-objective multi-realisation optimisation model. Journal of Computational Design and Engineering, 6 (3). pp. 296-315.

Abbas, Rana, Shirvanimoghaddam, Mahyar, Huang, Tao, Li, Yonghui, and Vucetic, Branka (2019) Performance analysis of short analog fountain codes. In: Proceedings of the 2019 IEEE Globecom Workshops. From: 2019 IEEE Globecom Workshops, 9-13 December 2019, Waikoloa, HI, USA.

Al-Juboori, Muqdad, and Datta, Bithin (2019) Performance evaluation of a genetic algorithm-based linked simulation-optimization model for optimal hydraulic seepage-related design of concrete gravity dams. Journal of Applied Water Engineering and Research, 7 (3). pp. 173-197.

Antunes, Elsa, Jacob, Mohan V., Brodie, Graham, and Schneider, Philip A. (2018) Isotherms, kinetics and mechanism analysis of phosphorus recovery from aqueous solution by calcium-rich biochar produced from biosolids via microwave pyrolysis. Journal of Environmental Chemical Engineering, 6 (1). pp. 395-403.

Abdulwahid, Ahmed Adeeb, Situ, Rong, and Brown, Richard J. (2018) Heat and mass transfer process in exhaust wet scrubber. In: Proceedings of the 21st Australasian Fluid Mechanics Conference. 776. From: 21st Australasian Fluid Mechanics Conference, 10-13 Dec 2018, Adelaide, SA, Australia.

Al-Juboori, Muqdad, and Datta, Bithin (2018) Linked simulation-optimization model for optimum hydraulic design of water retaining structures constructed on permeable soils. International Journal of GEOMATE, 14 (44). pp. 39-46.

Antunes, Elsa, Jacob, Mohan V., Brodie, Graham, and Schneider, Philip A. (2018) Microwave pyrolysis of sewage biosolids: dielectric properties, microwave susceptor role and its impact on biochar properties. Journal of Analytical and Applied Pyrolysis, 129. pp. 93-100.

Al-Jumaili, Ahmed, Kumar, Avishek, Bazaka, Kateryna, and Jacob, Mohan V. (2018) Plant secondary metabolite-derived polymers: a potential approach to develop antimicrobial films. Polymers, 10 (5). 515.

Alancherry, Surjith, Bazaka, Kateryna, and Jacob, Mohan V. (2018) RF plasma polymerization of orange oil and characterization of the polymer thin films. Journal of Polymers and the Environment, 26 (7). pp. 2925-2933.

Abdulwahid, Ahmed Adeeb, Situ, Rong, and Brown, Richard J. (2018) Underground diesel exhaust wet scrubbers: current status and future prospects. Energies, 11 (11). 3006.

Antunes, Elsa, Jacob, Mohan V., Brodie, Graham, and Schneider, Philip A. (2017) Silver removal from aqueous solution by biochar produced from biosolids via microwave pyrolysis. Journal of Environmental Management, 203 (Part 1). pp. 264-272.

Al-Tahee, Muammar H., Al-Adilli, Aqeel, and Sivakugan, Nagaratnam (2017) Analysis of behaviour of soil surrounding around Baghdad metro at Baghdad city center during and after tunnel excavation using the finite element method. International Journal of Civil Engineering and Technology, 8 (10). pp. 31-40.

AL-Jumaili, Ahmed, Bazaka, Kateryna, and Jacob, Mohan V. (2017) Retention of antibacterial activity in geranium plasma polymer thin films. Nanomaterials, 7 (9). 270. pp. 1-22.

AL-Jumaili, Ahmed, Alancherry, Surjith, Bazaka, Katia, and Jacob, Mohan V. (2017) Review on the antimicrobial properties of carbon nanostructures. Materials, 10 (9). pp. 1066-1052.

Aghnout, Soraya, Karimi, Gholamreza, and Rahimiazghadi, Mostafa (2017) Modeling triplet spike-timing-dependent plasticity using memristive devices. Journal of Computational Electronics, 16 (2). pp. 401-410.

Al-Juboori, Muqdad, and Datta, Bithin (2017) Artificial neural network modeling and genetic algorithm based optimization of hydraulic design related to seepage under concrete gravity dams on permeable soils. In: Proceedings of the 19th International Conference on Environmental and Water Resources Engineering. pp. 77-83. From: ICEWRE 2017: 19th International Conference on Environmental and Water Resources Engineering, 2-3 February 2017, Melbourne, VIC, Australia.

Alao, Abdur-Rasheed, Stoll, Richard, Song, Xiao-Fei, Miyazaki, Takashi, Hotta, Yasuhiro, Shibata, Yo, and Yin, Ling (2017) Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 102-116.

Amirabdollahian, Mahsa, and Datta, Bithin (2017) Application of simulated annealing in search for efficient optimal solutions of a groundwater contamination related problem. In: Peyvandi, Hossein, (ed.) Computational Optimization in Engineering - Paradigms and Applications. IntechOpen, London, UK, pp. 133-150.

Afshar, Sepideh, and Sheehan, Madoc (2017) Applying infrared thermography and image analysis to dilute 2-phase particulate systems: hot particle curtains. In: Energy Procedia (110) pp. 408-413. From: 1st International Conference on Energy and Power (ICEP2016), 14-16 December 2016, Melbourne, VIC, Australia.

Antunes, Elsa, Schumann, James, Brodie, Graham, Jacob, Mohan V., and Schneider, Philip A. (2017) Biochar produced from biosolids using a single-mode microwave: characterisation and its potential for phosphorus removal. Journal of Environmental Management, 196. pp. 119-126.

Afshar, Sepideh, and Sheehan, Madoc (2017) CFD and infrared thermography of particle curtains undergoing convection heat transfer: image analysis and edge prediction. Powder Technology, 325. pp. 167-179.

Alao, Abdur-Rasheed, Stoll, Richard, Song, Xiao-Fei, Abbott, John R., Zhang, Yu, Abduo, Jaafar, and Yin, Ling (2017) Fracture, roughness and phase transformation in CAD/CAM milling and subsequent surface treatments of lithium metasilicate/disilicate glass-ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 74. pp. 251-260.

Al-Juboori, Muqdad, and Datta, Bithin (2017) Influence of hydraulic conductivity and its anisotropy ratio on the optimum hydraulic design of water retaining structures founded on permeable soils. In: Proceedings of the 13th Hydraulics in Water Engineering Conference. From: 13th Hydraulics in Water Engineering Conference, 13-16 November 2017, Sydney, NSW, Australia.

Al-Jumaili, Ahmed, Alancherry, Surjith, Bazaka, Kateryna, and Jacob, Mohan V. (2017) The electrical properties of plasma-deposited thin films derived from pelargonium graveolens. Electronics, 6 (4).

Ameratunga, Jay, Sivakugan, Nagaratnam, and Das, Braja M. (2016) Correlations of Soil and Rock Properties in Geotechnical Engineering. Developments in Geotechnical Engineering . Springer, New Delhi, India.

Ajayi, O.O., and Sheehan, M.E. (2015) Pseudophysical compartment modeling of an industrial flighted rotary dryer with flighted and unflighted sections: energy. Industrial & Engineering Chemistry Research, 54 (49). pp. 12331-12341.

Ahmad, Jakaria, Bazaka, Kateryna, Vasilev, Krasimir, and Jacob, Mohan V. (2015) Electrical conduction in plasma polymerized thin films of γ-terpinene. Journal of Applied Polymer Science, 132 (30). 42318.

Ahmad, Jakaria, Bazaka, Kateryna, Whittle, Jason D., Michelmore, Andrew, and Jacob, Mohan V. (2015) Structural characterization of γ-terpinene thin films using mass spectroscopy and X-Ray photoelectron spectroscopy. Plasma Processes and Polymers, 12 (10). pp. 1085-1094.

Afshar, Sepideh, Sheehan, Madoc, and Fazlollahi, Amir (2015) Using CFD to derive reduced order models for heat transfer in particle curtains. Progress in Computational Fluid Dynamics, 15 (2). pp. 71-80.

Alabbasi, Alyaa, Kannan, M. Bobby, and Blawert, C. (2014) Dual layer inorganic coating on magnesium for delaying the biodegradation for bone fixation implants. Materials Letters, 124. pp. 188-191.

Alabbasi, Alyaa, Mehjabeen, Afrin, Kannan, M. Bobby, Ye, Qingsong, and Blawert, Carsten (2014) Biodegradable polymer for sealing porous PEO layer on pure magnesium: an in vitro degradation study. Applied Surface Science, 301. pp. 463-467.

Ahmad, Jakaria, Bazaka, Kateryna, and Jacob, Mohan V. (2014) Optical and surface characterization of radio frequency plasma polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Electronics, 3 (2). pp. 266-281.

Ajayi, O.O., and Sheehan, M.E. (2014) Pseudophysical compartment modeling of an industrial rotary dryer with flighted and unflighted sections: solids transport. Industrial & Engineering Chemistry Research, 53. pp. 15980-15989.

Ahmad, Jakaria, Bazaka, Katia, Oelgemöller, Michael, and Jacob, Mohan V. (2014) Wetting, solubility and chemical characteristics of plasma-polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films. Coatings, 4 (3). pp. 527-552.

Ahmad, Jakaria, Bazaka, Kateryna, Anderson, Liam J., White, Ronald D., and Jacob, Mohan V. (2013) Materials and methods for encapsulation of OPV: a review. Renewable and Sustainable Energy Reviews, 27. pp. 104-117.

Atalar, C., Patra, C.R., Das, B., and Sivakugan, N. (2013) Bearing capacity of shallow foundation under eccentrically inclined load. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics (1) pp. 3439-3442. From: 18th ICSMGE: 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics, 2-6 September 2013, Paris, France.

Anderson, Liam J., Easton, Christopher D., and Jacob, Mohan V. (2013) Compatibility of plasma-deposited linalyl acetate thin films with organic electronic device fabrication techniques. Journal of Materials Science, 48 (14). pp. 4851-4859.

Anderson, L.J., and Jacob, M.V. (2013) Temperature dependent electrical impedance spectroscopy measurements of plasma enhanced chemical vapour deposited linalyl acetate thin films. Thin Solid Films, 534. pp. 452-458.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2013) Performance evaluation of acid mist reduction techniques in copper electrowinning. Hydrometallurgy, 131-132. pp. 76-80.

Afshar, Sepideh, and Sheehan, Madoc (2013) CFD and experimental study of convectional heat transfer in free falling particle curtains. In: Proceedings of the 11th International Conference of Numerical Analysis and Applied Mathematics (1558) pp. 2005-2008. From: ICNAAM 2013: 11th International Conference of Numerical Analysis and Applied Mathematics, 21-27 September 2013, Rhodes, Greece.

Alabbasi, Alyaa, Kannan, M. Bobby, Walter, Rhys, Störmer, M., and Blawert, C. (2013) Performance of pulsed constant current silicate-based PEO coating on pure magnesium in simulated body fluid. Materials Letters, 106. pp. 18-21.

Afshar, Sepideh, and Sheehan, Madoc (2012) Using CFD to simulate heat transfer in particle curtains. In: Ninth International Conference on CFD in the Minerals and Process Industries. pp. 1-7. From: Ninth International Conference on CFD in the Minerals and Process Industries, 10-12 December 2012, Melbourne, Australia.

Arulrajah, A., Piratheepan, J., Bo, M.W., and Sivakugan, N. (2012) Geotechnical characteristics of recycled crushed brick blends for pavement sub-base applications. Canadian Geotechnical Journal, 49 (7). pp. 796-811.

Ajayi, O.O., and Sheehan, M.E. (2012) Application of image analysis to determine design loading in flighted rotary dryers. Powder Technology, 223. pp. 123-140.

Ajayi, O.O., and Sheehan, M.E. (2012) Design loading of free flowing and cohesive solids in flighted rotary dryers. Chemical Engineering Science, 73. pp. 400-411.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2012) Acid mist and bubble size correlation in copper electrowinning. Hydrometallurgy, 113-114. pp. 39-41.

Anderson, L.J., and Jacob, M.V. (2012) Electrical characterisations of plasma polyermised linalyl acetate. Materials Science and Engineering B: Advanced Functional Solid-state Materials, 177 (3). pp. 311-315.

Alabbasi, Alyaa, Liyanaarachchi, S., and Kannan, M.B. (2012) Polylactic acid coating on a biodegradable magnesium alloy: an in vitro degradation study by electrochemical impedance spectroscopy. Thin Solid Films, 520 (23). pp. 6841-6844.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2011) The sizing of oxygen bubbles in copper electrowinning. Hydrometallurgy, 109 (1-2). 23. pp. 168-174.

Anderson, Liam, Jacob, Mohan, Barra, M., Di Girolamo, F.V., and Cassinese, A. (2011) Effect of a plasma polymerised linalyl acetate dielectric on the optical and morphological properties of an n-type organic semiconductor. Applied Physics A: Materials Science and Processing, 105 (1). pp. 95-102.

Anderson, L., and Jacob, M. (2011) Microwave characterization of a novel, environmentally friendly, plasma polymerized organic thin film. Physics Procedia, 14. pp. 87-90.

Anderson, L., Di Girolamo, F., Barra, M., Cassinese, A., and Jacob, M.V. (2011) Optical properties of thermally evaporated PDI-8CN2 thin films. Physics Procedia, 14. pp. 29-33.

Atrens, A., Dietzel, W., Bala Srinivasan, P., Winzer, N., and Kannan, M. Bobby (2011) Stress corrosion (SCC) of magnesium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 341-380.

Ali, M.M. Younus, Arulrajah, A., Sivakugan, N., and Bo, M. W. (2010) Compaction testing of recycled glass blended with recycled crushed concrete for footpath applications. In: Proceedings of the Sixth International Congress on Environmental Geotechnics (2) pp. 1114-1119. From: Sixth International Congress on Environmental Geotechnics, 8-12 November 2010, Delhi, India.

Anderson, L.J., and Jacob, M.V. (2010) Effect of RF power on the optical and morphological properties of RF plasma polymerised linalyl acetate thin films. Applied Surface Science, 256 (10). pp. 3293-3298.

Ajayi, O.O., and Sheehan, M.E. (2010) Image analysis of holdup patterns in flighted rotary dryer. In: Proceedings of Chemeca 2010. pp. 1-10. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2010) Measurement of bubble size distribution in copper electrowinning process by image analysis. In: Proceedings of Copper 2010: Electrowinning and -refining (4) pp. 1237-1252. From: Copper 2010, 6 - 10 June 2010, Hamburg, Germany.

Allen, Christopher, Peng, Zhongxiao, Yin, Ling, and Carmichael, Emma (2010) Nano-hardness testing of wear particles in sheep knee joints. Materials Science Forum, 654-656 . pp. 2253-2256.

Al-Adili, A., Sivakugan, N., and Ren, G. (2010) Numerical modelling to reduce Baghdad soil subsidence and settlement on locations of sewage systems. Australian Journal of Civil Engineering, 6 (1). pp. 57-70.

Al-Adili, A., Chandra, S., and Sivakugan, N. (2009) Slippage effect on the settlement response of a granular soft soil system. In: Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering. pp. 853-856. From: 17th International Conference on Soil Mechanics and Geotechnical Engineering, 5-9 October 2009, Alexandria, Egypt.

Ali, Md. Imtiaj, and Schneider, Philip Andrew (2008) An approach of estimating struvite growth kinetic incorporating thermodynamic and solution chemistry, kinetic and process description. Chemical Engineering Science, 63 (13). pp. 3514-3525.

Al-Adili, Aqeel Sh., and Sivakugan, N. (2008) Numerical model to predict the settlement response of two nearby foundations due to geotextile slippage. International Journal of Geotechnical Engineering, 2 (4). pp. 441-453.

Adams, S, Alam, F, Bond, I, Demidenko, S, Gui, X, Harris, R, Kennedy, F, Lai , E, Mazierska, Janina, Weehuizen, F, Alkazaki, M, Amstrong, J, Bullen, A, Cameron, M, Eichler, N, Guan , Y, Henderson, M, Jia, D, Jiang, F, Lowry, B, Lyon, M, McIntyre, D, Patel, P, Pereira, N, Oshana, S, Ryken, U, Selvaraj, S, Wai, D, White, J, and Xu, J (2007) SSETI ESEO New Zealand Ground Station Project. In: Proceedings of the Electronics New Zealand Conference. pp. 19-23. From: ENZCON 2007, 12-13 November 2007, Wellington, New Zealand.

Adam, C.J., and Loughran, J.G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109 (1301). pp. 272-284.

Armfield, S.W., Patterson, John C., and Lin, Wenxian (2007) Scaling investigation of the natural convection boundary layer on an evenly heated plate. International Journal of Heat and Mass Transfer, 50 (7-8). pp. 1592-1602.

Ali, M.I. (2007) Struvite crystallization in fed-batch pilot scale and description of solution chemistry of struvite. Chemical Engineering Research and Design, 85 (3). pp. 344-356.

Abbosh, A.M., Bialkowski, M.E., Jacob, M.V., and Mazierska, J. (2006) Design of a compact ultra-wideband antenna. Microwave & Optical Technology Letters, 48 (8). pp. 1515-1518.

Ali, Md. Imtiaj, and Schneider, Philip Andrew (2006) A fed-batch design approach of struvite system in controlled supersaturation. Chemical Engineering Science, 61 (12). pp. 3951-3961.

Abbosh, A.M., Bialkowski, M.E., Jacob, Mohan V., and Mazierska, Janina (2006) Design of a planar UWB antenna with signal rejection capability in a narrow sub-band. In: Proceedings of the IEEE 63rd Vehicular Technology Conference (6) From: IEEE 63rd Vehicular Technology Conference, 7-10 May 2006, Melbourne, VIC, Australia.

Abbosh, A.M., Bialkowski, M.E., Mazierska, J., and Jacob, M.V. (2006) A planar UWB antenna with signal rejection capability in the 4-6 GHz band. IEEE Microwave and Wireless Components Letters, 16 (5). pp. 278-280.

Adam, C., and Loughran, J. (2005) The effect of blanket thickness on extraction energy in sugarcane rolling mills: a finite element investigation. Biosystems Engineering, 92 (2). pp. 255-263.

Ali, Md Imtiaj, and Schneider, Philip Andrew (2005) Crystallization of struvite from metastable region with different types of seed crystal. Journal of Non-Equilibrium Thermodynamics, 30 (2). pp. 95-111.

Ali, MD Imtiaj, Schneider, Philip A., and Hudson, Neale (2005) Thermodynamic and solution chemistry of struvite. Journal of the Indian Institute of Science, 85 (3). pp. 141-149.

Abbosh, A.M., Bialkowski, M.E., Jacob, M.V., and Mazierska, J. (2005) Investigations into an LTCC based ultra wideband antenna. In: Proceedings of Asia Pacific Microwave Conference 2005. pp. 1525-1528. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Ali, M.I., Schneider, P.A., and Hudson, N. (2004) Dynamic modelling and simulation of nutrient recovery from piggery effluent. In: Proceedings of International Conference on Wastewater Treatment for Nutrient Removal and Reuse 2004 (1) pp. 295-302. From: International Conference on Wastewater Treatment for Nutrient Removal and Reuse 2004, 26 - 29 January 2004, Bangkok, Thailand.

Adam, C.J., and Loughran, J.G. (2004) Multi-variate analysis of frictional interaction between grooved rollers and prepared sugarcane. Transactions of the ASABE, 47 (5). pp. 1611-1618.

Adam, Clayton J., and Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurement for fibro-porous media - a finite element investigation. Journal of Porous Media, 7 (2). pp. 101-117.

Armfield, S.W., and Patterson, J.C. (2000) Start-up flow on a vertical semi-infinite heated plate. In: Proceedings of the 7th Heath and Mass Transfer Conference. pp. 37-43. From: 7th Australasian Heat and Mass Transfer Conference, 3-6 July 2000, Townsville, QLD, Australia.

Atkinson, B.J., Stephens, D.W., Harris, J.A., and Schneider, P.A. (2000) The net pressure driving force due to boiling in calandria tubes. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 449-455. From: ASSCT 2000: 22nd Annual Conference of the Australian Society of Sugar Cane Technologists, 2-5 May 2000, Bundaberg, QLD, Australia.

Alabbasi, Alyaa (2015) Enhanced degradation resistance of metallic magnesium using biocompatible coatings for implant applications. Masters (Research) thesis, James Cook University.

Al Shakarji, Reza (2012) Mechanisms of acid mist formation in electrowinning. PhD thesis, James Cook University.

Andutta, Fernando Pinheiro (2012) Water dynamics and transport timescales of coastal waters and estuaries. PhD thesis, James Cook University.

Ajayi, Olukayode Oludamilola (2011) Multiscale modelling of industrial flighted rotary dryers. PhD thesis, James Cook University.

Ali, Md. Imtiaj (2005) Struvite crystallization from nutrient rich wastewater. PhD thesis, James Cook University.

B

Baker, Stephanie, and Kandasamy, Yogavijayan (2022) Machine learning for understanding and predicting neurodevelopmental outcomes in premature infants: a systematic review. Pediatric Research. (In Press)

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2022) A computationally efficient CNN-LSTM neural network for estimation of blood pressure from features of electrocardiogram and photoplethysmogram waveforms. Knowledge Based Systems. (In Press)

Buntine, Jack T., Carrascosa, Eduardo, Bullock, James N., Muller, Giel, Jacovella, Ugo, Glasson, Christopher R., Vamvounis, George, and Bieske, Evan J. (2022) Photo-induced 6π-electrocyclisation and cycloreversion of isolated dithienylethene anions. Physical Chemistry Chemical Physics, 24. pp. 16628-16636.

Berry, Luke, Wheatley, Greg, Ma, Wenchen, Masoudi Nejad, Reza, and Berto, Filippo (2022) The influence of milling induced residual stress on fatigue life of aluminum alloys. Forces in Mechanics, 7. 100096.

Brice, Sara, Millett, Emma L., and Philippa, Bronson (2022) The validity of using inertial measurement units to monitor the torso and pelvis sagittal plane motion of elite rowers. Journal of Sports Sciences, 40 (8). pp. 950-958.

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2021) Determining respiratory rate from photoplethysmogram and electrocardiogram signals using respiratory quality indices and neural networks. PLoS ONE, 16 (4). e0249843.

Belson, Bruce, Xiang, Wei, Holdsworth, Jason, and Philippa, Bronson (2021) C++20 coroutines on microcontrollers - what we learned. IEEE Embedded Systems Letters, 13 (1). pp. 9-12.

Babamiri, Arash, Hadian, Shaghayegh, and Wheatley, Greg (2021) Fatigue and stress analysis of a load carrying car chassis with reinforced joint using finite element method. Revista GEINTEC: gestao, inovacao e tecnologias, 11 (4). pp. 2156-2176.

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2021) Hybridized neural networks for non-invasive and continuous mortality risk assessment in neonates. Computers in Biology and Medicine, 134. 104521.

Burns, Max, Sheehan, Madoc, and Schneider, Philip (2021) Nucleation and crystal growth kinetic parameter optimization of a continuous Poiseuille flow struvite crystallizer using a discretized population balance and dynamic fluid model. Chemical Engineering Journal, 405. 126607.

Behera, Rabi Narayan, Patra, Chittaranjan, Das, B.M., and Sivakugan, N. (2021) Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load - a critical assessment. International Journal of Geotechnical Engineering, 15 (7). pp. 897-905.

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2021) A hybrid neural network for continuous and non-invasive estimation of blood pressure from raw electrocardiogram and photoplethysmogram waveforms. Computer Methods and Programs in Biomedicine, 207. 106191.

Brice, Sara M., Phillips, Elissa J., Millett, Emma L., Hunter, Adam, and Philippa, Bronson (2020) Comparing inertial measurement units and marker-based biomechanical models during dynamic rotation of the torso. European Journal of Sport Science, 20 (6). pp. 767-775.

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2020) Continuous and automatic mortality risk prediction using vital signs in the intensive care unit: a hybrid neural network approach. Scientific Reports, 10. 21282.

Bodhinayake, G.G., Ginger, J.D., and Henderson, D.J. (2020) Net cladding pressures on industrial building roofs. In: Lecture Notes in Civil Engineering (37) pp. 1077-1085. From: ACMSM25: 25th Australasian Conference on Mechanics of Structures and Materials, 4-7 December 2018, Brisbane, QLD, Australia.

Bu, Qinglei, Wen, Huiqing, Wen, Jiacheng, Hu, Yihua, and Du, Yang (2020) Transient dc bias elimination of dual-active-bridge dc-dc converter with improved triple-phase-shift control. IEEE Transactions on Industrial Electronics, 67 (10). pp. 8587-8598.

Bow, Wilson G., Du, Yang, and Louis, Alan (2019) Modeling and evaluation of real-time energy management systems for microgrids. In: Proceedings of the 29th Australasian Universities Power Engineering Conference. From: AUPEC 2019: 29th Australasian Universities Power Engineering Conference, 26-29 May 2019, Nadi, Fiji.

Belazi, Akram, Talha, Muhammad, Kharbech, Sofiane, and Xiang, Wei (2019) Novel medical image encryption scheme based on chaos a DNA encoding. IEEE Access, 7. pp. 36667-36681.

Ba, Xinran, Wang, Yafeng, Fan, Jiangsheng, and Xiang, Wei (2019) User-priority-based resource allocation for device-to-device communications in 5G underlaying cellular networks. IET Communications, 13 (8). pp. 1016-1024.

Belson, Bruce, Holdsworth, Jason, Xiang, Wei, and Philippa, Bronson (2019) A survey of asynchronous programming using coroutines in the Internet of Things and embedded systems. ACM Transactions on Embedded Computing Systems, 18 (3). 21.

Bodhinayake, G.G., Ginger, J.D., and Henderson, D.J. (2018) Correlation of internal and external pressures on building cladding elements. In: Proceedings of the 19th Australasian Wind Engineering Society Workshop. From: AWES19: 19th Australasian Wind Engineering Society Workshop, 4-6 April 2018, Torquay, VIC, Australia.

Bezzina, G., Sheehan, M., and Walker, C. (2018) The influence of gas velocity and fibre density on the drying kinetics of bagasse. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 424-435. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

Bin, Fen, Chen, Jiaqi, Ge, Xiaohu, and Xiang, Wei (2017) Downlink small-cell base station cooperation strategy in fractal small-cell networks. In: Proceedings of the IEEE Global Communications Conference. From: GLOBECOM 2017: IEEE Global Communications Conference, 4-8 December 2017, Singapore.

Bazaka, Kateryna, and Jacob, Mohan V. (2017) Effects of iodine doping on optoelectronic and chemical properties of polyterpenol thin films. Nanomaterials, 7 (1). pp. 1-16.

Baloch, Asif, and Kannan, M. Bobby (2017) Electropolymerisation of aniline on AZ91 magnesium alloy: the effect of coating electrolyte corrosiveness. Metals, 7 (12).

Baker, Stephanie, Xiang, Wei, and Atkinson, Ian (2017) Internet of Things for smart healthcare: technologies, challenges, and opportunities. IEEE Access, 5. pp. 26521-26544.

Bishop, Dean, Situ, Rong, Brown, Richard, and Surawski, Nicholas (2017) Numerical modelling of biodiesel blends in a diesel engine. Energy Procedia, 110. pp. 402-407.

Bazaka, Kateryna, Ahmad, Jakaria, Oelgemöller, Michael, Uddin, Ashraf, and Jacob, Mohan V. (2017) Photostability of plasma polymerized γ-terpinene thin films for encapsulation of OPV. Scientific Reports, 7. 45599. pp. 1-9.

Bazaka, Kateryna, Grant, Daniel S., Alancherry, Surjith, and Jacob, Mohan V. (2017) Plasma assisted fabrication and processing of biomaterials. In: Francis, Raju, and Sakthi Kumar, D., (eds.) Biomedical Applications of Polymeric Materials and Composites. Wiley, Singapore, pp. 91-124.

Burns, Max, Natividad Marin, Leynard, and Schneider, Philip A. (2016) Investigations of a continuous Poiseuille flow struvite seed crystallizer: mixer performance and aggregate disruption by sonication. Chemical Engineering Journal, 295. pp. 552-562.

Bazaka, Kateryna, Destefani, Ryan, and Jacob, Mohan V. (2016) Plant-derived cis-β-ocimene as a precursor for biocompatible, transparent, thermally-stable dielectric and encapsulating layers for organic electronics. Scientific Reports, 6. 38571. pp. 1-14.

Bazaka, Kateryna, Jacob, Mohan V., and Ostrikov, Kostya (Ken) (2016) Sustainable life cycles of natural-precursor-derived nanocarbons. Chemical Reviews, 116 (1). pp. 163-214.

Birks, Melanie, Smithson, John, Wickett, Di, and Holmes, David (2015) Mapping nursing pathways: a diverse modified Delphi approach. SAGE Open, 5 (3). pp. 1-12.

Bazaka, K., Jacob, M.V., Chrzanowski, W., and Ostrikov, K. (2015) Anti-bacterial surfaces: natural agents, mechanisms of action, and plasma surface modification. RSC Advances, 5 (60). pp. 48739-48759.

Bazaka, Olha, and Bazaka, Kateryna (2015) Cytotoxic effects and biocompatibility of antimicrobial materials. In: Ivanova, Elena P., and Crawford, Russell J., (eds.) Antibacterial Surfaces. Springer, Cham, Switzerland, pp. 113-147.

Berner, Florian, Heimann, Kirsten, and Sheehan, Madoc (2015) Microalgal biofilms for biomass production. Journal of Applied Phycology, 27 (5). pp. 1793-1804.

Brodie, Graham, Jacob, Mohan V., and Farrell, Peter (2015) Microwave and Radio-Frequency Technologies in Agriculture: an introduction for agriculturalists and engineers. De Gruyter Open, Berlin, Germany.

Bazaka, K., and Bazaka, O. (2015) Superhydrophobic polymers. In: Crawford, Russell J., and Ivanova, Elena P., (eds.) Superhydrophobic Surfaces. Elsevier, Amsterdam, the Netherlands, pp. 67-85.

Berner, Florian, Heimann, Kirsten, and Sheehan, Madoc (2015) A perfused membrane biofilm reactor for microalgae cultivation in tropical conditions. In: Proceedings of the 16th Asia Pacific Confederation of Chemical Engineering Congress (2015) 3133047. pp. 291-301. From: APCChE 2015: 16th Asia Pacific Confederation of Chemical Engineering Congress, 27 September - 1 October 2015, Melbourne, VIC, Australia.

Bazaka, Kateryna, Ketheesan, Natkunam, and Jacob, Mohan V. (2014) Polymer encapsulation of magnesium to control biodegradability and biocompatibility. Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8087-8093.

Bhuyan, R.K., Kumar, T. Santhosh, Pamu, D., Renehan, J.M., and Jacob, M.V. (2014) Low temperature and broadband dielectric properties of V(2)O(5) doped Mg(2)TiO(4) ceramics. Materials Express, 4 (5). pp. 349-358.

Bhuyan, Ranjan K., Thatikonda, Santhosh K., Dobbidi, Pamu, Renehan, J.M., and Jacob, Mohan V. (2014) Cryogenic microwave dielectric properties of Mg(2)(TiO(4) ceramics added with CeO(2) nanoparticles. Advances in Material Research, 3 (2). pp. 105-116.

Brodie, Graham, Destefani, Ryan, Schneider, Philip A., Airey, Lyn, and Jacob, Mohan V. (2014) Dielectric properties of sewage biosolids: measurement and modeling. Journal of Microwave Power and Electromagnetic Energy, 48 (3). pp. 147-157.

Bazaka, K., Chrzanowski, W., Ivanova, E., Ketheesan, N., and Jacob, M. (2013) New encapsulating materials for implantable devices. In: Proceedings of the 38th World Congress of the International College of Surgeons. pp. 67-70. From: 38th World Congress of the International College of Surgeons, 7-10 November 2012, Brisbane, QLD, Australia.

Behera, R.N., Patra, C.R., Sivakugan, N., and Das, B.M. (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN: part II. International Journal of Geotechnical Engineering, 7 (2). pp. 165-172.

Bazaka, Kateryna, and Jacob, Mohan V. (2013) Implantable devices: issues and challenges. Electronics, 2 (1). pp. 1-34.

Behera, R.N., Patra, C.R., Sivakugan, N., and Das, B.M. (2013) Prediction of ultimate bearing capacity of eccentrically inclined loaded strip footing by ANN, part I. International Journal of Geotechnical Engineering, 7 (1). pp. 36-44.

Bazaka, Kateryna, and Jacob, Mohan V. (2012) Solubility and surface interactions of RF plasma polymerized polyterpenol thin films. Materials Express, 2 (4). pp. 285-293.

Brodie, Graham, Ahmed, Berhan M., and Jacob, Mohan V. (2012) Microwave characterisation and detection of wood decay. World Journal of Engineering, 9 (4). pp. 265-272.

Bodisco, Timothy, Reeves, Robert, Situ, Rong, and Brown, Richard (2012) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26. pp. 305-314.

Bass, Adrian M., Bird, Michael I., Morrison, Marshall J., and Gordon, Jeremy (2012) CADICA: Continuous Automated Dissolved Inorganic Carbon Analyzer with application to aquatic carbon cycle science. Limnology and Oceanography: Methods, 10. pp. 10-19.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2012) Efficient surface modification of biomaterial to prevent biofilm formation and the attachment of microorganisms. Applied Microbiology and Biotechnology, 95 (2). pp. 299-311.

Bazaka, Kateryna, Crawford, Russell J., and Ivanova, Elena P. (2011) Do bacteria differentiate between degrees of nanoscale surface roughness? Biotechnology Journal, 6 (9). pp. 1103-1114.

Badenoch , Paul R., Coster, Douglas J., Sadlon, Tania A. , Klebe, Sonja , Stirling, John W. , Jaunzems, Alvis E. , and Mazierska, Janina E. (2011) Deep microsporidial keratitis after keratoconjunctivitis. Clinical and Experimental Ophthalmology, 39 (6). pp. 577-580.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2011) Plasma assisted surface modification of organic biopolymers to prevent bacterial attachment. Acta Biomaterialia, 7 (5). pp. 2015-2028.

Bazaka, Kateryna, Jacob, Mohan V., and Bowden, Bruce F. (2011) Optical and chemical properties of polyterpenol thin films deposited via plasma-enhanced chemical vapor deposition. Journal of Materials Research, 26 (8). pp. 1018-1025.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Crawford, Russell J., and Ivanova, Elena P. (2011) The effect of polyterpenol thin film surfaces on bacterial viability and adhesion. Polymers, 3 (1). pp. 388-404.

Bazaka, Kateryna, Crawford, Russell J., Nazarenko, Evgeny L., and Ivanova, Elena P. (2011) Bacterial extracellular polysaccharides. In: Linke , Dirk, and Goldman, Adrian, (eds.) Bacterial Adhesion: Chemistry, Biology and Physics. Advances in Experimental Medicine and Biology, 715 . Springer, London, UK, pp. 213-226.

Bazaka, Kateryna, and Jacob, Mohan V. (2011) Complex permittivity measurements of RF plasma polymerized polyterpenol organic thin films employing split post dielectric resonator. Journal of Polymer Engineering, 31 (2-3). pp. 73-75.

Brodie, Graham, Ahmed, Berhan M., and Jacob, Mohan V. (2011) Detection of decay in wood using microwave characterization. In: Proceedings of the Asia-Pacific Microwave Conference 2011. pp. 1754-1757. From: APMC 2011 Asia-Pacific Microwave Conference, 5-8 December 2011, Melbourne, VIC, Australia.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device. Physics Procedia, 14. pp. 62-66.

Bazaka, Kateryna, Jacob, Mohan V., Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2011) Investigation of interfacial charging and discharging in double-layer pentacene-based metal-insulator-metal device with polyterpenol blocking layer using electric field induced second harmonic generation. Chemical Physics Letters, 503 (1-3). pp. 105-111.

Brodie, Graham, Harris, Gerard, Jacob, Mohan V., Sheehan, Madoc, and Yin, Ling (2011) Microwave modification of sugar cane to enhance juice extraction during milling. Journal of Microwave Power and Electromagnetic Energy, 45 (4). pp. 178-187.

Brodie, G., Jacob, M.V., Sheehan, M., Yin, L., Cushion, M., and Harris, G. (2011) Microwave modifications of sugar cane to enhance juice extraction during milling. International Sugar Journal, 113 (1354). pp. 714-718.

Bazaka, Kateryna, and Jacob, Mohan V. (2011) Nanotribological and nanomechanical properties of plasma-polymerized polyterpenol thin films. Journal of Materials Research, 26 (23). pp. 2952-2961.

Bazaka, Kateryna, Jacob, Mohan V., Crawford, Russell J., and Ivanova, Elena P. (2011) Plasma polymerisation and retention of antibacterial properties of terpinen-4-ol. In: Proceedings of the International Conference on Antimicrobial Research. pp. 175-179. From: ICAR 2010 International Conference on Antimicrobial Research, 3-5 November 2010, Valladolid, Spain.

Bednarz, Tomasz P., Lin, Wenxian, and Saha, Suvash (2010) Scaling of thermo-magnetic convection. In: Proceedings of the 13th Asian Congress on Fluid Mechanics. pp. 1-3. From: ACFM 2010 13th Asian Congress on Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh.

Bazaka, Kateryna, and Jacob, Mohan V. (2010) Effect of iodine doping on surface and optical properties of polyterpenol thin films. Materials Science Forum, 654-656. pp. 1764-1767.

Bazaka, Kateryna, and Jacob, Mohan V. (2010) Post-deposition ageing reactions of plasma derived polyterpenol thin films. Polymer Degradation and Stability, 95 (6). pp. 1123-1128.

Bazaka, Kateryna, Jacob, Mohan V., and Shanks, Robert A. (2010) Fabrication and characterization of RF plasma polymerized thin films from 3,7-dimethyl-1,6-octadien-3-ol for electronic and biomaterial applications. Advanced Materials Research, 123-125. pp. 323-326.

Bazaka, Kateryna, Jacob, Mohan V., Truong, Vi Khanh, Wang, Feng, Pushpamali, Wickrama Arachchilage Anoja, Wang, James Y., Ellis, Amanda V., Berndt, Christopher C., Crawford, Russell J., and Ivanova, Elena P. (2010) Plasma-enhanced synthesis of bioactive polymeric coatings from monoterpene alcohols: a combined experimental and theoretical study. Biomacromolecules, 11 (8). pp. 2016-2026.

Bazaka, Kateryna, Jacob, Mohan V., Ivanova, Elena P., and Truong, Vi Khanh (2010) Radio frequency plasma enhanced synthesis of antifouling polymeric coatings from monoterpene alcohols. In: Proceedings of TENCON 2010. pp. 1486-1491. From: TENCON 2010, 21-24 November 2010, Fukuoka, Japan.

Bazaka, Kateryna, Jacob, Mohan V., and Ivanova, Elena P. (2010) A study of a retention of antimicrobial activity by plasma polymerized terpinen-4-ol thin films. Materials Science Forum, 654-656. pp. 2261-2264.

Bednarz, Tomasz P., Lin, Wenxian, Patterson, John C., Lei, Chengwang, and Armfield, Steven W. (2009) Scaling for unsteady thermo-magnetic convection boundary layer of paramagnetic fluids of Pr > 1 in micro-gravity conditions. International Journal of Heat and Fluid Flow, 30 (6). pp. 1157-1170.

Bednarz, Tomasz, Patterson, John C., Lei, Chengwang, and Ozoe, Hiroyuki (2009) Enhancing natural convection in a cube using a strong magnetic field — Experimental heat transfer rate measurements and flow visualization. International Communications in Heat and Mass Transfer, 36 (8). pp. 781-786.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2009) Unsteady natural convection induced by diurnal temperature changes in a reservoir with slowly varying bottom topography. International Journal of Thermal Sciences, 48 (10). pp. 1932-1942.

Bazaka, K., and Jacob, M.V. (2009) Synthesis of radio frequency plasma polymerized non-synthetic Terpinen-4-ol thin films. Materials Letters, 63 (18-19). pp. 1594-1597.

Bednarz, Tomasz Piotr, Lei, Chengwang, and Patterson, John C. (2009) An experimental study of unsteady natural convection in a reservoir model subject to periodic thermal forcing using combined PIV and PIT. Experiments in Fluids, 47 (1). pp. 107-117.

Bhattacharjya, Rajib Kumar, Datta, Bithin, and Satish, Mysore G. (2009) Performance of an artificial neural network model for simulating saltwater intrusion process in coastal aquifers when training with noisy data. KSCE Journal of Civil Engineering, 13 (3). pp. 205-215.

Bednarz, Tomasz P., Lei, Chengwang, Patterson, John C., and Hiroyuki, Ozoe (2009) Suppressing Rayleigh–Benard convection in a cube using a strong magnetic field — experimental heat transfer rate measurements and flow visualization. International Communications in Heat and Mass Transfer, 36 (2). pp. 97-102.

Bednarz, Tomasz, Lei, Chengwang, and Patterson, John (2009) A numerical study of unsteady natural convection induced by iso-flux surface cooling in a reservoir model. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 56-66.

Bednarz, Tomasz P., Lei, Chengwang, Patterson, John C., and Ozoe, Hiroyuki (2009) Effects of a transverse, horizontal magnetic field on natural convection of a paramagnetic fluid in a cube. International Journal of Thermal Sciences, 48 (1). pp. 26-33.

Barnes, M,G., Loughran, J.G., Whiteing, C., and Lamb, B.W. (2009) Development and testing of a sugarcane harvester single drum chopper system. In: Proceedings of the 2009 Conference of the Australian Society of Sugar Cane Technologists. pp. 546-555. From: 2009 Conference of the Australian Society of Sugar Cane Technologists, 5 - 8 May, 2009, Ballina, NSW, Australia.

Bednarz, Tomasz, Kaneda, Masayuki, Lin, Wenxian, and Dranga, Octavian (2009) Scaling of unsteady magnetic convection boundary layer growth for Pr>1 fluids. In: Proceedings of 46th National Heat Transfer Symposium. pp. 689-690. From: 46th National Heat Transfer Symposium, 2 - 4 June 2009, Kyoto, Japan.

Bednarz, Tomasz, Fornalik, Elzbieta, Ozoe, Hiroyuki, Szmyd, Janusz S., Patterson, John C., and Lei, Chengwang (2008) Influence of a horizontal magnetic field on the natural convection of paramagnetic fluid in a cube heated and cooled from two vertical side walls. International Journal of Thermal Sciences, 47 (6). pp. 668-679.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) An experimental study of unsteady natural convection in a reservoir model cooled from the water surface. Experimental Thermal and Fluid Science, 32 (3). pp. 844-856.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) Unsteady natural convection in a reservoir model subject to periodic heating and cooling at the water surface. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics. - . From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Bednarz, Tomasz P., Lei, Chengwang, and Patterson, John C. (2008) Unsteady natural convection induced by constant surface cooling in a reservoir. ANZIAM Journal, 48. pp. 852-867.

Berndt, Christopher C., and Hodzic, Alma (2007) Bagasse fibre for sustainable manufacturing. Journal of Biobased Materials and Bioenergy, 1 (3). pp. 289-300.

Berndt, Christopher C., Rankine, Kirralee J., and Sivakugan, Nagaratnam (2007) Materials properties of barricade bricks for mining applications. Geotechnical and Geological Engineering, 25 (4). pp. 449-471.

Bhattacharjya, Rajib Kumar, Datta, Bithin, and Satish, Mysore (2007) Artificial neural networks approximation of density dependent saltwater intrusion process in coastal aquifers. Journal of Hydrologic Engineering, 12 (3). pp. 273-282.

Bednarz, T.P., Lei, C., Patterson, J.C., and Ozoe, H. (2007) How expensive space-zero-gravity convection experiments can be carried out in terrestrial conditions - magnetic convection of a paramagnetic fluid. In: 16th Australasian Fluid Mechanics Conference. pp. 368-372. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Bednarz, T.P., Lei, C., and Patterson, J.C. (2007) Particle image thermometry for natural convection flows. In: 16th Australasian Fluid Mechanics Conference. pp. 1165-1170. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Austrlia.

Britton, P.F., Sheehan, M.E., and Schneider, P.A. (2006) A physical description of solids transport in flighted rotary dryers. Powder Technology, 165 (3). pp. 153-160.

Britton, Paul, and Loughran, Jeffrey (2006) Application of image measurement and continuum mechanics to the direct measurement of two-dimensional finite strain in a complex fibro-porous material. International Journal for Computational Methods in Engineering Science &Mechanics, 7 (2). pp. 81-90.

Berndt, Christopher C., and Montavon, Ghislain (2006) Thermal spray: preserving 100 years of technology. Journal of Thermal Spray Technology, 15 (1). pp. 5-8.

Bednarz, Tomasz, Fornalik, Elzbieta, Tagawa, Toshio, Ozoe, Hiroyuki, and Szmyd, Janusz S. (2006) Convection of paramagnetic fluid in a cube heated and cooled from side walls and placed below a superconducting magnet: comparison between experiment and numerical computations. Thermal Science and Engineering, 14 (4). pp. 107-114.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2006) Flight unloading in rotary sugar dryers. International Sugar Journal, 108 (1286). pp. 83-89.

Bhattacharjya, Rajib Kumar, and Datta, Bithin (2005) Optimal management of coastal aquifers using linked simulation optimization approach. Water Resource Management, 19 (3). pp. 295-320.

Bode, Lance, and Mason, Luciano B. (2005) Evaluation of a nonlinear reef parametrisation for steady flows. ANZIAM Journal, 46 (E). pp. 1017-1034.

Britton, Paul, Teh, E-Jen, and Close, Donald (2005) Investigation of bagasse as a thermal insulator. In: Proceedings of the 2005 Conference of the Australian Society of Sugar Cane Technologists (27) pp. 462-471. From: 27th Annual Conference Australian Society of Sugar Cane Technologists, 3-6 May 2005, Bundaberg, QLD, Australia.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2004) Flight unloading in rotary sugar dryers. In: Proceedings fo the 26th Australian Sugar Cane Technologists Conference (26) pp. 1-7. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Burrage, D.M., Steinberg, C.R., Mason, L.B., and Bode, L. (2003) Tidal corrections for TOPEX altimetry in the Coral Sea and Great Barrier Reef Lagoon: comparisons with long-term tide gauge records. Journal of Geophysical Research: oceans, 108 (C7). 34-1.

Bhargava, Atul, and Griffin, Gregory J. (2003) Kinetics of degradation reactions within intumescent and subliming fire retardant coatings. Journal of Fire Sciences, 21 (3). pp. 173-188.

Britton, P.F., and Loughran, J.G. (2003) Measuring local bagasse deformation with a customised image measurement technique. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists. pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Barra, M., Cassinese, A., Cirillo, M., Jacob, M.V., Russo, R., and Vaglio, R. (2002) Miniaturized hairpin superconducting filters for telecommunications applications. Microwave & Optical Technology Letters, 35 (5). pp. 360-362.

Britton, P.F., and Loughran, J.G. (2002) Image tensor analysis: a numerical tool for data acquisition and constitutive analysis of historic continua. In: Proceedings of the 3rd Australasian Congress on Applied Mechanics. pp. 99-104. From: Australasian Congress on Applied Mechanics, 20-22 February 2002, Sydney, Australia.

Brassington, G.B., Patterson, J.C., and Lee, M. (2002) A new algorithm for analyzing shadowgraph images. Journal of Flow Visualization & Image Processing, 9 (1). pp. 1-27.

Brassington, Gary B., Lee, Mark, and Patterson, John C. (2000) Observations of a transient stratified laminar intrusion. In: Proceedings of the 7th Heath and Mass Transfer Conference. pp. 45-51. From: 7th Australasian Heat and Mass Transfer Conference, 3-6 July 2000, Townsville, QLD, Australia.

Bhargava, A., Griffin, G.J., and Green, J.C.A. (2000) A model of heat transfer across an epoxy based fire retardant layer undergoing sublimation, intumescence and degradation. Developments in Chemical Engineering and Mineral Processing, 8 (1-2). pp. 75-91.

Burns, Max William (2017) Kinetic investigations of struvite crystallisation in Poiseuille flow using discretised population balance methods. PhD thesis, James Cook University.

Burns, M., Schneider, P., and Natividad-Marin, L. (2015) Modelling, design and evaluation of a continuous Poiseuille flow struvite seed crystallizer. In: Abstracts from the 9th IWA Symposium on Systems Analysis and Integrated Assessment. From: Watermatex 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment, 14-17 June 2015, Gold Coast, QLD, Australia. (Unpublished)

Bazaka, Kateryna (2011) Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology. PhD thesis, James Cook University.

Barnes, Matthew Gavin (2008) Development of a single drum chopper concept for a sugarcane harvester. Masters (Research) thesis, James Cook University.

Bird, James C. (2005) Modelling sub-reef thermodynamics to predict coral bleaching: a case study at Scott Reef, WA. Masters (Research) thesis, James Cook University.

Britton, Paul Falcon (2003) Application of image measurement and continuum mechanics to measuring the large-strain kinematic behaviour of prepared sugar cane and bagasse. PhD thesis, James Cook University.

C

Cowley, Joshua, Khatamifar, Mehdi, Lin, Wenxian, and Erskine, Daniel (2022) Experimental investigation of static pressure characteristics in a slotted short pin array. Experimental Heat Transfer. (In Press)

Cai, Lei, Mei, Di, Zhang, Zhao Qi, Huang, Yuan ding, Cui, Lan Yue, Guan, Shao Kang, Chen, Dong Chu, Kannan, M. Bobby, Zheng, Yu feng, and Zeng, Rong Chang (2022) Advances in bioorganic molecules inspired degradation and surface modifications on Mg and its alloys. Journal of Magnesium and Alloys, 10 (3). pp. 670-688.

Chen, Xiaoyang, Du, Yang, Lim, Enggee, Fang, Lurui, and Yan, Ke (2022) Towards the applicability of solar nowcasting: A practice on predictive PV power ramp-rate control. Renewable Energy, 195. pp. 147-166.

Chang, Jiaming, Du, Yang, Lim, Eng Gee, Wen, Huiqing, Li, Xingshuo, and Lin, Jiang (2021) Coordinated Frequency Regulation Using Solar Forecasting Based Virtual Inertia Control for Islanded Microgrids. IEEE Transactions on Sustainable Energy, 12 (4). pp. 2393-2403.

Calvert, Brendan, Olsen, Alex, Whinney, James, and Rahimi Azghadi, Mostafa (2021) Robotic spot spraying of Harrisia cactus (Harrisia martinii) in grazing pastures of the Australian rangelands. Plants, 10 (10). 2054.

Cui, Chen, Wu, Shuang, Wang, Zhenyong, Guo, Qing, and Xiang, Wei (2021) A polar codes-based distributed UEP scheme for the internet of things. Wireless Communications and Mobile Computing. 5875797.

Cheesman, Alexander W., Nelson, Paul N., Lim, Han She, Todd, Shannon, Kaartinen-Price, Jai, MacGregor, Colin, Datta, Bithin, Owen, Liz, and Ah-Kee, Dennis (2020) Denitrification bioreactor trial in the Russell River catchment of the Wet Tropics: final report. Report. James Cook University, Cairns, Qld, Australia.

Chen, Yun, Tang, Wanbin, Xiao, Yue, Zheng, Chen, and Xiang, Wei (2020) Expectation propagation aided frequency domain turbo equalizer for single-carrier spatial modulation systems. IEEE Communications Letters, 24 (5). pp. 1124-1128.

Chen, Xiaoyang, Du, Yang, Lim, Enggee, Wen, Huiqing, Yan, Ke, and Kirtley, James (2020) Power ramp-rates of utility-scale PV systems under passing clouds: module-level emulation with cloud shadow modeling. Applied Energy, 268. 114980.

Cao, Rui, Lei, Xia, Xiao, Yue, Li, You, and Xiang, Wei (2020) Space-frequency index modulation for combating ICI in intelligent mobility communications. IEEE Access, 8. pp. 21272-21281.

Cheong, Z., Moreira, G.M., Bettega, M.H.F., Blanco, F., Garcia, G., Brunger, M. J., White, R.D., and Sullivan, J.P. (2020) A comparison of experimental and theoretical low energy positron scattering from furan. Journal of Chemical Physics, 153 (24). 244303.

Calvert, Brendan, Olsen, Alex, Philippa, Bronson, and Rahimi Azghadi, Mostafa (2019) Autoweed: detecting Harrisia cactus in the Goondiwindi region for selective spot-spraying. In: https://www.wsq.org.au/downloads/2019-pest-animal-and-weed-symposium-proceedings/. pp. 52-57. From: PAWS 2019: 1st Queensland Pest Animal and Weed Symposium, 20-23 May 2019, Gold Coast, QLD, Australia.

Chang, Jiaming, Du, Yang, Chen, Xiaoyang, Lim, Eng Gee, and Yan, Ke (2019) Forecasting based virtual inertia control of PV systems for islanded micro-grid. In: Proceedings of the 29th Australasian Universities Power Engineering Conference. 9084532. From: AUPEC 2019: 29th Australasian Universities Power Engineering Conference,, 26-29 May 20219, Nadi, Fiji.

Chen, Xiaoyang, Du, Yang, Lim, Enggee, Wen, Huiqing, and Jiang, Lin (2019) Sensor network based PV power nowcasting with spatio-temporal preselection for grid-friendly control. Applied Energy, 255. 113760.

Chen, Huai, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Li, Ming (2019) An experimental study on the effect of salt spray testing on the optical properties of solar selective absorber coatings produced with different manufacturing technologies. International Journal of Energy and Environmental Engineering, 10 (2). pp. 231-242.

Carter, Adrian, Richards, Linda J., Apthorp, Deborah, Rahimiazghadi, Mostafa, Badcock, David R., Balleine, Bernard, Bekkers, John M., Berk, Michael, Bourne, James A., Bradley, Andrew P., Breakspear, Michael, Brichta, Alan, Carter, Olivia, Castles, Anne, Chakli, Khaled, Cohen-Woods, Sarah, Conn, Simon J., Cornish, Jennifer, Cornish, Kim, de Zubicaray, Greg, Egan, Gary F., Enticott, Peter G., Fitzgibbon, Bernadette M., Forlini, Cynthia, Fornito, Alex, Griffiths, Lyn, Gullifer, Judith, Hall, Wayne, Halliday, Glenda, Hannan, Anthony J., Harrer, Stefan, Harvey, Alan, Hatherly, Chris, Hickie, Ian B., Kennett, Jeanette, Kiernan, Matthew, Kilpatrick, Trevor, Kiral-Kornek, Isabell, Korgaonkar, Mayuresh S., Lawrence, Andrew J., Leventer, Rick, Levy, Neil, Licinio, Julio, Lovell, Nigel, Mackellar, Geoff, Malcolm, Lynne, Mason, Alice, Mattingley, Jason B., Medland, Sarah E., Michie, Patricia T., Nithianantharajah, Jess, Parker, John, Payne, Jonathan M., Poole-Warren, Laura, Sah, Pankaj, Sarnyai, Zoltan, Schofield, Peter R., Shimoni, Olga, Shum, David H.K., Silk, Tim, Slee, Mark, Smith, Ashleigh E., Soulis, Tina, Sriram, Sharath, Stuart, Greg J., Tapson, Jonathan, Thompson, Matthew B., van Schaik, André, Vincent, Nicole A., Vissel, Bryce, and Waters, Allison (2019) A neuroethics framework for the Australian Brain Initiative. Neuron, 101 (3). pp. 365-369.

Cui, Chen, Xiang, Wei, Wang, Zhenyong, and Guo, Qing (2018) Polar codes with the unequal error protection property. Computer Communications, 123. pp. 116-125.

Claxton, C., Rodman, D., and Sheehan, M. (2018) Influence of ethanol and sulphite dosing on oxygen scavenging in sugar mill boiler feedwater. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 333-341. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

Chen, Jiaxuan, Wang, Zhaocheng, Xiang, Wei, and Chen, Sheng (2018) Outage probability region and optimal power allocation for uplink SCMA systems. IEEE Transactions on Communications, 66 (10). pp. 4965-4980.

Cheng, Ying, Lu, Shaofeng, Du, Yang, and Lim, Eng Gee (2017) Introducing online quizzes into lab-based teaching in university. International Journal of Information and Education Technology, 7 (8). pp. 571-574.

Chen, Xiaoyang, Du, Yang, Xiao, Weidong, and Lu, Shaofeng (2017) Power ramp-rate control based on power forecasting for PV grid-tied systems with minimum energy storage. In: Proceedings of the 43rd Annual Conference of the IEEE Industrial Electronics Society. pp. 2647-2652. From: IECON 2017: 43rd Annual Conference of the IEEE Industrial Electronics Society, 29 October - 1 November 2017, Beijing, China.

Cao, Feng-Feng, Yu, Qi-Yue, Xiang, Wei, and Meng, Wei-Xiao (2016) BER analysis of physical-layer network coding in the AWGN channel with burst pulses. IEEE Access, 4. pp. 9958-9968.

Cao, X.-X., Lu, X.-G., Zhang, Z.-S., Zou, Y.-C., and Sun, G.-Z. (2013) Research progress on the design of constructed wetlands. Wetland Science, 11 (1). pp. 121-128.

Carvalho, T., Antunes, E., Calado, J., Figueiredo, F.M., and Frade, J.R. (2012) Lanthanum oxide as a scavenging agent for zirconia electrolytes. Solid State Ionics, 225. pp. 484-487.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2012) Optimal identification of groundwater pollution sources using feedback monitoring information: a case study. Environmental Forensics, 13 (2). pp. 140-153.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2011) Optimisation approach for pollution source identification in groundwater: an overview. International of Environment and Waste Management, 8 (1-2). pp. 40-61.

Cheng, Xinjian, Liu, Ruilan, and He, Yinghe (2010) A simple method for the preparation of monodisperse protein-loaded microspheres with high encapsulation efficiencies. European Journal of Pharmaceutics and Biopharmaceutics, 76 (3). pp. 336-341.

Chadalavada, Sreenivasulu, Datta, Bithin, and Naidu, Ravi (2010) Uncertainty based optimal monitoring network design for a chlorinated hydrocarbon contaminated site. Environmental Monitoring and Assessment, 173 (1-4). pp. 929-940.

Choopani, Saeed, Kayhan, Neda, Sharbati, Ali, and Jacob, Mohan V. (2009) Microwave characteristics of Nanocrytalline NBT Powder in polymeric matrix. In: Proceedings of 12th International Symposium on Microwave and Optical Technology. pp. 1393-1396. From: 12th International Symposium on Microwave and Optical Technology, 16 - 19 December 2009, New Delhi, India.

Chadalavada, Sreenivasulu, and Datta, Bithin (2007) Dynamic optimal monitoring network design for transient transport of pollutants in groundwater aquifers. Water Resources Management, 22 (6). pp. 651-670.

Curiac, Daniel-Ioan, Volosencu, Constantin, Doboli, Alex, Dranga, Octavian, and Bednarz, Tomasz (2007) Discovery of malicious nodes in wireless sensor networks using neural predictors. WSEAS Transactions on Computers Research, 2 (1). pp. 38-43.

Curiac, Daniel, Volosencu, Constantin, Doboli, Alex, Dranga, Octavian, and Bednarz, Tomasz (2007) Neural network based approach for malicious node detection in wireless sensor networks. In: Proceedings of the WSEAS International Conference on Circuits, Systems, Signal and Telecommunications. pp. 8-13. From: 2007 WSEAS International Conference on Circuits, Systems, Signal and Telecommunications, 17-19 January 2007, Gold Coast, QLD, Australia..

Campbell, G.R., Leong, Y.K., Berndt, C.C., and Liow, J.L. (2006) Ammonium phosphate slurry rheology and particle properties - The influence of Fe(III) and A(III) impurities, solid concentration and degree of neutralization. Chemical Engineering Science, 61 (17). pp. 5856-5866.

Campbell, Graeme R., Leong, Yee-Kwong, and Yeow, Y. Leong (2005) Obtaining the shear stress shear rate relationship and yield stress of liquid foods from parallel disk data. Journal of Food Science, 70 (1). pp. 50-55.

Cole, D.E., and Liow, J-L. (2005) High-framing rate PIV for vortex ring visualisation. In: Proceedings of the Fourth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion. pp. 25-28. From: Fourth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 7-9 December 2005, McLaren Vale, SA, Australia.

Cole, D.E., and Liow, J.V. (2005) Microbubble formation and entrapment from liquid-liquid impacts. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Cole, D.E., and Liow, J.V. (2004) Bubble entrapment during water drop impacts. In: Proceedings of the 15th Australasian Fluid Mechanics Conference. From: 15th Australasian Fluid Mechanics Conference, 13 - 17 December 2004, Sydney, NSW, Australia.

Cox, Peter, Fisher, Ian, Kastl, George, Jegatheesan, Veeriah, Warnecke, Malcolm, Angles, Mark, Bustamante, Heri, Chiffings, Tony, and Hawkins, Peter R. (2003) Sydney 1998: lessons from a drinking water crisis. Journal American Water Works Association, 95 (5). pp. 147-161.

Carthew, Matthew, Jegatheesan, Veeriah, and Fracchia, Henry (2003) Network modelling for Townsville distribution system. In: Papers from OzWater, AWA 20th Convention. pp. 1-15. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Crossman, David J., Choat, J. Howard, Clements, Kendall D., Hardy, Tom, and McConochie, Jason (2001) Detritus as food for grazing fishes on coral reefs. Limnology and Oceanography, 46 (7). pp. 1596-1605.

Chandramalar, A.V.M., Kua, S.K., Chan, C.Y., Lim, Y.Y., and Leong, Y.K. (2000) Flow behaviour of titanium dioxide dispersions in the presence of 2-hydroxyethyl cellulose. Colloid and Polymer Science, 278 (5). pp. 485-489.

Ceremuga, Janina, Leong, Kenneth, and Grabovickic, Robert (1996) Characterisation of high temperature superconducting films using a sapphire resonator and fitting procedures for calculations of the Q-Factor. In: Proceedings of the 11th International Microwave Conference MIKON 96. From: 11th International Microwave Conference MICON 96, 27-30 May 1996, Warsaw, Poland.

Ceremuga, Janina, and Krupka, Jerzy (1996) Dielectric resonators for microwave characterization of high-temperature superconductors. In: Proceedings of SPIE: Oxide Superconductor Physics and Nano-Engineering II (2697) pp. 77-86. From: Oxide Superconductor Physics and Nano-Engineering II, 30 January - 2 February 1996, San Jose, CA, USA.

Ceremuga, Janina, Krupka, Jerzy, Geyer, Richard, and Modelski, Józef (1995) Influence of films' thickness and air gaps in surface impedance measurements of high temperature super-conductors using the dielectric resonator technique. IEICE Transactions on Electronics, E78-C (8). pp. 1106-1110.

Ceremuga, Janina, Krupka, Jerzy, and Kościuk, Tomasz (1995) Resonant measurements of surface resistance of high-T(c) superconducting films: how good or bad are they? Journal of Superconductivity, 8 (6). pp. 681-689.

Ceremuga, Janina (1995) Review of recent developments in microwave research in Australia. IEICE Transactions on Electronics, E78-C (8). pp. 902-906.

Ceremuga, Janina E., and Allen, Gregory H. (1994) Simulation of surface resistance of high temperature YBa2Cu3O7 multilayers for multichip modules. Physica C: Superconductivity, 235-240 (Part 5). pp. 3367-3368.

Ceremuga, Janina, Barton, Michael, and Miranda, Felix (1994) Analysis of influence of buffer layers on microwave propagation through high-temperature superconducting thin films. Superconductor Science & Technology, 7 (11). pp. 855-867.

Ceremuga-Mazierska, Janina (1992) Transmission of microwave signals through superconducting thin films in waveguides. Superconductor Science & Technology, 5 (6). pp. 391-397.

Cole, David (2007) The splashing morphology of liquid-liquid impacts. PhD thesis, James Cook University.

D

Dong, Liqiang, Lin, Wenxian, Armfield, Steven W., Kirkpatrick, Michael P., Williamson, Nicholas, and Khatamifar, Mehdi (2022) Direct numerical simulation of “fountain filling box” flow with a confined weak laminar plane fountain. Heat Transfer. (In Press)

Di Bella, Brody, Khatamifar, Mehdi, and Lin, Wenxian (2022) Experimental study of flow visualisation using fluorescent dye. Flow Measurement and Instrumentation, 87. 102231. (In Press)

Dada, Tewodros Kassa, Sheehan, Madoc, Murugavelh, S., and Antunes, Elsa (2022) A review on catalytic pyrolysis for high-quality bio-oil production from biomass. Biomass Conversion and Biorefinery. (In Press)

Dharma Patria, Raffel, Rehman, Shazia, Vuppaladadiyam, Arun K., Wang, Huaimin, Lin, Carol Sze Ki, Antunes, Elsa, and Leu, Shao-Yuan (2022) Bioconversion of food and lignocellulosic wastes employing sugar platform: A review of enzymatic hydrolysis and kinetics. Bioresource Technology, 352. 127083.

Dada, Tewodros Kassa, Islam, Md Anwarul, Duan, Alex Xiaofei, and Antunes, Elsa (2022) Catalytic co-pyrolysis of ironbark and waste cooking oil using X-strontium /Y-zeolite (X= Ni, Cu, Zn, Ag, and Fe). Journal of the Energy Institute, 104. pp. 89-97.

Dada, Tewodros Kassa, Islam, Md Anwarul, Kumar, Ravinder, Scott, Jason, and Antunes, Elsa (2022) Catalytic co-pyrolysis of ironbark and waste cooking oil using strontium oxide-modified Y-zeolite for high-quality bio-oil production. Chemical Engineering Journal, 450 (4). 138448.

Danish, Aamar, Mosaberpanah, Mohammad Ali, Tuladhar, Rabin, Salim, Muhammad Usama, Yaqub, Muhammad Arslan, and Ahmad, Naveed (2022) Effect of cenospheres on the engineering properties of lightweight cementitious composites: a comprehensive review. Journal of Building Engineering, 49. 104016.

Dong, Xuening, Amirsoleimani, Amirali, Azghadi, Mostafa Rahimi, and Genov, Roman (2022) In-Memory Memristive Transformation Stage of Gaussian Random Number Generator. In: Proceedings of the IEEE International Conference on Omni-Layer Intelligent Systems. From: COINS 2022: IEEE International Conference on Omni-layer Intelligent Systems, 1-3 August 2022, Barcelona, Spain.

Dada, Tewodros Kassa, Vuppaladadiyam, Arun, Duan, Alex Xiaofei, Kumar, Ravinder, and Antunes, Elsa (2022) Probing the effect of Cu-SrO loading on catalyst supports (ZSM-5, Y-zeolite, activated carbon, Al2O3, and ZrO2) for aromatics production during catalytic co-pyrolysis of biomass and waste cooking oil. Bioresource Technology, 360. 127515.

Dos Santos Antunes, Elsa, Vuppaladadiyam, Arun, Kumar, Ravinder, Vuppaladadiyam, Varsha, Sarmah, Ajit, Islam, Md Anwarul, and Dada, Tewodros Kassa (2022) A circular economy approach for phosphorus removal using algae biochar. Cleaner and Circular Bioeconomy, 1. 100005.

Dong, Liqiang, Lin, Wenxian, and Khatamifar, Mehdi (2021) Experimental study on the intrusion and stratification produced by confined laminar and turbulent round fountains. International Journal of Heat and Fluid Flow, 89. 108785. pp. 1-26.

Dong, Liqiang, Lin, Wenxian, and Khatamifar, Mehdi (2021) Direct numerical simulation of confined weak round fountains in homogeneous ambient. Case Studies in Thermal Engineering, 28. 101528.

Dastjerdi, Behnam Hossein, Strezov, Vladimir, Kumar, Ravinder, and Behnia, Masud (2021) Economic feasibility and sustainability assessment of residual municipal solid waste management scenarios in NSW, Australia. Sustainability, 13 (16). p. 8972.

Doyle, Tobias, Wheatley, Greg, Masoudi Nejad, Reza, and Sina, Nima (2021) Fatigue reliability assessment of the new design of universal upright for the JCU Formula SAE car. Structures, 34. pp. 4113-4123.

Datta, Bithin, Roy, Dilip Kumar, Kelley, Jonathan J., and Bradley, Stevens (2021) Prediction of impending drought scenarios based on surface and subsurface parameters in a selected region of tropical Queensland, Australia. Journal of Water Resource and Protection, 13 (8). pp. 605-631.

Drane, Kezia, Huerlimann, Roger, Power, Michelle, Whelan, Anna, Ariel, Ellen, Sheehan, Madoc, and Kinobe, Robert (2021) Testudines as sentinels for monitoring the dissemination of antibiotic resistance in marine environments: an integrative review. Antibiotics, 10 (7). 775.

Dada, Tewodros Kassa, Islam, Md Anwarul, Vuppaladadiyam, Arun K., and Antunes, Elsa (2021) Thermo-catalytic co-pyrolysis of ironbark sawdust and plastic waste over strontium loaded hierarchical Y-zeolite. Journal of Environmental Management, 299. 113610.

Drane, Kezia, Huerlimann, Roger, Power, Michelle, Ariel, Ellen, Sheehan, Madoc, and Kinobe, Robert (2021) Using Green sea turtles (Chelonia mydas) as essential bio-indicators for monitoring antibiotic resistance in marine environments worldwide: a critical appraisal. FASEB Journal, 35 (S1). 03303-03303.

Dong, Xiequn, Li, Xuehua, Yue, Xinwei, and Xiang, Wei (2020) Performance analysis of cooperative NOMA based intelligent mobile edge computing system. China Communications, 17 (8). 9190129. pp. 45-57.

Dewey, Justin, Tuladhar, Rabin, and Sivakugan, Nagaratnam (2019) Experimental study on the performance of notched round timber sections. Journal of Building Engineering, 25. 100840.

Darwen, Paul J. (2019) The varying success of Bayesian model averaging: an empirical study of flood prediction. In: Proceedings of the IEEE Symposium Series on Computational Intelligence. pp. 1764-1771. From: SSCI 2018: IEEE Symposium Series on Computational Intelligence, 18-21 November 2018, Bengalaru, India.

Dewey, Justin, Burry, Michael, Tuladhar, Rabin, Sivakugan, Siva, Pandey, Govinda, and Stephenson, Daniel (2018) Strengthening and rehabilitation of deteriorated timber bridge girders. Construction and Building Materials, 185. pp. 302-309.

Dewey, Justin, Tuladhar, Rabin, and Sivakugan, Siva (2018) Review of design methods for round notched timber sections subjected to flexure and shear. Journal of Building Engineering, 18. pp. 130-141.

Das, Braja M., and Sivakugan, Nagaratnam (2018) Principles of Foundation Engineering. Cengage Learning, Boston, MA, USA.

Dewey, Justin, and Tuladhar, Rabin (2017) Behaviour of round notched timber sections. In: 8th Australian Small Bridges Conference. From: 8th Australian Small Bridges Conference, 27-28 November 2017, Gold Coast, QLD, Australia.

Dewey, Justin, Tuladhar, Rabin, Mullamphy, Lara, and McCormack, Lucy (2017) Effects of notching on timber girder performance. In: [Presented at the 3rd International Conference on Timber Bridges]. From: ICTB 2017: 3rd International Conference on Timber Bridges, 26-29 June 2017, Skelleftea, Sweden.

Das, Braja M., and Sivakugan, Nagaratnam (2017) Fundamentals of Geotechnical Engineering. Cengage Learning, Boston, MA, USA.

Datta, Bithin, Petit, Claire, Palliser, Marine, K. Esfahani, Hamed, and Prakash, Om (2017) Linking a simulated annealing based optimization model with PHT3D simulation model for chemically reactuve transport processes to optimally characterize unknown contaminant sources in a former mine site in Australia. Journal of Water Resource and Protection, 9 (5). 75533. pp. 432-454.

Datta, Bithin, Amirabdollahian, Mahsa, Zuo, Renguang, and Prakash, Om (2016) Groundwater contamination plume delineation using local singularity mapping technique. International Journal of GEOMATE, 11 (25). pp. 2435-2441.

Datta, Bithin, Durand, Frederic, Laforge, Solemne, Prakash, Om, Esfahani, Hamed K., Chadalavada, Sreenivasulu, and Naidu, Ravi (2016) Preliminary hydrogeological modeling and optimal monitoring network design for a contaminated abandoned mine site area: application of developed monitoring network design software. Journal of Water Resource and Protection, 8 (1). pp. 46-64.

Das, Braja M., and Sivakugan, Nagaratnam (2016) Introduction to Geotechnical Engineering. Cengage, Boston, MA, USA.

Datta, Bithin, and Singh, Deepesh (2014) Optimal groundwater monitoring network design for pollution plume estimation with active sources. International Journal of Geomate, 6 (2). pp. 864-869.

Ding, Xiang, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Li, Ming (2013) Study on operational performance of a solar water heater hanged on the balcony wall under different inclinations in summer. Acta Energiae Solaris Sinica, 34 (11). pp. 1895-1902.

Datta, Bithin, Prakash, Om, Campbell, Sean, and Escalada, Gerry (2013) Efficient identification of unknown groundwater pollution sources using linked simulation-optimization incorporating monitoring location impact factor and frequency factor. Water Resources Management, 27 (14). pp. 4959-4976.

Disfani, M.M., Arulrajah, A., Bo, M.W., and Sivakugan, N. (2012) Environmental risks of using recycled crushed glass in road applications. Journal of Cleaner Production, 20 (1). pp. 170-179.

Ding, Xiang, Xu, Ling, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2012) Research progress in the numerical simulation to the manufacturing of GaN-based materials. Journal of Yunnan Normal University, 32 (1). pp. 25-30.

Das, B.M., and Sivakugan, N. (2011) Maximum and minimum void ratios and median grain size of granular soils: their importance and correlations with material properties. In: Porceeding of the International Conference on Advances in Geotechnical Engineering. pp. 59-73. From: ICAGE 2011 International Conference on Advances in Geotechnical Engineering, 7-9 November 2011, Perth, WA, Australia.

Das, Sarat Kumar, Samui, Pijush, Kim, Dookie, Sivakugan, N., and Biswal, Rajanikanta (2011) Lateral displacement of liquefaction induced ground using least square support vector machine. International Journal of Geotechnical Earthquake Engineering, 2 (2). pp. 29-39.

Ding, Xiang, Gao, Wenfeng, Liu, Tao, and Lin, Wenxian (2011) Thermal performance of solar water heater hanged on balcony wall with separate pressure bearing. Transactions of the CSAE (Chinese Society of Agricultural Engineering), 27 (10). pp. 233-237.

Das, Sarat Kumar, Biswal, Rajani Kanta, Sivakugan, N., and Das, Bitanjaya (2011) Classification of slopes and prediction of factor of safety using differential evolution neural networks. Environmental Earth Sciences, 64 (1). pp. 201-210.

Ding, Xiang, Lin, Wenxian, Xu, Ling, Gao, Wenfeng, and Liu, Tao (2011) The research and applications of heat-pipe-type evacuated tubes and solar collectors. Journal of Yunnan Normal University, 31 (4). pp. 41-49.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2011) Identification of unknown groundwater pollution sources using classical optimization with linked simulation. Journal of Hydro-Environment Research, 5 (1). pp. 25-36.

Datta, Bithin, and Dhar, Anirban (2011) Density dependent flows, saltwater intrusion and management. In: Aral, Mustafa M., and Taylor, Stewart W., (eds.) Groundwater Quantity and Quality Management. American Society of Civil Engineers, Reston, Virginia, USA, pp. 394-429.

Das, Sarat Kumar, Samui, Pijush, Khan, Shakilu Zama, and Sivakugan, Nagarathnam (2011) Machine learning techniques applied to prediction of residual strength of clay. Central European Journal of Geosciences, 3 (4). pp. 449-461.

Das, Braja M., and Sivakugan, Nagaratnam (2011) Vibrations of foundations. In: Das, Braja M., (ed.) Geotechnical Engineering Handbook. J. Ross Publishing, Fort Lauderdale, FL, USA, 11.1-11.30.

Das, Sarat Kumar, and Sivakugan, Nagaratnam (2010) Discussion of "Intelligent computing for modelling axial capacity of pile foundations". Canadian Geotechnical Journal, 47 (8). pp. 928-930.

de Vasconcellos, João Flávio Vieira, Singh, Shailesh, and Sivakugan, Nagaratnam (2010) Sensitivity analysis of time dependent settlements in hydraulic fills. Geotechnical and Geological Engineering, 28 (4). pp. 351-360.

Dhar, Anirban, and Datta, Bithin (2010) Logic-based design of groundwater monitoring network for redundancy reduction. Journal of Water Resources Planning and Management, 136 (1). pp. 88-94.

Dombrowski, Richard D., Litster, James D., Wagner, Norman J., and He, Yinghe (2010) Modeling the crystallization of proteins and small organic molecules in nanoliter drops. AIChE Journal, 56 (1). pp. 79-91.

Dhar, Anirban, and Datta, Bithin (2009) Saltwater intrusion management of coastal aquifers I: linked simulation-optimization. Journal of Hydrologic Engineering, 14 (12). pp. 1263-1272.

Dhar, Anirban , and Datta, Bithin (2009) Saltwater intrusion management of coastal aquifers. II: operation uncertainty and monitoring. Journal of Hydrologic Engineering, 14 (12). pp. 1273-1282.

Dhar, Anirban, and Datta, Bithin (2009) Global optimal design of ground water monitoring network using embedded kriging. Ground Water, 47 (6). pp. 806-815.

Datta, Bithin, Vennalakanti, Harikrishna, and Dhar, Anirban (2009) Modeling and control of saltwater intrusion in a coastal aquifer of Andhra Pradesh, India. Journal of Hydro-Environment Research, 3 (3). pp. 148-159.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2009) Simultaneous identification of unknown groundwater pollution sources and estimation of aquifer parameters. Journal of Hydrology, 376 (1-2). pp. 48-57.

Datta, Bithin, Chakrabarty, Dibakar, and Dhar, Anirban (2009) Optimal dynamic monitoring network design and identification of unknown groundwater pollution sources. Water Resources Management, 23 (10). pp. 2031-2049.

Deb, Kousik, Sivakugan, N., Chandra, Sarvesh, and Basudhar, P.K. (2007) Numerical analysis of multi layer geosynthetic-reinforced granular bed over soft fill. Geotechnical and Geological Engineering, 25 (6). pp. 639-646.

Das, Braja, and Sivakugan, Siva (2007) Settlements of shallow foundations on granular soils - an overview. International Journal of Geotechnical Engineering, 1 (1). pp. 19-29.

Dombrowski, Richard D., Litster, James D., Wagner, Norman J., and He, Yinghe (2007) Crystallization of alpha-lactose monohydrate in a drop-based microfluidic crystallizer. Chemical Engineering Science, 62 (17). pp. 4802-4810.

Denyer, P., Shu, L., and Jegatheesan, J. (2007) Evidence of changes in membrane pore characteristics due to filtration of dye bath liquors. Desalination, 204 (1-3). pp. 296-306.

Dao, Vinh, Dux, Peter, and Morris, Peter (2007) Effectiveness of permeability-reducing admixtures in marine concrete. In: Proceedings of Concrete under severe conditions - environment and loading CONSEC'07 (1) pp. 449-456. From: 5th International conference on concrete under severe conditions of environment and loading, 4-6 June 2007, Tours, France.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Ab initio studies of hydrogen desorption from low index magnesium hydride surface. Surface Science, 600 (9). pp. 1854-1859.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Catalytic effects of subsurface carbon in the chemisorption of hydrogen on a Mg(0001) surface: an ab-initio study. Journal of Physical Chemistry Part B , 110 (4). pp. 1814-1819.

Du, A.J., Smith, Sean C., Yao, X.D., He, Y., and Lu, G.Q. (2006) Atomic hydrogen diffusion in novel magnesium nanostructures: the impact of incorporated subsurface carbon atoms. Journal of Physics: conference series, 29. pp. 167-172.

Dan, N.P., Visvanathan, C., Ben Aim, R., and Jegatheesan, V. (2006) Comparative study on the performance of yeast and bacterial membrane bioreactors for high salinity wastewater treatment. International Journal of Environmental Technology and Management, 6 (6). pp. 612-630.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) First-principle study of adsorption of hydrogen on Ti-doped Mg (0001) surface. Journal of Physical Chemistry Part B, 110 (43). pp. 21747-21750.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2005) The role of Ti as a catalyst for the dissociation of hydrogen on a Mg(0001) surface. Journal of Physical Chemistry Part B, 109 (38). pp. 18037-18041.

Duan, M. (2005) Adaptive hybrid/mixed finite element analysis of singular problems. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 95-100. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Duan, Mei, and Loughran, Jeffrey G. (2005) Application of a dewatering model for fibroporous media under constrained uniaxial compression. Journal of Porous Media, 8 (5). pp. 431-442.

Duan, M., and Loughran, J.G. (2005) Heuristic model for the permeability of a saturated fibro porous media with application to prepared sugar cane. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 131-136. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Dombrowski, Richard D., Wagner, Norman J., He, Yinghe, and Litster, James D. (2005) Particle production in monodisperse emulsions. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Duan, M. (2004) An efficient hybrid/mixed element for geometrically non linear analysis of plate and shell structures. Computational Mechanics, 35 (1). pp. 72-84.

Duan, Mei (2004) Splitting behaviour analysis of steel cladding systems. Key Engineering Materials, 274-276. pp. 151-156.

Duan, Mei, and Loughran, Jeffrey G. (2004) A constitutive modelling analysis for deformation of prepared sugar cane. Key Engineering Materials, 274-276. pp. 271-276.

de Silva Samarasinghe, J.R., Bode, L., and Mason, L.B. (2003) Modelled response of Gulf St Vincent (South Australia) to evaporation, heating and winds. Continental Shelf Research, 23 (14). pp. 1285-1313.

Duan, M. (2003) Finite element analysis of a laminated timber bridge. In: Poceedings of the 10th Asia-Pacific Vibration Conference (1) pp. 104-108. From: 10th Asia Pacific Vibration Conference, 12-14 November 2003, Gold Coast, QLD, Australia.

Daniels, P.G., and Patterson, J.C. (2001) On the short-wave instability of natural convection boundary layers. Proceedings of the Royal Society of London Series A, Mathematical, Physical and Engineering Sciences, 457. pp. 519-538.

Downing, C.M., and McBain, G.D. (2000) Towards understanding the pressure dependence of hygroscopic water. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists (22) pp. 361-367. From: ASSCT 2000: 22nd Annual Conference of the Australian Society of Sugar Cane Technologists, 2-5 May 2000, Bundaberg, QLD, Australia.

Devietti, Jenna Leigh (2011) Modelling water quality in tropical water distribution systems. PhD thesis, James Cook University.

E

El Kamash, Walid, El Naggar, Hany, and Nagaratnam, Sivakugan (2022) Novel adaptation of Marston's stress solution for inclined backfilled stope. Alexandria Engineering Journal, 61 (10). pp. 8221-8239.

El Kamash, Walid, El Naggar, Hany, and Nagaratnam, Sivakugan (2021) Numerical analysis of lateral earth pressure coefficient in inclined mine stopes. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 7 (3). 61.

Eshraghain, Jason K., Lammie, Corey, and Rahimi Azghadi, Mostafa (2020) Biologically plausible contrast detection using a memristor array. In: Proceedings of the 2020 IEEE International Symposium on Circuits and Systems. From: ISCAS: 2020 IEEE International Symposium on Circuits and Systems, 10-21 October 2020, Seville, Spain.

Esfahani, Hamed K., and Datta, Bithin (2018) Fractal singularity-based multiobjective monitoring networks for reactive species contaminant source characterization. Journal of Water Resources Planning and Management, 144 (6).

Elbourne-Binns, Laura, Baena, Juan Carlos, Yin, Ling, and Peng, Zhongxiao (2017) Lubricated wear of machinable lithium disilicate glass ceramic. Key Engineering Materials, 739. pp. 18-22.

Esfahani, Hamed K., and Datta, Bithin (2016) Linked optimal reactive contaminant source characterization in contaminated mine sites: case study. Journal of Water Resources Planning and Management, 142 (12). 04016061. pp. 1-14.

Everingham, Yvette L., Stoeckl, Natalie E., Cusack, Justin, and Osborne, John A. (2012) Quantifying the benefits of a long-lead ENSO prediction model to enhance harvest management: a case study for the Herbert sugarcane growing region, Australia. International Journal of Climatology, 32 (7). pp. 1069-1076.

Easton, Christopher D., and Jacob, Mohan V. (2010) Solubility and adhesion characteristics of plasma polymerized thin films derived from lavandula angustifolia essential oil. Journal of Applied Polymer Science, 115 (1). pp. 404-415.

Easton, Christopher D., Jacob, Mohan V., Shanks, Robert A., and Bowden, Bruce F. (2009) Surface and chemical characterization of PolyLA thin films fabricated using plasma polymerization. Chemical Vapor Deposition, 15 (7). pp. 179-185.

Easton, Christopher D., Jacob, Mohan V., and Shanks, Robert A. (2009) Fabrication and characterisation of polymer thin-films derived from cineole using radio frequency plasma polymerisation. Polymer, 50 (15). pp. 3465-3469.

Easton, C.D., and Jacob, M.V. (2009) Optical characterisation of radio frequency plasma polymerised Lavandula angustifolia essential oil thin films. Thin Solid Films, 517 (15). pp. 4402-4407.

Easton, C.D., and Jacob, M.V. (2009) Ageing and thermal degradation of plasma polymerised thin films derived from Lavandula angustifolia essential oil. Polymer Degradation and Stability, 94 (4). pp. 597-603.

Ebersbach, Stephan, and Peng, Zhongxiao (2008) Expert system development for vibration analysis in machine condition monitoring. Expert Systems with Applications, 34 (1). pp. 291-299.

Easton, C.D., Jacob, M.V., and Krupka, J. (2007) Non-destructive complex permittivity measurement of low permittivity thin film materials. Measurement Science and Technology, 18 (9). pp. 2869-2877.

Ebersbach, Stephan, Peng, Zhongxiao, and Kessissoglou, Nicole (2007) Smart condition monitoring by intergration of vibration, oil and wear particle analysis. In: Proceedings of the 14th International Congress on Sound and Vibration 2007. pp. 1-9. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ebersbach, S., Peng, Z., and Kessissoglou, N.J. (2006) The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques. Wear, 260 (1-2). pp. 16-24.

Ebersbach, Stephan, and Peng, Zhongxiao (2005) The development of a comprehensive machine condition monitoring program. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring. pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Ebersbach, Stephan (2007) Artificial intelligent system for integrated wear debris and vibration analysis in machine condition monitoring. PhD thesis, James Cook University.

F

Fan, Liyuan, Li, Chao'en, van Biert, Lindert, Zhou, Shou-Han, Tabish, Asif Nadeem, Mokhov, Anatoli, Aravind, Purushothaman Vellayani, and Cai, Weiwei (2022) Advances on methane reforming in solid oxide fuel cells. Renewable and Sustainable Energy Reviews, 166. 112646.

Franks, Jordan, Wheatley, Greg, Zamani, Pedram, Nejad, Reza Masoudi, Macek, Wojciech, Branco, Ricardo, and Samadi, Farzaneh (2022) Fatigue life improvement using low transformation temperature weld material with measurement of residual stress. International Journal of Fatigue, 164. 107137.

Fan, Liyuan, Li, Chao'en, Aravind, Purushothaman Vellayani, Cai, Weiwei, Han, Minfang, and Brandon, Nigel (2022) Methane reforming in solid oxide fuel cells: challenges and strategies. Journal of Power Sources, 538. 231573.

Fu, Yanfang, Du, Yishuai, Cao, Zijian, Li, Qiang, and Xiang, Wei (2022) A deep learning model for network intrusion detection with imbalanced data. Electronics, 11 (6). 898.

Faheem, Hafiz Hamza, Abbas, Syed Zaheer, Tabish, Asif Nadeem, Fan, Liyuan, and Maqbool, Fahad (2022) A review on mathematical modelling of Direct Internal Reforming- Solid Oxide Fuel Cells. Journal of Power Sources, 520. 230857.

Fan, Liyuan, Mokhov, Anatoli, Saadabadi, S. Ali, Brandon, Nigel, and Aravind, Purushothaman Vellayani (2021) Methane steam reforming reaction in solid oxide fuel cells: influence of electrochemical reaction and anode thickness. Journal of Power Sources, 507. 230276.

Fang, Juan, Li, Kai, Hu, Juntao, Xu, Xiaobin, Teng, Ziyi, and Xiang, Wei (2021) SAP: An IoT Application Module Placement Strategy Based on Simulated Annealing Algorithm in Edge-Cloud Computing. Journal of Sensors, 2021. 4758677.

Farooq, Muhammad Umar, Mujtaba, Hassan, Farooq, Khalid, Sivakugan, Nagaratnam, and Das, Braja M. (2020) Evaluation of stability and erosion characteristics of soil embankment slope reinforced with different natural additives. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44. pp. 515-524.

Fan, Shiwen, Xiao, Yue, Yang, Ping, Dan, Lilin, and Xiang, Wei (2019) Approximate message passing detector based upon probability sorting for large-scale GSM systems. IEEE Transactions on Vehicular Technology, 68 (9). pp. 9303-9307.

Fan, Xiao-Li, Huo, Yuan-Fang, Li, Chang-Yang, Kannan, M. Bobby, Chen, Xiao-Bo, Guan, Shao-Kang, Zeng, Rong-Chang, and Ma, Quan-Li (2019) Corrosion resistance of nanostructured magnesium hydroxide coating on magnesium alloy AZ31: influence of EDTA. Rare Metals, 38 (6). pp. 520-531.

Fernandes, Alvaro, Brabandt, Joerg, Posdziech, Oliver, Saadabadi, Ali, Recalde, Mayra, Fan, Liyuan, Promes, Eva O., Liu, Ming, Woudstra, Theo, and Aravind, Purushothaman Vellayan (2018) Design, construction, and testing of a gasifier-specific solid oxide fuel cell system. Energies, 11 (8). 1985.

Ferraris, Michael D., Van, Thuy Chu, Garaniya, Vikram, Ristovski, Zoran, Situ, Rong, and Brown, Richard J. (2017) The investigation of marine ship engine emission behaviour using numerical simulations. In: Proceedings of the Australasian Coasts & Ports 2017 Conference. pp. 985-991. From: Australasian Coasts & Ports 2017 Conference: working with nature, 21-23 June 2017, Cairns, QLD, Australia.

Fan, L., van Biert, L., Thallam Thattai, A., Verkooijen, A.H.M., and Aravind, P.V. (2015) Study of methane steam reforming kinetics in operating solid oxide fuel cells: influence of current density. International Journal of Hydrogen Energy, 40 (15). pp. 5150-5159.

Furyk, Jeremy S., Lawlor, Jenine, Franklin, Richard, O'Kane, Carl, Kault, David, Banks, Colin, and Aitken, Peter (2012) Emergency department presentations during the State of Origin rugby league series: a retrospective statewide analysis. Medical Journal of Australia, 197 (11). pp. 663-666.

Fan, L., Dimitriou, E., Pourqui, M.J.B.M., Liu, M., Verkooijen, A.H.M., and Aravind, P.V. (2011) Prediction of the performance of a solid oxide fuel cell fuelled with biosyngas: Influence of different steam-reforming reaction kinetic parameters. International Journal of Hydrogen Energy, 38 (1). pp. 510-524.

Fabian, C.P., Ridd, M.J., Sheehan, M.E., and Mandin, Ph. (2009) Modeling the charge-transfer resistance to determine the role of guar and activated polyacrylamide in copper electrodeposition. Journal of the Electrochemical Society, 156 (10). pp. 400-407.

Fisher, Ian, Kastl, George, Sathasivan, Arumugam, and Jegatheesan, Veeriah (2009) Comment on “A Variable Rate Coefficient Chlorine Decay Model”. Environmental Science & Technology, 43 (23). p. 9043.

Feng, Y.T., Han, K., Owen, D.R.J., and Loughran, J. (2009) On upscaling of discrete element models: similarity principles. Engineering Computations: international journal for computer-aided engineering and software, 26 (6). pp. 599-609.

Fathi, S.H., Hosseini Aghdam, M.G., Zahedi, A., and Gharehpetian, G.B. (2009) Optimum regulation of DC sources in cascaded multi-level inverters. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 28 (2). pp. 385-395.

Frye, Ulrich, Ginger, John, and Mullins, Peter (2009) Response of cladding to windborne debris impact. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8 -12 November 2009, Taipei, Taiwan.

Fabian, C.P., Ridd, M.J., and Sheehan, M.E. (2007) Assessment of activated polyacrylamide and guar as organic additives in copper electrodeposition. Hydrometallurgy, 86 (1-2). pp. 44-55.

Feng, Y., Han, K., Owen, D.R.J., and Loughran, J. (2007) Upscaling of discrete element models for particle systems. In: Proceedings of Discrete Element Methods 2007. pp. 1-9. From: Discrete Element Methods (DEM) 2007, 27-29 AUG 2007, Brisbane, QLD, Australia.

Fabian, Cesimiro P., Mandin, Philippe, Ridd, Michael, and Sheehan, Madoc (2006) Hydrodynamic modeling of copper electrodeposition at a vertical rotating cylinder electrode. ECS Transactions, 2 (3). pp. 303-315.

Fabian, Cesimiro, Ridd, Michael, and Sheehan, Madoc (2006) Rotating cylinder electrode study of the effect of activated polyacrylamide on surface roughness of electrodeposited copper. Hydrometallurgy, 84 (3-4). pp. 256-263.

Fell, A., Jegatheesan, V., Sadler, A., and Lee, S.H. (2005) Baseline measurement on the performance of four constructed wetlands in tropical Australia. Environmental Engineering Research, 10 (6). pp. 316-327.

Fabian, Cesimiro, Ridd, Michael, Ness, Sharon, Lancaster, Thomas, and Griffin, Gregory (2003) Determination of crystallite size and surface roughness of copper deposits for electrowinning in the presence of an organic additive. In: Hydrometallurgy 2003: Proceedings of the Fifth International Conference in Honor of Professor Ian Ritchie: Electrometallurgy and Environmental Hydrometallurgy (2) pp. 1233-1245. From: Hydrometallurgy 2003 Fifth International Conference in Honor of Professor Ian Ritchie, 24-27 August 2003, Vancouver, BC, Canada.

Fabian, Cesimiro P. (2005) Copper electrodeposition in the presence of guar or activated polyacrylamide. PhD thesis, James Cook University.

G

Gu, Shushi, Yu, Zichao, Zhang, Qingyu, and Huang, Tao (2022) Energy-Aware Coded Transmission Strategy for Hierarchical Cooperative Caching Networks. IEEE Wireless Communications Letters. (In Press)

Gu, Shushi, Sun, Xinyi, Yang, Zhihua, Huang, Tao, Xiang, Wei, and Yu, Keping (2022) Energy-aware coded caching strategy design with resource optimization for satellite-UAV-vehicle integrated networks. IEEE Internet of Things Journal, 9 (8). pp. 5799-5811.

Gulizia, Alexandra M., Brodie, Eve, Daumuller, Renee, Bloom, Sarah B., Corbett, Tayla, Santana, Marina M.F., Motti, Cherie A., and Vamvounis, George (2022) Evaluating the Effect of Chemical Digestion Treatments on Polystyrene Microplastics: Recommended Updates to Chemical Digestion Protocols. Macromolecular Chemistry and Physics, 223. 2100485.

Guertler, M.R., Adams, N., Caldwell, G., Donovan, J., Hopf, A., and Roberts, J. (2022) A Life-Cycle Framework to Manage Collaboration and Knowledge Exchange in Open Organisations. In: Proceedings of the Design Society (2) pp. 181-190. From: DESIGN 2022: 17th International Design Conference, 23-26 May 2022, Zagreb, Croatia.

Grant, Daniel S., Ahmed, Jakaria, Whittle, Jason D., Michelmore, Andrew, Vasilev, Krasimir, Bazaka, Kateryna, and Jacob, Mohan V. (2021) Comparative study of natural terpenoid precursors in reactive plasmas for thin film deposition. Molecules, 26 (16). 4762.

Gu, Shushi, Wang, Fugang, Zhang, Qinyu, Huang, Tao, and Xiang, Wei (2021) Global repair bandwidth cost optimization of generalized regenerating codes in clustered distributed storage systems. IET Communications, 15 (19). pp. 2469-2481.

Guo, Ji-Chong, Yu, Qi-Yue, Meng, Wei-Xiao, and Xiang, Wei (2020) Energy-efficient hybrid precoder with adaptive overlapped subarrays for large-array mmWave systems. IEEE Transactions on Wireless Communications, 19 (3). 19453837. pp. 1484-1502.

Guo, Ji-Chong, Yu, Qi-Yue, Meng, Wei-Xiao, and Xiang, Wei (2020) Ergodic energy efficiency of mmWave system considering insertion loss under dynamic subarray architecture. In: Proceedings of the IEEE Vehicular Technology Conference. 9129395. From: VTC2020-Spring: IEEE 91st Vehicular Technology Conference, 25-28 May 2020, Antwerp, Belgium.

Gan, Ruimeng, Xiao, Yue, Shao, Jinliang, Zhou, Xiaotian, and Xiang, Wei (2020) Optimal energy allocation against denial-of-service attack in cache-enabled wireless networks. In: Proceedings of the IEEE Vehicular Technology Conference. 9129556. From: VTC2020-Spring: IEEE 91st Vehicular Technology Conference, 25-28 May 2020, Antwerp, Belgium.

Gao, Pan, Xiang, Wei, and Liang, Dong (2019) Texture-distortion-constrained joint source-channel coding of multi-view video plus depth-based 3D video. IEEE Transactions on Circuits and Systems for Video Technology, 29 (11). pp. 3326-3340.

Ginger, J.D., Bodhinayake, G.G., and Ingham, S. (2019) Wind loads for designing ground-mounted solar-panel arrays. Australian Journal of Structural Engineering, 20 (3). pp. 204-218.

Grech, Jonathan, and Antunes, Elsa (2019) Zirconia in dental prosthetics: a literature review. Journal of Materials Research and Technology, 8 (5). pp. 4956-4964.

Gummow, Rosalind J., Vamvounis, George, Mathan, M. Bobby, and He, Yinghe (2018) Calcium-ion batteries: current state-of-the-art and future perspectives. Advanced Materials, 30 (39). 1801702.

Grant, Daniel S., Siegele, Rainer, Bazaka, Kateryna, and Jacob, Mohan V. (2018) Formation of nanocrystalline and amorphous carbon by high fluence swift heavy ion irradiation of a plasma polymerized polyterpenol thin film precursor. Journal of Applied Polymer Science, 135 (29). 46498.

Grant, Daniel S., Bazaka, Kateryna, Davies, Justin B., Banos, Connie, and Jacob, Mohan V. (2018) Organic bioelectronic plasma polymerised polyterpenol thin films: preservation of properties relevant to biomedical and organic electronic applications following exposure to sterilising doses of gamma radiation. Journal of Materials Science: Materials in Electronics, 29 (1). pp. 801-812.

Gao, W.F., Lin, W.X., Liu, T., and Li, M. (2017) An experimental study on the application of polyalcohol solid-solid phase change materials in solar drying with cross-corrugated solar air collectors. In: IOP Conference Series: Earth and Environmental Science (93) From: NEFES 2017: 2nd International Conference on New Energy and Future Energy Systems, 22-25 September 2017, Kunming, China.

Gharahjeh, Siamak, Situ, Rong, He, Yinghe, Lin, Wenxian, and Brown, Richard (2017) A review on ocean acidification as a result of shipping emissions in harbors. In: Proceedings of the Australasian Coasts & Ports 2017 Conference. pp. 483-486. From: Australasian Coasts & Ports 2017 Conference: working with nature, 21-23 June 2017, Cairns, QLD, Australia.

Gao, Pan, Peng, Qiang, and Xiang, Wei (2017) Analysis of packet-loss-induced distortion in view synthesis prediction-based 3-D video coding. IEEE Transactions on Image Processing, 26 (6). pp. 2781-2796.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, Armfield, S.W., and Li, Ming (2017) Penetration height of transitional round fountains in a linearly stratified fluid. International Communications in Heat and Mass Transfer, 81. pp. 79-91.

Grant, Daniel S., Rawat, Rajdeep S., Bazaka, Kateryna, and Jacob, Mohan V. (2017) Inelastic deformation of plasma polymerised thin films facilitated by transient dense plasma focus irradiation. Materials Research Express, 4 (9). 096407. pp. 1-4.

Gao, Pan, Xiang, Wei, Rahaman, D.M. Motiur, and Paul, Manoranjan (2017) Joint texture and depth map coding for error-resilient 3-D video transmission. In: Proceedings of the IEEE International Conference on Image Processing. pp. 1905-1909. From: ICIP 2017: IEEE International Conference on Image Processing, 17-20 September 2017, Beijing, China.

Gao, Pan, Xiang, Wei, and Wang, Bing (2017) Optimal mode selection and channel coding for 3-D video streaming over the internet. In: Proceedings of the IEEE International Conference on Multimedia and Expo Workshops. pp. 31-36. From: ICMEW 2017: IEEE International Conference on Multimedia and Expo Workshops, 10-14 July 2017, Hong Kong, China.

Gummow, Rosalind June (2016) Li₂MnSiO₄ nanostructured cathodes for rechargeable lithium-ion batteries. In: Ozoemena , Kenneth I., and Chen, Shaowei, (eds.) Nanomaterials in Advanced Batteries and Supercapacitors. Nanostructure Science and Technology . Springer, Cham, Switzerland, pp. 25-54.

Gover, R.B., Oloyede, A., Thambiratnam, D.P., Thiyahuddin, M.I., and Morris, A. (2015) Experimental and numerical study of polymeric foam efficacy in portable water filled barriers. International Journal of Impact Engineering , 76. 83 - 97.

Ganesalingam, Dhanya, Read, Wayne, and Sivakugan, Nagaratnam (2015) Radial consolidation of soil layer under truncated cone fill. Environmental Geotechnics, 2 (EG1). 13.00048. pp. 56-62.

Grant, Daniel S., Bazaka, Kateryna, Siegele, Rainer, Holt, Stephen A., and Jacob, Mohan (2015) Ion irradiation as a tool for modifying the surface and optical properties of plasma polymerised thin films. Nuclear Instruments & Methods in Physics Research Section B, 360. pp. 54-59.

Ginger, J., Henderson, D., Humphreys, M., Konthesingha, C., and Stewart, M.G. (2015) Wind loads on the frames of industrial buildings. Australian Journal of Structural Engineering, 16 (2). pp. 169-176.

Gummow, Rosalind J., Han, Guihong, Sharma, Neeraj, and He, Yinghe (2014) Li2MnSiO4 cathodes modified by phosphorous substitution and the structural consequences. Solid State Ionics, 259. pp. 29-39.

Gummow, Rosalind J., and He, Yinghe (2014) Mesoporous manganese-deficient lithium manganese silicate cathodes for lithium-ion batteries. RSC Advances, 4 (23). pp. 11580-11584.

Gummow, R.J., and He, Y. (2014) Recent progress in the development of Li2MnSiO4 cathode materials. Journal of Power Sources, 253. pp. 315-331.

Gummow, R.J., Blackford, M.G., Lumpkin, G.R., and He, Y. (2013) An electron energy loss spectroscopy and electron diffraction study of the Pmnb polymorph of Li2MnSiO4. Journal of Alloys and Compounds, 551. pp. 521-526.

Ganesalingam, Dhanya, Read, Wayne, and Sivakugan, Siva (2013) Consolidation behaviour of a cylindrical soil layer subjected to nonuniform pore-water pressure distribution. International Journal of Geomechanics, 13 (5). pp. 665-671.

Ganesalingam, D., Sivakugan, N., Ameratunga, J., and Schweitzer, G. (2013) Land reclamation on soft clays at Port of Brisbane. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics (1) pp. 2941-2944. From: 18th ICSMGE: 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics, 2-6 September 2013, Paris, France.

Ganesalingam, Dhanya, Sivakugan, Nagaratnam, and Ameratunga, Jay (2013) Influence of settling behaviour of soil particles on the consolidation properties of dredged clay sediment. Journal of Waterway Port Coastal and Ocean Engineering, 139 (4). pp. 295-303.

Gummow, Rosalind J., Sharma, Neeraj, Feng, Ruishu, Han, Guihong, and He, Yinghe (2013) High performance composite lithium-rich nickel manganese oxide cathodes for lithium-ion batteries. Journal of the Electrochemical Society, 160 (10). A1856-A1862.

Ganesalingam, Dhanya, Sivakugan, Nagaratnam, and Read, Wayne (2013) Inflection point method to estimate c(h) from radial consolidation tests with peripheral drain. Geotechnical Testing Journal, 36 (5). pp. 707-712.

Gilberd, J., and Sheehan, M. (2013) Modelling the effects of bagasse pre-drying in sugar mill boiler systems. In: Proceedings of the 35th Conference of the Australian Society of Sugar Cane Technologists. From: 35th Conference of the Australian Society of Sugar Cane Technologists, 16-18 April 2013, Townsville, QLD, Australia.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, and Armfield, Steven (2012) Onset of asymmetry and three-dimensionality in transitional round fountains in a linearly stratified fluid. In: Proceedings of the 18th Australasian Fluid Mechanics Conference. 213. pp. 1-4. From: 18th Australasian Fluid Mechanics Conference, 3-7 December 2012, Launceston, Tasmania, Australia.

Ganesalingam, Dhanya, Ameratunga, Jay, Scweitzer, Guy, Boyle, Peter, and Sivakugan, Siva (2012) Anisotropy in the permeability and consolidation characteristics of dredged mud. In: ANZ 2012 Conference Proceedings. pp. 752-757. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, VIC, Australia.

Gummow, R.J., Sharma, N., Peterson, V.K., and He, Y. (2012) Crystal chemistry of the Pmnb polymorph of Li2MnSiO4. Journal of Solid State Chemistry, 188. pp. 32-37.

Gummow, R.J., Sharma, N., Peterson, V.K., and He, Y. (2012) Synthesis, structure, and electrochemical performance of magnesium-substituted lithium manganese orthosilicate cathode materials for lithium-ion batteries. Journal of Power Sources, 197. pp. 231-237.

Ganesalingam, Dhanya, Arulrajah, Arul, Ameratunga, Jay, Boyle, Peter J., and Sivakugan, Nagaratnam (2011) Geotechnical Properties of reconstituted dredged mud. In: Proceedings from the Pan-AM CGS Geotechnical Conference. pp. 1-7. From: 2011 Pan-Am CGS Geotechnical Conference, 2-6 October 2011, Toronto, Canada .

Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Luo, Chuanxu (2011) Numerical study on mixing characteristics of hot water inside the storage tank of a solar system with different inlet velocities of the supply cold water. Procedia Environmental Sciences, 11. pp. 1153-1163.

Galbraith, Shaun C., and Schneider, Philip A. (2010) Dynamic simulation of a struvite MSMPR crystalliser with crystal nucleation, growth and aggregation. In: Proceedings of Chemeca 2010. pp. 1-11. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

Gummow, Rosalind J., and He, Yinghe (2010) Morphology and preferred orientation of pulse electrodeposited magnesium. Journal of the Electrochemical Society, 157 (4). pp. 45-49.

Galbraith, S.C., and Schneider, P.A. (2009) A review of struvite nucleation studies. In: Proceedings of the 2009 International Conference on Nutrient Recovery from Wastewater Streams. From: 2009 International Conference on Nutrient Recovery from Wastewater Streams, 10 - 13 May, 2009, Vancouver, BC, Canada.

Ginger, John D., Holmes, John D., and Kopp, Gregory A. (2008) Effect of building volume and opening size on fluctuating internal pressure. Wind & Structures, 11 (5). pp. 361-376.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, and Xia, Chaofeng (2007) An experimental study on the heat storage performances of polyalcohols NPG, TAX, PE, and AMPD and their mixtures as solid-solid phase-change materials for solar energy applications. International Journal of Green Energy, 4 (2). pp. 301-311.

Gao, Wenfeng, Lin, Wenxian, Liu, Tao, and Xia, Chaofeng (2007) Analytical and experimental studies on the thermal performance of cross-corrugated and flat-plate solar air heaters. Applied Energy, 84. pp. 425-441.

Ginger, J.D., Henderson, D.J., Leitch, C.J., and Boughton, G.N. (2007) Tropical Cyclone Larry: Estimation of wind field and assessment of building damage. Australian Journal of Structural Engineering, 7 (3). pp. 209-224.

Ginger, J.D., and Holmes, J.D. (2006) Design wind loads on gable-ended low-rise buildings with moderate and steep roof slopes. Australian Journal of Structural Engineering, 6 (2). pp. 89-102.

Guru, D.N., Heberlein, J.V.R., Mook, W.M., Gerberich, W.W., and Berndt, C.C. (2006) Nanostructured partially stabilized zirconia as an interlayer in a multi layered thermal barrier coating. In: Proceedings of the 2006 International Thermal Spray Conference. From: Thermal Spray 2006: Science, Innovation and Application, 15-18 May 2006, Seattle, WA, USA.

Griffin, G.J. (2005) Purification and concentration of xylose and glucose from neutralized bagasse hydrolysates using 3,5-dimethylphenylboronic acid and modified aliquat 336 as coextractants. Separation Science and Technology, 40 (11). pp. 2337-2351.

Ginger, J.D., and Henderson, D.J. (2005) Reliability of metal-clad, low-rise, low-pitch roofs subjected to wind loads. In: Proceedings of Australian Structural Engineering Conference 2005. pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Griffin, Gregory John, and Shu, Li (2004) Solvent extraction and purification of sugars from hemicellulose hydrolysates using boronic acid carriers. Journal of Chemical Technology and Biotechnology, 79 (5). pp. 505-511.

Gilbert, Rob, Balatti, Josephine, Turner, Phil, and Whitehouse, Hilary (2004) The doctoral curriculum: needs and directions in research training. Report. James Cook University, Townsville, QLD, Australia.

Ginger, J.D., and Holmes, J.D. (2003) Effect of building length on wind loads on low-rise buildings with a steep roof pitch. Journal of Wind Engineering and Industrial Aerodynamics, 91 (11). pp. 1377-1400.

Griffin, G.J., and Wood, D.G. (2001) Non-adiabatic catalytic combustion at a fin surface involving heat extraction from the fin edge. Combustion and Flame, 125 (4). pp. 1230-1238.

Ginger, J.D., Reardon, G.F., and Whitbread, B.J. (2000) Wind load effects and equivalent pressures on low-rise house roofs. Engineering Structures, 22 (6). pp. 638-646.

Griffin, G.J., and Wood, D.G. (2000) Modelling of the catalytic combustion of lean fuel flowing over a fin with heat extraction from the trailing edge. Catalysis Today, 63 (2-4). pp. 387-395.

Ganesalingam, Dhanya (2013) Consolidation properties of recent dredged mud sediment and insights into the consolidation analysis. PhD thesis, James Cook University.

Galbraith, Shaun Colin (2011) A study of struvite nucleation, crystal growth and aggregation. PhD thesis, James Cook University.

H

Han, Kang, Xiang, Wei, Wang, Eric, and Huang, Tao (2022) A novel occlusion-aware vote cost for light field depth estimation. IEEE Transactions on Pattern Analysis and Machine Intelligence. (In Press)

He, Ziguo, Liu, Shengjun, Zhang, Cheng, Fan, Liyuan, Zhang, Jian, Chen, Qian, Sun, Yudie, He, Lifang, Wang, Zhicai, and Zhang, Kui (2021) Coal based carbon dots: recent advances in synthesis, properties, and applications. Nano Select, 2 (9). pp. 1589-1604.

Hall, Bevan, Wheatley, Greg, and Zaeimi, Mohammad (2021) On the design of the manifold for a race car. Periodica Polytechnica Mechanical Engineering, 65 (2). pp. 171-179.

Hayford, Michael Saah, and Datta, Bithin (2021) Source characterization of multiple reactive species at an abandoned mine site using a groundwater numerical simulation model and optimization models. International Journal of Environmental Research and Public Health, 18 (9). 4776.

Han, Yu, Wang, Zhenyong, Guo, Qing, and Xiang, Wei (2020) Deep learning-based detection for moderate-density code multiple access in IoT networks. IEEE Communications Letters, 24 (1). pp. 122-125.

He, Jing, Strezov, Vladimir, Zhou, Xiaoteng, Kan, Tao, and Kumar, Ravinder (2020) Effect of phosphate pretreatments on properties of pyrolytic products from heavy-metal-contaminated biomass. Energy and Fuels, 34 (12). pp. 15322-15331.

Huang, Tao, Yuan, Xiaojun, Yuan, Jinhong, and Xiang, Wei (2020) Optimization of data exchange in 5G vehicle-to-infrastructure edge networks. IEEE Transactions on Vehicular Technology, 69 (9). pp. 9376-9389.

He, Jing, Strezov, Vladimir, Zhou, Xiaoteng, Kumar, Ravinder, and Kan, Tao (2020) Pyrolysis of heavy metal contaminated biomass pre-treated with ferric salts: product characterisation and heavy metal deportment. Bioresource Technology, 313. p. 123641.

Holmes, John, Ginger, John, and Mullins, Peter (2019) Aerodynamically-shaped cyclone shelters for Queensland. Australian Journal of Civil Engineering, 17 (2). pp. 188-194.

Heidarpur, Moslem, Ahmadi, Arash, Ahmadi, Majid, and Rahimi Azghadi, Mostafa (2019) CORDIC-SNN: on-FPGA STDP learning with Izhikevich neurons. IEEE Transactions on Circuits and Systems I: Regular Papers, 66 (7). pp. 2651-2661.

Hazrati-Yadkoori, Shahrbanoo, and Datta, Bithin (2019) Characterization of groundwater contaminant sources by utilizing MARS based surrogate model linked to optimization model. In: Advances in Computer Communication and Computational Sciences: proceedings of IC4S 2017 (759) pp. 153-162. From: IC4S 2017: 2nd International Conference on Computer, Communication and Computational Sciences, 11-12 October 2017, Patong, Thailand.

Hashemi, Sara, Rahimi Azghadi, Mostafa, and Navi, Keivan (2019) Design and analysis of efficient QCA reversible adders. The Journal of Supercomputing, 75. pp. 2106-2125.

He, Jing, Strezov, Vladimir, Kan, Tao, Weldekidan, Haftom, Asumadu-Sarkodie, Samuel, and Kumar, Ravinder (2019) Effect of temperature on heavy metal (loid) deportment during pyrolysis of Avicennia marina biomass obtained from phytoremediation. Bioresource Technology, 278. pp. 214-222.

Humphreys, Mitchell T., Ginger, John D., and Henderson, David J. (2019) Internal pressures in a full-scale test enclosure with windward wall openings. Journal of Wind Engineering and Industrial Aerodynamics, 189. pp. 118-124.

Hou, Lu, Lei, Lei, Zheng, Kan, and Wang, Xianbin (2019) A Q-learning based proactive caching strategy for non-safety related services in vehicular networks. IEEE Internet of Things Journal, 6 (3). pp. 4512-4520.

Huo, Shuwei, Zhou, Yuan, Xiang, Wei, and Kung, Sun-Yuan (2019) Semisupervised learning based on a novel iterative optimization model for saliency detection. IEEE Transactions on Neural Networks and Learning Systems, 30 (1). pp. 225-241.

Huang, Meidong, Yang, Bin, Ge, Xiaohu, and Xiang, Wei (2018) Reliable energy-efficient routing algorithm for vehicle-assisted wireless ad-hoc networks. In: Proceedings of the 14th International Wireless Communications and Mobile Computing Conference. pp. 1219-1224. From: IWCMC 2018: 14th International Wireless Communications and Mobile Computing Conference, 25-29 June 2018, Limassol, Cyprus.

Hocking, Rosalie K., Gummow, Rosalind J., King, Hannah J., Sabri, Mayada, Kappen, Peter, Dwyer, Christian, and Change, Shery L.Y. (2018) Direct formation of 2D-MnOx under conditions of water oxidation catalysis. ACS Applied Nano Materials, 1 (4). pp. 1603-1611.

Hammond, Lauren, Bai, Lisa, Sheehan, Madoc, and Walker, Craig (2018) Experimental analysis and diffusion modelling of solar drying of macroalgae - Oedogonium sp. Chemical Engineering Transactions, 65. pp. 427-432.

Hayford, Michael, and Datta, Bithin (2018) Geochemical reactive modeling of flow and transport process at a mine site in Northern Territory, Australia. International Journal of Geomate, 15 (51). pp. 9-15.

Heindler, Franz M., Alajmi, Fahad, Huerlimann, Roger, Zeng, Chaoshu, Newman, Stephen J., Vamvounis, George, and van Herwerden, Lynne (2017) Toxic effects of polyethylene terephthalate microparticles and Di(2-ethylhexyl)phthalate on the calanoid copepod, Parvocalanus crassirostris. Ecotoxicology and Environmental Safety, 141. pp. 298-305.

Hazrati Yadkoori, Shahrbanoo, and Datta, Bithin (2017) Adaptive surrogate model based optimization (ASMBO) for unknown groundwater contaminant source characterizations using self-organizing maps. Journal of Water Resource and Protection, 9. pp. 193-214.

Holmes, David W., Sheehan, Madoc, Birks, Melanie, and Smithson, John (2017) Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study. European Journal of Engineering Education, 43 (1). pp. 126-143.

Hazrati Yadkoori, Shahrbanoo, and Datta, Bithin (2017) Evaluation of unknown groundwater contaminant sources characterization efficiency under hydrogeologic uncertainty in an experimental aquifer site by utilizing surrogate models. Journal of Water Resource and Protection, 9 (13). pp. 1612-1633.

Hou, Yonghong, Xu, Jianming, Xiang, Wei, Ma, Maode, and Lei, Jianjun (2017) Near-optimal cross-layer forward error correction using raptor and RCPC codes for prioritized video transmission over wireless channels. IEEE Transactions on Circuits and Systems for Video Technology, 27 (9). pp. 2028-2040.

Hazrati Y., Shahrbanoo, and Datta, Bithin (2017) Self-organizing map based surrogate models for contaminant source identification under parameter uncertainty. International Journal of Geomate, 13 (36). pp. 11-18.

Hou, Lu, Zhao, Shaohang, Xiong, Xiong, Zheng, Kan, Chatzimiosis, Perkelis, Hossain, M. Shamin, and Xiang, Wei (2016) Internet of Things cloud: architecture and implementation. IEEE Communications Magazine, 54. pp. 32-39.

Holmes, David W., Williams, John R., Tilke, Peter, and Leonardi, Christopher R. (2016) Characterizing flow in oil reservoir rock using SPH: absolute permeability. Computational Particle Mechanics, 3 (2). pp. 141-154.

Holmes, John D., Allsop, Andrew C., and Ginger, John D. (2014) Gust durations, gust factors and gust response factors in wind codes and standards. Wind & Structures, 19 (3). pp. 339-352.

Hoque, N., Situ, R., Hagan, W., Almedia, J., Lin, W., and Brown, R.J. (2014) A thermo-fluid study of a diesel engine wet scrubber. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. 361. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Hollands, K.G. Terry, and Suehrcke, Harry (2013) A three-state model for the probability distribution of instantaneous solar radiation, with applications. Solar Energy, 96. pp. 103-112.

Huang, Alex Q., Shee, Xu, Wang, Gangyao, Eckhardt, Chad, and Kikkert, Cornelius K. (2013) The emerging solid state transformer and its impact on the electric power grid. In: Goel, Sanjay, Bush, Stephen F., and Bakken, David, (eds.) IEEE Vision for Smart Grid Communications: 2030 and beyond. Institute of Electrical and Electronics Engineers, New York, NY, USA, pp. 311-325.

Hanna, Daniel, Sivakugan, Nagaratnam, and Lovisa, Julie (2013) Simple approach to consolidation due to constant rate loading in clays. International Journal of Geomechanics, 13 (2). pp. 193-196.

Holmes, J.D., and Ginger, J.D. (2012) Internal pressures - The dominant windward opening case: a review. Journal of Wind Engineering and Industrial Aerodynamics, 100 (1). pp. 70-76.

Ham, Jonathan, Devietti, Jenna, Mathan, Bobby Kannan, and Jegatheesan, Veeriah (2012) Improving drinking water distribution systems. Sustainability and Infrastructure, 3. pp. 14-15.

Holmes, David W., Williams, John R., and Tilke, Peter (2011) A framework for parallel computational physics algorithms on multi-core: SPH in parallel. Advances in Engineering Software, 42 (11). pp. 999-1008.

Huang, Han, Zhou, Libo, and Yin, Ling (2011) Polishing using flexible abrasive tools and loose abrasives. In: Jackson, Mark J., and Davim, J. Paulo, (eds.) Machining with Abrasives. Springer, New York, NY, USA, pp. 345-384.

Holmes, D.W., and Loughran, J.G. (2010) Numerical aspects associated with the implementation of a finite strain, elasto-viscoelastic–viscoplastic constitutive theory in principal stretches. International Journal for Numerical Methods in Engineering, 83 (3). pp. 366-402.

He, Yun, Liu, Tao, Lin, Wen-xian, Luo, Chuan-xu, and Gao, Wen-feng (2010) Temperature field analysis of solar chimney. Journal of Wuhan University of Technology, 32 (14). pp. 174-178.

Henderson, David J., and Ginger, John D. (2010) Fluctuating wind loads for cladding design. In: Proceedings of The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010. pp. 150-155. From: 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference, 8-12 August 2010, Sydney, NSW, Australia.

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of the 11th Americas Conference on Wind Engineering. From: 11th Americas Conference on Wind Engineering, 22-26 June 2009, San Juan, Puerto Rico.

Holmes, J.D., and Ginger, J.D. (2009) Codification of internal pressures for building design. In: Proceedings of Seventh Asia-Pacific Conference on Wind Engineering. pp. 1-8. From: Seventh Asia-Pacific Conference on Wind Engineering, 8-12 November 2009, Taipei, Taiwan.

He, Yinghe (2008) Application of flow-focusing to the break-up of an emulsion jet for the production of matrix-structured microparticles. Chemical Engineering Science, 63 (9). pp. 2500-2507.

Henderson, David, and Ginger, John (2008) Role of building codes and construction standards in windstorm disaster mitigation. Australian Journal of Emergency Management, 23 (2). pp. 40-46.

Holmes, D.W., and Loughran, J.G. (2008) Theoretical aspects of the testing of elasto-viscoelastic–viscoplastic materials. Polymer Testing, 27 (2). pp. 189-203.

Henderson, D., Ginger, J., Berndt, C., and Kopp, G.A. (2008) Fatigue failure of G550 steel building components during wind loading. In: Proceedings of the Australasian Structural Engineering Conference 2008. pp. 437-446. From: Australasian Structural Engineering Conference 2008, 26-27 June 2008, Melbourne, VIC, Australia.

Henderson, D., Ginger, J., and Morrison, M. (2008) New Australian cyclonic wind induced fatigue loading criteria for roofing. In: Proceedings of the Australasian Structural Engineering Conference 2008. pp. 427-436. From: Australasian Structural Engineering Conference 2008, 26-27 June 2008, Melbourne, VIC, Australia.

Holmes, D.W., and Loughran, J.G. (2007) A theory for the isolation of the complex deformation characteristics of nonlinear viscoelastic materials. ANZIAM Journal, 48. pp. 645-660.

He, Yinghe (2007) Breakup of a flow-focused emulsion jet for the production of matrix-structured microcapsules. Applied Physics Letters, 91 (25). pp. 1-3.

Henderson, D.J., and Ginger, J.D. (2007) Vulnerability model of an Australian high-set house subjected to cyclonic wind loading. Wind & Structures, 10 (3). pp. 269-285.

Holmes, D.W., Loughran, J.G., and Suehrcke, H. (2006) Constitutive model for large strain deformation of semicrystalline polymers. Mechanics of Time Dependent Materials, 10 (4). pp. 281-313.

Hodzic, A., Curro, R., Britton, P, Shu, L., Berndt, C.C., and Shanks, R.A. (2006) Mechanical properties of PHB-Bagasse composites. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites. pp. 156-161. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Hardeo, P., and Karunasena, W. (2006) Three dimensional finite element analysis of concrete filled FRP tubular model piles under lateral loads. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites. pp. 282-287. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Henderson, D.J., and Ginger, J.D. (2005) Fatigue failure of roof components subjected to wind loading. In: Proceedings of Australian Structural Engineering Conference 2005. pp. 1-8. From: Australian Structural Engineering Conference 2005, 11 - 14 September 2005, Newscastle, NSW, Australia.

Hardy, Tom, Mason, Luciano, McConochie, Jason, and Bode, Lance (2004) Modeling suspended sediment during construction in Great Barrier Reef world heritage area. Journal of Environmental Engineering, 130 (9). pp. 1021-1031.

Hughes, W.D., and Karunasena, W.M. (2004) Factors affecting debonding of FRP (fiber-reinforced polymer) rehabilitated concrete beams. In: Proceedings of the 3rd International Conference on Advances in Structural Engineering and Mechanics. pp. 871-880. From: 3rd International Conference on Advances in Structural Engineering and Mechanics, 2-4 Sep 2004, Seoul, Korea.

Hartley, J.A., Leong, Y.K., and Nott, M.C. (2004) Yield stress of phosphate rock slurries for gravity thickening. In: Proceedings of Chemeca 2004 the 32nd Australasian Chemical Engineering Conference. From: Chemeca 2004 the 32nd Australasian Chemical Engineering Conference, 26 - 29 September 2004, Sydney, NSW, Australia.

Hardy, Thomas A., McConochie, Jason D., and Mason, Luciano B. (2003) Modelling tropical cyclone wave population of the Great Barrier Reef. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 129 (3). pp. 104-113.

Halide, Halmar, Ridd, Peter V., Peterson, Eric L., and Foster, David (2003) Assessing sediment removal capacity of vegetated and non-vegetated settling ponds in prawn farms. Aquacultural Engineering, 27 (4). pp. 295-314.

Hardeo, P., and Karunasena, W. (2003) Buckling of fibre-reinforced plywood plates. In: Proceedings of Second International Conference on Structural Stability and Dynamics (1) pp. 442-447. From: Second International Conference on Structural Stability and Dynamics, 16-18 December 2002, Singapore.

Hardy, Thomas A., Mason, Luciano B., and McConochie, Jason D. (2001) A wave model for the Great Barrier Reef. Ocean Engineering, 28 (1). pp. 45-70.

Henderson, M., Leong, Y. K., and Sivakugan, N. (2001) Acid formation potential of Pajingo's gold tailings. In: Environmental Geotechnics: Proceedings of the 2nd Australia and New Zealand Conference on Environmental Geotechnics -- GeoEnvironment 2001. pp. 127-132. From: GeoEnvironment 2001, 28-30 November 2001, Newcastle.

Henderson, David James (2010) Response of pierced fixed metal roof cladding to fluctuating wind loads. PhD thesis, James Cook University.

Holmes, David William (2007) Aspects of finite strain constitutive model for semicrystalline polymers. PhD thesis, James Cook University.

I

Islam, Md Anwarul, Dada, Tewodros Kassa, Parvin, Mst Irin, Vuppaladadiyam, Arun K., Kumar, Ravinder, and Antunes, Elsa (2022) Silver ions and silver nanoparticles removal by coffee derived biochar using a continuous fixed-bed adsorption column. Journal of Water Process Engineering, 48. 102935.

Inam, M.I., Lin, Wenxian, and Armfield, S.W. (2022) Thermal Entrainment in the Core Regions of Transitional Plane Fountains in Linearly Stratified Ambient Fluids. International Journal of Applied Mechanics, 14 (3). 2250020.

Islam, Md Anwarul, Jacob, Mohan V., and Antunes, Elsa (2021) A critical review on silver nanoparticles: from synthesis and applications to its mitigation through low-cost adsorption by biochar. Journal of Environmental Management, 281. 111918.

Inam, Mohammad Ilias, Lin, Wenxian, Williamson, N., Armfield, S.W., and He, Yinghe (2019) Characteristics of unsteadiness for transitional plane fountains in linearly stratified fluids. International Communications in Heat and Mass Transfer, 100. pp. 83-97.

Inam, Mohammad Ilias, Lin, Wenxian, Armfield, S.W., and He, Yinghe (2016) Correlations for maximum penetration heights of transitional plane fountains in linearly stratified fluids. International Communications in Heat and Mass Transfer, 77. pp. 64-77.

Inam, Mohammad Ilias, Lin, Wenxian, Armfield, S.W., and He, Yinghe (2015) Asymmetry and penetration of transitional plane fountains in stratified fluid. International Journal of Heat and Mass Transfer, 90. pp. 1125-1142.

Ivanova, Elena P., Bazaka, Kateryna, and Crawford, Russell (2014) New functional biomaterials for medicine and healthcare. Woodhead Publishing Series in Biomaterials, 67 . Woodhead Publishing, Cambridge, UK.

Ievers, Simon, and Lin, Wenxian (2009) Numerical simulation of three-dimensional flow dynamics in a hot water storage tank. Applied Energy, 86 (12). pp. 2604-2614.

Ichim, I., Li, Q., Loughran, J., Swain, M.V., and Kieser, J. (2007) Restoration of non-carious cervical lesions: part I. modelling of restorative fracture. Dental Materials, 23 (12). pp. 1553-1561.

Ibrahim, A., Lima, R.S., Berndt, C.C., and Marple, B.R. (2007) Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings. Surface and Coatings Technology, 201 (16-17). pp. 7589-7596.

Inam, Mohammad Ilias (2016) Behavior of transitional plane fountains in linearly-stratified environments. PhD thesis, James Cook University.

J

Jahanbakht, Mohammad, Xiang, Wei, Waltham, Nathan J., and Rahimiazghadi, Mostafa (2022) Distributed Deep Learning in the Cloud and Energy-efficient Real-time Image Processing at the Edge for Fish Segmentation in Underwater Videos Segmentation in Underwater Videos. IEEE Access, 10. pp. 117796-117807.

Jiang, Chengxin, Wang, Yafeng, Cheng, Peng, and Xiang, Wei (2022) A Low-Complexity Codebook Optimization Scheme for Sparse Code Multiple Access. IEEE Transactions on Communications, 70 (4). pp. 2451-2463.

Jahanbakht, Mohammad, Xiang, Wei, Robson, Barbara, and Rahimi Azghadi, Mostafa (2022) Nitrogen prediction in the Great Barrier Reef using finite element analysis with deep neural networks. Environmental Modelling & Software, 150. 105311.

Jahanbakht, Mohammad, Xiang, Wei, and Rahimi Azghadi, Mostafa (2022) Sea surface temperature forecasting with ensemble of stacked deep neural networks. IEEE Geoscience and Remote Sensing Letters, 19. 1502605.

Jahanbakht, Mohammad, Xiang, Wei, and Azghadi, Mostafa Rahimi (2022) Sediment Prediction in the Great Barrier Reef using Vision Transformer with finite element analysis. Neural Networks, 152. pp. 311-321.

Jahanbakht, Mohammad, Xiang, Wei, Hanzo, Lajos, and Rahimi Azghadi, Mostafa (2021) Internet of underwater things and big marine data analytics — a comprehensive survey. IEEE Communications Surveys & Tutorials, 23 (2). pp. 904-956.

Jiang, Chunbo, He, Yinghe, and Liu, Yang (2020) Recent advances in sensors for electrochemical analysis of nitrate in food and environmental matrices. Analyst, 145. pp. 5400-5413.

Jaditager, Mohamed, and Sivakugan, Nagaratnam (2018) Consolidation behavior of fly ash-based geopolymer-stabilized dredged mud. Journal of Waterway Port Coastal and Ocean Engineering, 144 (4). 06018003.

Jayasinghe, Nandana Chana, Ginger, John D., Henderson, David J., and Walker, George R. (2018) Distribution of wind loads in metal-clad roofing structures. Journal of Structural Engineering, 144 (4). 04018014-1.

Jia, Min, Wang, Linfang, Guo, Qingjun, Gu, Xuemai, and Xiang, Wei (2018) A low complexity detection algorithm for fixed up-link SCMA system in mission critical scenario. IEEE Internet of Things Journal, 5 (5). pp. 3289-3297.

Jaditager, Mohamed, and Sivakugan, Nagaratnam (2017) Influence of fly ash-based geopolymer binder on the sedimentation behaviour of dredged mud. Journal of Waterway, Port, Coastal, and Ocean Engineering, 143 (5). pp. 1-9.

Jacob, Mohan V., Taguchi, Dai, Iwamoto, Mitsumasa, Bazaka, Kateryna, and Rawat, Rajdeep Singh (2017) Resistive switching in graphene-organic device: charge transport properties of graphene-organic device through electric field induced optical second harmonic generation and charge modulation spectroscopy. Carbon, 112. pp. 111-116.

Jia, Min, Xuemai, Gu, Qing, Guo, Xiang, Wei, and Zhang, Naitong (2016) Broadband hybrid satellite-terrestrial communication systems based on cognitive radio toward 5G. IEEE Wireless Communications Magazine, 6 (23). pp. 96-106.

Jaditager, M., and Sivakugan, S. (2016) Geotechnical site investigations for dredging works - Port of Townsville. In: Proceedings of the 5th International Conference on Geotechnical and Geophysical Site Characterisation (2) pp. 987-990. From: 5th International Conference on Geotechnical and Geophysical Site Characterisation, 5-9 September 2016, Gold Coast, QLD, Australia.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2015) Capital dredging at Port of Townsville. In: Proceedings of the Australasian Coasts and Ports Conference. pp. 120-124. From: Coasts & ports 2015: Australasian Coasts and Ports Conference, 15 - 18 September 2015, Auckland, New Zealand.

Jha, Manish, and Datta, Bithin (2015) Application of dedicated monitoring: network design for unknown pollutant-source identification based on dynamic time warping. Journal of Water Resources Planning and Management, 141 (11). 04015022. pp. 1-13.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2015) Settlement analysis of eastern reclamation area: Port of Townsville. In: Proceedings of the 12th Australia New Zealand Conference on Geomechanics. pp. 1131-1135. From: ANZ 2015: 12th Australia New Zealand Conference on Geomechanics, 22 - 25 February 2015, Wellington, New Zealand.

Jha, Manish, and Datta, Bithin (2015) Application of unknown groundwater pollution source release history estimation methodology to distributed sources incorporating surface-groundwater interactions. Environmental Forensics, 16 (2). pp. 143-162.

Jacob, Mohan V., Rawat, Rajdeep S., Ouyang, Bo, Bazaka, Kateryna, Kumar, D. Sakthi, Taguchi, Dai, Iwamoto, Mitsumasa, Neupane, Ram, and Varghese, Oomman K. (2015) Catalyst-free plasma enhanced growth of graphene from sustainable sources. Nano Letters, 15. pp. 5702-5708.

Jacob, Mohan (2015) Organic Semiconductors. MDPI Books, Basel, Switzerland.

Jaditager, M., Lovisa, J., and Sivakugan, N. (2014) Maintenance dredging at Port of Townsville. International Journal of Environmental, Chemical, Ecological and Geophysical Engineering, 8 (12). pp. 734-737.

Jha, Manish Kumar, and Datta, Bithin (2014) Linked simulation-optimization based dedicated monitoring network design for unknown pollutant source identification using dynamic time warping distance. Water Resources Management, 28 (12). pp. 4161-4182.

Jacob, Mohan V. (2014) Organic semiconductors: past, present and future. Electronics, 3 (4). pp. 594-597.

Jacob, Mohan V., Easton, Chris D., Anderson, Liam J., and Bazaka, Kateryna (2014) RF plasma polymerised thin films from natural resources. International Journal of Modern Physics: Conference Series, 32. 1460319. pp. 1-10.

Jacob, Mohan V., Olsen, Natalie S., Anderson, Liam J., Bazaka, Kateryna, and Shanks, Robert A. (2013) Plasma polymerised thin films for flexible electronic applications. Thin Solid Films, 546. pp. 167-170.

Jha, Manish, and Datta, Bithin (2013) Three-dimensional groundwater contamination source identification using adaptive simulated annealing. Journal of Hydrologic Engineering, 18 (3). pp. 307-317.

Jahirul, M.I., Senadeera, W., Brooks, P., Brown, R.J., Situ, R., Pham, P.X., and Masri, A.R. (2013) An Artificial Neutral Network (ANN) model for predicting biodiesel kinetic viscosity as a function of temperature and chemical compositions. In: Proceedings of the 20th International Congress on Modelling and Simulation. pp. 1561-1567. From: MODSIM2013: 20th International Congress on Modelling and Simulation, 1-6 December 2013, Adelaide, SA, Australia.

Jayasinghe, N.C., Ginger, J.D., Henderson, D.J., and Walker, G.R. (2012) Distribution of wind loads in roofing connections. In: Australasian Structural Engineering Conference-Proceedings. 36. pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Jacob, Mohan V., Bazaka, Kateryna, Taguchi, Dai, Manaka, Takaaki, and Iwamoto, Mitsumasa (2012) Electron-blocking hole-transport polyterpenol thin films. Chemical Physics Letters, 528. pp. 26-28.

Jegatheesan, V., Shu, L., Keir, G., and Phong, D.D. (2012) Evaluating membrane technology for clarification of sugarcane juice. Reviews in Environmental Science and Bio-Technology, 11 (2). pp. 109-124.

Jacob, Mohan (2011) Non-Linear Surface Impedance of YBCO Superconductors. Lambert Academic Publishing, Germany.

Jayasinghe, N.C., and Ginger, J.D. (2011) Vulnerability of roofing components to wind loads. Wind & Structures, 14 (4). pp. 321-335.

Jha, Manish K., and Datta, Bithin (2011) Simulated annealing based simulation-optimization approach for identification of unknown contaminant sources in groundwater aquifers. Desalination and Water Treatment, 32 (1-3). pp. 79-85.

Jegatheesan, V., Shu, L., Nghiem, L.D., Shon, H.K., and Chang, Chia-Yuan (2011) Editorial. Desalination and Water Treatment, 32. pp. 1-3.

Joseph, Tony, Sebastian, Mailadil, Jantunen, Heli, Jacob, Mohan, and Sreemoolanadhan, Hariharaiyer (2011) Tape casting and dielectric properties of Sr2ZnSi2O7-based ceramic–glass composite for low-temperature co-fired ceramics applications. International Journal of Applied Ceramic Technology, 8 (4). pp. 854-864.

Jacob, Mohan, and Bazaka, Kateryna (2010) Fabrication of Electronic Materials from Australian Essential Oils. Report. Australian Government: Rural Industries Research and Development Corporation, Barton, ACT, Australia.

Jacob, M.V., Bazaka, K., Weis, M., Taguchi, D., Manaka, T., and Iwamoto, M. (2010) Fabrication and characterization of polyterpenol as an insulating layer and incorporated organic field effect transistor. Thin Solid Films, 518 (21). pp. 6123-6129.

Jacob, Mohan V., Sudheendran, K., and Raju, K.C. James (2010) Bi2 (Zn 2/3-x/3Nb4/3-2x/3Ti x)O7 ceramics - a low temperature sintered material for LTCC applications. Journal of the Australian Ceramic Society, 46 (2). pp. 54-58.

Jacob, M.V., Thomas, S., Sebastian, M.T., Honkama, J., and Jantunen, H. (2010) Frequency and temperature dependent dielectric properties of greentapes. Journal of the Australian Ceramic Society, 46 (1). pp. 36-40.

Jegatheesan, V., Shu, L., Liow, J.L., and Sivakugan, N. (2009) Diverse challenges faced in developing sustainable catchments. Water, Air, & Soil Pollution: focus, 9 (5-6). pp. 321-322.

Jeppesen, T., Shu, L., Keir, G., and Jegatheesan, V. (2009) Metal recovery from reverse osmosis concentrate. Journal of Cleaner Production, 17 (7). pp. 703-707.

Jegatheesan, V., Senaratne, N., Steicke, C., and Kim, Seung-Hyun (2009) Powdered activated carbon for fouling reduction of membrane in a pilot-scale recirculation aquaculture system. Desalination and Water Treatment, 5 (1-3). pp. 1-5.

Jegatheesan, V., Liow, J.L., Shu, L., Kim, S.H., and Visvanathan, C. (2009) The need for global coordination in sustainable development. Journal of Cleaner Production, 17 (7). pp. 637-643.

Jegatheesan, V., Phong, D.D., Shu, L., and Ben Aim, R. (2009) Performance of ceramic micro- and ultrafiltration membranes treating limed and partially clarified sugar cane juice. Journal of Membrane Science, 327 (1-2). 69 -77 .

Jegatheesan, V., Shu, L., and Visvanathan, C. (2009) Application of membrane bioreactors for water reuse. In: Pandey, Ashok , Larroche, Christian, Soccol, Carlos Ricardo, and Dussap, Claude-Gilles, (eds.) New Horizons in Biotechnology. Asiatech, New Delhi, India, pp. 272-285.

Jegatheesan, Jega, Kim, Seung-Hyun, Joo, C. K., and Gao, Baoyu (2009) Evaluating the effects of granular and membrane filtrations on chlorine demand in drinking water. Journal of Environmental Sciences, 21 (1). pp. 23-29.

Jacob, Mohan (2009) Low loss dielectric materials for high frequency applications. International Journal of Modern Physics B, 23 (17). pp. 3649-3654.

Jacob, Mohan V. (2009) Non-destructive dielectric characterization techniques using electromagnetic waves. In: Proceedings of 12th International Symposium on Microwave and Optical Technology. 339- 342. From: 12th International Symposium on Microwave and Optical Technology, 16 - 19 December 2009, New Delhi, India.

Jegatheesan, V., and Shu, L. (2009) Special issue on the challenges in environmental science & engineering, CESE-2009, 14–17 July, 2009— Jupiters Hotel, Townsville, Queensland, Australia. Desalination and Water Treatment, 11 (1-2). p. 1.

Jacob, Mohan V. (2009) Understanding the fundamental material constants in microwave measurements. Ferroelectrics, 387 (1). pp. 91-101.

Jafari, Seid Mahdi, Assadpoor, Elham, He, Yinghe, and Bhandari, Bhesh (2008) Re-coalescence of emulsion droplets during high-energy emulsification. Food Hydrocolloids, 22 (7). pp. 1191-1202.

Jamal Khan, S., Visvanathan, C., Jegatheesan, V., and BenAim, R. (2008) Influence of mechanical mixing rates on sludge characteristics and membrane fouling in MBRs. Separation Science and Technology, 43 (7). pp. 1826-1838.

Jacob, M.V., Easton, C.D., Woods, G.S., and Berndt, C.C. (2008) Fabrication of a novel organic polymer thin film. Thin Solid Films, 516 (12). pp. 3884-3887.

Jegatheesan, V., Steicke, C., Pulefou, T., Zeng, C., and Shu, L. (2008) Recirculating aquaculture systems (RAS): performance of granular media filtration and membrane bioreactors. Journal of Science, Technology and Management, 1 (1). pp. 31-45.

Jegatheesan, Veeriah, Shu, Li, Visvanathan, Chettiyappan, and Thanh, Bui Xuan (2008) Aerobic environmental processes. In: Pandey, Ashok, Larroche, Christian, Soccol, Carlos Ricardo, and Dussap, Claude-Giles, (eds.) Advances in Fermentation Technology. Asiatech Publishers, New Delhi, India, pp. 607-639.

Jacob, Mohan V., Sudheendran, K., Raju, K.C. James, and Mazierska, Janina (2008) Bi2(Zn2/3-x/3Nb4/3-2x/3Tix)O7 ceramics - a high permittivity microwave dielectrics for electronics application. In: Proceedings of the Asia Pacific Microwave Conference 2008. From: Asia Pacific Microwave Conference 2008, 16 - 20 December 2008, Hong Kong.

Jafari, Seid Mahdi, Assadpoor, Elham, He, Yinghe, and Bhandari, Bhesh (2008) Encapsulation efficiency of food flavours and oils during spray drying. Drying Technology, 26 (7). pp. 816-835.

Jacob, M.V., Thomas, S., Sebastien, M., Mazierska, J., Honkama, J., and Jantunen, H. (2008) Low temperature microwave characterisation of GreenTapes using split post dielectric resonator. In: Proceedings of the Asia Pacific Microwave Conference 2008. From: Asia Pacific Microwave Conference 2008, 16 - 20 December 2008, Hong Kong.

Jafari, Seid Mahdi, Assadpoor, Elham, Bhandari, Bhesh, and He, Yinghe (2008) Nano-particle encapsulation of fish oil by spray drying. Food Research International, 41 (2). pp. 172-183.

Jegatheesan, V., Weragoda, S., and Visvanathan, C. (2008) Rapid water quality characterization for chlorine demand and THM formation in drinking waters. Journal of Water Supply Research and Technology - AQUA, 57 (4). pp. 259-272.

Jacob, Mohan, Subodh, G., Sebastian, Mailadil, Krupka, Jerzy, Mazierska, Janina, and Bialkowski, M (2007) Microwave characterisation of MgTe2O5 using quasi TE0np mode dielectric resonator technique. In: Proceedings of 2007 Asia-Pacific Microwave Conference. pp. 1481-1483. From: APMC Asia-Pacific Microwave Conference: Technology Convergence: Microwave for Life Sciences, 11-14 December 2007, Bangkok, Thailand.

Jegatheesan, V., Zeng, C., Shu, L., Manicom, C., and Steicke, C. (2007) Technological advances in aquaculture farms for minimal effluent discharge to oceans. Journal of Cleaner Production, 15 (16). pp. 1535-1544.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Production of sub-micron emulsions by ultrasound and microfluidization techniques. Journal of Food Engineering, 82 (4). pp. 478-488.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Optimization of nano-emulsions production by microfluidization. European Food Research and Technology, 225 (5-6). pp. 733-741.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2007) Effectiveness of encapsulating biopolymers to produce sub-micron emulsions by high energy emulsification techniques. Food Research International, 40 (7). pp. 862-873.

Jafari, Seid, He, Yinghe, and Bhandari, Bhesh (2007) Encapsulation of nanoparticles of d-limonene by spray drying: role of emulsifiers and emulsifying techniques. Drying Technology, 25 (6). pp. 1079-1089.

Jacob, M.V., Pamu, D., and Raju, K.C. James (2007) Cryogenic microwave dielectric properties of sintered (Zr 0.8 Sn 0.2) TiO4 doped with CuO and ZnO. Journal of the American Ceramic Society, 90 (5). pp. 1511-1514.

Jegatheesan, V., Kim, S.H., and Joo, C.K. (2007) Evaluating the drinking water quality through an efficient chlorine decay model. Water Science and Technology: Water Supply, 6 (4). pp. 1-7.

Jin, Yan, He, Yinghe, and Davies, Nigel (2007) Formulation and stability evaluation of surfactant-free water-in-(highly volatile) oil emulsions. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007. pp. 366-373. From: Chemeca 2007: academia and industry - strengthening the profession., 23-26 September 2007, Melbourne, Victoria, Australia.

Jacob, M.V., and Raju, K.C. James (2007) Microwave characterisation of dielectric materials - an overview. In: Proceedings on International Conference on Advanced Materials and Composites. pp. 765-772. From: International Conference on Advanced Materials and Composites, 24-26 October 2007, Thiruvananthapuram, India.

Jafari, Seid, He, Yinghe, and Bhandari, Bhesh (2007) Role of powder particle size on the encapsulation efficiency of oils during spray drying. Drying Technology, 25 (6). pp. 1081-1089.

Jacob, Mohan V. (2007) Temperature dependence of the complex permittivity of Greentapes. In: Proceedings of Symposium P: Electromagnetic Materials (ICMAT 2007). pp. 44-47. From: International Conference on Materials for Advanced Technologies 2007, 1-6 July 2007, Singapore.

Jacob, M.V., Hartnett, J.G., Mazierska, J., Krupka, J., and Tobar, M.E. (2006) Dielectric characterisation of barium fluoride at cryogenic temperatures using TE011 and quasi TE0mn mode dielectric resonators. Cryogenics, 46 (10). pp. 730-735.

Johnson, K., Lemcke, P., Karunasena, W., and Sivakugan, N. (2006) Modelling the load-deformation response of deep foundations under oblique loading. Environmental Modelling & Software, 21 (9). pp. 1375-1380.

Jacob, Mohan V., Krupka, Jerzy, Mazierska, Janina, and Woods, Graham (2006) Cryogenic complex anisotropic permittivity of magnesium fluoride. Materials Science and Engineering: A , 427 (1). pp. 175-180.

Jacob, Mohan V. (2006) Influence of RF heating on microwave loss. In: Proceedings of the 2006 International Conference on Microwaves, Radar & Wireless Communications (1) pp. 247-250. From: MIKON 2006 International Conference on Microwaves, Radar & Wireless Communications 2006, 22-24 May 2006, Krakow, Poland.

Jacob, Mohan, Krupka, Jerzy, Derzakowski, Krzysztof, and Mazierska, Janina (2006) Measurements of thin polymer films employing split post dielectric resonator technique. In: Proceedings of the 2006 International Conference on Microwaves, Radar & Wireless Communications. pp. 229-231. From: MIKON 2006 International Conference on Microwaves, Radar & Wireless Communications 2006, 22-24 May 2006, Krakow, Poland.

Jafari, Seid Mahdi, He, Yinghe, and Bhandari, Bhesh (2006) Nano-emulsion production by sonication and microfluidization: a comparison. International Journal of Food Properties, 9 (3). pp. 475-485.

Jacob, Mohan V., Krupka, Jerzy, Mazierska, Janina, and Bialkowski, Merek (2006) Temperature dependence of complex permittivity of planar microwave materials. In: 2006 Asia-Pacific Microwave Conference Proceedings (3) FR1C-2. pp. 1453-1456. From: APMC 2006 Asia Pacific Microwave Conference 2006, 12-15 December 2006, Yokohama, Japan.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2005) Dielectric properties of Yttrium Vanadate crystals from 15 K to 295 K. Journal of Electroceramics, 15 (3). pp. 237-241.

Jacob, M.V., and Mazierska, J. (2005) Planar Ba(MgxTay)O3 material for emerging microwave technologies. In: Proceedings of IEEE TENCON Conference 2005. pp. 1-5. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

James, M.K., and Mason, L.B. (2005) Synthetic tropical cyclone database. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 131 (4). pp. 181-192.

Jacob, M.V., Sundaresan, A., Mazierska, J., and Tanaka, Y. (2005) Investigations on microwave power dependence of high quality TI-1223 thin films on LSAT substrate. IEEE Transactions on Applied Superconductivity, 15 (2). pp. 3596-3599.

Jacob, M.V., Mazierska, J., Harada, Y., Takahashi, T., and Yoshizawa, M. (2005) Microwave characterization of as-grown MgB2 thin films prepared by molecular beam epitaxy. IEEE Transactions on Applied Superconductivity, 15 (2). pp. 3317-3320.

Jegatheesan, Veeriah, Vigneswaran, Saravanamuth, and Lee, Seung-Hwan (2005) Deposition of submicron particles in deep bed filtration under unfavorable conditions. Korean Journal of Chemical Engineering, 22 (1). pp. 142-146.

Jacob, Mohan V. (2005) Are the parameters Q0xf0, temperature coefficient of frequency and temperature coefficient of permittivity fundamental material constants? In: Proceedings of IEEE TENCON Conference 2005. pp. 1-5. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

Jegatheesan, V., and Vigneswaran, S. (2005) Deep bed filtration: mathematical models and observations. Critical Reviews in Environmental Science and Technology, 35. pp. 515-569.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2005) Low temperature complex permittivity of MgF2 at microwave frequencies from TE01δ Modes. In: Proceedings of Asia Pacific Microwave Conference 2005. pp. 3455-3458. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Jacob, Mohan V. (2005) Low temperature microwave characterisation of lithium fluoride at different frequencies. Science and Technology of Advanced Materials, 6 (8). 944- 949.

Jacob, Mohan V., Mazierska, Janina, and Bialkowski, Marek (2005) Measurement of complex permittivity of low temperature co-fired ceramic at cryogenic temperatures. In: Proceedings of the 29th International Conference on Advanced Ceramics and Composites (26) pp. 209-216. From: 29th International Conference on Advanced Ceramics and Composites, 23-28 January 2005, Florida, USA.

Jacob, Mohan V., Mazierska, Janina, and Krupka, J. (2005) Microwave characterisation of calcium fluoride in the temperature range 15-300 K. In: Proceedings of the 29th International Conference on Advanced Ceramics and Composites (26) pp. 161-168. From: 29th International Conference on Advanced Ceramics and Composites, 23-28 January 2005, Florida, USA.

Jafari, Seid, Bhandari, Bhesh, and He, Yinghe (2005) Optimization of nano-emulsion production by sonication and microfluidization. In: Proceedings of 33rd Australasian Chemical Engineering Conference. pp. 1-6. From: Chemeca 2005 33rd Australasian Chemical Engineering Conference, 25-28 September 2005, Brisbane, QLD, Australia.

Jegatheesan, Veeriah, Kastl, George, Fisher, Ian, Chandy, Joseph, and Angles, Mark (2004) Modelling bacterial growth in drinking water: effect of nutrients. American Water Works Association, 96 (5). pp. 129-141.

Jacob, Mohan V., Mazierska, Janina, and Krupka, Jerzy (2004) A cryogenic post dielectric resonator for precise microwave characterization of planar dielectric materials for superconducting circuits. Superconductor Science & Technology, 17 (3). pp. 358-362.

Jacob, Mohan V., Mazierska, Janina, and Takeuchi, Seiichi (2004) Investigations on microwave characteristics of MgF2 at cryogenic temperatures. In: Proceedings of TENCON 2004 Conference (3) pp. 558-561. From: TENCON 2004 IEEE Region 10 Conference, 21 - 24 November 2004, Chiang Mai, Thailand.

Jacob, Mohan V. (2004) Low temperature microwave characterisation of lithium fluoride. In: Proceedings of Asia Pacific Microwave Conference 2004. pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Jacob, M.V., Mazierska, J., and Krupka, J. (2004) Microwave characterization of (La, Sr)(Ai,Ta)O3 using TE011 mode dielectric resonator. Transactions of the Materials Research Society of Japan, 29 (4). pp. 1093-1096.

Jacob, Mohan V., Mazierska, Janina, Knack, Adrian, and Takeuchi, Seiichi (2004) Miniaturized 10-pole superconducting filter on MgO substrate for mobile communication. In: Proceedings of TENCON 2004 Conference (3) pp. 554-557. From: TENCON 2004 IEEE Region 10 Conference, 21 - 24 November 2004, Chiang Mai, Thailand.

Jacob, M.V., Mazierska, J., and Knack, A. (2004) Narrowband superconducting filters for mobile communication. Transactions of the Materials Research Society of Japan, 29 (4). pp. 1273-1276.

Jacob, Mohan. V., Hartnett, John G., Mazierska, Janina, Giordano, Vincent, Krupka, Jerzy, and Tobar, Michael E. (2004) Temperature dependence of permittivity and loss tangent of Lithium Tantalate at microwave frequencies. IEEE Transactions on Microwave Theory and Techniques, 52 (2). pp. 536-541.

Jacob, Mohan V., Mazierska, Janina, Leong, Kenneth, Ledenyov, Dimitri, and Krupka, Jerzy (2003) Surface resistance measurements of HTS thin films using SLAO dielectric resonator. IEEE Transactions on Applied Superconductivity, 13 (2). pp. 2909-2912.

Jacob, Mohan V., and Mazierska, Janina (2003) Precise microwave characterisation of YBa2Cu3O7−δ films on sapphire and lanthanum aluminate substrates. Journal of Low Temperature Physics, 131 (3-4). pp. 647-651.

Jacob, Mohan V., Mazierska, Janina, and Lorenz, Michael (2003) Surface resistance measurements of surface and interface sides of YBa2Cu3O7 films on sapphire and LaAlO3. Superconductor Science & Technology, 16 (3). pp. 412-415.

Jegatheesan, V., and Shu, L. (2003) Application of novel technologies in water reclamation, reuse and recycle. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Waterqual 2003 IWA-Asia Pacific Regional Conference, 19-23 October 2003, Bangkok, Thailand.

Jegatheesan, V., Shu, L., Streeter, M., and Fracchia, H. (2003) Efficient management of drinking water distribution systems through the application of water quality modelling. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. - . From: Asian Waterqual 2003 IWA-Asia Pacific Regional Conference, 19-23 October 23, Bangkok, Thailand.

Jacob, M.V., Hartnett, J.G., Mazierska, J., Krupka, J., and Tobar, M.E. (2003) Lithium tantalate - a high permittivity dielectric material for microwave communication systems. In: Proceedings of Tencon 2003: conference on convergent technologies for Asia-Pacific Region. From: Tencon 2003: conference on convergent technologies for Asia-Pacific Region, 15-17 October 2003, Bangalore, India.

Jegatheesan, V., and Vigneswaran, S. (2003) Mathematical modelling of deep bed filtration. In: Proceedings of MODSIM 2003 International Congress on Modelling and Simulation (4) pp. 1805-1810. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

Jacob, Mohan V., Mazierska, Janina, Ledenyov, Dimitri, and Krupka, Jerzy (2003) Microwave characterisation of CaF2 at cryogenic temperatures using a dielectric resonator technique. Journal of the European Ceramic Society, 23 (14). pp. 2617-2622.

Jacob, Mohan V., Mazierska, Janina, Krupka, Jerzy, Ledenyov, Dimitri, and Takeuchi, Seiichi (2003) Microwave properties of Yttrium Vanadate crystals at cryogenic temperatures. In: Proceedings of Symposium F: Electromagnetic Materials. pp. 232-235. From: ICMAT 2003 International Conference on Materials for Advanced Technologies, 7-12 December 2003, Singapore.

Jacob, Mohan V., Mazierska, Janina, and Takeuchi, Seiichi. (2003) Miniaturized superconducting filter for mobile communications. In: IEEE TENCON - Convergent Technologies for the Asia Pacific Region (2) pp. 631-634. From: IEEE TENCON 2003 Conference on Convergent Technologies for the Asia-Pacific Region, 15-17 October 2003, Bangalore, India.

Johnson, K., Christensen, M., Sivakugan, S., and Karunasena, W. (2003) Simulating the response of shallow foundations using finite element modelling. In: Proceedings of the MODSIM 2003 International Congress on Modelling and Simulation. pp. 2060-2065. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

Jegatheesan, V., and Manicom, C. (2003) Sustainable aquaculture through water recycling. In: Proceedings of the First International Symposium on Southeast Asian Water Environment. From: First International Symposium on Southeast Asian Water Environment, 23-25 October 2003, Bangkok, Thailand.

Jegatheesan, V., Kastl, G., Fisher, I., Chandy, J., and Angles, M. (2003) Water quality modelling for drinking water distribution systems. In: Proceedings of MODSIM 2003 International Congress on Modelling and Simulation (1) pp. 332-337. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia.

James, Maurice K., Armsworth, Paul R., Mason, Luciano B., and Bode, Lance (2002) The structure of reef fish metapopulations: modelling larval dispersal and retention patterns. Proceedings of the Royal Society of London Series B, Biological Sciences, 269. pp. 2079-2086.

Jacob, Mohan V., Mazierska, Janina, Savvides, Nick, Ohshima, Shigetoshi, and Oikawa, Shinichro (2002) Comparison of microwave properties of YBCO films on MgO and LaAlO3 substrates. Physica C: Superconductivity and its Applications, 372 (1). pp. 474-477.

Jegatheesan, V., Lamsal, P.R., Visvanathan, C., Ngo, H.H., and Shu, L. (2002) Effect of natural organic compounds on the removal of organic carbon in coagulation and flocculation processes. Water Science and Technology, 2 (5/6). pp. 473-479.

Jacob, Mohan V., Mazierska, Janina, Leong, Kenneth, and Krupka, Jerzy (2002) Microwave properties of low-loss polymers at cryogenic temperatures. IEEE Transactions on Microwave Theory and Techniques, 50 (2). pp. 474-480.

Jacob, M.V., Mazierska, J., Leong, K., and Krupka, J. (2001) Novel method for calculation and measurement of unloaded Q-factor of superconducting dielectric resonators. In: Microwave Symposium Digest 2001 (3) pp. 1993-1996. From: 2001 IEEE MTT-S International Microwave Symposium, 20-25 May 2001, Phonenix, AZ.

Jacob, Mohan, Mazierska, Janina, Leong, Kenneth, and Krupka, Jerzy (2001) Simplified method for measurements and calculations of coupling coefficients and Q^o factor of high-temperature superconducting dielectric resonators. IEEE Transactions on Microwave Theory and Techniques, 49 (12). 2401- 2407.

Jacob, Mohan V., Mazierska, Janina, and Srivastava, G.P. (1999) Modeling of nonlinear surface impedance of high-Tc superconductors using an exponential vortex penetration model. Journal of Superconductivity, 12 (2). pp. 377-384.

Jacob, Mohan V., Mazierska, Janina, Kim, Jeha, Kang, Kwang-Yong, and Srivastava, G.P. (1998) Microwave and microstructural studies of silver-doped YBa2Cu3O7-δ thin films. Superconductor Science & Technology, 11 (11). pp. 1217-1221.

Janardhanan, Sreekanth (2012) Integrated multi-objective management of saltwater intrusion in coastal aquifers using coupled simulation-optimisation and monitoring feedback information. PhD thesis, James Cook University.

Jayasinghe, Nandana Chana (2012) The distribution of wind loads and vulnerability of metal clad roofing structures in contemporary Australian houses. PhD thesis, James Cook University.

K

Kong, Zhengmin, Ouyang, Hui, Cao, Yiyuan, Huang, Tao, Ahn, Euijoon, Zhang, Maoqi, and Liu, Hunan (2023) Automated periodontitis bone loss diagnosis in panoramic radiographs using a bespoke two-stage detector. Computers in Biology and Medicine, 152. 106374.

Kannan, M. Bobby, Rahuma, Mohamed, Khakbaz, Hadis, and Melchers, Robert (2022) Antipsychotic drug waste: A potential corrosion inhibitor for mild steel in the oil and gas industry. Waste Management, 145. pp. 38-47.

Krishnamenon, Madhumenon, Tuladhar, Rabin, Rahimi Azghadi, Mostafa, Loughran, Jeffrey G., and Pandey, Govinda (2022) Digital twins and their significance in engineering asset management. In: Proceedings of the International Conference on Maintenance and Intelligent Asset Management. From: ICMIAM 2021: International Conference on Maintenance and Intelligent Asset Management, 12-15 December 2021, Ballarat, VIC, Australia.

Kumar, Ravinder, Vuppaladadiyam, Arun K., Dos Santos Antunes, Elsa, Whelan, Anna, Fearon, Rob, Sheehan, Madoc, and Reeves, Louise (2022) Emerging contaminants in biosolids: presence, fate and analytical techniques. Emerging Contaminants, 8. pp. 162-194.

Kamel, Michael S.A., Al-Jumaili, Ahmed, Oelgemoeller, Michael, and Jacob, Mohan V. (2022) Inorganic nanoparticles to overcome efficiency inhibitors of organic photovoltaics: An in-depth review. Renewable and Sustainable Energy Reviews, 166. 112661.

Kamel, Michael S.A., Oelgemöller, Michael, and Jacob, Mohan V. (2022) Sustainable plasma polymer encapsulation materials for organic solar cells. Journal of Materials Chemistry A, 10 (9). pp. 4683-4694.

Khakbaz, Hadis, Ruberu, Kalani, Kang, Lingzhi, Talebian, Sepehr, Sayyar, Sepidar, Filippi, Benjamin, Khatamifar, Mehdi, Beirne, Stephen, and Innis, Peter C. (2021) 3D printing of highly flexible, cytocompatible nanocomposites for thermal management. Journal of Materials Science, 56. pp. 6385-6400.

Krupka, Jerzy, Kopyt, Paweł, Czekala, Piotr, Salski, Bartłomiej, Derzakowski, Krzysztof, and Mazierska, Janina (2021) Complex permittivity of mixtures of sand with aqueous NaCl solutions measured at 2.5 GHz. In: Proceedings of the 13th International Conference on Electromagnetic Wave Interaction with Water and Moist Substances. From: ISEMA 2021: 13th International Conference on Electromagnetic Wave Interaction with Water and Moist Substances, 23-30 July 2021, Kiel, Germany.

Khatamifar, Mehdi, Lin, Wenxian, and Dong, Liqiang (2021) Transient conjugate natural convection heat transfer in a differentially-heated square cavity with a partition of finite thickness and thermal conductivity. Case Studies in Thermal Engineering, 25. 100952.

Kuskopf, L., Sheehan, M., and Whelan, A. (2020) Contaminants of emerging concern: developing a sampling and analysis quality plan for the Cleveland Bay Sewage Treatment Plant. Water e-journal, 5 (3).

Kharbech, Sofiane, Simon, Eric Pierre, Belazi, Akram, and Xiang, Wei (2020) Denoising higher-order moments for blind digital modulation identification in multiple-antenna systems. IEEE Wireless Communications Letters, 9 (6). pp. 765-769.

Kumar, Tarun, Stephen, Roger, Zaeimi, Mohammad, and Wheatley, Greg (2020) Formula SAE rear suspension design. Mobility & Vehicle Mechanics, 46 (2). pp. 1-18.

Kumar, Avishek, Al-Jumaili, Ahmed, Bazaka, Kateryna, Mulvey, Peter, Warner, Jeffrey, and Jacob, Mohan V. (2020) In-Situ surface modification of terpinen-4-ol plasma polymers for increased antibacterial activity. Materials, 13 (3). 586.

Kabir, Humayun, Khan, Mohammad Jamal, Brodie, Graham, Gupta, Dorin, Pang, Alexis, Jacob, Mohan V., and Antunes, Elsa (2020) Measurement and modelling of soil dielectric properties as a function of soil class and moisture content. Journal of Microwave Power and Electromagnetic Energy, 54 (1). pp. 3-18.

Kumar, Avishek, Al-Jumaili, Ahmed, Prasad, Karthika, Bazaka, Kateryna, Mulvey, Peter, Warner, Jeffrey, and Jacob, Mohan (2020) Pulse plasma deposition of Terpinen-4-ol: an insight into polymerization mechanism and enhanced antibacterial response of developed thin films. Plasma Chemistry and Plasma Processing, 40. pp. 339-355.

Kidgell, Joel T., Glasson, Christopher R.K., Magnusson, Marie, Vamvounis, George, Sims, Ian M., Carnachan, Susan M., Hinkley, Simon F.R., Lopata, Andreas L., de Nys, Rocky, and Taki, Aya C. (2020) The molecular weight of ulvan affects the in vitro inflammatory response of a murine macrophage. International Journal of Biological Macromolecules, 150. pp. 839-848.

Kumar, Ravinder, Strezov, Vladimir, Lovell, Emma, Kan, Tao, Weldekidan, Haftom, He, Jing, Dastjerdi, Behnam, and Scott, Jason (2019) Bio-oil upgrading with catalytic pyrolysis of biomass using Copper/zeolite-Nickel/zeolite and Copper-Nickel/zeolite catalysts. Bioresource Technology, 279. pp. 404-409.

Kazum, Oluwole, Ionescu, Mihail, Beladi, Hossein, and Kannan, M. Bobby (2019) Hydrogen depth profiles and microhardness of electrochemically hydrogen-charged nanostructured bainitic steels. International Journal of Hydrogen Energy, 44 (26). pp. 14064-14069.

Khan, M.J., Brodie, G., Gupta, D., and He, J. (2019) Microwave soil treatment increases soil nitrogen supply for sustained wheat productivity. Transactions of the ASABE, 62 (2). pp. 355-362.

Kikkert, Cornelis Jan (2019) A phasor measurement unit algorithm using IIR filters for FPGA implementation. Electronics, 8 (12). 1523.

Kumar, Avishek, Mills, Scott, Bazaka, Kateryna, Bajema, Nigel, Atkinson, Ian, and Jacob, Mohan V. (2018) Biodegradable optically transparent terpinen-4-ol thin films for marine antifouling applications. Surface and Coatings Technology, 349. pp. 426-433.

Kannan, M. Bobby, Walter, R., Yamamoto, A., Khakbaz, H., and Blawert, C. (2018) Electrochemical surface engineering of magnesium metal by plasma electrolytic oxidation and calcium phosphate deposition: biocompatibility and in vitro degradation studies. RSC Advances, 8 (51). pp. 29189-29200.

Kazum, O., Beladi, H., and Kannan, M. Bobby (2018) Hydrogen permeation in twinning-induced plasticity (TWIP) steel. International Journal of Hydrogen Energy, 43 (50). pp. 22685-22693.

Khan, M.J., Brodie, G., Gupta, D., and Foletta, S. (2018) Microwave soil treatment improves weed management in Australian dryland wheat. Transactions of the ASABE, 61 (2). pp. 671-680.

Kumar, Avishek, Grant, Daniel S., Bazaka, Kateryna, and Jacob, Mohan V. (2018) Tailoring terpenoid plasma polymer properties by controlling the substrate temperature during PECVD. Journal of Applied Polymer Science, 135 (5). 45771.

Kannan, M. Bobby, and Ronan, Karly (2017) Conversion of biowastes to biomaterial: an innovative waste management approach. Waste Management, 67. pp. 67-72.

Khatamifar, Mehdi, Lin, Wenxian, Armfield, S.W., Holmes, David, and Kirkpatrick, M.P. (2017) Conjugate natural convection heat transfer in a partitioned differentially-heated square cavity. International Communications in Heat and Mass Transfer, 81. pp. 92-103.

Kannan, M. Bobby, Moore, Corey, Saptarshi, Shruti, Somasundaram, Sahadev, Rahuma, Mohamed, and Lopata, Andreas L. (2017) Biocompatibility and biodegradation studies of a commercial zinc alloy for temporary mini-implant applications. Scientific Reports, 7. 15605.

Kazum, Oluwole, and Kannan, M. Bobby (2017) Effect of cathodic hydrogen-charging current density on the hydrogen diffusivity in nanostructured bainitic steels. Materials Science and Technology, 33 (13). pp. 1548-1552.

Kumar, Avishek, Grant, Daniel, Alancherry, Surjith, Al-Jumaili, Ahmed, Bazaka, Kateryna, and Jacob, Mohan V. (2017) Plasma polymerization: electronics and biomedical application. In: Rawat, Rajdeep Singh, (ed.) Plasma Science and Technology for Emerging Economies. Springer, Singapore, pp. 593-657.

Kannan, M. Bobby, Khakbaz, Hadis, and Yamamoto, A. (2017) Understanding the influence of HEPES buffer concentration on the biodegradation of pure magnesium: an electrochemical study. Materials Chemistry and Physics, 197. pp. 47-56.

Khan, M.J., Brodie, G., and Gupta, D. (2017) The effect of microwave soil treatment on rice production under field production. Transactions of the ASABE, 60 (2). pp. 517-525.

Khatamifar, M., Lin, W., Holmes, D., Armfield, S.W., and Kirkpatrick, M.P. (2016) Transient laminar conjugate natural convection in a cavity with a finite thickness and conductivity partition. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. 672. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.

Kannan, M. Bobby, Walter, R., and Yamamoto, A. (2016) Biocompatibility and in vitro degradation behavior of magnesium–calcium alloy coated with calcium phosphate using an unconventional electrolyte. ACS Biomaterials Science & Engineering, 2 (1). pp. 56-64.

Kumar, Ravinder, Singh, Lakhveer, and Zularisam, A. Wahid (2016) Exoelectrogens: Recent advances in molecular drivers involved in extracellular electron transfer and strategies used to improve it for microbial fuel cell applications. Renewable and Sustainable Energy Reviews, 56. pp. 1322-1336.

Kazum, Oluwole, Beladi, Hossein, Timokhina, Ilana B., He, Yinghe, and Kannan, M. Bobby (2016) Hydrogen permeation in nanostructured bainitic steel. Metallurgical and Materials Transactions A, 47A (10). pp. 4896-4903.

Kazum, O., and Mathan, M. Bobby (2016) Optimising parameters for galvanostatic polyaniline coating on nanostructured bainitic steel. Surface Engineering, 32 (8). pp. 607-6014.

Kumar, Ravinder, Singh, Lakhveer, Zularisam, A.W., and Hai, I. Faisal (2016) Potential of porous Co3O4 nanorods as cathode catalyst for oxygen reduction reaction in microbial fuel cells. Bioresource Technology, 220. pp. 537-542.

Kikkert, Cornelis Jan, and Zhu, Schucheng (2016) Resistive shunt on-line impedance analyzer. In: Proceedings of the 2016 International Symposium on Power Line Communications and it's Applications. pp. 150-155. From: ISPLC: 2016 International Symposium on Power Line Communications and it's Applications, 20-23 March 2016, Bottrop, Germany.

Kault, David, and Kault, Sam (2015) From p-values to objective probabilities in assessing medical treatments. PLoS ONE, 10 (11). e0142132. pp. 1-19.

Kraatz, Kelly, Dahal, Paricxit, Zahedi, Ahmad, and McPhail, Don (2015) Distribution network configurations for demand matching with photovoltaic systems. In: Proceedings of the Australasian Universities Power Engineering Conference. 16. pp. 1-4. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong,NSW, Australia.

Kraatz, Kelly, and Zahedi, Ahmad (2015) Energy management and control strategies of electric vehicle integrated into the Smart Grid. In: Proceedings of the Australasian Universities Power Engineering Conference. 15. pp. 1-5. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Khuntia, Sunil, Mujtaba, Hassan, Patra, Chittaranjan, Farooq, Khalid, Sivakugan, Nagaratnam, and Das, Braja M. (2015) Prediction of compaction parameters of coarse grained soil using multivariate adaptive regression splines (MARS). International Journal of Geotechnical Engineering, 9 (1). pp. 79-88.

Kikkert, Cornelis Jan, and Zhu, Shucheng (2015) Measurement of powerlines and devices using an inductive shunt on-line impedance analyzer. In: Proceedings of the 2015 International Symposium on Power Line Communications and it's Applications. pp. 41-46. From: ISPLC: 2015 International Symposium on Power Line Communications and it's Applications, 29-31 March 2015, Austin, TX, USA.

Khatamifar, M., D’Urso, R,, Lin, W., Holmes, D., Armfield, S.W., and Kirkpatrick, M.P. (2014) A numerical and experimental study on the unsteady conjugate natural convection boundary layers in a water filled rectangular cavity with a conducting partition wall at varied locations. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. 324. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Kerans, Andrew, and Mazierska, Janina (2014) High Temperature Superconducting filters to enable high power Public Safety Mobile Broadband. In: Proceedings of 2014 Asia-Pacific Microwave Conference. TH1A-2. pp. 402-404. From: APMC 2014: Asia-Pacific Microwave Conference, 4-7 November 2014, Sendai, Japan.

Kazum, Oluwole, Kannan, Mathan Bobby, Beladi, Hossein, Timokhina, Ilana, Hodgson, Peter, and Khoddam, Shahin (2014) Selective dissolution of retained austenite in nanostructured bainitic steels. Advanced Engineering Materials, 16 (4). pp. 442-444.

Kazum, O., Mathan, M. Bobby, Beladi, H., Timokhina, I.B., Hodgson, P.D., and Khoddam, S. (2014) Aqueous corrosion performance of nanostructured bainitic steel. Materials & Design, 54. pp. 67-71.

Kannan, M. Bobby (2014) Challenges and opportunities in electrochemically coating calcium phosphate on magnesium alloys for biodegradable implant applications. Materials Science Forum, 783-786. pp. 1269-1273.

Kerans, Andrew J., and Mazierska, Janina (2014) Protection of primary users in areas where cognitive radio is deployed. In: Proceedings of the 8th International Conference on Signal Processing and Communication Systems. pp. 1-5. From: ICSPCS 2014: 8th International Conference on Signal Processing and Communication Systems, 15 -17 December 2014, Gold Coast, QLD, Australia.

Khakbaz, Hadis, Walter, Rhys, Gordon, Timothy, and Mathan, M. Bobby (2014) Self-dissolution assisted coating on magnesium metal for biodegradable bone fixation devices. Materials Research Express, 1 (4). 035406. pp. 1-9.

Kannan, M. Bobby , and Liyanaarachchi, S. (2013) Hybrid coating on a magnesium alloy for minimizing the localized degradation for load-bearing biodegradable mini-implant applications. Materials Chemistry and Physics, 142 (1). pp. 350-354.

Kazum, O., and Mathan, M. Bobby (2013) Galvanostatic polymerisation of aniline on steel: improving the coating performance in chloride-containing environment. Synthetic Metals, 180. pp. 54-58.

Kannan, M. Bobby (2013) Improving the packing density of calcium phosphate coating on a magnesium alloy for enhanced degradation resistance. Journal of Biomedical Materials Research Part A, 101A (5). pp. 1248-1254.

Krupka, J., Wosik, J., Jastrzebski, C., Ciuk, T., Mazierska, J., and Zdrojek, M. (2013) Complex conductivity of YBCO films in normal and superconducting states probed by microwave measurements. IEEE Transactions on Applied Superconductivity, 23 (2). 1501011. pp. 1-11.

Kannan, M. Bobby, Raman, R.K. Singh, Khodham, S., and Liyanaarachchi, S. (2013) Corrosion behavior of twinning-induced plasticity (TWIP) steel. Materials and Corrosion, 64 (3). pp. 231-235.

Kazum, O., Kannan, M. Bobby, Scharnagl, N., Blawert, C., and He, Y. (2013) Electrochemical corrosion behaviour of WE54 magnesium alloy. Materials Science Forum, 765. pp. 644-647.

Kazum, O., and Kannan, M. Bobby (2013) Galvanostatic coating of polyaniline on steel. In: Proceedings of the Australasian Corrosion Association Annual Conference. 70. pp. 1-6. From: ACA 2013: Australasian Corrosion Association Annual Conference, 10-13 November 2013, Brisbane, QLD, Australia.

Kim, P.Y., and Ginger, J.D. (2013) Internal pressures in buildings with a dominant opening and background porosity. Wind & Structures, 16 (1). pp. 47-60.

Kannan, M. Bobby, and Wallipa, O. (2013) Potentiostatic pulse-deposition of calcium phosphate on magnesium alloy for temporary implant applications: an in vitro corrosion study. Materials Science and Engineering C, 33 (2). pp. 675-679.

Kikkert, Cornelius J. (2013) RF Electronics: design and simulation. James Cook University, Townsville, QLD, Australia.

Kannan, M. Bobby (2013) Role of recrystallized grains on the environment-assisted cracking of aluminium-alloy. Materials Science Forum, 753. pp. 489-492.

Kikkert, Cornelis Jan (2013) An on-line PLC frequency impedance analyzer. In: Proceedings of the IEEE International Conference on Smart Grid Communications. pp. 606-611. From: IEEE International Conference on Smart Grid Communications, 21-24 October 2013, Vancouver, BC, Canada.

Kannan, M. Bobby, and Dietzel, W. (2012) Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy. Materials and Design, 42. pp. 321-326.

Kannan, M. Bobby, Koc, Erkan, and Unal, Mehmet (2012) Biodegradability of β-Mg17Al12 phase in simulated body fluid. Materials Letters, 82. pp. 54-56.

Kannan, M. Bobby (2012) Enhancing the performance of calcium phosphate coating on a magnesium alloy for bioimplant applications. Materials Letters, 76. pp. 109-112.

Kannan, M. Bobby, and Saji, V.S. (2012) Nanoscience and biomaterial corrosion control. In: Saji, Viswanathan S., and Cook, Ronald, (eds.) Corrosion Protection and Control Using Nanomaterials. Elsevier, Cambridge, UK, pp. 375-392.

Kikkert, Cornelis Jan (2012) A PLC frequency model of 3 phase power distribution transformers. In: 2012 IEEE Third International Conference on Smart Grid Communications (SmartGridComm). pp. 205-210. From: 2012 IEEE Third International Conference on Smart Grid Communications (SmartGridComm), 5-8 November 2012, Tainan City, Taiwan.

Krupka, Jerzy, and Mazierska, Janina (2011) Current developments in contactless measurements of high quality materials for microelectronics and nanotechnology employing dielectric resonator techniques. In: Proceedings of the 2011 IEEE Region 10 Conference. T07.01.4. pp. 1126-1130. From: TENCON 2011: 2011 IEEE Region 10 Conference, 22-24 November 2011, Bali, Indonesia.

Kikkert, Keith (2011) Calculating radiation from power lines for power line communications. In: Perutka, Karel, (ed.) MATLAB for Engineers - Applications in Control, Electrical Engineering, IT and Robotics. InTech, Rijeka, Croatia, pp. 223-246.

Kannan, M. Bobby, and He, Yinghe (2011) In-vitro degradation behavior of biodegradable polymer coated magnesium alloy. In: Proceedings of CHEMECA 2011. pp. 1-7. From: CHEMECA 2011: engineering a better world, 18-21 September 2011, Sydney, NSW, Australia.

Krupka, Jerzy, Nguyen, Danh, and Mazierska, Janina (2011) Microwave and RF methods of contactless mapping of the sheet resistance and the complex permittivity of conductive materials and semiconductors. Measurement Science and Technology, 22 (8). 085703. pp. 1-6.

Kannan, M. Bobby, Blawert, C., and Dietzel, W. (2011) Electrochemical corrosion behaviour of ZE41 and QE22 magnesium alloys. Materials Science Forum, 690. pp. 385-388.

Khan, S. Jamal, Ilyas, Shazia, Javid, Sadaf, Visvanathan, C., and Jegatheesan, V. (2011) Performance of suspended and attached growth MBR systems in treating high strength synthetic wastewater. Bioresource Technology, 102 (9). pp. 5331-5336.

Kannan, M. Bobby, Raman, R.K. Singh, Witte, F., Blawert, C., and Dietzel, W. (2011) Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 96B (2). pp. 303-309.

Kanta, A-F., Montavon, G., Berndt, C.C., Planche, M-P., and Coddet, C. (2011) Intelligent system for prediction and control: application in plasma spray process. Expert Systems with Applications, 38 (1). pp. 260-271.

Kikkert, Cornelis Jan (2011) Effect of couplers and line branches on PLC communication channel response. In: Proceedings of 2011 IEEE International Conference on Smart Grid Communications. pp. 327-332. From: 2011 IEEE International Conference on Smart Grid Communications, 17-20 October 2011, Brussels, Belgium.

Kikkert, Cornelis Jan (2011) MV to LV Transformer PLC Bypass Coupling Networks for a Low Cost Smart Grid Rollout. In: Proceedings of 2011 IEEE PES Innovative Smart Grid Technologies. pp. 1-6. From: 2011 IEEE PES Innovative Smart Grid Technologies, 13-16 November 2011, Perth, WA, Australia.

Kikkert, Cornelis Jan (2011) Power transformer modelling and MV PLC coupling networks. In: Proceedings of 2011 IEEE PES Innovative Smart Grid Technologies. pp. 1-6. From: 2011 IEEE PES Innovative Smart Grid Technologies, 13-16 November 2011, Perth, WA, Australia.

Kannan, M. Bobby, Bala Srinivasan, P., and Raja, V.S. (2011) Stress corrosion cracking (SCC) of aluminium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 307-340.

Kannan, M. Bobby, and Shukla, P.K. (2011) Stress corrosion cracking (SCC) of copper and copper-based alloys. In: Raja, V.S., and Shoji, Tetsuo, (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 409-426.

Kannan, M. Bobby, and Raja, V.S (2010) Enhancing the localized corrosion resistance of high strength 7010 Al-alloy. Advanced Materials Research, 138. pp. 1-6.

Kannan, M. Bobby, and Raman, R.K. Singh (2010) A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques. Journal of biomedical materials research, 93a (3). pp. 1050-1055.

Kikkert, Cornelis Jan (2010) The effect of filters in mobile radio systems. EE: Evaluation Engineering, 49 (4). pp. 34-38.

Kannan, M. Bobby (2010) Influence of microstructure on the in-vitro degradation behaviour of magnesium alloys. Materials Letters, 64 (6). pp. 739-742.

Kannan, M. Bobby, He, Yinghe, and Sandham, Andrew (2010) Calcium phosphate deposition on magnesium alloy for bioimplant applications. Materials Science Forum, 654-656. pp. 2196-2199.

Kikkert, C.J. (2010) Modeling power transformers for the design of SWER line coupling networks. In: Proceedings of First IEEE International Conference on Smart Grid Communications. pp. 120-125. From: First IEEE SmartGrid Communications Conference, 4-6 October 2010, Gaithersburg, MD, USA.

Kikkert, Cornelis Jan (2010) Modelling power transformers at power line carrier frequencies. In: Proceedings of 2010 Electricity Engineers' Association Conference. pp. 1-6. From: 2010 EEA Electricity Engineers' Association Conference, 17 - 18 June 2010, Christchurch, New Zealand.

Kikkert, Cornelis Jan (2010) Radiation from powerlines due to PLC for smart grid applications. In: Proceedings of 2010 Electricity Engineers' Association (EEA) Conference. pp. 1-10. From: 2010 Electricity Engineers' Association (EEA) Conference, 17 - 18 June 2010, Christchurch, New Zealand.

Khan, S. Jamal, Visvanathan, C., and Jegatheesan, V. (2009) Prediction of membrane fouling in MBR systems using empirically estimated specific cake resistance. Bioresource Technology, 100 (23). pp. 6133-6136.

Kikkert, C.J., and Reid, G.D. (2009) Radiation and attenuation of Single Wire Earth Return power lines at LF frequencies. In: Proceedings of 2009 IEEE International Symposium on Power Line Communications and its Applications. pp. 68-72. From: 2009 IEEE International Symposium on Power Line Communications and its Applications, 29 March - 1 April 2009, Dresden, Germany.

Kikkert, Cornelis J., and Reid, Geoffrey D. (2009) Is Broadband over Power-lines dead? In: Proceedings from the Australasian Telecommunications Networks and Applications Conference 2009. pp. 1-6. From: Australasian Telecommunications Networks and Applications Conference ATNAC 2009, 10 -12 November 2009, Canberra, ACT, Australia.

Kannan, M. Bobby, and R.K. Singh, Raman (2009) Magnesium alloys as biodegradable implants. Materials Science Forum, 618-619. pp. 83-86.

Kikkert, Cornelis Jan, and Reid, Geoffrey (2009) Radiation and attenuation of communication signals on power lines. In: Proceedings of the Seventh International Conference on Information, Communication and Signal Processing. pp. 1-5. From: Seventh International Conference on Information, Communication and Signal Processing ICICS 2009, 8-10 December 2009, Macau, China.

Kim, Peter, and Ginger, John (2009) Variation of internal pressure with size of dominant opening and volume. In: Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) . From: Proceedings of the Seventh Asia-Pacific Conference on Wind Engineering (APCWE-VII) , 8-12 November 2009, Taipei, Taiwan.

Knack, A., Mazierska, J., and Piel, H. (2008) Dielectric resonator filters for UMTS systems. In: Proceedings of the 2008 IEEE MTT-S International Microwave Workshop Series on Art of Miniaturizing RF and Microwave Passive Components . pp. 30-33. From: 2008 IEEE MTT-S International Microwave Workshop Series on Art of Miniaturizing RF and Microwave Passive Components , 14-15 December 2008, Chengdu, China.

Kikkert, Cornelis J., and Kenny, Owen P. (2008) Digital signal processing for a Ka Band satellite beacon receiver/ radiometer. In: Proceedings of the 2008 Australasian Telecommunications Networks and Applications Conference. pp. 128-133. From: 2008 Australasian Telecommunications Networks and Applications Conference, 7-10 December 2008, Adelaide, SA, Australia.

Krupka, Jerzy, Jacob, Mohan, Givot, Bradley L., and Derzakowski, Krzysztof (2008) Measurements of thin resistive films employing split post dielectric resonator technique. In: Proceedings of MIKON 17th International Conference on Microwaves, Radar & Wireless Communications. pp. 892-895. From: MIKON 17th International Conference on Microwaves, Radar & Wireless Communications, 19-23 May 2008, Wroclaw, Poland.

Kikkert, Cornelis J., and Reid, Geoffrey D. (2008) Radiation losses from a single wire earth return power line with bends. In: Proceedings of the 2008 Australasian Telecommunications Networks and Applications Conference. pp. 158-162. From: 2008 Australasian Telecommunications Networks and Applications Conference, 7-10 December 2008, Adelaide, SA, Australia.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) The design of Ka band satellite beacon receiver. In: Proceedings of the Workshop on Applications of Radio Science 2008 Conference. - . From: Workshop on Applications of Radio Science 2008 Conference, 10-12 Feb 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) A design technique for microstrip filters. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems. pp. 1-5. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) A digital signal processing based Ka Band Satellite Beacon Receiver. In: Proceedings of 15th IEEE International Conference on Electronics, Circuits and Systems. pp. 1-4. From: 15th International Conference on Electronics, Circuits and Systems, 31 August - 3 September 2008, Malta.

Kikkert, Cornelis Jan, and Kenny, Owen Patrick (2008) A digital signal processing based Ka Band Satellite Beacon Receiver/ Radiometer. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems. pp. 1-8. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) The effect of amplifier distortion and filter type on BER of WCDMA-UMTS mobile radio systems. In: Proceedings of 2nd International Conference on Signal Processing and Communication Systems. pp. 1-7. From: 2nd International Conference on Signal Processing and Communication Systems, 15-17 December 2008, Gold Coast, QLD, Australia.

Kikkert, Cornelis Jan (2008) The effect of filter type on BER of WCDMA-UMTS mobile radio systems. In: Proceedings of 15th IEEE International Conference on Electronics, Circuits and Systems. pp. 966-969. From: 15th International Conference on Electronics, Circuits and Systems, 31 August - 3 September 2008, Malta.

Knack, Adrian, Mazierska, Janina, and Piel, H (2007) Superconducting technology: development of a CDMA base station cryogenic front end receiver. In: Proceedings of Asia Pacific Microwave Conference 2007 (1) pp. 187-190. From: Asia Pacific Microwave Conference 2007, 11-14 December 2007, Bangkok, Thailand.

Knack, Adrian P., and Mazierska, Janina (2007) Assessment of superconducting technology for urban wireless communications. In: Proceedings of International Conference on Research, Innovation and Vision for the Future-Information and Communication Technologies. pp. 53-58. From: 2007 IEEE International Conference on Research, Innovation and Vision for the Future - Information and Communication Technologies, 5-9 March 2007, Hanoi, Vietnam.

Krupka, Jerzy, and Mazierska, Janina (2007) Contactless measurements of resistivity of semiconductor wafers employing single-post and split-post dielectric-resonator techniques. IEEE Transactions on Instrumentation and Measurement, 56 (5). pp. 1839-1844.

Kikkert, Cornelius Jan (2007) Filter requirements for wideband mobile radio systems. In: Proceedings of Sixth International Conference on Information, Communications and Signal Processing,. pp. 1-5. From: ICICS 2007 Sixth International Conference on Information, Communications and Signal Processing, 10-13 December 2007, Singapore.

Kikkert, cornelis Jan (2007) The design of a Ka band satellite beacon receiver. In: Proceedings of the Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007. From: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007, 10-13 Dec 2007, Singapore.

Karunasena, W., and Williams, K. (2006) Behaviour of FRP-to-concrete bonded joints. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites. pp. 131-136. From: ACUN-5: International Composites Conference: Advanced, Infrastructure, Natural and Nanocomposites, 11-14 July 2006, Sydney, NSW, Australia.

Kapitzke, Ross (2006) Fish passage prototypes: integrating research, teaching and conservation. In: Filho, Walter Leal, and Carpenter , David, (eds.) Sustainability in the Australasian University Context. Peter Lang, Frankfurt am Main, Germany, pp. 233-249.

Karunasena, W., and Anderson, W.C. (2006) Flexural behaviour of concrete beams reinforced with internal tensile steel and external CFRP. In: Computational Methods. pp. 1793-1797. From: ICCM04 First International Conference on Computational Methods, 15-17 December 2004, Singapore.

Karunasena, Karu W., and Grice, Andrew (2006) Load-deformation behaviour prediction of timber beams externally reinforced with composite materials. In: Proceedings of the Tenth East Asia-Pacific Conference on Structural Engineering and Construction. pp. 129-134. From: EASEC10 Tenth East Asia-Pacific Conference on Structural Engineering and Construction, 3-5 August 2006, Bangkok, Thailland.

Kikkert, Cornelius J. (2006) Two novel phase-frequency detectors. In: Proceedings of the 2006 IEEE Asia Pacific Conference on Circuits and Systems . pp. 713-716. From: APCCAS 2006 IEEE Asia Pacific Conference on Circuits and Systems . APCCAS 2006, 4-7 December 2006, Singapore.

Kikkert, Cornelis Jan (2005) Dual coupled resonator local oscillator. In: Proceedings of IEEE TENCON '05 Conference. pp. 1-6. From: Tencon 2005 - 2005 IEEE Region 10 Conference , 21 - 24 November 2005, Melbourne, VIC, Australia.

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2005) Active control of connected plates using single and multiple actuators and error sensors. Journal of Sound and Vibration, 281 (1-2). pp. 73-97.

Kapitzke, Ross (2005) Multipurpose design for remediation of fish passage barriers on University Creek Road crossings, Townsville North Queensland. In: Proceedings of the Environmental Engineering and Sustainability National Conference. From: Environmental Engineering and Sustainability National Conference, 17-19 July 2005, Sydney, NSW, Australia.

Karunasena, W., and Anderson, W.C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 561-566. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Kikkert, Cornelis J., and Fitch, Peter (2004) A low cost multifrequency landmine detector. In: Proceedings of URSI Commission F Triennium Open Symposium 2004. pp. 1-9. From: URSI Commission F Triennium Open Symposium 2004, 1-4 June 2004, Cairns, QLD, Australia.

Krupka, Jerzy, Mazierska, Janina E., Jacob, Mohan V., Hartnett, John G., and Tobar, Michael E. (2004) Recent advances in measurements of permittivity and dielectric losses at microwave frequencies. In: Proceedings of SPIE - the International Society of Optical Engineering (5445) pp. 311-317. From: Microwave and Optical Technology 2003, 11-15 August 2003, Ostrava, Czech Republic.

Keir, John, Kessissoglou, Nicole J., and Norwood, Chris J. (2004) An analytical investigation of single actuator and error sensor control in connected plates. Journal of Sound and Vibration, 271 (3-5). pp. 635-649.

Kessissoglou, Nicole J. (2004) Power transmission in L-shaped plates including flexural and in-plane vibration. Journal of the Acoustical Society of America, 115 (3). pp. 1157-1169.

Kikkert, Cornelis J. (2004) Dynamic range improvements of a beacon receiver using DSP techniques. In: Proceedings of URSI Commission F Triennium Open Symposium 2004. pp. 1-8. From: URSI Commission F Triennium Open Symposium 2004, 1-4 June 2004, Cairns, QLD, Australia.

Kapitzke, IR, Brizga, SO, and Arthington, AH (2004) Impact assessment tools for determination of environmental flows in water resource planning. In: UNSPECIFIED. From: Proceedings of 5th International Symposium on Ecohydraulics, September 2004, Madrid, Spain.

Karunasena, W.M. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: Proceedings of Structural Integrity and Fracture Conference 2004. pp. 181-187. From: Structural Integrity and Fracture, 26-29 September 2004, Brisbane, QLD, Australia.

Kessissoglou, Nicole J., and Keir, John (2004) A hybrid approach to predict the vibration transmission in ship structures using a waveguide method and statistical energy analysis. In: Proceedings of 2004 Annual Conference of the Australian Acoustical Society. pp. 587-592. From: 2004 Annual Conference of the Australian Acoustical Society, 3-5 November 2004, Gold Coast, QLD, Australia.

Kault, David A. (2003) Public Domain Statistics (PDS) set-up program [software]. James Cook University, Townsville, QLD, Australia.

Kessissoglou, Nicole, Tso, Yan, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 2: active modal control. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII). pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

Kapitzke, Ross (2003) From vision to reality: the crucial role of environmental engineers in achieving sustainability. In: Proceedings of the National Environment Conference 2003. pp. 1-6. From: National Environment Conference 2003, 18-20 June 2003, Brisbane, QLD, Australia.

Kauppila, D.J., Britton, P.F., Kent, G., and Loughran, J.G. (2003) Grooving and its effect on bagasse moisture content. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists. pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Kauppila, D.J., Kent, G., and Loughran, J.G. (2003) Preliminary experimental studies into the flow of juice in roller groove conduits. In: Proceedings of the 25th Conference of the Australian Society of Sugar Cane Technologists (2003) pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Kessissoglou, Nicole J., Ragnarsson, Patrick, and Löfgren, Anders (2003) An analytical and experimental comparison of optimal actuator and error sensor location for vibration attenuation. Journal of Sound and Vibration, 260 (4). pp. 671-691.

Kessissoglou, N.J. (2002) Effects of in-plane modes on the power flow characteristics in ship structures. In: Proceedings of Annual Conference of the Australian Acoustical Society. pp. 433-442. From: Innovation in Acoustics and Vibration, 13-15 November 2002, Adelaide, Australia.

Kapitzke, IR, Matheson, MJ, and Hardy, TA (2002) Reef infrastructure guidelines: tourist pontoons. CRC Reef Research Centre Technical Report No 39 . Cooperative Research Centre for the Great Barrier Reef World Heritage Area, Townsville.

Karunasena, W., Hardeo, P., and Bosnich, G. (2002) Rehabilitation of concrete beams by externally bonding fibre composite reinforcement. In: Proceedings of ACUN-4 International Composites Conference. pp. 222-226. From: Composite Systems: Macrocomposites, Microcomposites, Nanocomposites, 21-25 July 2002, Sydney, NSW, Australia.

Kessissoglou, N.J. (2001) An analytical and experimental investigation on active control of the flexural wave transmission in a simply supported ribbed plate. Journal of Sound and Vibration, 240 (1). pp. 73-85.

Kessissoglou, Nicole J. (2001) Active attenuation of the wave transmission through an L-plate junction. Journal of the Acoustical Society of America, 110 (1). pp. 267-277.

Kauppila, D.J., Loughran, J.G., and Kent, G.A. (2001) Fundamental studies into the dewatering of prepared cane and bagasse between grooved surfaces. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 437-443.

Kauppila, D.J., Loughran, J.G., and Kent, G.A. (2001) Mechanisms governing the packing of bagasse into grooves during uniaxial compression. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 421-427.

Kessissoglou, Nicole J. (2000) Active control of the plate energy transmission in a semi-infinite ribbed plate. The Journal of the Acoustical Society of America, 107 (1). pp. 324-331.

Krupka, Jerzy, and Mazierska, Janina (2000) Single-crystal dielectric resonators for low-temperature electronics applications. IEEE Transactions on Microwave Theory and Techniques, 48 (7). pp. 1270-1274.

Kessissoglou, Nicole J., and Pan, Jie (2000) The effect of structural coincidences on the acoustic fields radiated from a ribbed plate under light fluid-loading. International Journal of Acoustics and Vibration, 5 (1). pp. 15-22.

Kauppila, D.J., and Loughran, J.G. (2000) An experimental investigation into the effect of mill orientation angle on reabsorption factor. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists (22) pp. 423-428. From: ASSCT 2000: 22nd Annual Conference of the Australian Society of Sugar Cane Technologists, 2-5 May 2000, Bundaberg, QLD, Australia.

Krupka, Jerzy, and Mazierska, Janina (1998) Improvement of accuracy in measurements of the surface resistance of superconductors using dielectric resonators. IEEE Transactions on Applied Superconductivity, 8 (4). pp. 164-167.

Krupka, J., Geyer, R.G., Baker-Jarvis, J., and Ceremuga, J. (1996) Measurements of the complex permittivity of microwave circuit board substrates using split dielectric resonator and reentrant cavity techniques. In: Proceedings of the Seventh International Conference on Dielectric Materials, Measurements and Applications. pp. 21-24. From: Seventh International Conference on Dielectric Materials, Measurements and Applications, 23-26 September 1996, Bath, UK.

Kazum, Oluwole (2018) Mechanisms of hydrogen-induced cracking in ultrahigh-strength steels. PhD thesis, James Cook University.

Kazum, Oluwole (2014) Electrochemical corrosion behaviour of nanostructured bainitic steel. Masters (Research) thesis, James Cook University.

Kim, Peter Young-Han (2012) Characteristics of internal pressures in buildings with a dominant opening. Masters (Research) thesis, James Cook University.

Keir, John (2004) An analytical and experimental investigation of active vibration control techniques on coupled plate structures. PhD thesis, James Cook University.

Kent, Geoffrey A. (2003) Increasing the capacity of Australian raw sugar factory milling units. PhD thesis, James Cook University.

L

Liu, Jianan, Xiong, Weiyi, Bai, Liping, Xia, Yuxuan, Huang, Tao, Ouyang, Wanli, and Zhu, Bing (2022) Deep instance segmentation with automotive radar detection points. IEEE Transactions on Intelligent Vehicles. (In Press)

Liu, Jianan, Bai, Liping, Xia, Yuxuan, Huang, Tao, Zhu, Bing, and Han, Qing-Long (2022) GNN-PMB: A Simple but Effective Online 3D Multi-Object Tracker without Bells and Whistles. IEEE Transactions on Intelligent Vehicles. (In Press)

Li, Ruide, Cui, Jinglu, Huang, Tao, Yang, Lei, and Shihao, Yan (2022) Optimal pulse-position modulation order and transmit power in covert communications. IEEE Transactions on Vehicular Technology. (In Press)

Liu, Ke, Huang, Tao, and Guo, Zhaoxia (2022) Classification of Pathological Images of Skin Diseases Based on Deep Learning. In: Proceedings of the 4th International Conference on Data-driven Optimization of Complex Systems. From: DOCS 2022: 4th International Conference on Data-driven Optimization of Complex Systems, 28-30 October 2022, Chengdu, China.

Lv, Zhihan, Ota, Kaoru, Lloret, Jaime, Xiang, Wei, and Bellavista, Paolo (2022) Complexity Problems Handled by Advanced Computer Simulation Technology in Smart Cities 2021. Complexity, 2022. 9847249.

Lehmann, Marc, Vamvounis, George, Bloom, Sarah, Prout, Jake, Gordon-Wright, Henry, and Das, Sambit (2022) Impact of Hydrogen Sulfide Scavenger Residuals on the Fluorescence Behaviour of OiW Discharges from Gas-Condensate Production. In: Proceedings of the SPE Asia Pacific Oil & Gas Conference and Exhibition. From: SPE Asia Pacific Oil & Gas Conference and Exhibition, 17-19 October 2022, Adelaide, SA, Australia.

Lammie, Corey, Xiang, Wei, Linares-Barranco, Bernabé, and Rahimi Azghadi, Mostafa (2022) MemTorch: an open-source simulation framework for memristive deep learning systems. Neurocomputing, 485. pp. 124-133.

Lammie, Corey, Xiang, Wei, and Rahimiazghadi, Mostafa (2022) Modeling and simulating in-memory memristive deep learning systems: an overview of current efforts. Array, 13. 100116.

Li, Qiang, Yang, Yuan, Ma, Haohao, Zhou, Yangle, You, Guolong, Zhang, Minmin, and Xiang, Wei (2022) A Novel Floating High-Voltage Level Shifter with Pre-Storage Technique. Sensors, 22 (5). 1774.

Li, Chenqi, Lammie, Corey, Dong, Xuening, Amirsoleimani, Amirali, Azghadi, Mostafa Rahimi, and Genov, Roman (2022) Seizure Detection and Prediction by Parallel Memristive Convolutional Neural Networks. IEEE Transactions on Biomedical Circuits and Systems, 16 (4). pp. 609-625.

Lal, Alvin, and Datta, Bithin (2021) Application of the group method of data handling and variable importance analysis for prediction and modelling of saltwater intrusion processes in coastal aquifers. Neural Computing and Applications, 33. pp. 4179-4190.

Lehtola, Timo A., and Zahedi, Ahmad (2021) Electric Vehicle Battery Cell Cycle Aging in Vehicle to Grid Operations: A Review. IEEE Journal of Emerging and Selected Topics in Power Electronics, 9 (1). 8936355. pp. 423-437.

Lammie, Corey, Rahimiazghadi, Mostafa, and Ielmini, Daniele (2021) Empirical metal-oxide RRAM device endurance and retention model for deep learning simulations. Semiconductor Science and Technology, 36 (6). 065003.

Lei, Qiyang, Liu, Xiaozhou, Xiao, Weidong, and Du, Yang (2021) A Low-cost and Stand-alone Ground Based Sensing Station for Efficient Solar Forecasting in PV Power Systems. In: Proceedngs of the 47th Annual Conference of the IEEE Industrial Electronics Society. From: IECON 2021: 47th Annual Conference of the IEEE Industrial Electronics Society, 13-16 October 2021, Toronto, Canada.

Lammie, Corey, Eshraghian, Jason K., Lu, Wei D., and Rahimi Azghadi, Mostafa (2021) Memristive stochastic computing for deep learning parameter optimization. IEEE Transactions on Circuits and Systems II: Express Briefs, 68 (5). pp. 1650-1654.

Lal, Alvin, and Datta, Bithin (2021) Optimal pumping strategies for the management of coastal groundwater resources: application of Gaussian Process Regression metamodel-based simulation-optimization methodology. ISH Journal of Hydraulic Engineering, 27 (sup1). pp. 136-145.

Lin, Wenxian, Armfield, S.W., and Khatamifar, Mehdi (2021) Scalings for unsteady natural convection boundary layer under time-varying heating flux in a small Prandtl number fluid. Case Studies in Thermal Engineering, 27. 101351.

Lammie, Corey, Xiang, Wei, and Rahimi Aghadi, Mostafa (2021) Towards memristive deep learning systems for real-time mobile epileptic seizure prediction. In: Proceedings of the IEEE International Symposium on Circuits and Systems. From: ISCAS 2021: IEEE International Symposium on Circuits and Systems, 22-28 May 2021, Daegu, Korea.

Liu, Haoran, Xiao, Yue, Yang, Ping, Fu, Jialiang, Li, Shaoqian, and Xiang, Wei (2021) Transmit antenna Sselection for full-duplex spatial modulation based on machine learning. IEEE Transactions on Vehicular Technology, 70 (10). pp. 10695-10708.

Laradji, Issam H., Saleh, Alzayat, Rodriguez, Pau, Nowrouzezahrai, Derek, Rahimi Azghadi, Mostafa, and Vazquez, David (2021) Weakly supervised underwater fish segmentation using affinity LCFCN. Scientific Reports, 11. p. 17379.

Li, Xingshuo, Wen, Huiqing, Hu, Yihua, Du, Yang, and Yang, Yong (2021) A comparative study on photovoltaic MPPT algorithms under EN50530 dynamic test procedure. IEEE Transactions on Power Electronics, 36 (4). pp. 4153-4168.

Lin, Dingyi, Li, Xingshuo, Ding, Shuye, Wen, Huiqing, Du, Yang, and Xiao, Weidong (2021) self-tuning MPPT scheme based on reinforcement learning and Beta parameter in photovoltaic power systems. IEEE Transactions on Power Electronics, 36 (12). pp. 13826-13838.

Liu, Xiaoliang, Li, Qian, Zhang, Yan, Jiang, Tao, Yang, Yongbin, Xu, Bin, and He, Yinghe (2020) Electrochemical behaviour of the dissolution and passivation of arsenopyrite in 9K culture medium. Applied Surface Science, 508. 145269.

Li, Qiong, Gao, Wenfeng, Lin, Wenxian, Liu, Tao, Zhang, Yonggang, Ding, Xiang, Huang, Xiaoqiao, and Liu, Wuming (2020) Experiment and simulation study on convective heat transfer of all-glass evacuated tube solar collector. Renewable Energy, 152. pp. 1129-1139.

Lammie, Corey, and Rahimi Azghadi, Mostafa (2020) Live demonstration: Low-Power and High-Speed Deep FPGA Inference Engines for weed classification at the edge. In: Proceedings of the 2020 IEEE International Symposium on Circuits and Systems. From: ISCAS: 2020 IEEE International Symposium on Circuits and Systems, 10-21 October 2020, Seville, Spain.

Lammie, Corey, and Rahimi Azghadi, Mostafa (2020) MemTorch: a simulation framework for deep memristive cross-bar architectures. In: Proceedings of the 2020 IEEE International Symposium on Circuits and Systems. From: ISCAS: 2020 IEEE International Symposium on Circuits and Systems, 10-21 October 2020, Seville, Spain.

Lal, Alvin, and Datta, Bithin (2020) Performance evaluation of homogeneous and heterogeneous ensemble models for groundwater salinity predictions: a regional-scale comparison study. Water, Air and Soil Pollution, 231. 320.

Lin, Wenxian, and Armfield, S.W. (2020) Prandtl number scalings for unsteady natural convection boundary-layer flow on an evenly heated vertical plate in a homogeneous Pr > 1 fluid. Numerical Heat Transfer, Part A: Applications, 77 (6). pp. 619-631.

Lin, Dingyi, Li, Xingshuo, Ding, Shuye, and Du, Yang (2020) Strategy comparison of power ramp rate control for photovoltaic systems. CPSS Transactions on Power Electronics and Applications, 5 (4). 20284541. pp. 329-341.

Liu, Xiaoliang, Jiang, Tao, Xu, Bin, Zhang, Yan, Li, Qian, Yang, Yongbin, and He, Yinghe (2020) Thiosulphate leaching of gold in the Cu-NH₃₋S₂O₃²⁻-H₂O system: an updated thermodynamic analysis using predominance area and species distribution diagrams. Minerals Engineering, 151. 106336.

Li, Huan Ying, Liu, Zi Jing, Yu, Qi Yue, Xiang, Wei, and Adachi, Fumiyuki (2020) Uplink SCMA with STBC in fading channels. In: Proceedings of the IEEE Vehicular Technology Conference. 9128386. From: VTC2020-Spring: IEEE 91st Vehicular Technology Conference, 25-28 May 2020, Antwerp, Belgium.

Lammie, Corey, Xiang, Wei, and Azghadi, Mostafa Rahimi (2019) Accelerating deterministic and stochastic binarized neural networks on FPGAS using OpenCL. In: Procedings of the International Midwest Symposium on Circuits and Systems. pp. 626-629. From: MWSCAS 2019: IEEE 62nd International Midwest Symposium on Circuits and Systems, 4-7 August 2019, Dallas, TX, USA.

Lal, Alvin, and Datta, Bithin (2019) Application of monitoring network design and feedback information for adaptive management of coastal groundwater resources. International Journal of Environmental Research and Public Health, 16 (22). 4365.

Lv, Zhihan, Ota, Kaoru, Lloret, Jaime, Xiang, Wei, and Bellavista, Paolo (2019) Complexity problems handled by big data technology. Complexity, 2019. 9090528.

Li, Chang Yang, Feng, Xiao Lei, Fan, Xiao Li, Yu, Xiao Tong, Yin, Zheng Zheng, Kannan, M. Bobby, Chen, Xiao Bo, Guan, Shao Kang, Zhang, Jun, and Zeng, Rong Chang (2019) Corrosion and wear resistance of micro-arc oxidation composite coatings on magnesium alloy AZ31 — the influence of inclusions of carbon spheres. Advanced Engineering Materials, 21 (9). 1900446.

Li, Chang-Yang, Fan, Xiao-Li, Zeng, Rong-Chang, Cui, Lan-Yue, Li, Shuo-Qi, Zhang, Fen, He, Qing-Kun, Kannan, M. Bobby, Jiang, Hong-Wei (George), Chen, Dong-Chu, and Guan, Shao-Kang (2019) Corrosion resistance of in-situ growth of nano-sized Mg(OH)₂ on micro-arc oxidized magnesium alloy AZ31—influence of EDTA. Journal of Materials Science and Technology, 35 (6). pp. 1088-1098.

Lammie, Corey, Hamilton, Tara Julia, van Schaik, André, and Rahimi Azghadi, Mostafa (2019) Efficient FPGA implementations of pair and triplet-based STDP for neuromorphic architectures. IEEE Transactions on Circuits and Systems I: Regular Papers, 66 (4). pp. 1558-1570.

Liu, Xiaoliang, Li, Qian, Zhang, Yan, Jiang, Tao, Yang, Yongbin, Xu, Bin, and He, Yinghe (2019) Improving gold recovery from a refractory ore via Na₂SO₄ assisted roasting and alkaline Na₂S leaching. Hydrometallurgy, 185. pp. 133-141.

Lei, Lei, Xu, Huijuan, Xiong, Xiong, Zheng, Kan, and Xiang, Wei (2019) Joint computation offloading and multi-user scheduling using approximate dynamic programming in NB-IoT edge computing system. IEEE Internet of Things Journal, 6 (3). pp. 5345-5362.

Lammie, Corey, Olsen, Alex, Carrick, Tony, and Rahimi Azghadi, Mostafa (2019) Low-power and high-speed deep FPGA inference engines for weed classification at the edge. IEEE Access, 7. pp. 51171-51184.

Lal, Alvin, and Datta, Bithin (2019) Multi-objective groundwater management strategy under uncertainties for sustainable control of saltwater intrusion: solution for an island country in the South Pacific. Journal of Environmental Management, 234. pp. 115-130.

Lei, Lei, Xu, Huijuan, Xiong, Xiong, Zheng, Kan, Xiang, Wei, and Wang, Xianbin (2019) Multiuser resource control with deep reinforcement learning in IoT edge computing. IEEE Internet of Things Journal, 6 (6). pp. 10119-10133.

Lin, Wenxian, and Armfield, Steven W. (2019) Natural convection boundary-layer flow on an evenly heated vertical plate with time-varying heating flux in a stratified Pr < 1 fluid. Numerical Heat Transfer, Part A: Applications, 76 (6). pp. 393-419.

Lal, Alvin, and Datta, Bithin (2019) Optimal groundwater-use strategy for saltwater intrusion management in a Pacific Island country. Journal of Water Resources Planning and Management, 145 (9). 04019032.

Lei, Lei, Qi, Jiaju, and Zheng, Kan (2019) Patent analytics based on feature Vector Space Model: a case of IoT. IEEE Access, 7. pp. 45705-45715.

Lehtola, Timo, and Zahedi, Ahmad (2019) Solar energy and wind power supply supported by storage technology: a review. Sustainable Energy Technologies and Assessments, 35. pp. 25-31.

Lammie, Corey, and Azghadi, Mostafa Rahimi (2019) Stochastic computing for low-power and high-speed deep learning on FPGA. In: Proceedings of the IEEE International Symposium on Circuits and Systems. From: ISCAS 2019: IEEE International Symposium on Circuits and Systems, 26-29 May 2019, Sapporo, Japan.

Lang, Yue, Wang, Qing, Yang, Yang, Hou, Chunping, Huang, Danyang, and Xiang, Wei (2019) Unsupervised domain adaptation for micro-doppler human motion classification via feature fusion. IEEE Geoscience and Remote Sensing Letters, 16 (3). pp. 392-396.

Lammie, Corey, Krestinskaya, Olga, James, Alex, and Rahimi Azghadi, Mostafa (2019) Variation-aware binarized memristive networks. In: Proceedings of the 26th IEEE International Conference on Electronics, Circuits and Systems. pp. 490-493. From: 2019 ICECS: 26th IEEE International Conference on Electronics, Circuits and Systems, 27-29 November 2019, Genoa, Italy.

Lammie, Corey, Hamilton, Tara, and Azghadi, Mostafa Rahimi (2018) Unsupervised character recognition with a simplified FPGA neuromorphic system. In: Proceedings of the IEEE International Symposium on Circuits and Systems. From: 2018 IEEE International Symposium on Circuits and Systems (ISCAS), 27-30 May 2018, Florence, Italy.

Li, Ling-Yu, Cui, Lan-Yue, Zeng, Rong-Chang, Li, Shuo-Qi, Chen, Xiao-Bo, Zheng, Yufeng, and Kannan, M. Bobby (2018) Advances in functionalized polymer coatings on biodegradable magnesium alloys – a review. Acta Biomaterialia, 79. pp. 23-36.

Lei, Lei, Xiong, Xiong, Hou, Lu, and Zheng, Kan (2018) Collaborative edge caching through service function chaining: architecture and challenges. IEEE Wireless Communications Magazine, 25 (3). pp. 94-102.

Lal, Alvin, and Datta, Bithin (2018) Development and implementation of support vector machine regression surrogate models for predicting groundwater pumping-induced saltwater intrusion into coastal aquifers. Water Resources Management, 32 (7). pp. 2405-2419.

Lal, Alvin, and Datta, Bithin (2018) Genetic programming and Gaussian Process Regression models for groundwater salinity prediction: machine learning for sustainable water resources management. In: Proceedings of the IEEE Conference on Technologies for Sustainability. From: SusTech 2018: IEEE Conference on Technologies for Sustainability, 11-13 November 2018, Long Beach, CA, USA.

Lammie, Corey, Hamilton, Tara, and Azghadi, Mostafa Rahimi (2018) Live demonstration: Unsupervised character recognition with a FPGA neuromorphic system. In: Proceedings of the IEEE International Symposium on Circuits and Systems. From: ISCAS 2018: IEEE International Symposium on Circuits and Systems, 27-30 May 2018, Florence, Italy.

Long, Hang, Xiang, Wei, and Sun, Yao (2018) Low-latency and high-reliability performance analysis of relay systems. IET Communications, 12 (5). pp. 627-633.

Lal, Alvin, and Datta, Bithin (2018) Multiple objective management strategies for coastal aqifers utilizing new surrogate models. International Journal of Geomate, 15 (48). pp. 79-85.

Li, You, Lei, Xia, Tang, Wanbin, He, Dongxiao, Xiao, Yue, and Xiang, Wei (2018) Performance analysis of MMSE pre-coding aided spatial modulation. IEEE Access, 6. pp. 44835-44845.

Li, You, Lei, Xia, Xiao, Yue, Yang, Ping, Zheng, Chen, and Xiang, Wei (2018) Power allocation for pre-coding-aided spatial modulation. IEEE Communications Letters, 22 (5). pp. 1094-1097.

Li, Fei, Zheng, Kan, Zhao, Hui, and Xiang, Wei (2018) QAM signal transmission based on matrix model in filter-bank multicarrier systems. IEEE Access, 6. pp. 63987-63998.

Liu, Xiaoliang, Xu, Bin, Yang, Yongbin, Li, Qian, Jiang, Tao, and He, Yinghe (2018) Thermodynamic analysis of ammoniacal thiosulphate leaching of gold catalysed by Co(III)/Co(II) using E-h-pH and speciation diagrams. Hydrometallurgy, 178. pp. 240-249.

Lammie, Corey, and Rahimiazghadi, Mostafa (2017) Digital, analog, and memristive implementation of Spike-based Synaptic Plasticity. In: Abstracts from the Systems & Computational Neuroscience Down Under Meeting. p. 46. From: SCiNDU: Systems & Computational Neuroscience Down Under, 13-15 December 2017, Brisbane, QLD, Australia.

Lovisa, Julia, and Sivakugan, Nagaratnam (2017) Closure to "Tall oedometer testing: method to account for wall friction" by Julie Lovisa and Nagaratnam Sivakugan. International Journal of Geomechanics, 17 (2).

Liu, Xiaoliang, xu, bin, min, xin, Li, Qian, Yang, Yongbin, Jiang, Tao, He, Yinghe, and Zhang, Xi (2017) Effect of pyrite on thiosulfate leaching of gold and the role of ammonium alcohol polyvinyl phosphate (AAPP). Metals, 7. 278.

Lal, Alvin, and Datta, Bithin (2017) Modelling saltwater intrusion processes and development of a multi-objective strategy for management of coastal aquifers utilizing planned artificial freshwater recharge. Modeling Earth Systems and Environment, 4 (1). pp. 111-126.

Long, Hang, Xiang, Wei, and Li, Yuli (2017) Precoding and cooperative jamming in multi-antenna two-way relaying wiretap systems without eavesdroppers' channel state information. IEEE Transactions on Information Forensics and Security, 12 (6). pp. 1309-1318.

Lou, Yi, Ma, Yong-Kui, Yu, Qi-Yue, Zhao, Hong-Lin, and Xiang, Wei (2016) A differential ML combiner for differential amplify-and-forward system in time-selective fading channels. IEEE Transactions on Vehicular Technology, 65 (12). pp. 10157-10163.

Lehtola, Timo, and Zahedi, Ahmad (2016) Automatic charging scheme for electric vehicle to grid using vehicle built-in monitoring device. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-4. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Lehtola, Timo Antero, and Zahedi, Ahmad (2016) Electric vehicle to grid for power regulation: a review. In: Proceedings of the IEEE International Conference on Power System Technology. pp. 1-6. From: POWERCON 2016: IEEE International Conference on Power System Technology, 28 September - 1 October 2016, Wollongong, NSW, Australia.

Lin, Wenxian, and Armfield, S.W. (2016) Scalings for unsteady natural convection boundary layers on a vertical plate at time-dependent temperature. International Journal of Thermal Sciences, 111. pp. 78-99.

Lehtola, Timo, and Zahedi, Ahmad (2016) Sustainable energy supply using renewable sources supported by storage technology. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference. pp. 71-74. From: ISGT-Asia 2016: IEEE Innovative Smart Grid Technologies Conference, 28 November - 1 December 2016, Melbourne, VIC, Australia.

Li, Jun, Sun, Jinshan, Qian, Yuwen, Shu, Feng, Xiao, Ming, and Xiang, Wei (2016) A commercial video-caching system for small-cell cellular networks using game theory. IEEE Access, 4. pp. 7519-7531.

Li, Jie, Tang, Xiaohu, and Xiang, Wei (2016) A new construction of (k+2, k) minimal storage regenerating code over F-3 with optimal access property for all nodes. IEEE Communications Letters, 20 (7). pp. 1289-1292.

Lehtola, Timo, and Zahedi, Ahmad (2015) Vehicle to grid system in frequency regulation for securing electricity network stability. In: Proceedings from the Asia-Pacific Power and Energy Engineering Conference. pp. 1-4. From: APPEEC 2015: Asia-Pacific Power and Energy Engineering Conference, 15-18 November 2015, Brisbane, QLD, Australia.

Lehtola, Timo, and Zahedi, Ahmad (2015) Cost of EV battery wear due to vehicle to grid application. In: Proceedings of the Australasian Universities Power Engineering Conference. 66. pp. 1-4. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Lovisa, Julie, and Sivakugan, Nagaratnam (2015) Tall oedometer testing: method to account for wall friction. International Journal of Geomechanics, 15 (2). 04014045. pp. 1-9.

Lovisa, Julie, and Sivakugan, Nagaratnam (2015) A simple method to account for non-uniform initial excess pore water pressures in settlement computations. International Journal of Geotechnical Engineering, 9 (1). pp. 89-100.

Leng, Tianjiu, Lin, Wenxian, and Liu, Tao (2014) Computational simulation of object falling into water based on breach parabolic movement. Applied Mechanics and Materials, 556-562. pp. 3468-3474.

Lovisa, J., Sivakugan, N., MacDonald, S., Thomas, S., and Read, W.W. (2014) Modifying the Casagrande curve-fitting method to account for 3D axisymmetric consolidation. In: Oka, Fusao, Murakami, Akira, Uzuoka, Ryosuke, and Kimoto, Sayuri, (eds.) Computer Methods and Recent Advances in Geomechanics. Computer Methods and Recent Advances in Geomechanics . CRC Press, London, UK, pp. 523-528.

Lin, Wenxian, Liu, Tao, Gao, Wenfeng, and Armfield, Steven W. (2014) Three-dimensional direct numerical simulation of unsteady transitional round fountains in a homogeneous fluid. Applied Mechanics and Materials, 553. pp. 150-155.

Li, Ren-fei, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2014) The influence of daily radiation collected on the daily heat gain of an evacuated tube solar water heater. Journal of Yunnan Normal University, 34 (1). pp. 31-35.

Lin, Wenxian, and Armfield, S.W. (2013) Direct numerical simulation of unsteady natural convection boundary layers on an evenly heated plate with time-varying heating flux. In: Proceedings of the 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics. 1292. pp. 1-8. From: APCOM and ISCM 2013: 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, 11-14 December 2013, Singapore.

Lin, Wenxian, and Armfield, S.W. (2013) Scalings for unsteady natural convection boundary layers on an evenly heated plate with time-dependent heating flux. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), E88 (6). 063013. pp. 1-17.

Lovisa, Amy C., Wang, Vincent Z., Henderson, David J., and Ginger, John D. (2013) Development and validation of a numerical model for steel roof cladding subject to static uplift loads. Wind & Structures, 17 (5). pp. 495-513.

Lovisa, Julie, and Sivakugan, Nagaratnam (2013) A method to determine c(v)under sinusoidal pore pressure distributions. Geotechnical Testing Journal, 36 (6). GTJ20120233. pp. 1-12.

Leonardi, Christopher R., Jones, Bruce D., Holmes, David W., and Williams, John R. (2013) Numerical rheometry of non-Newtonian particle suspensions using coupled lattice Boltzmann-discrete element methods. In: Proceedings of the Third International Conference on Particle-Based Methods: fundamentals and applications. From: Particles 2013: Third International Conference on Particle-Based Methods: fundamentals and applications, 18-20 September 2013, Stuttgart, Germany.

Lu, Jun, Zahedi, Ahmad, Yang, Chengshi, Wang, Mingzhou, and Peng, Bo (2013) Building the hydrogen economy in China: drivers, resources and technologies. Renewable and Sustainable Energy Reviews, 23. pp. 543-556.

Laki, Bradley Dean, and Kikkert, Cornelius Jan (2013) Adaptive digital predistortion for wideband high crest factor applications based on the WACP optimization objective: an extended analysis. IEEE Transactions on Broadcasting, 59 (1). pp. 136-145.

Lovisa, Julie, and Sivakugan, Siva (2013) An in-depth comparison of cv values determined using common curve-fitting techniques. Geotechnical Testing Journal, 36 (1). pp. 1-10.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2013) Time factor in consolidation: critical review. International Journal of Geomechanics, 13 (1). pp. 83-86.

Leonardi, Christopher R., Jones, Bruce D., Holmes, David W., and Williams, John R. (2013) Simulation of complex particle suspensions using coupled lattice boltzmann-discrete element methods. In: Proceedings of the 6th International Conference on Discrete Element Methods. From: DEM6: 6th Internatioal Conference on Discrete Element Methods , 5 - 6 August 2013, Golden, CO, USA.

Lin, Wenxian, and Armfield, S.W. (2012) Unified Prandtl number scaling for start-up and fully developed natural-convection boundary layers for both Pr ≳1 and Pr ≳1 fluids with isothermal heating. Physical Review E, 86 (6). 066312. pp. 1-10.

Laki, Bradley Dean, and Kikkert, Cornelis Jan (2012) Adaptive digital predistortion for wideband high crest factor applications based on the WACP optimization objective: a conceptual overview. IEEE Transactions on Broadcasting, 58 (4). pp. 609-618.

Lu, Jun, and Zahedi, Ahmad (2012) Constrained model predictive control of proton exchange membrane fuel cell based on a combined empirical and mechanistic model. Journal of Renewable and Sustainable Energy, 4 (5). 053116. pp. 1-15.

Lovisa, J., Sivakugan, N., and Ameratunga, J. (2012) Discretisation of constant rate loading. In: ANZ 2012 Conference Proceedings. pp. 864-870. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, VIC, Australia.

Li, HongYan, Zhang, GuangXin, and Sun, GuangZhi (2012) Simulation and evaluation of the water purification function of Zhalong Wetland based on a combined water quantity-quality model. Science China Technological Sciences, 55 (7). pp. 1973-1981.

Lovisa, A.C., Wang, V.Z., Henderson, D.J., and Ginger, J.D. (2012) A finite element model for pierced-fixed, corrugated metal roof cladding subject to uplift wind loads. In: Australasian Structural Engineering Conference-Proceedings. 37. pp. 1-8. From: Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.

Lovisa, J., Read, W.W., and Sivakugan, N. (2012) Calculating cv based on non-uniform initial excess pore pressure. Géotechnique, 62 (8). pp. 741-748.

Lizama Allende, K., Fletcher, T.D., and Sun, G. (2012) The effect of substrate media on the removal of arsenic, boron and iron from an acidic wastewater in planted column reactors. Chemical Engineering Journal, 179. pp. 119-130.

Lu, Jun, and Zahedi, Ahmad (2012) Air supply control for maximum efficiency point tracking in fuel cell systems. Journal of Renewable and Sustainable Energy, 4 (3). 033106. pp. 1-14.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2012) Consolidation behavior of soils subjected to asymmetric initial excess pore pressure distributions with one-way drainage. International Journal of Geomechanics, 12 (3). pp. 318-322.

Lu, Jun, and Zahedi, Ahmad (2012) Model predictive control for PEMFC based on least square support vector machine. In: Asia Pacific Power and Energy Engineering Conference (APPEEC), 2012. pp. 1-4. From: Power and Energy Engineering Conference (APPEEC), 2012, 27-29 March 2012., Shanghai, China.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, and Armfield, Steven W. (2012) Onset asymmetry and three-dimensionality in transitional round fountains in homogeneous fluid. In: Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. FM05-003. pp. 1-2. From: ICTAM 2012: 23rd International Congress of Theoretical and Applied Mechanics, 19-24 August 2012, Beijing, China.

Lu, Jun, and Zahedi, Ahmad (2012) Predictive control of PEMFC based on a combined empirical and mechanistic model. In: Proceedings of the 2012 International Conference on Power System Technology. pp. 1-6. From: POWERCON 2012, 30 October - 2 November 2012, Auckland, New Zealand.

Lu, Jun, and Zahedi, Ahmad (2012) Support vector machine based predictive controller with swarm intelligence for PEMFC. In: Proceedings of the 22nd Australasian Universities Power Engineering Conference. pp. 1-6. From: Australasian Universities Power Engineering Conference 2012, 26-29 September 2012, Bali, Indonesia.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Peng, Zhongxiao, and Li, Li (2011) Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method. Mechanical Systems and Signal Processing, 25 (7). pp. 2589-2607.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2011) A critical reappraisal of the average degree of consolidation. Geotechnical and Geological Engineering, 29 (5). pp. 873-879.

Liu, Xueping, Gao, Wenfeng, Xu, Ling, Lin, Wenxian, Ding, Xiang, Dai, Wei, and Liu, Tao (2011) Comparative study on the two testing methods to obtain the heat gain for flat-plate solar water heaters with vertical storage tanks. Journal of Yunnan Normal University, 31 (4). pp. 36-40.

Lovisa, J., Read, W.W, and Sivakugan, N. (2011) Degree of consolidation - peaked initial excess pore water pressure distributions. In: Computational Methods for Geomechanics: Frontiers and New Applications. pp. 100-105. From: IACMAG 2011 13th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 9-11 May 2011, Melbourne, VIC, Australia.

Lei, Chengwang, Peng, Zhongxiao, Day, Thomas, Yan, Xinping, Bai, Xiuqin, and Yuan, Chengqing (2011) Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers. International Communications in Heat and Mass Transfer, 38 (1). pp. 25-30.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2011) Fault detection and diagnosis of a gearbox in marine propulsion systems using bispectrum analysis and artificial neural networks. Journal of Marine Science and Application, 10 (1). pp. 17-24.

Lovisa, J., Arulrajah, A., Ameratunga, J., Boyle, P., Sivakugan, N., and Read, W.W. (2011) Land reclamation: a review of initial consolidation conditions. In: Proceedings of the 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (2) pp. 1629-1634. From: 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, 23-27 May 2011, Hong Kong, China.

Leonardi, Christopher R., Holmes, David W., Williams, John R., and Tilke, Peter G. (2011) A multi-core numerical framework for characterizing flow in oil reservoirs. In: Proceedings of the 2011 Spring Simulation Multiconference (6) pp. 166-174. From: SpringSim '11 Spring Simulation Multiconference, 3 - 7 April 2011, Boston, MA, USA.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A fault diagnosis approach for gears using multidimensional features and intelligent classifier. Noise and Vibration Worldwide, 41 (10). pp. 76-86.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A new method of nonlinear feature extraction for multi-fault diagnosis of rotor systems. Noise and Vibration Worldwide, 41 (10). pp. 29-37.

Lovisa, Julie, Read, Wayne, and Sivakugan, Nagaratnam (2010) Consolidation behaviour of soils subjected to asymmetric initial excess pore pressure distributions. International Journal of Geomechanics, 10 (5). pp. 181-189.

Lyons, Emma, and Wang, Vincent Z. (2010) Effect of material degradation models on the safety performance of reinforced concrete members subject to extreme loading. In: Proceedings of the 35th Conference on Our World in Concrete & Structures. pp. 17-24. From: 35th Conference on Our World in Concrete & Structures, 25-27 August 2010, Singapore.

Lee, A., and Sheehan, M.E. (2010) Development of a geometric flight unloading model for flighted rotary dryers. Powder Technology, 198 (3). pp. 395-403.

Lovisa, Julie, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2010) Behaviour of prestressed geotextile-reinforced sand bed supporting a loaded circular footing. Geotextiles and Geomembranes, 28 (1). pp. 23-32.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqin, and Peng, Zhongxiao (2010) Gear faults diagnosis based on wavelet-AR model and PCA. In: Proceedings of SPIE (7820) 78203V. 78203V-1. From: International Conference on Image Processing and Pattern Recognition in Industrial Engineering, 7 - 8 August 2010, Xi'an, China.

Lu, Jun, and Zahedi, Ahmad (2010) Maximum efficiency point tracking control for fuel cell power systems. In: Proceedings of POWERCON 2010 International Conference on Power System Technology . pp. 1-6. From: POWERCON 2010 International Conference on Power System Technology, 24-28 October 2010, Hangzhou, China.

Lu, Tao, Yao, Xiangdong, Lu, Max Gao Qing, and He, Yinghe (2010) Roles of trifluoroacetic acid, acetic acid and their salts in the synthesis of helical mesoporous materials. Journal of Porous Materials, 17 (1). pp. 123-131.

Lovisa, Julie, Shukla, Sanjay, and Sivakugan, Siva (2010) Shear strength of randomly distributed moist fibre-reinforced sand. Geosynthetic International, 17 (2). pp. 100-106.

Lymer, Richard, Yin, Ling, Peng, Zhongxiao, Jones, Robert H.B., and Sandham, Andrew (2010) Surface roughness and stress responses of a feldspar porcelain to fatigue impact. Key Engineering Materials, 443. pp. 557-561.

Li, Li, Peng, Zhongxiao, and Peng, Shuzhi (2009) Detrended fluctuation analysis for gear fault diagnosis. China Mechanical Engineering, 20 (19). pp. 2311-2314.

Lu, Tao, Yao, Xiangdong, Lu, Gao Qing, and He, Yinghe (2009) Controlled evolution from multilamellar vesicles to hexagonal mesostructures through the addition of 1,3,5-trimethylbenzene. Journal of Colloid and Interface Science, 336 (1). pp. 368-373.

Lin, Wenxian, Armfield, S.W., Patterson, J.C., and Lei, Chengwang (2009) Prandtl number scaling of unsteady natural convection boundary layers for Pr>1 fluids under isothermal heating. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 79 (6). 066313.

Li, Li, Peng, Zhongxiao, and Zhao, Meiyun (2009) In-situ monitoring of active crack in steel structure using acoustic emission technique. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation (1) pp. 229-232. From: 2009 International Conference on Measuring Technology and Mechatronics Automation, 11-12 April 2009, Hunan, China.

Leong, Y.K. , Sganzerla, M., Berndt, C.C. , and Campbell, G.R. (2008) Metal ions solubility in plant phosphoric acid: degree of ammonia neutralization and temperature effects. Industrial & Engineering Chemistry Research, 47 (5). pp. 1380-1385.

Lin, Wenxian, and Armfield, S.W. (2008) Onset of entrainment in transitional round fountains. International Journal of Heat and Mass Transfer, 51. pp. 5226-5237.

Lin, Wenxian, Armfield, S.W., and Patterson, J.C. (2008) Unsteady natural convection boundary-layer flow of a linearly-stratified fluid with Pr < 1 on an evenly heated semi-infinite vertical plate. International Journal of Heat and Mass Transfer, 51. pp. 327-343.

Lin, Wenxian, Armfield, S.W., and Patterson, J.C. (2007) Direct simulation of transitional plane fountains in a homogeneous fluid. ANZIAM Journal, 48. pp. 692-708.

Lei, Chengwang, and Patterson, John C. (2007) A numerical simulation of natural convection in an isosceles triangular enclosure heated from below. ANZIAM Journal, 48. pp. 630-644.

Louden, D., Inderbitzin, Stefanie, Peng, Z., and de Nys, R. (2007) Development of a new protocol for testing bath sponge quality. Aquaculture, 271 (1-4). pp. 275-285.

Leong, YeeKwong (2007) Surface forces arising from adsorbed hydrolysis products of metal ions in ZrO2 and silica dispersions: Cu(II), Ni(II), Co(II) and Al(III). Powder Technology, 179 (1-2). pp. 38-42.

Lei, Chengwang, and Patterson, John C. (2007) Flow response to periodic forcing in a reservoir with water depth beyond the penetration depth of the solar radiation. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA, Australia.

Luick, John L., Mason, Luciano, Hardy, Thomas, and Furnas, Miles J. (2007) Circulation in the Great Barrier Reef Lagoon using numerical tracers and in situ data. Continental Shelf Research, 27 (6). pp. 757-778.

Lin, Wenxian, Armfield, S.W., and Patterson, John C. (2007) Cooling of a Pr<1 fluid in a rectangular container. Journal of Fluid Mechanics, 574. pp. 85-108.

Liow, Jong-Leng, Frazer, Adrian, He, Yinghe, Eastwood, Kellie, and Phan, Cu (2007) Acid mist formation in the electrowinning of copper. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007. pp. 1373-1380. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007. pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Lei, C., Armfield, S.W., Patterson, J.C., and O'Neill, A. (2007) Effects of corner geometry and adiabatic extensions on heat transfer through a differentially heated square cavity. In: 16th Australasian Fluid Mechanics Conference. pp. 125-128. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Lei, C., and Patterson, J.C. (2007) Flow response to periodic thermal forcing in a reservoir with water depth beyond the penetration depth of solar radiation. Australian Journal of Mechanical Engineering, 4 (1). pp. 29-37.

Loughran, J.L., and Britton, P.F. (2007) Modelling of coal flow through industrial scale transfer chutes. In: Proceedings of the Discrete Element Methods Conference 2007 (21) From: Discrete Element Methods (DEM) 2007, 27-29 August 2007, Brisbane, QLD, Australia.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, and Xia, Chaofeng (2007) A comparative study of the thermal performances of cross-corrugated and V-groove solar air collectors. International Journal of Green Energy, 4 (4). pp. 427-451.

Liu, Tao, Lin, Wenxian, Gao, Wenfeng, Luo, Chuanxu, Li, Ming, Zheng, Qinhong, and Xia, Chaofeng (2007) A parametric study on the thermal performance of a solar air collector with a v-groove absorber. International Journal of Green Energy, 4. pp. 601-622.

Liovic, Peter, Rudman, Murray, Liow, Jong-Leng, Lakehal, Djamel, and Kothe, Doug (2006) A 3D unsplit-advection volume tracking algorithm with planarity-preserving interface reconstruction. Computers & Fluids, 35 (10). pp. 1011-1032.

Li, Qing, Loughran, Jeffery, Peng, Zhongxiao, and Osborne, John (2006) A fracture based model for wear debris formation. Key Engineering Materials, 324 (2006). pp. 1157-1160.

Li, Qing, Ichim, Ionut, Loughran, Jeff, Li, Wei, Swain, Michael, and Kieser, Jules (2006) Numerical simulation of crack formation in all ceramic dental bridge. Key Engineering Materials, 312. pp. 293-298.

Liu, Yi, Jin, Feng, and Li, Qing (2006) A strength-based multiple cutout optimization in composite plates using fixed grid finite element method. Composite Structures, 73 (4). pp. 403-412.

Lin, W., and Armfield, S.W. (2006) Direct simulation of transitional axisymmetric fountains in a homogeneous environment. In: Proceedings of the 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference, 13-18 August 2006, Sydney, NSW, Australia.

Lee, Andrew, Britton, Paul, and Sheehan, Madoc (2006) Experimental measurement of the drag coefficient for a falling raw sugar particle. International Sugar Journal, 108 (1296). pp. 678-682.

Lei, Chengwang, and Patterson, John C. (2006) Natural convection induced by diurnal heating and cooling in a reservoir with slowly varying topography. JSME International Journal - Series B: Fluids and Thermal Engineering, 49 (3). pp. 605-615.

Lubansky, A.S., Yeow, Y. Leong, Leong, Yee-Kwong, Wickramasinghe, S. Ranil, and Han, Binbing (2006) A general method of computing the derivative of experimental data. AIChE Journal, 52 (1). pp. 323-332.

Lin, Wenxian, Gao, Wenfeng, and Liu, Tao (2006) A parametric study on the thermal performance of cross-corrugated solar air collectors. Applied Thermal Engineering, 26 (10). pp. 1043-1053.

Leong, Yee-Kwong (2005) Yield stress and zeta potential of nanoparticulate silica dispersions under the influence of adsorbed hydrolysis products of metal ions - Cu(II), A1(III) and Th(IV). Journal of Colloid and Interface Science, 292 (2). pp. 558-566.

Loughran, J.G., and Kannapiran, Arasu (2005) Three-dimensional simulation of the rolling of a saturated fibro-porous media. Finite Elements in Analysis and Design, 42 (1). pp. 90-104.

Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.

Li, Wei, Swain, Michael V., Li, Qing, and Steven, Grant P. (2005) Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: applied biomaterials, 74B (1). pp. 520-528.

Loughran, J.G., and Leonardi, C. (2005) Application of discrete element methods to modelling of belt feeders. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 119-124. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists. pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.

Lin, Wenxian, and Armfield, SW (2005) Long-term behaviour of cooling fluid in a vertical cylinder. International Journal of Heat and Mass Transfer, 48. pp. 53-66.

Liow, J.V., and Cole, D.E. (2005) Modelling the mixing in an elliptic top submerged gas injected vessel. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Lin, Wenxian, and Armfield, SW (2005) Scaling laws for unsteady natural convection cooling of fluid with Prandtl number less than one in a vertical cylinder. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 72 (1). 016306.

Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.

Lei, C., Xu, F., and Patterson, J.C. (2005) Visualisation of natural convection in an isosceles triangular enclosure heated from below. In: Proceedings of the 5th Pacific Symposium on Flow Visualisation and Image Processing. pp. 1-8. From: 5th Pacific Symposium on Flow Visualisation and Image Processing, 27 - 29 September 2005, Daydream Island, QLD, Australia.

Lee, A., Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A comparison of compartment models for solids transport in flighted rotary dryers. In: Proceedings of the 33rd Australasian Chemical Engineering Conference. pp. 1-6. From: 33rd Australasian Chemical Engineering Conference, 25 - 28 September 2005, Sydney, NSW, Australia.

Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part I: experimental investigation. Biomaterials, 25 (20). pp. 4987-4993.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part II: numerical investigation. Biomaterials, 25 (20). pp. 4995-5001.

Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.

Leong, Yee-Kwong, and Ong, Ban-Choon (2004) Characterising the flocculated-dispersed state transition. Journal of Chemical Engineering of Japan, 37 (2). pp. 187-193.

Loughran, J.G., Leonardi, C.R., and Anderson, S. (2004) DEM of bulk flow through complex transitions. In: Proceedings of the 8th International Conference on Bulk Materials Storge, Handling and Transportation. pp. 1-5. From: 8th International Conference on Bulk Materials Storage, Handling and Transportation, 5-8 July 2004, University of Wollongong.

Liow, J.V., and Cole, D.E. (2004) Drop formation in T-junction microchannels. In: Proceedings of 32nd Australasian Chemical Engineering Conference. From: 32nd Australasian Chemical Engineering Conference, 26-29 September 2004, Sydney, NSW, Australia.

Lei, Chengwang, Patterson, John C., and Sha, Yong (2004) Flow response to periodic heating and cooling in a reservoir. In: Proceedings of the 15th Australasian Fluid Mechanics Conference. From: 15th Australasian Fluid Mechanics Conference, 13 - 17 December 2004, Sydney, NSW, Australia.

Loughran, J.G., and Anderson, S. (2004) Large strain deformation and fracture of quai-brittle materials with application to process comminution equipment. In: Proceedings of the 6th World Congress on Computational Mechanics. pp. 1-9. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Ledenyov, Dimitri, Mazierska, Janina, Allen, Greg, and Jacob, Mohan (2004) Lumped element modeling of nonlinear properties of high temperature superconductors in a dielectric resonator. In: Proceedings of the 15th International Conference on Microwaves, Radar and Wireless Communications 2004 (3) pp. 824-827. From: 15th International Conference on Microwaves, Radar and Wireless Communications 2004, 17-19 May 2004, Warszava, Poland.

Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Lee, A., Sheehan, M.E., and Schneider, P.A. (2004) Solids transport in rotary sugar dryers. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th. pp. 1-8. From: 26th Annual Conference Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Leong, Y.K., and Ong, B.C. (2003) Critical zeta potential and the Hamaker Constant of oxides in water. Powder Technology, 134 (3). pp. 249-254.

Leong, Y.K., and Yeow, Y.L. (2003) Obtaining the shear stress shear rate relationship and yield stress of liquid foods from Couette viscometry data. Rheologica Acta, 42 (4). pp. 365-371.

Lei, Chengwang, and Patterson, John C. (2003) A direct stability analysis of a radiation-induced natural convection boundary layer in a shallow wedge. Journal of Fluid Mechanics, 480. pp. 161-184.

Leong, Y.K., Ong, B.C., Tan, J.H., Chandramalar, A.V.M., and Lim, Y.Y. (2003) Surface forces arising from adsorbed ionic copolymers with hydrophobic and hydrophilic segments in colloidal dispersions. Journal of Rheology, 47 (1). pp. 59-69.

Liow, Jong-Leng, Juusela, Mikko, Gray, N.B., and Sutalo, I.D. (2003) Entrainment of a two-layer liquid through a taphole. Metallurgical and Materials Transactions B, 34 (6). pp. 821-832.

Loughran, J.G., Anderson, S., and Owen, D.R.J. (2003) Explicit predictive technology for modelling of the evolution of damage in ore passes. In: Proceedings of the 1st Australasian Ground Control in Mining Conference. pp. 95-102. From: Ground Control in Mining: Technology and Practice, 10-13 November 2003, Sydney, NSW, Australia.

Lei, Chengwang, Patterson, John C., and Farrow, Duncan E. (2003) Thermal layer instability in a shallow wedge subject to solar radiation. In: Proceedings of the Second International Conference on Computational Fluid Dynamics. From: Second International Conference on Computational Fluid Dynamics, 15-19 July 2002, Sydney, NSW, Australia.

Lei, Chengwang, and Patterson, John C (2002) Unsteady natural convection in a triangular enclosure induced by absorption of radiation. Journal of Fluid Mechanics, 460. pp. 181-209.

Lima, R. S., Kucuk, A., and Berndt, C. C. (2002) Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 327 (2). pp. 117-256.

Liovic, Peter, Rudman, Murray, and Liow, Jong-Leng (2002) Numerical modelling of free surface flows in metallurgical vessels. Applied Mathematical Modelling, 26 (2). pp. 113-140.

Leong, K., Mazierska, J., Jacob, M.V., Ledenyov, D., and Batt, S. (2002) Comparing unloaded Q-factor of a high-Q dielectric resonator measured using the transmission mode and reflection mode methods involving S-parameters circle fitting. In: Microwave Symposium Digest 2002 (3) pp. 1665-1668. From: IEEE MTT-S International Microwave Symposium, 2-7 June 2002, Seattle, WA, USA.

Leong, Y.K., and Ong, B.C. (2002) Critical zeta potential parameter for the characterization of the flocculated-dispersed state transition in colloidal dispersions. In: Proceedings of the 9th Asia Pacific Confederation of Chemical Engineering (APCChE) Congress and CHEMECA 2002. From: Green Processing and Sustainability: creating opportunities for the chemical and processing industries in the Asian Pacific region, 29 September to 3 October 2002, Christchurch, New Zealand.

Loughran, J.G., and Anderson, S.I. (2002) DEM - A virtual laboratory for studying complex particulate flow problems. In: Proceedings of the 3rd Australasian Congress on Applied Mechanics. From: Australasian Congress on Applied Mechanics, 20-22 February 2002, Sydney, Australia.

Loughran, J.G., and Kannapiran, A. (2002) Finite element modelling of the crushing of prepared cane and bagasse. In: Proceedings of the 24th Conference of the Australian Society of Sugar Cane Technologists (24) From: 2002 Conference of the Australian Society of Sugar Cane Technologists, 29 April - 2 May 2002, Cairns, QLD, Australia.

Leong, Y.K., Maguire, K.A., and Ridd, M. (2002) Identification of component for minimisation to achieve low molasses viscosity. In: Proceedings of the 2002 Conference of the Australian Society of Sugar Cane Technologists (24) pp. 418-423. From: Australian Society of Sugar Cane Technologists 24th Conference , 29 April - 2 May 2002, Cairns, QLD, Australia.

Leong, Y.K. (2002) Molecular configuration of adsorbed cis- and trans-1, 2-ethylene dicarboxylic acids and interparticle forces in colloidal dispersions. Langmuir, 18 (6). pp. 2448-2449.

Lei, Chengwang, and Patterson, John C. (2002) Natural convection in a reservoir sidearm subject to solar radiation: a two-dimensional simulation. Numerical Heat Transfer, Part A, Applications, 42 (1 & 2). pp. 13-32.

Lei, C., and Patterson, J.C. (2002) Natural convection in a reservoir sidearm subject to solar radiation: experimental observations. Experiments in Fluids, 32 (5). pp. 590-599.

Leong, Kenneth, and Mazierska, Janina (2002) Precise measurements of the Q factor of dielectric resonators in the transmission mode: accounting for noise, crosstalk, delay of uncalibrated lines, coupling loss, and coupling reactance. IEEE Transactions on Microwave Theory and Techniques, 50 (9). pp. 2115-2127.

Leong, Y.K., and Yeow, Y.L. (2002) Processing the Couette viscometry data of molasses by Tikhonov regularisation. International Sugar Journal, 104 (1246). pp. 463-467.

Leong, Y., Maguire, K., and Ridd, M.J. (2002) Rheology and pipeline transportation of final molasses. International Sugar Journal, 104 (1238). pp. 59-63.

Liow, Jong-leng (2002) Sloshing of melts in a bath smelting process having a elliptic cross section. Iron and Steel Institute of Japan International, 42 (7). pp. 694-701.

Lavarack, B.P., Griffin, G.J., and Rodman, D. (2002) The acid hydrolysis of sugarcane bagasse hemicellulose to produce xylose, arabinose, glucose and other products. Biomass & Bioenergy, 23 (5). pp. 367-380.

Liovic, P., Rudman, M., and Liow, J-L. (2002) A volume-tracking method for the modelling of multi-fluid flows in engineering unit operations. In: Proceedings of the 6th World Congress of Chemical Engineering. From: 6th World Congress of Chemical Engineering, 23-27 September 2001, Melbourne, VIC, Australia.

Leong, Yee Kwong, and Yeow, Y. Leong (2001) Compressive yield stress from multiple-speed centrifuge measurements. Aiche Journal, 47 (12). pp. 2798-2806.

Leong, Y.K., Seah, Ulric, Chu, S.Y., and Ong, B.C. (2001) Effects of Gum Arabic macromolecules on surface forces in oxide dispersions. Colloids and Surfaces A: physicochemical and engineering aspects, 182 (1-3). pp. 263-268.

Leong, Kenneth, and Mazierska, Janina (2001) Accurate measurements of surface resistance of HTS films using a novel transmission mode Q-factor technique. Journal of Superconductivity, 14 (1). pp. 93-103.

Leong, Y. (2001) Charged patch attraction in dispersion: effect of polystyrene sulphonate molecular weight or patch size. Colloid and Polymer Science, 279 (1). pp. 82-87.

Limin, Sun, Berndt, CC, Gross, KA, and Kucuk, A (2001) Material fundamentals and clinical performance of Plasma- Sprayed Hydroxyapatite Coatings: A review. Journal of biomedical materials research, 58 (5). pp. 570-592.

Lawrey, Eric, and Kikkert, Cornelis Jan (2001) Maximizing signal strength for OFDM inside buildings. IEEE Transactions on Microwave Theory and Techniques, 49 (11). pp. 2131-2136.

Lin, Wenxian, and Armfield, SW (2001) Natural convection cooling of rectangular and cylindrical containers. International Journal of Heat and Fluid Flow, 22. pp. 72-81.

Leong, Y., McBain, G.D., Chu, S.Y., and Ong, B.C. (2001) Pseudoplastic and viscoelastic behaviour of molasses. Proceedings of the Australian Society of Sugar Cane Technologists, 23. pp. 341-345.

Lei, Chengwang, Cheng, Liang, and Kavanagh, Ken (2001) Spanwise length effects on three-dimensional modelling of flow over a circular cylinder. Computer Methods in Applied Mechanics and Engineering, 190 (22-23). pp. 2909-2923.

Lavarack, B.P., Griffin, G.J., and Rodman, D. (2000) Measured kinetics of the acid-catalysed hydrolysis of sugar cane bagasse to produce xylose. Catalysis Today, 63 (2-4). pp. 257-265.

Liu, T., Karunasena, W.M., Kitipornchai, S., and Veidt, M. (2000) The influence of backward wave transmission on quantitative ultrasonic evaluation using Lamb wave propagation. Journal of the Acoustical Society of America, 107 (1). pp. 306-314.

Lin, Wenxian, and Armfield, S. W. (2000) Direct simulation of weak axisymmetric fountains in a homogeneous fluid. Journal of Fluid Mechanics, 403. pp. 67-88.

Lei, C., Patterson, J.C., and Lee, M. (2000) Visualisation of natural convection in a reservoir sidearm subject to surface radiation. In: Proceedings of the 7th Heath and Mass Transfer Conference. pp. 201-208. From: 7th Australasian Heat and Mass Transfer Conference, 3-6 July 2000, Townsville, QLD, Australia.

Lei, Chengwang, Cheng, Liang, and Kavanagh, Ken (2000) A finite difference solution of the shear flow over a circular cylinder. Ocean engineering, 27 (3). pp. 271-290.

Leong, Kenneth, and Mazierska, Janina (1998) Accounting for lossy coupling in measurements of Q-factors of transmission mode dielectric resonators. In: Proceedings of the 1998 Asia-Pacific Microwave Conference, APMC 98. pp. 209-212. From: APMC 1998: Beyond the Wireless Multimedia Society, 8-11 December 1998, Yokohama, Japan.

Leong, Kenneth, Mazierska, Janina, and Krupka, Jerzy (1997) Measurements of unloaded Q-factor of transmission mode dielectric resonators. In: 1997 IEEE MTT-S International Microwave Symposium Digest (3) TH3F-38. pp. 1639-1642. From: 1997 IEEE MTT-S International Microwave Symposium, 8-13 June 1997, Denver, Colorado, USA.

Leong, Kenneth, Grabovickic, Robert, and Ceremuga, Janina (1996) Review of methods for determining the loaded Q-factor of microwave resonators. In: Proceedings of the Australian and New Zealand Institutes of Physics 20th Annual Condensed Matter Physics Meeting. TP30-TP30. From: ANZIP 1996: Australian and New Zealand Institutes of Physics 20th Annual Condensed Matter Physics Meeting, 30 January - 2 February 1996, Wagga Wagga, NSW.

Lovisa, Amy (2015) Characterising the fatigue response of corrugated roof cladding. PhD thesis, James Cook University.

Lovisa, Julie (2012) An insight into time rate of consolidation. PhD thesis, James Cook University.

Lu, Tao (2010) Nanostructure confinement of ammonia borane within porous silica and carbon for hydrogen storage. PhD thesis, James Cook University.

Lee, Andrew (2008) Modelling the solids transport phenomena within flighted rotary dryers. PhD thesis, James Cook University.

Lowe, Rodney William (2004) Development of a novel rotationally moulded solar hot water system. Masters (Research) thesis, James Cook University.

M

Mejame Mejame, Palle Paul, King, David, Banhalmi-Zakar, Zsuzsa, and He, Yinghe (2022) Circular economy: A sustainable management strategy for rare earth elements consumption in Australia. Current Research in Environmental Sustainability, 4. 100157.

Malekzadeh, M., Sivakugan, Siva, and Clark, M.W. (2022) Effect of aqueous environment on sedimentation of dredged mud and kaolinite. Marine Georesources & Geotechnology, 40 (2). pp. 171-180.

Madanayaka, Thushara Asela, and Sivakugan, Nagaratnam (2022) Relationship between minimum creep length and maximum exit hydraulic gradient in sheet pile cofferdams. Geotechnical and Geological Engineering, 40 (10). pp. 4911-4928.

Mustafa, Akram, and Rahimi Azghadi, Mostafa (2021) Automated machine learning for healthcare and clinical notes analysis. Computers, 10 (2). 24.

Mutjaba, H., Javed, M.T., Farooq, Khalid, Sivakugan, N., and Das, B.M. (2021) Axial capacity evaluation of rock-socketed cast-in-situ concrete piles. Soil Mechanics and Foundation Engineering, 58 (2). pp. 152-158.

Madhukumar, Neethu, Wang, Eric, Zhang, Yi-Fan, and Xiang, Wei (2021) Consensus forecast of rainfall using hybrid climate learning model. IEEE Internet of Things Journal, 8 (9). pp. 7270-7278.

Masoudi Nejad, R., Tohidi, M., Wheatley, G., Jalayerian Darbandi, A., and Ghasemi, H. (2021) Effect of rivet material and punch pressure on equivalent plastic strain of riveted joints in Al alloy 2024 plates. In: Proceedings of the 4th International Conference on Mechanical Engineering, Industries and Aerospace. From: 4th International Conference on Mechanical Engineering, Industries and Aerospace, 2 March 2021, Hamadan, Iran.

Malekzadeh, M., and Sivakugan, N. (2021) Laboratory evaluation of electrokinetic dewatering of dredged marine sediment as an option for climate change adaption. In: IOP Conference Series: Earth and Environmental Science (710) 012030. From: 18th Nordic Geotechnial Meeting, 18-19 January 2021, Helsinki, Finland.

Masoudi Nejad, Reza, Liu, Zhiliang, and Wheatley, Greg (2021) On fatigue crack growth of railway rails under mixed-mode loading conditions. In: Proceedings of the 6th International Conference on Science and Technology. From: 6th International Conference on Science and Technology: with sustainable development approach, 10 March 2021, Tehran, Iran.

Masoudi Nejad, Reza, Berto, Filippo, Wheatley, Greg, Tohidi, Mohammadreza, and Ma, Wenchen (2021) On fatigue life prediction of Al-alloy 2024 plates in riveted joints. Structures, 33. pp. 1715-1720.

Masoudi Nejad, Reza, Noroozian Rizi, Peyman, Wheatley, Greg, and Ghasemi, Hosein (2021) Stress intensity factor evaluation for fatigue crack in working roll due to hot rolling process. In: Proceedings of the 6th International Conference on Science and Technology. From: 6th International Conference on Science and Technology: with sustainable development approach, 10 March 2021, Tehran, Iran.

Majeed, Mobin, Khan, HM, Wheatley, Greg, and Situ, Rong (2021) A numerical approach to assess the impact of the SLM laser parameters on thermal variables. Journal of Additive Manufacturing Technologies, 1 (3).

Mulenga, Gloria M., Henning, Lars, Chilongo, Kalinga, Mubamba, Chrisborn, Namangala, Boniface, and Gummow, Bruce (2020) Insights into the control and management of human and bovine African Trypanosomiasis in Zambia between 2009 and 2019-a review. Tropical Medicine and Infectious Disease, 5 (3).

Munro, Thomas, Miller, Catherine M., Antunes, Elsa, and Sharma, Dileep (2020) Interactions of osteoprogenitor cells with a novel zirconia implant surface. Journal of Functional Biomaterials, 11 (3). 50.

Munro, Thomas, Sharma, Dileep, Miller, Catherine, and Dos Santos Antunes, Elsa (2020) Interactions of osteoprogenitor cells with a novel zirconia implant surface. In: [Presented at the 98th General Session & Exhibition of the IADR/49th Annual Meeting & Exhibition of the AADR]. 2296. From: 98th General Session & Exhibition of the IADR/49th Annual Meeting & Exhibition of the AADR, 18-21 March 2020, Washington, D.C., USA.

Mujtaba, H, Farooq, K, Sivakugan, N, and Das, B M (2020) Laboratory and field investigations in granular soils to correlate relative density, relative compaction and grain size. Journal of the South African Institution of Civil Engineering, 62 (2). 0516. pp. 12-21.

McCormick, Mark I., Chivers, Douglas P., Ferrari, Maud C.O., Blandford, Makeely I., Nanninga, Gerrit P., Richardson, Celia, Fakan, Eric P., Vamvounis, George, Gulizia, Alexandra M., and Allan, Bridie J.M. (2020) Microplastic exposure interacts with habitat degradation to affect behaviour and survival of juvenile fish in the field. Proceedings of the Royal Society of London Series B, Biological Sciences, 287 (1937). 20201947.

McNabb, Tim, Wicking, Kristin, Myers, Trina, and Lei, Lei (2020) Optimizing clinical spatial resources with IoT. In: Proceedings of the Australasian Computer Science Week Multiconference. 30. From: ACSW 2020: Australasian Computer Science Week Multiconference, 3-7 February 2020, Melbourne, VIC, Australia.

Majeed, Mobin, and Wheatley, Greg (2020) Steering system design of the second generation Formula SAE. Mobility & Vehicle Mechanics, 46 (2). pp. 55-61.

Madanayaka, Thushara Asela, and Sivakugan, Nagaratnam (2020) Validity of the method of fragments for seepage analysis in circular cofferdams. Geotechnical and Geological Engineering, 38. pp. 1547-1565.

Madanayaka, Thushara Asela, and Sivakugan, Nagaratnam (2019) Simple solutions for square and rectangular cofferdam seepage problems. Canadian Geotechnical Journal, 56 (5). pp. 730-745.

McFarland, Mitchell, and Antunes, Elsa (2019) Small-scale static fire tests of 3D printing hybrid rocket fuel grains produced from different materials. Aerospace, 6 (7). 81.

Mujtaba, Hassan, Farooq, Khalid, Sivakugan, Sivakugan, and Das, Braja M. (2018) Evaluation of relative density and friction angle based on SPT-N values. KSCE Journal of Civil Engineering, 22 (2). pp. 572-581.

Mujtaba, Hassan, Aziz, Tahir, Farooq, Khalid, Sivakugan, Siva, and Das, Braja M. (2018) Improvement in engineering properties of expansive soils using ground granulated blast furnace slag. Journal Geological Society of India, 92 (3). pp. 357-362.

Mei, Jie, Zheng, Kan, Zhao, Long, Lei, Lei, and Wang, Xianbin (2018) Joint radio resource allocation and control for vehicle platooning in LTE-V2V network. IEEE Transactions on Vehicular Technology, 67 (12). pp. 12218-12230.

McNabb, Timothy, Myers, Trina, Wicking, Kristin, Lei, Lei, and Xiang, Wei (2018) Optimizing spatial healthcare assets with Internet of Things. Health Information Science and Systems, 6. 11.

Madanayaka, Thushara Asela, and Sivakugan, Nagaratnam (2017) Adaptation of method of fragments to axisymmetric cofferdam seepage problems. International Journal of Geomechanics, 17 (9). 0601701.

Madanayaka, Thushara, Sivakugan, Siva, and Ameratunga, Jay (2017) Validity of the method of fragments for seepage analysis in double-wall cofferdams. In: Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering. TC213. pp. 2921-2924. From: ICSMGE 2017: 19th International Conference on Soil Mechanics and Geotechnical Engineering, 17-22 September 2017, Seoul, South Korea.

Mazigi, Ohan, Kannan, M. Bobby, Xu, Jia, Han-Cheol, Choe, and Qingsong, Ye (2017) Biocompatibility and degradation of a low elastic modulus Ti-35Nb-3Zr alloy: nanosurface engineering for enhanced degradation resistance. ACS Biomaterials Science & Engineering, 3 (4). pp. 509-517.

Malekzadeh, M., and Sivakugan, N. (2017) Double drain electrokinetic stabilization of dredged mud using stainless steel electrodes and application of surcharge. KSCE Journal of Civil Engineering, 21 (7). pp. 2615-2621.

Malekzadeh, M., Sivakugan, N., Kazum, O., and Mathan, B. (2017) Effect of polyaniline-coated galvanized steel electrodes on electrokinetic sedimentation of dredged mud slurries. Canadian Geotechnical Journal, 54 (8). pp. 1150-1157.

Malekzadeh, Mona, and Sivakugan, Siva (2017) One-dimensional electrokinetic stabilization of dredged mud. Marine Georesources & Geotechnology, 35 (5). pp. 603-609.

Mahmud, Nasif, Zahedi, Ahmad, and Mahmud, Asif (2017) A cooperative operation of novel PV inverter control scheme and storage energy management system based on ANFIS for voltage regulation of grid-tied PV system. IEEE Transactions on Industrial Informatics, 13 (5). pp. 2657-2668.

Mahmud, Nasif, Zahedi, Ahmad, and Rahman, Md Shalimur (2017) An event-triggered distributed coordinated voltage control strategy for large grid-tied PV system with battery energy storage. In: Proceedings of the 2017 Australasian Universities Power Engineering Conference. From: AUPEC: 2017 Australasian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, VIC, Australia.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Armfield, S.W., and He, Yinghe (2016) Interaction behavior of triple transitional round fountains in a homogeneous fluid. International Journal of Heat and Fluid Flow, 62 (Part B). pp. 437-454.

Malekzadeh, M., and Sivakugan, S. (2016) Assessing the use of aluminium electrodes on the electrokinetic dewatering and stabilization of dredged mud slurries. In: Selected Papers from Sessions of Geo-Chicago 2016. pp. 188-202. From: Geo-Chicago 2016: sustainable waste management and remediation, 14-18 August 2016, Chicago, IL, USA.

Mahmud, Nasif, Zahedi, Ahmad, and Mahmud, Asif (2016) ANFISPID-based voltage regulation strategy for grid-tied renewable DG system with ESS. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference. pp. 81-86. From: ISGT-Asia 2016: IEEE Innovative Smart Grid Technologies Conference, 28 November - 1 December 2016, Melbourne, VIC, Australia.

Madanayaka, Thushara Asela, and Sivakugan, Siva (2016) Approximate equations for the method of fragment. International Journal of Geotechnical Engineering, 10 (3). pp. 297-303.

Mahmud, Nasif, Zahedi, Ahmad, and Mahmud, Asif (2016) Dynamic voltage regulation of grid-tied renewable energy system with ANFIS. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-6. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Murray, A., Khakbaz, H., Pranowo, A., Aslin, N., and Kannan, M. Bobby (2016) Effects of process parameters on the adhesive strength of copper electrodeposits in a bench-scale electrowinning cell. Institution of Mining and Metallurgy. Transactions. Section C: Mineral Processing and Extractive Metallurgy, 125 (1). pp. 10-16.

Malekzadeh, M., and Sivakugan, N. (2016) Experimental study on intermittent electroconsolidation of singly and doubly drained dredged sediments. International Journal of Geotechnical Engineering, 11 (1). pp. 32-37.

Madanayaka, Thushara, and Sivakugan, Siva (2016) Simplified method of fragments based two dimensional seepage solution for the double-wall cofferdam. In: Proceedings of the 19th Southeast Asian Geotechnical Conference. pp. 1047-1051. From: SEAGC 2016: 19th Southeast Asian Geotechnical Conference, 31 May - 3 June 2016, Subang Jaya, Malaysia.

Mazierska, Janina, Bangsaeng, Mongkhon, and Kerans, Andrew (2015) Performance of public protection and disaster relief with conventional and high temperature superconducting receive filters in the 800 MHz spectrum in Australia. IEEE Transactions on Applied Superconductivity, 25 (5). 501512. pp. 1-12.

Malekzadeh, M., Lovisa, J., and Sivakugan, S. (2015) Consolidation of Cannington mine tailing. In: Proceedings of the 12th Australia New Zealand Conference on Geomechanics (3) P016. From: ANZ 2015: 12th Australia New Zealand Conference on Geomechanics, 22-25 February 2015, Wellington, New Zealand.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Hill, Blair, Armfield, S.W., and He, Yinghe (2015) Behavior of the interaction between twin transitional round fountains in a homogeneous fluid, Part 1: experimental study. International Journal of Heat and Mass Transfer, 86. pp. 957-972.

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Armfield, St.W., and He, Yinghe (2015) Behavior of the interaction between twin transitional round fountains in a homogeneous fluid, Part 2: numerical study. International Journal of Heat and Mass Transfer, 86. pp. 973-991.

Malekzadeh, M., Lovisa, J., Sivakugan, S., and Mathan, B. (2014) Physiochemical changes during electrokinetic stabilisation of dredged mud. In: Proceedings of the 7th International Congress on Environmental Geotechnics. pp. 1473-1484. From: ICEG 2014: 7th International Congress on Environmental Geotechnics, 10-14 November 2014, Melbourne, VIC, Australia.

Mazierska, Janina, Leong, Kenneth, Ledenyov, Dimitri, Rains, Adam, Zuchowski, Nina, and Krupka, Jerzy (2014) Microwave measurements of surface resistance and complex conductivity of NdBaCuO films. In: Advances in Science and Technology (95) pp. 162-168. From: 6th Forum on New Materials, 14-20 June 2014, Montecatini Terme.

May, J., Sheehan, M., Ajayi, O., and Hickey, T. (2014) Bagasse dryer design using multi-scale compartment models. In: Proceedings of the Australian Society of Sugar Cane Technologists (36) pp. 506-515. From: ASSCT 2014: 36th Annual Conference of the Australian Society of Sugar Cane Technologists, 28 April - 1 May 2014, Broadbeach, QLD, Australia.

Mazierska, Janina (2013) Microwave properties and applications of HTS materials: history and progress. In: Presentations from the East Asia Symposium on Superconductive Electronics. p. 46. From: EASSE 2013: 7th East Asia Symposium on Superconductive Electronics, 23-26 October 2013, Taipei, Taiwan.

Mujtaba, Hassan, Farooq, Khalid, Sivakugan, Nagaratnam, and Das, Braja M. (2013) Correlation between gradational parameters and compaction characteristics of sandy soils. International Journal of Geotechnical Engineering, 7 (4). pp. 395-401.

Ma, Fangfang, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, and Li, Ming (2013) An experimental study on the impacts of key parameters of all-glass evacuated tubes on the thermal performances of all-glass evacuated tube solar water heaters. Journal of Renewable and Sustainable Energy, 5. 023140. pp. 1-14.

Miller, Craig, Holmes, John, Henderson, David, Ginger, John, and Morrison, Murray (2013) The response of the dines anemometer to gusts and comparisons with cup anemometers. Journal of Atmospheric and Oceanic Technology, 30 (7). pp. 1320-1336.

Mahmud, H., Hill, B., Gao, W., Lin, W., He, Y., and Armfield, S.W. (2012) PIV study on the interaction of triple transitional round fountains in a homogeneous fluid. In: Proceedings of the 18th Australasian Fluid Mechanics Conference. 93. pp. 1-4. From: 18th Australasian Fluid Mechanics Conference, 3-7 December 2012, Launceston, Tasmania, Australia.

Mahmud, H., Lin, Wenxian, Gao, Wenfeng, He, Yinghe, and Armfield, S.W. (2012) Direct numerical simulation of interaction of twin transitional fountains in a homogeneous fluid. In: Proceedings of the 4th International Conference on Computational Methods (ICCM 2012). 149. pp. 1-8. From: 4th International Conference on Computational Methods (ICCM 2012), 25-28 NOV 2012, Gold Coast, Australia.

Ma, Fang-fang, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2012) Experimental study on the influence of the absorptance of the selective absorbing coating on the thermal performance of all-glass evacuated tubes. Journal of Yunnan Normal University, 32 (4). pp. 17-22.

Mazierska, Janina (2012) Analysis of wireless communication In North Queensland Australia with HTS front end receivers. In: International Symposium on High Temperature Superconductors in High Frequency Fields. pp. 20-23. From: 11st International Symposium on High Temperature Superconductors in High Frequency Fields, 29 May - 1 June 2012, Yamagata University, Japan.

Mazierska, Janina, Krupka, Jerzy, and Wosik, J. (2012) Measurements of intrinsic losses of high temperature superconducting thin films: surface resistance and conductivity. In: International Symposium on High Temperature Superconductors in High Frequency Fields. pp. 7-8. From: 11th International Symposium on High Temperature Superconductors in High Frequency Fields, 29 May - 1 June 2012, Yamagata University, Japan.

Mahmud, Hasan, Hill, Blair, Gao, Wenfeng, Lin, Wenxian, He, Yinghe, and Armfield, Steven (2012) PIV Study of behavior of interaction of twin fountains in homogenous fluid. In: Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics. FM05-048. pp. 1-2. From: ICTAM 2012: 23rd International Congress of Theoretical and Applied Mechanics, 19-24 August 2012, Beijing, China.

Mathan, M. Bobby, Dietzel, W., and Zettler, R. (2011) In vitro degradation behaviour of a friction stir processed magnesium alloy. Journal of Materials Science: Materials in Medicine, 22 (11). pp. 2397-2401.

Molla, M.M., Saha, S.C., Khan, M.A.I., and Hossain, M.A. (2011) Radiation effects on natural convection laminar flow from a horizontal circular cylinder. Desalination and Water Treatment, 30 (1-3). pp. 89-97.

Molla, Md. Mamun, Saha, Suvash C., and Hossain, Md. Anwar (2011) Radiation effect on free convection laminar flow along a vertical flat plate with streamwise sinusoidal surface temperature. Mathematical and Computer Modelling, 53 (5-6). pp. 1310-1319.

Morgan, Blain A., Shukla, Sanjay K., and Sivakugan, Nagaratnam (2010) An experimental study on the additional settlement of footing resting on granular soils by water table rise. Soils and Foundations, 50 (2). pp. 319-324.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2010) Characteristics of instability of radiation-induced natural convection in shallow littoral waters. International Journal of Thermal Sciences, 49 (1). pp. 170-181.

Mathan, M. Bobby, and Raja, V.S. (2010) Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization. Engineering Fracture Mechanics, 77 (2). pp. 250-256.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2010) Unsteady near-shore natural convection induced by surface cooling. Journal of Fluid Mechanics, 642. pp. 213-233.

Mulligan, Renae, Yin, Ling, Lamont, Anthony, Peng, Zhongxiao, Forwood, Mark R., and Teoh, Swee Hin (2010) Effect of penetration rate on insertion force in trabecular bone biopsy. Materials Science Forum, 654-656. pp. 2225-2228.

Mazierska, Janina, and Gileppa, Jesse (2010) Investigation into improving coverage and capacity of CDMA wireless base stations with CRFE in rural environment. In: Proceedings of 2010 Asia-Pacific Microwave Conference. pp. 211-214. From: APMC 2010 Asia-Pacific Microwave Conference, 7-10 December 2010, Yokohama, Japan.

Moreira, Robert L., Lobo, Ricardo P.S.M., Subodh, Ganesanpotti, Sebastian, Mailadil T., Jacob, Mohan V., and Dias, Anderson (2009) Microwave and infrared dielectric properties of Sr1−3x/2CexTiO3(x = 0.154–0.400) incipient ferroelectrics at cryogenic temperatures. Journal of Physics D: applied physics, 42. - .

Mazierska, Janina (2009) Microwave characterization of materials for telecommunication systems. In: Proceedings of the 2009 IEEE Youth Conference on Information, Computing and Telecommunications. P-01. p. 1. From: YC-ICT 2009: 2009 IEEE Youth Conference on Information, Computing and Telecommunications, 20-21 September 2009, Bejing, China.

Mao, Yadan, Lei, Chengwang, and Patterson, John C. (2009) Unsteady natural convection in a triangular enclosure induced by absorption of radiation – a revisit by improved scaling analysis. Journal of Fluid Mechanics, 662. pp. 75-102.

Mathan, M. Bobby, Singh Raman, R.K., and Khoddam, S. (2008) Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and an interstitial-free steel. Corrosion Science, 50 (10). pp. 2879-2884.

Mathan, M. Bobby, Gomes, D., Dietzel, W., and Abetz, V. (2008) Polyoxadiazole-based coating for corrosion protection of magnesium alloy. Surface & Coatings Technology, 202 (19). pp. 4598-4601.

Mathan, M. Bobby, and Raja, V.S. (2007) Influence of heat treatment and scandium addition on the electrochemical polarization behavior of Al-Zn-Mg-Cu-Zr alloy. Metallurgical & Materials Transactions A, 38 (11). pp. 2843-2852.

Mphale, Kgakgamatso, Jacob, Mohan, and Heron, Mal (2007) Prediction and measurement of electron density and collision frequency in a weakly ionised pine fire. Journal of Infrared, Millimeter and Terahertz Waves, 28 (3). pp. 251-262.

Mao, Yadan, Lei, Chengwang, and Patterson, John (2007) Natural convection in a triangular enclosure induced by solar radiation. In: 16th Australasian Fluid Mechanics Conference. pp. 406-410. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Mathew, Vincent, and Jacob, Mohan V. (2007) Simulation of microstrip structures on LTCC substrates. In: Proceedings of the International Conference on Advanced Materials and Composites. pp. 696-700. From: International Conference on Advanced Materials and Composites, 24-26 October 2007, Thiruvananthapuram, India.

Michlik, P., and Berndt, C. (2006) Image-based extended finite element modeling of thermal barrier coatings. Surface and Coatings Technology, 201 (6). pp. 2369-2380.

Mazierska, Janina, and Jacob, Mohan V. (2006) How accurately can the surface resistance of various superconducting films be measured with the sapphire Hakki–Coleman dielectric resonator technique? Journal of Superconductivity and Novel Magnetism, 19 (7-8). pp. 649-655.

Monk, J.S., and Jegatheesan, V. (2006) Sugar and molasses optimization during denitrification of aquaculture wastewater in a membrane bioreactor. In: Proceedings of the World Water Congress. From: 5th Biennial World Water Congress, 10-14 SEP 2006, Beijing, China.

Mandin, Philippe, Fabian, Cesimiro, and Lincot, Daniel (2006) Importance of the density gradient effects in modelling electrodeposition process at a rotating cylinder electrode. Electrochimica Acta, 51 (19). pp. 4067-4079.

Mandin, Ph., Fabian, C., and Lincot, D. (2006) Mean and unsteady hydrodynamic and mass transport properties at a rotating cylinder electrode: from laminar to transitional flow regime. Journal of Electroanalytical Chemistry, 586 (2). pp. 276-296.

Mazierska, J., Krupka, J., Bialkowski, M., and Jacob, M.V. (2006) Microwave resonators and their use as measurement instruments and sensors. In: Proceedings of the Third IEEE International Workshop on Electronic Design, Test and Applications 2006. From: Third IEEE International Workshop on Electronic Design, Test and Applications 2006, 17-19 January 2006, Kuala Lumpur, Malaysia.

Mariaux, G., Vardelle, A., Vardelle, M., and Berndt, C. (2006) Time-dependent gas dynamics and gas-particle heat and mass transfer during plasma spray deposition. In: Proceedings of the 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Meekan, M.G., Carleton, J.H., Steinberg, C.R., McKinnon, A.D., Brinkman, R., Doherty, P.J., Halford, A., Duggan, S., and Mason, L. (2006) Turbulent mixing and mesoscale distributions of late-stage fish larvae on the NW shelf of Western Australia. Fisheries Oceanography, 15 (1). pp. 44-59.

Mazierska, Janina, Ledenyov, Dimitri, Jacob, Mohan V., and Krupka, Jerzy (2005) Precise microwave characterization of MgO substrates for HTS circuits with superconducting post dielectric resonator. Superconductor Science & Technology, 18 (1). pp. 18-23.

Mazierska, Janina, Jacob, Mohan V., Ledenyov, Dimitri, and Krupka, Jerzy (2005) Loss tangent measurements of dielectic substrates from 15K to 300K with two resonators: investigation into accuracy issues. In: Proceedings of Asia Pacific Microwave Conference 2005. pp. 2370-2373. From: Asia Pacific Microwave Conference 2005, 4-7 December 2005, Suzhou, China.

Mazierska, Janina, Krupka, Jerzy, and Jacob, Mohan V. (2005) Precise microwave characterisation of low loss dielectrics. In: Papers from Microwave Workshops and Exhibition MWE2005. pp. 295-300. From: Microwave Workshops and Exhibition MWE2005, 9 -11 November 2005, Yokohama, Japan.

Mathan, M. Bobby, Raja, V.S., and Mukhopadhyay, A.K. (2004) Determination of true stress corrosion cracking susceptibility index of a high strength Al alloy using glycerin as the non-corrosive atmosphere. Scripta Materialia, 51 (11). pp. 1075-1079.

McConochie, Jason D., Hardy, Thomas A., and Mason, Luciano B. (2004) Modelling tropical cyclone over-water wind and pressure fields. Ocean engineering, 31 (14-15). pp. 1757-1782.

Mazierska, Janina, Krupka, Jerzy, Jacob, Mohan V., and Ledenyov, Dimitri (2004) Complex permittivity measurements at viable temperatures of low loss dielectric substrates employing split post and single post dielectric resonators. In: Proceedings of 2004 IEEE MTT-S International Microwave Symposium Digest (3) pp. 1825-1828. From: 2004 International Microwave Symposium, 6 -11 June 2004, Fort Worth, Texas, USA.

Mazierska, Janina, and Jacob, Mohan (2004) High temperature superconducting planar filters for wireless communication. In: Kiang, Jean-Fu, (ed.) Novel Technologies for Microwave and Millimeter-Wave Applications. Kluwer Academic Publishers, Boston, USA, pp. 123-151.

Mazierska, Janina, Jacob, Mohan V., and Krupka, Jerzy (2004) Precise microwave characterisation of materials for emerging technologies. In: Proceedings of Asia Pacific Microwave Conference 2004. pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Mazierska, Janina, Jacob, Mohan V., and Krupka, Jerzy (2004) Precise microwave characterization of lanthanum aluminate and LSAT substrates for HTS circuits with superconducting post dielectric resonator. In: Proceedings of the 6th European Conference on Applied Superconductivity . pp. 2708-2715. From: 6th European Conference on Applied Superconductivity , 14-18 September 2003, Sorrento, Italy.

Mazierska, Janina (2004) Superconducting cryogenic front end receivers. In: Proceedings of the MIKON 2004 - 15th International Conference on Microwaves, Radar and Wireless Communications (1) pp. 351-354. From: MIKON 2004 - 15th International Conference on Microwaves, Radar and Wireless Communications , 17-19 May 2004, Warszawa, Poland.

Mazierska, Janina, McGrath, Jonathon, and Jacob, Mohan V. (2003) Optimisation of Hakki-Coleman dielectric resonators for precise microwave characterisation of low loss low permittivity dielectrics. In: Proceedings of APMC 2003. pp. 925-928. From: APMC 2003 Asia-Pacific Microwave Conference, 4-7 November 2003, Seoul, Korea.

Mazierska, J., and Liu, J.Z.M. (2003) Computations of unloaded Q0-Factor and resonant frequency of the TE011 mode Hakki–Coleman dielectric resonators with coupling structures using ANSOFT HFSS. Journal of Superconductivity, 16 (5). pp. 843-855.

Messer, Tracey, and Jegatheesan, Veeriah (2003) Application of floating medium filters for aquaculture wastewater treatment. In: Proceedings of the Ozwater Convention & Exhibition 2003. From: Ozwater Convention & Exhibition 2003, 6-10 April 2003, Perth, WA, Australia.

Matheson, Michael, Hardy, Tom, and Kapitzke, Ross (2003) Designing mooring systems for tourist pontoons in coral reef environments. In: Proceedings of the Coasts & Ports Australasian Conference 2003. pp. 1-8. From: Coasts & Ports Australasian Conference 2003, 9-12 September, 2003, Auckland, New Zealand.

Mason, Luciano B., Hardy, Thomas A., and Bailey, Wesley G. (2003) Issues in development of a langrangian transport model. In: Proceedings of the Coasts & Ports Australasian Conference 2003. pp. 1-9. From: Coasts & Ports Australasian Conference 2003, 9-12 September, 2003, Auckland, New Zealand.

Mazierska, Janina, Jacob, Mohan V., Harring, Andrew, Krupka, Jerzy, Barnwell, Peter, and Sims, Theresa (2003) Measurements of loss tangent and relative permittivity of LTCC ceramics at varying temperatures and frequencies. Journal of the European Ceramic Society, 23 (14). pp. 2611-2615.

Mazierska, J., Jacob, M.V., and Au Yeung, T.F. (2003) Temperature dependence of relative permittivity and loss tangent of novel transparent substrate material at microwave frequencies. In: Proceedings of the International Conference on Materials for Advanced Technologies. pp. 224-227. From: International Conference on Materials for Advanced Technologies , 7-12 December 2003, Singapore.

Maskell, Douglas L., and Woods, Graham S. (2003) An adaptive subsample delay estimator using a quadrature demodulator. In: Proceedings of the Joint 4th International Conference on Information Communications and Signal Processing, 2003 and 4th Pacific Rim Conference on Multimedia (3) 2B4.6. pp. 1-4. From: Joint ACICS-PCM 2003, 15-18 December 2003, Singapore.

Mazierska, Janina, McGrath, Jonathon, and Jacob, Mohan V. (2002) Accuracy comparison of the multifrequency and the three frequencies computations of loss tangent and relative permittivity of low loss dielectric materials using the dielectric resonator technique. In: Proceedings of the 2002 Asia-Pacific Microwave Conference. From: 2002 Asia-Pacific Microwave Conference (APMC 2002), 19-22 November 2002, Kyoto, Japan.

Morgan, P.L., Armfield, S.W., Lin, Wenxian, and Patterson, J.C. (2002) Direct numerical simulation of boundary layer start-up on semi-infinite vertical flat plates for buoyant and non-buoyant flows. Computational Fluid Dynamics Journal, 11 (1). pp. 18-26.

Mcmurray, Scott Herbert, and Griffin, Gregory John (2002) Extraction of aconitic acid from mixtures of organic acids and cane molasses solutions using supported liquid membranes. Journal of Chemical Technology and Biotechnology, 77 (11). pp. 1262-1268.

Mazierska, Janina, and Wilker, Charles (2001) Accuracy issues in surface resistance measurements of high temperature superconductors using dielectric resonators. IEEE Transactions on Applied Superconductivity, 11 (1). pp. 3217-3225.

Mazierska, Janina, and Wilker, Charles (2001) Accuracy issues in surface resistance measurements of high temperature superconductors using dielectric resonators (corrected). IEEE Transactions on Applied Superconductivity, 11 (4). pp. 4140-4147.

Mazierska, Janina, and Jacob, Mohan V. (2001) Progress in high temperature superconducting planar filters for wireless communication. In: Asia Pacific Microwave Conference (3) pp. 1004-1007. From: Microwaves for New Century APMC 2001, 3-6 December 2001, Taipei, Taiwan, R.O.C..

Mazierska, Janina, and Krupka, Jerzy (2000) Dielectric resonators for low temperature electronics applications. In: Proceedings of 13th International Conference on Microwaves, Radar and Wireless Communications (MIKON-2000) (1) pp. 45-48. From: MIKON-2000: 13th International Conference on Microwaves, Radar and Wireless Communications, 22-24 May 2000, Wrocław, Poland.

McBain, G.D., Suehrcke, H., and Harris, J.A. (2000) Evaporation from an open cylinder. International Journal of Heat and Mass Transfer, 43 (12). pp. 2117-2128.

Mazierska, J., Leong, K.T., and Jacob, M.V. (2000) Microwave characterisation of superconducting materials: what accuracy can be achieved in surface resistance measurements using the Hakki-Coleman dielectric resonators? In: Proceedings of the 2000 Asia-Pacific Microwave Conference. pp. 608-611. From: 2000 Asia-Pacific Microwave Conference, 3-6 December 2000, Sydney, NSW, Australia.

McBain, G.D., Harris, J.A., Leong, Y., and Vigh, S. (2000) Viscoelastic characterisation of low-grade molasses by jet-swell measurements. In: Proceedings of the 22nd Annual Conference of the Australian Society of Sugar Cane Technologists (22) pp. 467-473. From: Australian Society of Sugar Cane Technologist Conference, 2-5 May 2000, Bundaberg, QLD, Australia.

Mazierska, J., and Grabovickic, R. (1999) Surface resistance of YBa2Cu3O7 superconducting films on LaAlO3, NdGaO3 and Al2O3 substrates at varying microwave power levels. In: Proceedings of the 1999 Asia Pacific Microwave Conference: microwaves enter the 21st century (3) D2.2. pp. 622-625. From: APMC 1999: 1999 Asia Pacific Microwave Conference: microwaves enter the 21st century, 30 November - 3 December 1999, Singapore.

Mazierska, Janina, and Grabovickic, Robert (1998) Circulating power, RF magnetic field, and RF current density of shielded dielectric resonators for power handling analysis of high-temperature superconducting thin films of arbitrary thickness. IEEE Transactions on Applied Superconductivity, 8 (4). pp. 178-187.

Mazierska, Janina E., and Allen, Gregory H. (1998) Analysis of high frequency properties of multilayer structures for multichip modules. Applied Superconductivity, 4 (12). pp. 635-643.

Mazierska, Janina E. (1998) High temperature superconducting films and HTS devices for wireless communication systems. In: Proceedings of the 12th International Conference on Microwaves and Radar (MIKON-98) (3) A10/5. pp. 853-857. From: MIKON-1998: 12th International Conference on Microwaves and Radar, 20-22 May 1998, Kraków, Poland.

Mazierska, Janina (1997) Dielectric resonator as a possible standard for characterization of high temperature superconducting films for microwave applications. Journal of Superconductivity, 10 (2). pp. 73-84.

Mazierska, Janina (1997) Sapphire and rutile dielectric resonators for measurements of surface resistance of superconducting thin films. In: 1997 Asia-Pacific Microwave Conference Proceedings (1) pp. 125-128. From: APMC 1997: 1997 Asia-Pacific Microwave Conference, 2-5 December 1997, Hong Kong.

Mahmud, Hasan (2014) Behavior of multiple transitional round fountains interacting in homogeneous and stratified fluids. PhD thesis, James Cook University.

N

Nguyen, D., Kirkpatrick, M.P., Williamson, N., Armfield, S.W., and Lin, W. (2022) Effects of meander curvature in thermally stratified turbulent open-channel flow. Physics of Fluids, 34 (9). 096601.

Nguyen, Duy, Kirkpatrick, Michael P., Williamson, N., Armfield, S.W., and Lin, W. (2022) Turbulence structure in a very sharp thermally stratified open-channel meander. Physics of Fluids, 34. 035130.

Nguyen, Quang Khai, Jung, Kwang Hyo, Lee, Gang Nam, Park, Hyun jung, To, Peter, Suh, Sung Bu, and Lee, Jaeyong (2021) Bubble formation in globe valve and flow characteristics of partially filled pipe water flow. International Journal of Naval Architecture and Ocean Engineering, 13. pp. 554-565.

Niroshan, Naguleswaran, Sivakugan, Nagaratnam, and Veenstra, Ryan (2021) Effects of curing methods on UCS test specimens and variability of mechanical properties of cemented paste backfill. International Journal of Geotechnical Engineering, 15 (9). pp. 1188-1197.

Nematollahi, Neda, Ross, Perran, Hoffmann, Ary A., Kolev, Spas D., and Steinemann, Anne (2021) Limonene emissions: Do different types have different biological effects? International Journal of Environmental Research and Public Health, 18. 10505.

Nejad, Reza Masoudi, Sadat Hoseini Shojaati, Zohreh, Wheatley, Greg, and Ghahremani Moghadam, Danial (2021) On the bending angle of aluminum-copper two-layer sheets in laser forming process. Optics & Laser Technology, 142. 107233.

Neupane, Rabindra, and Datta, Bithin (2021) Optimal characterization of unknown multispecies reactive contamination sources in an aquifer. Journal of Hydrologic Engineering, 26 (11). 04021035.

Nematollahi, Neda, Weinberg, Justine Lew, Flattery, Jennifer, Goodman, Nigel, Kolev, Spas D., and Steinemann, Anne (2021) Volatile chemical emissions from essential oils with therapeutic claims. Air Quality, Atmosphere and Health, 14. pp. 365-369.

Nylen, Julian, and Sheehan, Madoc (2021) The impact of moisture on lead concentrate powder dust emissions in ship-loading operations. Powder Technology, 394. pp. 353-362.

Nguyen, Quang Khai, Jung, Kwang Hyo, Lee, Gang Nam, Suh, Sung Bu, and To, Peter (2020) Experimental study on pressure distribution and flow coefficient of globe valve. Processes, 8 (7). 875.

Neupane, Rabindra, and Datta, Bithin (2020) Groundwater flow and multi-component reactive transport simulation of acid mine drainage at a former mine site. International Journal of Geomate, 19 (76). pp. 188-196.

Niu, Hong, Lei, Xia, Xiao, Yue, Li, You, and Xiang, Wei (2020) Performance analysis and optimization of secure generalized spatial modulation. IEEE Transactions on Communications, 68 (7). pp. 4451-4460.

Navaratnam, S., Henderson, D., and Ginger, J. (2020) Wind load sharing and influence coefficients for house roof structures. In: Lecture Notes in Civil Engineering (37) pp. 1097-1104. From: ACMSM25: 25th Australasian Conference on Mechanics of Structures and Materials, 4-7 December 2018, Brisbane, Qld, Australia.

Niroshan, Naguleswaran, Yin, Ling, Sivakugan, Nagaratnam, and Veenstra, Ryan Llewellyn (2018) Relevance of SEM to long-term mechanical properties of cemented paste backfill. Geotechnical and Geological Engineering, 36 (4). pp. 2171-2187.

Niroshan, Naguleswaran, Sivakugan, Nagaratnam, and Veenstra, Ryan Llewellyn (2018) Flow characteristics of cemented paste backfill. Geotechnical and Geological Engineering, 36 (4). pp. 2261-2272.

Niroshan, Naguleswaran, Sivakugan, Nagaratnam, and Veenstra, Ryan Llewellyn (2017) Laboratory study on strength development in cemented paste backfills. Journal of Materials in Civil Engineering, 29 (7). pp. 1-11.

Nelson, P.N., Webb, M.J., Banabas, M., Nake, S., Goodrick, I., Gordon, J., O'Grady, D., and Dubos, B. (2014) Methods to account for tree-scale variability in soil- and plant-related parameters in oil palm plantations. Plant and Soil, 374 (1-2). pp. 459-471.

Navaratna, Dimuth, and Jegatheesan, Veeriah (2011) Implications of short and long term critical flux experiments for laboratory-scale MBR operations. Bioresource Technology, 102 (9). pp. 5361-5369.

Neilly, A., Jegatheesan, V., and Shu, L. (2009) Evaluating the potential for zero discharge from reverse osmosis desalination using integrated processes – a review. Desalination and Water Treatment, 11. pp. 58-65.

Nateghi, M, Patterson, J., and Armfield, S.W. (2007) Stratified natural convection flow in rectangular open cavities. ANZIAM Journal, 48. pp. 542-557.

Ng, Wai K., Jegatheesan, Veeriah, and Lee, Seung-Hwan (2006) Influence of particle concentration on initial collection efficiency and surface coverage in porous media filtration. Korean Journal of Chemical Engineering, 23 (2). pp. 333-342.

Nam, Nguyen Hoai, Visvanathan, C., and Jegatheesan, V. (2006) Performance evaluation of septic tanks as onsite sanitation system. In: Proceedings of the Fourth International Symposium on Southeast Asian Water Environment. pp. 25-32. From: Fourth International Symposium on Southeast Asian Water Environment, 6-8 December 2006, Bangkok, Thailand.

Natividad Marin, Leynard (2019) Nutrient recovery from source separated urine: modelling and experimental study. PhD thesis, James Cook University.

Neilly, Adam Geoffrey (2014) Forward osmosis: the relationships between draw solution, membrane orientation and water flux. Masters (Research) thesis, James Cook University.

O

Okonkwo, Emenike George, Wheatley, Greg, and He, Yinghe (2021) The role of organic compounds in the recovery of valuable metals from primary and secondary sources: a mini-review. Resources, Conservation and Recycling, 174. 105813.

Olsen, Alex, Konovalov, Dmitry A., Philippa, Bronson, Ridd, Peter, Wood, Jake, Johns, Jamie, Banks, Wesley, Girgenti, Benjamin, Kenny, Owen, Whinney, James, Calvert, Brendan, Rahimi Azghadi, Mostafa, and White, Ronald D. (2019) DeepWeeds: a multiclass weed species image dataset for deep learning. Scientific Reports, 9. 2058.

Ostrikov, Kola, Macgregor-Ramiasa, Melanie N., Cavallaro, Alex A., Jacob, Mohan, and Vasilev, Krasimir (2016) A comparative assessment of nanoparticulate and metallic silver coated dressings. Recent Patents on Materials Science, 9 (1). pp. 50-57.

Ouyang, Bo, Jacob, Mohan V., and Rawat, R.S. (2015) Free standing 3D graphene nano-mesh synthesis by RF plasma CVD using non-synthetic precursor. Materials Research Bulletin, 71. pp. 61-66.

Osborn, Eric Peter (2016) Characteristic wind actions on large flat roofed porous canopies. Masters (Research) thesis, James Cook University.

P

Peng, Da, Khatamifar, Mehdi, and Lin, Wenxian (2022) Experimental and numerical studies of the orientation effect on the natural convection heat dissipation of composite polymer heat sinks. Journal of Enhanced Heat Transfer, 29 (6). pp. 1-26.

Parackal, Korah I., Ginger, John D., and Eaton, Joshua (2022) Wind loads on double-skillion roof houses. Australian Journal of Structural Engineering, 23 (1). pp. 26-36.

Putra, Dewandra Bagus Eka, Hadian, Mohamad Sapari Dwi, Alam, Boy Yoseph C.S.S.Syah, Yuskar, Yuniarti, Yaacob, Wan Zuhairi Wan, Datta, Bithin, and Harnum, Widya Puspa Dwi (2021) Geochemistry of groundwater and saltwater intrusion in a coastal region of an island in Malacca Strait, Indonesia. Environmental Engineering Research, 26 (2). 200006.

Porter, Hannah, Mukherjee, Abhijit, Tuladhar, Rabin, and Dhami, Navdeep Kaur (2021) Life cycle assessment of biocement: An emerging sustainable solution? Sustainability, 13 (24). 13878.

Pacheco-Torgal, Fernando, Ding, Yining, Colangelo, Francesco, Tuladhar, Rabin, and Koutamanis, Alexander (2020) Advances in Construction and Demolition Waste Recycling: management, processing and environmental assessment. Woodhead Publishing, Cambridge, UK.

Powell, L., Lim, H.S., Brown, I., Huang, T., Munksgaard, N., Randall, M, Holdsworth, J., and Cook, H. (2020) Innovation through collaboration: improving urban water management for a reef council. Water e-journal, 5 (3).

Pacheco-Torgal, Fernando, Khatib, Jamal, Colangelo, Francesco, and Tuladhar, Rabin (2018) Use of Recycled Plastics in Eco-efficient Concrete. Woodhead Publishing, Duxford, UK.

Palma, H., Killoran, E., Sheehan, M., Berner, F., and Heimann, K. (2017) Assessment of microalga biofilms for simultaneous remediation and biofuel generation in mine tailings water. Bioresource Technology, 234. pp. 327-335.

Peng, Yuexing, Wang, Peng, Xiang, Wei, and Li, Yonghui (2017) Secret key generation based on estimated channel state information for TDD-OFDM systems over fading channels. IEEE Transactions on Wireless Communications, 16 (8). pp. 5176-5186.

Philippa, Bronson, White, Ron, and Pivrikas, Almantas (2016) A route to high gain photodetectors through suppressed recombination in disordered films. Applied Physics Letters, 109 (15). 153301. pp. 1-4.

Pivrikas, Almantas, Philippa, Bronson, White, Ronald D., and Juska, Gytis (2016) Photocarrier lifetime and recombination losses in photovoltaic systems. Nature Photonics, 10. pp. 282-283.

Patra, C.R., Sivakugan, N., and Das, B.M. (2016) Recent developments on bearing capacity of strip foundation on granular soil under eccentrically inclined load. International Journal of Geotechnical Engineering, 10 (1). pp. 31-39.

Pivrikas, Almantas, Philippa, Bronson, White, Ronald D., and Juška, Gytis (2016) Reply to 'Revisiting photocarrier lifetimes in photovoltaics'. Nature Photonics, 10 (9). p. 563.

Peacock, Patrick, and Holmes, David (2014) Comparison and development of equation of state laws in smoothed particle hydrodynamics. Applied Mechanics and Materials, 553. pp. 144-149.

Peacock, P.H., and Holmes, D.W. (2014) Modified equation of state laws for heat transfer and natural convection in smoothed particle hydrodynamics. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. 90. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Peacock, Patrick H., and Holmes, David W. (2013) Development and verification of a particle number density variant of sph to robustly incorporate energy and heat transfer. In: Proceedings of the Third International Conference on Particle-Based Methods: fundamentals and applications. pp. 1-12. From: Particles 2013: Third International Conference on Particle-Based Methods: fundamentals and applications, 18-20 September 2013, Stuttgart, Germany.

Prakash, Om, and Datta, Bithin (2013) Sequential optimal monitoring network design and iterative spatial estimation of pollutant concentration for identification of unknown groundwater pollution source locations. Environmental Monitoring and Assessment, 185 (7). pp. 5611-5626.

Patra, C.R., Behera, R.N., Sivakugan, N., and Das, B.M. (2013) Estimation of average settlement of shallow strip foundation on granular soil under eccentric loading. International Journal of Geotechnical Engineering, 7 (2). pp. 218-222.

Peng, Zhongxiao, Wang, Meiling, and Yin, Ling (2012) Investigation of nano-mechanical properties of cartilages of sheep knee joints. In: Proceedings of the 7th Australasian Congress on Applied Mechanics. pp. 315-321. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Patra, C.R, Behera, R.N., Sivakugan, N., and Das, B.M. (2012) Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load, Part II. International Journal of Geotechnical Engineering, 6 (4). pp. 507-514.

Patra, C.R, Behara, R.N., Sivakugan, N., and Das, B.M. (2012) Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load, Part I. International Journal of Geotechnical Engineering, 6 (3). pp. 343-352.

Patra, C.R., Sivakugan, N., Das, B.M., and Atalar, C. (2011) Maximum relative density of clean sand as a function of median grain size and compaction energy. In: Proceedings of the 15th European Conference on Soil Mechanics and Geotechnical Engineering - Geotechnics of Hard Soils – Weak Rocks. pp. 1185-1190. From: 15th European Conference on Soil Mechanics and Geotechnical Engineering, 12 -15 September 2011, Athens, Greece.

Peng, Jianhui, Song, Xiao-Fei, and Yin, Ling (2011) Forecasting of cutting forces in dental adjustment of ceramic prostheses using an artificial neural network. Advanced Materials Research, 152-153. pp. 1687-1690.

Patra, C.R., Sivakugan, N., Das, B.M., and Rout, S.K. (2010) Correlations for relative density of clean sand with median grain size and compaction energy. International Journal of Geotechnical Engineering, 4 (2). pp. 195-203.

Patra, C.R., Sivakugan, N., and Das, B.M. (2010) Relative density and median grain-size correlation from laboratory compaction tests on granular soil. International Journal of Geotechnical Engineering, 4 (1). pp. 55-62.

Patterson, John C., Lei, Chengwang, Armfield, Steve W., and Lin, Wenxian (2009) Scaling of unsteady natural convection boundary layers with a non-instantaneous initiation. International Journal of Thermal Sciences, 48 (10). pp. 1843-1852.

Peng, Zhongxiao, Fasiolo, Mark, and Hart, Kane (2009) Investigation into changes in collagen structure of articular cartilage and wear particles of knee joints for osteoarthritic wear assessment. Journal of Musculoskeletal Research, 12 (3). pp. 143-152.

Promraksa, Arwut, Flood, Adrian E., and Schneider, Phil (2009) Measurement and analysis of the dextran partition coefficient in sucrose crystallization. Journal of Crystal Growth, 311 (14). pp. 3667-3673.

Pacheco, M., Sivakugan, N., and Barbosa, M.C. (2009) Statistical assessment of unidirectional propagation of a leachate contaminant plume. Geotechnical and Geological Engineering, 27 (1). pp. 123-135.

Peng, S.Z., and Sun, H.M. (2009) Accurate and efficient prediction of acoustical performance of noise barriers against transport noise pollution. International Journal of Vehicle Noise and Vibration, 5 (1-2). pp. 53-90.

Peng, Shuzhi, Cheng, Li, Huang, Lixi, Peng, Zhongxiao, and Li, Li (2009) Advanced acoustical wave propagator technique for acoustic-structure interaction in a duct structure with/without membrane. In: Proceedings of the 16th International Congress on Sound and Vibration. pp. 4324-4331. From: 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland.

Pandey, G.R., Mutsuyoshi, H., and Tuladhar, R. (2008) Seismic retrofitting of reinforced concrete bridge frames using external bonded FRP sheets. In: Proceedings of the 14th World Conference on Earthquake Engineering (11) 11-0092. pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.

Peng, Zhongxiao, and Tomovich, Steven (2008) The development of a new image acquisition and analysis system for 3D surface measurements using confocal laser scanning microscopy. Advanced Materials Research, 32. pp. 173-179.

Pirapakaran, Kandiah, and Sivakugan, Nagaratnam (2007) A laboratory model to study arching within a hydraulic fill stope. Geotechnical Testing Journal, 30 (6). pp. 496-503.

Pamu, D., Narayana Rao, G.L., Raju, K.C. James, and Jacob, Mohan V. (2007) Effect of CuO on the sintering and cryogenic microwave characteristics of (Zr 0.8 Sn 0.2) TiO4 ceramics. Science and Technology of Advanced Materials, 8 (6). pp. 469-476.

Peng, Z. (2007) Osteoarthritis diagnosis using wear particle analysis technique: Investigation of correlation between particle and cartilage surface in walking process. Wear, 262 (5-6). pp. 630-640.

Pirapakaran, Kandiah, and Sivakugan, Nagaratnam (2007) Arching within hydraulic fill stopes. Geotechnical and Geological Engineering, 25 (1). pp. 25-35.

Pirapakaran, K., Singh, S., and Sivakugan, N. (2007) Hydraulic fill research at James Cook University in the new millennium. In: Proceedings of Minefill 2007. pp. 1-8. From: 9th International Symposium on Mining with Backfill: Innovation and Experience, 29 Apr-2 May 2007, Montreal, Quebec, Canada.

Pirapakaran, Kandiah, Sivakugan, Nagaratnam, and Rankine, Rudd (2007) Investigations into strength of Cannington paste fill mixed with blended cements. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (2) pp. 144-149. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Pandey, G.R., Mutsuyoshi, H., and Aravinthan, T. (2007) Retrofitting reinforced concrete bridge frames using externally bonded FRP sheets. In: Proceedings of the First Asia Pacific Conference on FRP in Structures (1) pp. 79-86. From: Asia-Pacific Conference on FRP in Structures, 12-14 December 2007, Hong Kong, China.

Pirapakaran, K., and Sivakugan, N. (2006) Numerical and experimental studies of arching effects within mine fill slopes. In: Proceedings of the Sixth International Conference on Physical Modelling in Geotechnics (2) pp. 1519-1525. From: 6th International Conference on Physical Modelling in Geotechnics, 4-6 August 2006, Hong Kong.

Piel, H., Aminov, B., Aminova, F., Cao, B., Getta, M., Kolesov, S., Knack, A., Mazierska, J., Pupeter, N., Bin, Wei, Wehler, D., and Xiaoping, Zhang (2006) A cryogenic front end for CDMA and UMTS wireless base stations. Journal of Physics: conference series, 43. pp. 1354-1357.

Porter, Adam, Jegatheesan, Veeriah, and Narayan, Kumar (2005) Pumping optimisation of the lower Burdekin delta aquifer using an analytical model of seawater intrusion. In: Papers from the Ozwater Specialist Conference. pp. 1-8. From: Ozwater Specialist Conference, 5 - 7 May, 2005, Townsville, QLD, Australia.

Peng, Z., Kessissoglou, N.J., and Cox, M. (2005) A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 258 (11-12). pp. 1651-1662.

Peng, Z., Green, A., and Yuan, C. (2005) The study of wear in a spur gear using wear debris and vibration analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials. pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Pennisi, S. N., Liow, J.-L., and Schneider, P. A. (2004) CFD model development for a final effect evaporator. In: Proceedings of the Australian Society of Sugar Cane Technologists 2004 - Twenty-sixth Conference Brisbane 2004 (26) From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Piel, H., Aminov, B., Chaloupka, H., Getta, M., Kolesov, S., Wehler, D., Mazierska, J., Sinclair, M., Knack, A., and Jacob, M.V. (2004) High temperature superconducting elliptic filters for UMTS Cryogenic Receiver. In: Proceedings of Asia Pacific Microwave Conference 2004. pp. 1-4. From: Asia Pacific Microwave Conference, 15 - 18 December 2004, New Delhi, India.

Pennisi, Steven N., Liow, Jong-Leng, and Schneider, Philip A. (2003) CFD model development for sugar mill evaporators. In: Proceedings of the 3rd International Conference on CFD in the Minerals and Process Industries. pp. 105-110. From: 3rd International Conference on CFD in the Minerals and Process Industries, 10-12 December 2003, Melbourne, VIC, Australia.

Phan, Cu, Holgate, Daniel L., and Griffin, Gregory J. (2003) Determination of the Nusselt versus Graetz correlation for heat transfer in channels of sinusoidal cross-section. Korean Journal of Chemical Engineering, 20 (6). pp. 1012-1016.

Peng, Z., and Kessissoglou, N. (2003) Integration of wear debris and vibration analysis for machine condition monitoring. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 23-30. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Thetford, A. (2003) The development of an expert system to monitor the condition of gearboxes using wear debris analysis techniques. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 182-189. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Kessissoglou, N. (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear, 255 (7-12). pp. 1221-1232.

Poletto, Andrew, Jegatheesan, Veeriah, and Wulf, Chris (2003) The water management in Bohle quarry. In: Papers from OzWater, AWA 20th Convention. pp. 1-12. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Patterson, John C., Graham, Tasman, Schopf, Wolfgang, and Armfield, S.W. (2002) Boundary layer development on a semi infinite, suddenly heated vertical plate. Journal of Fluid Mechanics, 453. pp. 39-55.

Peng, Z., and Kessissoglou, N.J. (2002) The correlation of wear debris analysis with vibrations analysis of a worm gear. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 255-261. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Zhongxiao (2002) An integrated intelligence system for wear debris analysis. Wear, 252 (9-10). pp. 730-743.

Peng, Z., and Tomovich, S.J. (2002) The study of wear particles generated from industrial machines. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 423-428. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Z., and Goodwin, S. (2001) Wear-debris analysis in expert systems. Tribology Letters, 11 (3-4). pp. 177-184.

Peterson, Eric L., Wadhwa, Lal C., and Harris, Jonathan A. (2001) Arrangement of aerators in an intensive shrimp growout pond having a rectangular shape. Aquacultural Engineering, 25 (1). pp. 51-65.

Patterson, J. C. (2001) Experiments on natural convection boundary layers - the role of instabilities. In: Proceedings of the 14th Australasian Fluid Mechanics Conference. pp. 87-94. From: 14th Australasian Fluid Mechanics Conference, 9-14 December 2001, Adelaide University, Adelaide.

Peterson, Eric L., Harris, Jonathan A., and Wadhwa, Lal C. (2000) CFD modelling pond dynamic processes. Aquacultural Engineering, 23 (1-3). pp. 61-93.

Peterson, Eric L. (2000) Observations of pond hydrodynamics. Aquacultural Engineering, 21 (4). pp. 247-269.

Pennisi, Steve (2004) Development of a more energy efficient Roberts evaporator based on CFD modelling. PhD thesis, James Cook University.

Q

Quinn, Wade, Jegatheesan, Veeriah, Millard, Lindsay, Wheeler, Lauren, and Kauppila, David (2005) Hydraulic modelling of gross pollutant traps for North Queensland conditions. In: Papers from the Ozwater Specialist Conference. pp. 1-8. From: Ozwater Specialist Conference, 5 - 7 May, 2005, Townsville, QLD, Australia.

R

Romo-Rico, Jesus, Krishna, Smriti Murali, Golledge, Jonathan, Hayles, Andrew, Vasilev, Krasimir, and Jacob, Mohan V. (2022) Plasma polymers from oregano secondary metabolites: Antibacterial and biocompatible plant-based polymers. Plasma Processes and Polymers, 19 (7). 2100220.

Rahmani, Kaveh, Nouri, Alireza, Wheatley, Greg, Malekmohammadi, Hossein, Bakhtiari, Hamed, and Yazdi, Vahid (2021) Determination of tensile behavior of hot-pressed Mg-TiO2 and Mg-ZrO2 nanocomposites using indentation test and a holistic inverse modeling technique. Journal of Materials Research and Technology, 14. pp. 2107-2114.

Roy, Dilip Kumar, Biswas, Sujit Kumar, Mattar, Mohamed A., El-Shafei, Ahmed A., Murad, Khandakar Faisal Ibn, Saha, Kowshik Kumar, Datta, Bithin, and Dewidar, Ahmed Z. (2021) Groundwater level prediction using a multiple objective genetic algorithm-grey relational analysis based weighted ensemble of anfis models. Water, 13 (21). 3130.

Roy, Dilip Kumar, Lal, Alvin, Sarker, Khokan Kumer, Saha, Kowshik Kumar, and Datta, Bithin (2021) Optimization algorithms as training approaches for prediction of reference evapotranspiration using adaptive neuro fuzzy inference system. Agricultural Water Management, 255. 107003.

Rahmani, Kaveh, Wheatley, Greg, Sadooghi, Ali, Jalal Hashemi, Seyed, and Babazadeh, Jafar (2021) The experimental analysis of creep and corrosion properties of polymeric tube reinforced by glass, carbon and Kevlar fibers. Materials Research Express, 8 (6). 065307.

Rahmani, Kaveh, Wheatley, Greg, Sadooghi, Ali, Hashemi, Seyed Jalal, and Babazadeh, Jafar (2021) The experimental investigation of hardness and wear behaviors of inner surface of the resin tubes reinforced by fibers. Results in Engineering, 11. 100273.

Rahimi Azghadi, Mostafa, Chen, Ying-Chen, Eshraghian, Jason K., Chen, Jia, Lin, Chih-Yang, Amirsoleimani, Amirali, Mehonic, Adnan, Kenyon, Anthony J., Fowler, Burt, Lee, Jack C., and Chang, Yao-Feng (2020) CMOS and memristive hardware for neuromorphic computing. Advanced Intelligent Systems, 2 (5). 1900189.

Rahimi Azghadi, Mostafa, Chen, Ying-Chen, Eshraghian, Jason K., Chen, Jia, Lin, Chih-Yang, Amirsoleimani, Amirali, Mehonic, Adnan, Kenyon, Anthony J., Fowler, Burt, Lee, Jack C., and Chang, Yao-Feng (2020) Complementary metal‐oxide semiconductor and memristive hardware for neuromorphic computing. Advanced Intelligent Systems, 2 (5). 1900189.

Rahimi Azghadi, Mostafa, Lammie, Corey, Eshraghian, Jason K., Payvand, Melika, Donati, Elisa, Linares-Barranco, Bernabe, and Indiveri, Giacomo (2020) Hardware implementation of deep network accelerators towards healthcare and biomedical applications. IEEE Transactions on Biomedical Circuits and Systems, 14 (6). pp. 1138-1159.

Roy, Dilip Kumar, and Datta, Bithin (2020) Modelling and management of saltwater intrusion in a coastal aquifer system: a regional-scale study. Groundwater for Sustainable Development, 11. 100479.

Roy, Dilip Kumar, and Datta, B. (2020) Saltwater intrusion prediction in coastal aquifers utilizing a weighted-average heterogeneous ensemble of prediction models based on Dempster-Shafer theory of evidence. Hydrological Sciences Journal, 65 (9). pp. 1555-1567.

Roy, Dilip Kumar, and Datta, Bithin (2020) Solution of large-scale multi-objective optimization models for saltwater intrusion control in coastal aquifers utilizing ANFIS based linked meta-models for computational feasibility and efficiency. In: Springer Proceedings in Mathematics and Statistics (302) pp. 163-171. From: ICMAAM 2018: International Conference on Mathematical Analysisand Applications in Modeling, 9-12 January 2018, Kolkata, India.

Roy, Dilip Kumar, and Datta, Bithin (2019) Adaptive management of coastal aquifers using entropy-set pair analysis-based three-dimensional sequential monitoring network design. Journal of Hydrologic Engineering, 24 (3). 04018072.

Rohde, Barukh B., Staunton, Kyran M., Zeak, Nicholas C., Beebe, Nigel, Snoad, Nigel, Bondarenco, Artiom, Liddington, Catherine, Anderson, Jason A., Xiang, Wei, Mankin, Richard W., and Ritchie, Scott A. (2019) Waterproof, low-cost, long-battery-life sound trap for surveillance of male Aedes aegypti for rear-and-release mosquito control programmes. Parasites & Vectors, 12. 417.

Roy, Dilip Kumar, and Datta, Bithin (2019) An ensemble meta-modelling approach using the Dempster-Shafer theory of evidence for developing saltwater intrusion management strategies in coastal aquifers. Water Resources Management, 33 (2). pp. 775-795.

Roy, Dilip Kumar, and Datta, Bithin (2018) Comparative efficiency of different artificial intelligence based models for predicting density dependent saltwater intrusion processes in coastal aquifers and saltwater intrusion management utilizing the best performing model. Desalination and Water Treatment, 105. pp. 160-180.

Rana, Md Masud, Li, Li, Su, Steven W., and Xiang, Wei (2018) Consensus-based smart grid state estimation algorithm. IEEE Transactions on Industrial Informatics, 14 (8). pp. 3368-3375.

Rana, M.M., Xiang, W., and Choi, Bong Jun (2018) Distributed state estimation for smart grids considering packet dropouts. In: Proceedings of the 15th International Conference on Control, Automation, Robotics and Vision. pp. 2009-2013. From: ICARCV 2018: 15th International Conference on Control, Automation, Robotics and Vision, 18-21 November 2018, Singapore.

Rana, M.M., Xiang, W., and Choi, Bong Jun (2018) Grid state estimation over unreliable channel using IoT networks. In: Proceedings of the 15th International Conference on Control, Automation, Robotics and Vision. pp. 945-948. From: ICARCV 2018: 15th International Conference on Control, Automation, Robotics and Vision, 18-21 November 2018, Singapore.

Roy, Dilip Kumar, and Datta, Bithin (2018) Influence of sea level rise on multiobjective management of saltwater intrusion in coastal aquifers. Journal of Hydrologic Engineering, 23 (8).

Rana, Md M., Xiang, Wei, Wang, Eric, Li, Xuehua, and Choi, Bong Jun (2018) Internet of Things infrastructure for wireless power transfer systems. IEEE Access, 6. pp. 19295-19303.

Rana, Md M., and Xiang, Wei (2018) IoT communications network for wireless power transfer system state estimation and stabilization. IEEE Internet of Things Journal, 5 (5). pp. 4142-4150.

Rana, Md M., Xiang, Wei, and Wang, Eric (2018) IoT-based state estimation for microgrids. IEEE Internet of Things Journal, 5 (2). pp. 1345-1346.

Rana, Md M., Xiang, Wei, Wang, Eric, and Li, Xuehua (2018) Monitoring the smart grid incorporating turbines and vehicles. IEEE Access, 6. pp. 45485-45492.

Rana, Md M., Xiang, Wei, and Li, Xuehua (2018) Position and velocity estimations of mobile device incorporate GNSS. IEEE Access, 6. pp. 31141-31147.

Roy, Dilip Kumar, and Datta, Bithin (2018) Reliability based management of coastal aquifers using heterogeneous ensemble of meta-models. In: Proceedings of the IEEE Conference on Technologies for Sustainability (1) From: SusTech 2018: 6th IEEE Conference on Technologies for Sustainability, 11-13 November 2018, Long Beach, CA, USA.

Roy, Dilip Kumar, and Datta, Bithin (2018) Selection of meta-models to predict saltwater intrusion in coastal aquifers using entropy weight based decision theory. In: Proceedings of the IEEE Conference on Technologies for Sustainability. From: SusTech 2018: 6th IEEE Conference on Technologies for Sustainability, 11-13 November 2018, Long Beach, CA, USA.

Rana, Md M., Xiang, Wei, and Wang, Erric (2018) Smart grid state estimation and stabilisation. International Journal of Electrical Power and Energy Systems, 102. pp. 152-159.

Roy, Dilip Kumar, and Datta, Bithin (2018) Trained meta-models and evolutionary algorithm based multi-objective management of coastal aquifers under parameter uncertainty. Journal of Hydroinformatics, 20 (6). pp. 1247-1267.

Rana, M.M., Xiang, W., and Choi, Bong Jun (2018) Wind turbine state-space model, state estimation and stabilisation algorithms. In: Proceedings of the 15th International Conference on Control, Automation, Robotics and Vision. pp. 1235-1240. From: ICARCV 2018: 15th International Conference on Control, Automation, Robotics and Vision, 18-21 November 2018, Singapore.

Roy, Dilip Kumar, and Datta, Bithin (2018) A review of surrogate models and their ensembles to develop saltwater intrusion management strategies in coastal aquifers. Earth Systems and Environment, 2 (2). pp. 193-211.

Ronan, Karly, and Kannan, M. Bobby (2017) Novel sustainable route for synthesis of hydroxyapatite biomaterial from biowastes. ACS Sustainable Chemistry and Engineering, 5 (3). pp. 2237-2245.

Roy, Dilip Kumar, and Datta, Bithin (2017) Fuzzy c-mean clustering based inference system for saltwater intrusion processes prediction in coastal aquifers. Water Resources Management, 31 (1). pp. 355-376.

Roy, Dilip Kumar, and Datta, Bithin (2017) Genetic algorithm tuned fuzzy inference system to evolve optimal groundwater extraction strategies to control saltwater intrusion in multi-layered coastal aquifers under parameter uncertainty. Modeling Earth Systems and Environment, 3 (4). pp. 1707-1725.

Rana, Md Masud, Xiang, Wei, Wang, Eric, and Jia, Min (2017) IoT infrastructure and potential application to smart grid communications. In: Proceedings of the IEEE Global Communications Conference. From: GLOBECOM 2017: IEEE Global Communications Conference, 4-8 December 2017, Singapore.

Rezaeipour, Roshanak, and Zahedi, Ahmad (2017) Multi-objective based economic operation and environmental performance of PV-based large industrial consumer. Solar Energy, 157. pp. 227-235.

Roy, Dilip Kumar, and Datta, Bithin (2017) Multivariate adaptive regression spline ensembles for management of multilayered coastal aquifers. Journal of Hydrologic Engineering, 22 (9).

Roy, Dilip Kumar, and Datta, Bithin (2017) Optimal management of groundwater extraction to control saltwater intrusion in multi-layered coastal aquifers using ensembles of adaptive neuro-fuzzy inference system. In: Proceedings of the World Environmental and Water Resources Congress 2017. pp. 139-150. From: World Environmental and Water Resources Congress 2017: bearing knowledge for sustainability, 21-25 May 2017, Sacramento, CA, USA.

Ritchie, Chris, Vamvounis, George, Soleimaninejad, Hamid, Smith, Trevor, Bieske, Evan J., and Dryza, Viktoras (2017) Photochrome-doped organic films for photonic key-pad locks and multi-state fluorescence. Physical Chemistry Chemical Physics. pp. 1-9.

Roy, Dilip Kumar, and Datta, Bithin (2017) Saltwater intrusion processes in coastal aquifers - modelling and management: a review. Desalination and Water Treatment, 78. pp. 57-89.

Rahimiazghadi, Mostafa, Linares-Barranco, Bernabe, Abbott, Derek, and Leong, Philip (2017) A hybrid CMOS-memristor neuromorphic synapse. IEEE Transactions on Biomedical Circuits and Systems, 11 (2). pp. 434-444.

Roy, Dilip Kumar, and Datta, Bithin (2017) A surrogate based multi-objective management model to control saltwater intrusion in multi-layered coastal aquifer systems. Civil Engineering and Environmental Systems, 34 (3-4). pp. 238-263.

Rajeev, P., Sumanasekera, P.R., and Sivakugan, N. (2016) Lateral variation of the vertical stress in underground mine stopes filled with granular backfills. Geotechnical and Geological Engineering, 34 (2). pp. 481-492.

Rajeev, P., Sumanasekera, P.R., and Sivakugan, N. (2016) Average vertical stresses in underground mine stopes filled with granular backfills. Geotechnical and Geological Engineering, 34 (6). pp. 2053-2061.

Rajeev, P., Bui, H., and Sivakugan, N. (2014) Seismic earth pressure development in sheet pile retaining walls: a numerical study. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2011) Emergent BCM via neuromorphic VLSI synapses with STDP. In: Australian Workshop on Computational Neuroscience. p. 31. From: 5th Australian Workshop on Computational Neuroscience, 13-14 December 2011, University of Western Sydney, Campbelltown, NSW.

Reid, Geoffrey D., and Kikkert, Cornelis J. (2009) Modelling power transformers to determine the effect of PVC Inverter Spurii on the distribution network. In: Proceedings of Solar09, the 47th Annual Conference of ANZSES2009. pp. 1-5. From: Solar09, the 47th Annual Conference of ANZSES2009, 29th September - 2nd October, 2009, Townsville, QLD, Australia.

Rankine, B.R., Indraratna, B., Sivakugan, N., Wijeyakulasuriya, V., and Rujikiatkaumjorn, C. (2008) Foundation behaviour below an embankment on soft soils. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 161 (5). pp. 259-267.

Reid, Geoffrey D., and Kikkert, Cornelis J. (2008) Radiation from a single wire earth return power line. In: Proceedings of the Inaugural Symposium on Electrical Energy Evolution in China and Australia. pp. 1-4. From: Inaugural Symposium on Electrical Energy Evolution in China and Australia, 28-30 July 2008, Palm Cove, QLD, Australia.

Rankine, Rudd M., and Sivakugan, Nagaratnam (2007) Geotechnical properties of cemented paste backfill from Cannington Mine, Australia. Geotechnical and Geological Engineering, 25 (4). pp. 383-393.

Rankine, R., Pacheco, M., and Sivakugan, N. (2007) Underground mining with backfills. Soils and Rocks, 30 (2). pp. 93-101.

Rankine, Kelda, Sivakugan, Siva, and Rankine, Kirralee (2007) Drainage behaviour of three-dimensional hydraulic fill stopes: a sensitivity analysis. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (1) pp. 220-225. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Rankine, Briony, and Sivakugan, Nagaratnam (2007) Short term lateral deformations induced in an elastic medium through the application of rigid embankment loading. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (1) pp. 214-219. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Racek, O., Berndt, Christopher C., Guru, D.N., and Heberlein, J. (2006) Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques. Surface & Coatings Technology, 201 (1). pp. 338-346.

Rankine, K.J., Sivakugan, N., and Cowling, R. (2006) Emplaced geotechnical characteristics of hydraulic fills in a number of Australian mines. Geotechnical and Geological Engineering, 24 (1). pp. 1-14.

Rankine, K. S., and Sivakugan, N. (2005) A 2D numerical study of the effects of anistropy, ancillary drainage and geometry on flow through hydraulic fill mine stopes. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2) pp. 955-958. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Rahman, Mohammad M. , He, Yinghe, and Davies, Nigel M. (2005) Application of laminar jet break-up to the preparation of monodisperse microparticulate drug delivery systems. In: Proceedings of 33rd Australasian Chemical Engineering Conference. From: Chemeca 2005, 25-28 September 2005, Brisbane, QLD, Australia.

Rankine, Kirralee J., and Sivakugan, Nagaratnam (2005) Drainage characteristics and behaviour of hydraulically placed mine fill and fill barricades. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2) pp. 579-582. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Rankine, B., Sivakugan, N., and Wijeyakulasuriya, V. (2005) Observed and predicted behaviour of clay foundation response under the Sunshine Motorway trial embankment. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2) pp. 951-954. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Rankine, Rudd M., and Sivakugan, Nagaratnam (2005) Prediction of paste backfill performance using artificial neural networks. In: Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering (2) pp. 1107-1110. From: 16th International Conference on Soil Mechanics and Geotechnical Engineering, 12 - 16 September 2005, Osaka, Japan.

Rankine, B.R., Sivakugan, N., and Messer, T.R. (2004) Anisotropy of consolidation parameters in artifically sedimented clays. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics (2) pp. 717-723. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Rankine, R., and Sivakugan, N. (2004) Backfilling of underground mines with paste. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics. pp. 225-231. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Rankine, K.J., Sivakugan, N., and Rankine, K.S. (2004) Laboratory tests for mine fills and barricade bricks. In: Proceedings of the 9th Australia New Zealand Conference on Geomechanics (1) pp. 218-224. From: To the eNZ of the Earth, 8-11 February 2004, Auckland, New Zealand.

Rankine, K.J., Rankine, K.S., and Sivakugan, N. (2003) Three dimensional drainage modelling of hydraulic fill mines. In: Proceedings of 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering. pp. 937-940. From: 12th Asian Regional Conference on Soil Mechanics & Geotechnical Engineering, 4-8 August 2003, Singapore.

Rankine, K.J., Rankine, K.S., and Sivakugan, N. (2003) Quantitative validation of scaled modelling of hydraulic mine drainage using numerical modelling. In: Proceedings of the MODSIM 2003 International Congress on Modelling and Simulation. pp. 2054-2059. From: MODSIM 2003 International Congress on Modelling and Simulation, 14-17 July 2003, Townsville, QLD, Australia .

Rahimi Azghadi, S. Mostafa (2014) Neuromorphic VLSI designs for spike timing and rate-based synaptic plasticity with application in pattern classification. PhD thesis, The University of Adelaide.

Rankine, Briony Rachelle (2007) Assessment and analysis of Queensland clay behaviour. PhD thesis, James Cook University.

Rankine, Kelda S. (2007) Development of two and three-dimensional method of fragments to analyse drainage behaviour in hydraulic fill stopes. PhD thesis, James Cook University.

Rackemann, Darryn Wallace (2005) Evaluation of circulation and heat transfer in calandria tubes of crystallisation vacuum pans. Masters (Research) thesis, James Cook University.

Rankine, Kirralee Jo (2005) An investigation into the drainage characteristics and behaviour of hydraulically placed mine backfill and permeable minefill barricades. PhD thesis, James Cook University.

S

Saleh, Alzayat, Sheaves, Marcus, and Rahimi Azghadi, Mostafa (2022) Computer vision and deep learning for fish classification in underwater habitats: A survey. Fish and Fisheries. (In Press)

Sedighkia, Mahdi, and Abdoli, Asghar (2022) Design of optimal environmental flow regime at downstream of multireservoir systems by a coupled SWAT-reservoir operation optimization method. Environment, Development and Sustainability. (In Press)

Sanderson, Stephen, Vamvounis, George, Mark, Alan, Burn, Paul, White, Ronald, and Philippa, Bronson (2022) Understanding the performance differences between solution and vacuum deposited OLEDs: a computational approach. The Journal of Chemical Physics, 156 (21). 214703.

Sedighkia, Mahdi, and Abdoli, Asghar (2022) Balancing environmental impacts and economic benefits of agriculture under the climate change through an integrated optimization system. International Journal of Energy and Environmental Engineering, 13. pp. 1053-1066.

Shi, Jiawei, Shao, Hong, Yang, Feng, Li, Jing, Fan, Liyuan, and Cai, Weiwei (2022) Dual-template induced multi-scale porous Fe@FeNC oxygen reduction catalyst for high-performance electrochemical devices. Chemical Engineering Journal, 445. 136628.

Smith, Calvin, Hill, Blair, Wheatley, Greg, Masoudi Nejad, Reza, and Sina, Nima (2022) Fatigue reliability assessment of the new design of rear suspension system of the JCU motorsport car. Structures, 36. pp. 473-481.

Sedighkia, Mahdi, Datta, Bithin, and Fathi, Zeynab (2022) Linking ecohydraulic simulation and optimization system for mitigating economic and environmental losses of reservoirs. Aqua: water infrastructure, ecosystems and society, 71 (2). pp. 229-247.

Singh, Jagtar, Wheatley, Greg, Branco, Ricardo, Ventura Antunes, Fernando, Masoudi Nejad, Reza, and Berto, Filippo (2022) On the low-cycle fatigue behavior of aluminum alloys under influence of tensile pre-strain histories and strain ratio. International Journal of Fatigue, 158. 106747.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2022) Reducing impacts of rice fields nitrate contamination on the river ecosystem by a coupled SWAT reservoir operation optimization model. Arabian Journal of Geosciences, 15. 160.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2022) Reducing the conflict of interest in the optimal operation of reservoirs by linking mesohabitat hydraulic modeling and metaheuristic optimization. Water Supply, 22 (2). pp. 2269-2286.

Sedighkia, Mahdi, and Datta, Bithin (2022) Using evolutionary algorithms for continuous simulation of long-term reservoir inflows. Proceedings of the Institution of Civil Engineers: Water Management, 175 (2). pp. 67-77.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2022) Utilizing classic evolutionary algorithms to assess the Brown trout (Salmo trutta) habitats by ANFIS-based physical habitat model. Modeling Earth Systems and Environment, 8. pp. 857-869.

Santana, Marina F.M., Kroon, Frederieke J., van Herwerden, Lynne, Vamvounis, George, and Motti, Cherie A. (2022) An assessment workflow to recover microplastics from complex biological matrices. Marine Pollution Bulletin, 179. 113676.

Sheehan, M., Antunes, E., Seligmann, B., and Weight, C. (2022) The influence of moisture content on dust generation in falling curtains of sugarcane bagasse fiber. Powder Technology, 397. 117001.

Samadi, Farzaneh, Mourya, Jeetendra, Wheatley, Greg, Khan, Mohammed Nizam, Nejad, Reza Masoudi, Branco, Ricardo, and Macek, Wojciech (2022) An investigation on residual stress and fatigue life assessment of T-shape welded joints. Engineering Failure Analysis, 141. 106685.

Sedighkia, Mahdi, and Datta, Bithin (2022) A simulation-optimization system for evaluating flood management and environmental flow supply by reservoirs. Natural Hazards, 111. pp. 2855-2879.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2021) Design of optimal environmental flow regime at downstream of reservoirs using wetted perimeter-optimization method. Journal of Hydro-Environment Research, 39. pp. 1-14.

Shishir, Md Safiqur Rahaman, Jacob, Mohan, Leong, Kenneth, Cheng, Long, Cullen, Brendan, and Brodie, Graham (2021) Measurement and modelling of dielectric properties of different animal feed resources as a function of feed type and moisture content. Journal of Microwave Power and Electromagnetic Energy, 55 (4). pp. 273-286.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2021) Minimizing physical habitat impacts at downstream of diversion dams by a multiobjective optimization of environmental flow regime. Environmental Modelling & Software, 140. 105029.

Sedighkia, Mahdi, Abdoli, Asghar, and Datta, Bithin (2021) Optimizing monthly ecological flow regime by a coupled fuzzy physical habitat simulation–genetic algorithm method. Environment Systems and Decisions, 41 (3). pp. 425-436.

Sedighkia, Mahdi, Datta, Bithin, and Abdoli, Asghar (2021) Optimizing reservoir operation to avoid downstream physical habitat loss using coupled ANFIS- metaheuristic model. Earth Science Informatics, 14. pp. 2203-2220.

Steinemann, Anne, Nematollahi, Neda, Rismanchi, Behzad, Goodman, Nigel, and Kolev, Spas D. (2021) Pandemic products and volatile chemical emissions. Air Quality, Atmosphere and Health, 14. pp. 47-53.

Shi, Feng, Yin, Shi, Pham, Thong M., Tuladhar, Rabin, and Hao, Hong (2021) Pullout and flexural performance of silane groups and hydrophilic groups grafted polypropylene fibre reinforced UHPC. Construction and Building Materials, 277. 122335.

Sivakugan, Siva (2021) Soil Mechanics and Foundation Engineering. McGraw-Hill, New York, USA.

Siddique, Istiaq Jamil, Salema, Arshad Adam, Antunes, Elsa, and Vinu, Ravikrishnan (2021) Technical challenges in scaling up the microwave technology for biomass processing. Renewable and Sustainable Energy Reviews, 153. 111767.

Saggar, Siddhartha, Sanderson, Stephen, Gedefaw, Desta, Pan, Xun, Philippa, Bronson, Andersson, Mats R., Lo, Shih-Chun, and Namdas, Ebinazar B. (2021) Toward faster organic photodiodes: tuning of blend composition ratio. Advanced Functional Materials, 2021. 2010661.

Sanderson, Stephen, Vamvounis, George, Mark, Alan E., Burn, Paul L., White, Ronald D., and Philippa, Bronson W. (2021) Unraveling exciton processes in Ir(ppy)3:CBP OLED films upon photoexcitation. Journal of Chemical Physics, 154. 164101.

Saleh, Alzayat, Laradji, Issam H., Lammie, Corey, Vazquez, David, Flavell, Carol Ann, and Rahimi Azghadi, Mostafa (2021) A deep learning localization method for measuring abdominal muscle dimensions in ultrasound images. IEEE Journal of Biomedical and Health Informatics, 25. 10. pp. 3865-3873.

Sedighkia, Mahdi, Datta, Bithin, Abdoli, Asghar, and Moradian, Zahra (2021) An ecohydraulic-based expert system for optimal management of environmental flow at the downstream of reservoirs. Journal of Hydroinformatics, 23 (6). pp. 1343-1367.

Steinemann, Anne (2021) The fragranced products phenomenon: air quality and health, science and policy. Air Quality Atmosphere and Health, 14. pp. 235-243.

Staunton, Kyran M., Crawford, Jacob E., Liu, Jianyi, Townsend, Michael, Han, Yu, Desnoyer, Mark, Howell, Paul, Xiang, Wei, Burkot, Thomas R., Snoad, Nigel, and Ritchie, Scott A. (2021) A low-powered and highly selective trap for male Aedes (Diptera: Culicidae) surveillance: the male Aedes sound trap. Journal of Medical Entomology, 58 (1). pp. 408-415.

Stefanac, Nicole R., Zhou, Shou-Han, Spencer-Smith, Megan M., O'Connell, Redmond, Castles, Anne, and Bellgrove, Mark A. (2021) A neural index of inefficient evidence accumulation in dyslexia underlying slow perceptual decision making. Cortex, 142. pp. 122-137.

Sharan, Ashneel, Lal, Alvin, and Datta, Bithin (2021) A review of groundwater sustainability crisis in the Pacific Island countries: challenges and solutions. Journal of Hydrology, 603 (Part D).

Sahu, R., Patra, C. R., Sivakugan, N., and Das, B. M. (2020) Behavior of inclined loaded strip footings resting on geogrid-reinforced sand. Geotechnical and Geological Engineering, 38. pp. 5245-5256.

Satheeskumar, Navaratnam, Ginger, John, Humphreys, Mitchell, Henderson, David, Wang, Chi-Hsiang, Nguyen, Kate T.Q., and Mendis, Priyan (2020) Comparison of wind uplift load sharing for Australian truss- and pitch-framed roof structures. Journal of Wind Engineering and Industrial Aerodynamics, 204. 104246.

Steinemann, Anne, and Nematollahi, Neda (2020) Migraine headaches and fragranced consumer products: an international population-based study. Air Quality, Atmosphere and Health, 13 (4). pp. 387-390.

Sharma, Chakrabhavi Gundurao Dileep, Miller, Catherine, and Dos Santos Antunes, Elsa (2020) Modifications of novel zirconia surface and its effects on cellular interaction of human osteoblasts: an in vitro study. In: [Presented at the 98th General Session & Exhibition of the IADR/49th Annual Meeting & Exhibition of the AADR]. 2520. From: 98th General Session & Exhibition of the IADR/49th Annual Meeting & Exhibition of the AADR, 18-21 March 2020, Washington, D.C., USA.

Shi, Jun, Zheng, Jiabin, Liu, Xiaoping, Xiang, Wei, and Zhang, Qinyu (2020) Novel short-time fractional Fourier transform: theory, implementation, and applications. IEEE Transactions on Signal Processing, 68. pp. 3280-3295.

Sivakugan, Nagaratnam, Ameratunga, Jay, and Das, Braja M. (2020) Site characterisation for residential slabs and footings - Australian practice. International Journal of Geotechnical Engineering, 14 (2). pp. 130-133.

Shi, Shuo, Li, Yuchen, Gu, Shushi, Huang, Tao, and Gu, Xuemai (2020) Time allocation optimization and trajectory design in UAV-assisted energy and spectrum harvesting network. IEEE Access, 8. pp. 160537-160548.

Steinemann, Anne, Nematollahi, Neda, Weinberg, Justine Lew, Flattery, Jennifer, Goodman, Nigel, and Kolev, Spas D. (2020) Volatile chemical emissions from car air fresheners. Air Quality, Atmosphere and Health, 13. pp. 1329-1334.

Seligmann, Benjamin J., Zhao, Jiayi, Marmar, Sophia, Corbett, Tayla C., Small, Michael, Hassall, Maureen, and Boadle, Jesse T. (2019) Comparing capability of scenario hazard identification methods by the PIC (Plant-People-Procedure Interaction Contribution) network metric. Safety Science, 112. pp. 116-129.

Sanderson, Stephen, Philippa, Bronson, Vamvounis, George, Burn, Paul L., and White, Ronald D. (2019) Elucidating the effects of guest-host energy level alignment on charge transport in phosphorescent OLEDs. Applied Physics Letters, 115. 263301.

Steinemann, Anne, and Klaschka, Ursula (2019) Exposures and effects from fragranced consumer products in Germany. Air Quality, Atmosphere and Health, 12 (12). pp. 1399-1404.

Steinemann, Anne, and Goodman, Nigel (2019) Fragranced consumer products and effects on asthmatics: an international population-based study. Air Quality, Atmosphere and Health, 12 (6). pp. 643-649.

Sheehan, Madoc (2019) Scaffolding curricula in chemical engineering degree programs in order to develop student’s awareness of sustainability. In: Chemeca 2019: chemical engineering megatrends and the elements. 167. From: Chemeca 2019: chemical engineering megatrends and the elements, 29 September - 2 October 2019, Sydney, NSW, Australia.

Saadabadi, S. Ali, Thallam Thattai, Aditya, Fan, Liyuan, Lindeboom, Ralph E.F., Spanjers, Henri, Aravind, P.V., and UNSPECIFIED (2019) Solid oxide fuel cells fuelled with biogas: potential and constraints. Renewable Energy, 134. pp. 194-214.

Steinemann, Anne (2019) Ten questions concerning fragrance-free policies and indoor environments. Building and Environment, 159. 106054.

Sanderson, Stephen, Philippa, Bronson, Vamvounis, George, Burn, Paul L., and White, Ronald D. (2019) Understanding charge transport in Ir(ppy)₃:CBP OLED films. Journal of Chemical Physics, 150 (9). 094110.

Stokes, Peter W., Simonović, Ilija, Philippa, Bronson, Cocks, Daniel, Dujko, Sasa, and White, Ronald D. (2018) Third-order transport coefficients for localised and delocalised charged-particle transport. Scientific Reports, 8.

Singh, Sharanjit, Kumar, Ravinder, Setiabudi, Herma Dina, Nanda, Sonil, and N. Vo, Dai-Viet (2018) Advanced synthesis strategies of mesoporous SBA-15 supported catalysts for catalytic reforming applications: a state-of-the-art review. Applied Catalysis A: General, 559. pp. 57-74.

Shvartsman, Rina, Fan, Liyuan, and Trieu, Van-Hau (2018) Encouraging engineering students' participation in face-to-face peer learning. In: Proceedings of the Australasian Association for Engineering Education Conference. pp. 626-632. From: AAEE 2018: 29th Australasian Association for Engineering Education Conference, 9-12 December 2018, Hamilton, New Zealand.

Steinemann, Anne (2018) Exposures and effects from fragranced consumer products in Sweden. Air Quality Atmosphere and Health, 11 (5). pp. 485-491.

Steinemann, Anne (2018) Fragranced consumer products: effects on autistic adults in the United States, Australia, and United Kingdom. Air Quality Atmosphere and Health, 11 (10). pp. 1137-1142.

Siuly, Siuly, Lee, Ickjai, Huang, Zhisheng, Zhou, Rui, Wang, Hua, and Xiang, Wei (2018) Health Information Science: 7th International Conference, HIS 2018, Cairns, QLD, Australia, October 5–7, 2018, Proceedings. In: Lecture Notes in Computer Science (11148) From: HIS 2018: 7th International Conference on Health Information Science, 5-7 October 2018, Cairns, QLD, Australia.

Somasundaram, Sahadev, Ionescu, Mihail, and Mathan, Bobby Kannan (2018) Ion implantation of calcium and zinc in magnesium for biodegradable implant applications. Metals, 8 (1). 30.

Shi, Jun, Liu, Xiaoping, Fang, Xiaojie, Sha, Xuejun, Xiang, Wei, and Zhang, Qinyu (2018) Linear canonical matched filter: theory, design, and applications. IEEE Transactions on Signal Processing, 66 (24). pp. 6404-6417.

Springall, Gabriella A.C., and Yin, Ling (2018) Nano-scale mechanical behavior of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic. Journal of the Mechanical Behavior of Biomedical Materials, 82. pp. 35-44.

Sabri, Mayada, King, Hannah J., Gummow, Rosalind J., Lu, Xunyu, Zhao, Chuan, Oelgemoeller, Michael, Chang, Shery L.Y., and Hocking, Rosalie K. (2018) Oxidant or catalyst for oxidation? A study of how structure and disorder changes selectivity for direct vs. catalytic oxidation mediated by manganese (III,IV) oxides. Chemistry of Materials, 30 (22). pp. 8244-8256.

Steinemann, Anne (2018) Prevalence and effects of multiple chemical sensitivities in Australia. Preventive Medicine Reports, 10. pp. 191-194.

Song, Xiao-Fei, Yang, Jia-Jun, Ren, Hai-Tao, Lin, Bin, Nakanishi, Yoshitaka, and Yin, Ling (2018) Ultrasonic assisted high rotational speed diamond machining of dental glass ceramics. International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 387-399.

Sabri, Mayada, King, Hannah J., Gummow, Rosalind J., Malherbe, Francois, and Hocking, Rosalie K. (2018) The oxidation of peroxide by disordered metal oxide water oxidation catalysts: a measurement of thermodynamic stability "by proxy". ChemPlusChem, 83 (7). pp. 620-629.

Sethy, B.P., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Application of ANN and ANFIS for predicting the ultimate bearing capacity of eccentrically loaded rectangular foundations. International Journal of Geosynthetics and Ground Engineering, 3. 35.

Sobhan, Khaled, Patra, Chittaranjan, Sivakugan, Siva, and Das, Braja (2017) Bearing capacity of eccentrically loaded rectangular foundation on sand. In: Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering. TC104. pp. 967-970. From: ICSMGE 2017: 19th International Conference on Soil Mechanics and Geotechnical Engineering, 17-22 September 2017, Seoul, South Korea.

Satheeskumar, Navaratnam, Henderson, David James, Ginger, John David, and Wang, Chi-Hsiang (2017) Three-dimensional finite-element modeling and validation of a timber-framed house to wind loading. Journal of Structural Engineering, 143 (9). 04017112. pp. 1-11.

Sun, Zhaojie, Xiao, Yue, Yang, Ping, Li, Shaoqian, and Xiang, Wei (2017) Transmit antenna selection schemes for spatial modulation systems: search complexity reduction and large-scale MIMO applications. IEEE Transactions on Vehicular Technology, 66 (9). pp. 8010-8021.

Slogrove, H., Sheehan, M., and Walker, C. (2017) Modelling and experimental determination of the drying kinetics of Bagasse fibre. In: Proceedings of the 39th Annual Conference of the Australian Society of Sugar Cane Technologists (39) pp. 406-416. From: ASSCT 2017: 39th Annual Conference of the Australian Society of Sugar Cane Technologists, 3-5 May 2017, Cairns, QLD, Australia.

Sivakugan, Nagarathnam, Gnanendran, Carthigesu T., Tuladhar, Rabin, and Kannan, M. Bobby (2017) Civil Engineering Materials. Cengage Learning, Boston, MA, USA.

Salim, Omar H., Nasir, Ali A., Mehrpouyan, Hani, and Xiang, Wei (2017) Multi-relay communications in the presence of phase noise and carrier frequency offsets. IEEE Transactions on Communications, 65 (1). pp. 79-94.

Sahu, R., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Bearing capacity prediction of inclined loaded strip footing on reinforced sand by ANN. In: Shukla, Sanjay Kumar, and Guler, Erol, (eds.) Advances in Reinforced Soil Structures. Sustainable Civil Infrastructures . Springer, Cham, Switzerland, pp. 97-109.

Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang, C.H. (2017) Finite element modelling of the structural response of roof to wall framing connections in timber-framed houses. Engineering Structures, 134. pp. 25-36.

Stokes, Peter W., Philippa, Bronson, Cocks, Daniel, and White, Ronald D. (2017) Generalized balance equations for charged particle transport via localized and delocalized states: mobility, generalized Einstein relations, and fractional transport. Physical Review E (statistical, nonlinear, biological, and soft matter physics), 95 (4). 042119.

Scheuermann, A., Muehlhaus, H.B., Galindo-Torres, S., Harshani, H.M.D., Aminpour, M., Bittner, T., To, P., Gholami-Korzani, M., Pedroso, D., Li, L., and Gross, L. (2017) Physical and mathematical modeling of erosion processes across the scales. In: Papamichos, E., Papanastasiou, P., Pasternak, P., and Dyskin, A., (eds.) Bifurcation and Degradation of Geomaterials with Engineering Applications. Springer Series in Geomechanics and Geoengineering . Springer, Cham, Switzerland, pp. 585-591.

Sethy, B.P., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Prediction of ultimate bearing capacity eccentrically loaded rectangular foundations using ANN. In: Shukla, Sanjay Kumar, and Guler, Erol, (eds.) Advances in Reinforced Soil Structures. Sustainable Civil Infrastructures . Springer, Cham, Switzerland, pp. 148-159.

Sahu, R., Patra, C.R., Sivakugan, N., and Das, B.M. (2017) Use of ANN and Neuro Fuzzy Model to predict bearing capacity factor of strip footing resting on reinforced sand and subjected to inclined loading. International Journal of Geosynthetics and Ground Engineering, 3. 29.

Stolterfoht, Martin, Armin, Ardalan, Philippa, Bronson, and Neher, Dieter (2016) The role of space charge effects on the competition between recombination and extraction in solar cells with low-mobility photoactive layers. Journal of Physical Chemistry Letters, 7. pp. 4716-4721.

Sahu, R., Patra, C.R., Das, B.M., and Sivakugan, N. (2016) Bearing capacity of shallow strip foundation on geogrid-reinforced sand subjected to inclined load. International Journal of Geotechnical Engineering, 10 (2). pp. 183-189.

Singh, Deepesh, and Datta, Bithin (2016) Linked optimization model for groundwater monitoring network design. In: Sarma, Arup K., Singh, Vijay P., Kartha, Suresh A., and Bhattacharjya, Rajib K., (eds.) Urban Hydrology, Watershed Management and Socio-Economic Aspects. Water Science and Technology Library, 73 . Springer, Cham, Switzerland, pp. 107-125.

Sahu, R., Patra, C.R., Das, B.M., and Sivakugan, N. (2016) Ultimate bearing capacity of rectangular foundation on geogrid-reinforced sand under eccentric load. International Journal of Geotechnical Engineering, 10 (1). pp. 52-56.

Sivakugan, Nagaratnam, Veenstra, Ryan, and Niroshan, Naguleswaran (2015) Underground mine backfilling in Australia using paste fills and hydraulic fills. International Journal of Geosynthetics and Ground Engineering, 1 (2). 18. pp. 1-7.

Shahriar, Mohammad Abu Naser, Das, Braja M., and Sivakugan, Nagaratnam (2015) Developments in quantifying the effect of water table rise on additional settlements of shallow foundations resting on granular soils. International Journal of Geotechnical Engineering, 9 (1). pp. 67-78.

Shahriar, Mohammad A., Sivakugan, Nagaratnam, Das, Braja M., Urquhart, Alex, and Tapiolas, Michael (2015) Water table correction factors for settlements of shallow foundations in granular soils. International Journal of Geomechanics, 15 (1). 06014015. pp. 1-7.

Sivakugan, Nagaratnam (2015) Preface to special issue on foundations. International Journal of Geotechnical Engineering, 9 (1). p. 1.

Sivakugan, Nagaratnam, Lovisa, Julie, and Ameratunga, J. (2015) Filling the hole in the ground: from mining to land reclamation. Environmental Geotechnics, 2 (3). pp. 128-129.

Sivakugan, Nagaratnam, Rankine, Kirralee, and Rankine, Rudd (2015) Geotechnical aspects of hydraulic filling of Australian underground mine stopes. In: Indraratna, Buddhima, Chu, Jian, and Rujikiatkamjorn, Cholachat, (eds.) Ground Improvement Case Histories: compaction, grouting and geosynthetics. Elsevier, Sydney, NSW Australia, pp. 83-109.

Sun, Guangzhi, Saeed, Tanveer, Zhang, Guangxin, and Sivakugan, Nagaratnam (2015) Water quantity and quality assessment on a tertiary treatment wetland in a tropical climate. Water Science & Technology, 71 (4). pp. 511-517.

Situ, R., Grech, S., and Santarossa, L.G. (2014) Energy model for diesel hydraulic cane haul locomotives. In: Proceedings of the Australian Society of Sugar Cane Technologists (36) M28. pp. 344-358. From: ASSCT 2014: 36th Annual Conference of the Australian Society of Sugar Cane Technologists, 28 April - 1 May 2014, Broadbeach, QLD, Australia.

Surawski, N.C., Miljevic, B., Bodisco, T.A., Situ, R., Brown, R.J., and Ristovski, Z.D. (2014) Performance and gaseous and particle emissions from a liquefied petroleum gas (LPG) fumigated compression ignition engine. Fuel , 133. pp. 17-25.

Sivakugan, Nagaratnam, Lovisa, Julie, Ameratunga, Jay, and Das, Braja M. (2014) Consolidation settlement due to ramp loading. International Journal of Geotechnical Engineering, 8 (2). pp. 191-196.

Saeed, Tanveer, Al-Muyeed, Abdullah, Afrin, Rumana, Rahman, Habibur, and Sun, Guangzhi (2014) Pollutant removal from municipal wastewater employing baffled subsurface flow and integrated surface flow-floating treatment wetlands. Journal of Environmental Sciences, 26 (4). pp. 726-736.

Sivakugan, N., Das, B.M., Lovisa, J., and Patra, C.R. (2014) Determination of c and φ of rocks from indirect tensile strength and uniaxial compression tests. International Journal of Geotechnical Engineering, 8 (1). pp. 59-65.

Stewart, Nicholas J., Holmes, David W., Lin, Wenxian, Armfield, Steven W., and Kirkpatrick, Michael P. (2014) Comparison of semi-implicit and explicit finite difference algorithms on highly parallel processing architectures. Applied Mechanics and Materials, 553. pp. 193-198.

Sivakugan, Nagaratnam, Widisinghe, Sankha, and Wang, Vincent Z. (2014) Vertical stress determination within backfilled mine stopes. International Journal of Geomechanics, 14 (5). 06014011-1. pp. 1-5.

Saeed, Tanveer Ferdous, Al Muyeed, Abdullah, and Sun, Guangzhi (2013) Ammoniacal nitrogen and organics removal modelling in vertical flow wetlands treating strong wastewaters. Wetland Science, 11 (4). pp. 421-432.

Stewart, Nicholas J., Holmes, David W., Lin, Wenxian, Armfield, Steven W., and Kirkpatrick, Michael P. (2013) Direct numeric simulation of sheared convective boundary layer entrainment with GPUs. In: Proceedings of the 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics. 1392. pp. 1-8. From: APCOM and ISCM 2013: 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, 11-14 December 2013, Singapore.

Smith, Calvin M., and Yin, Ling (2013) Nanoindentation studies on lithium disilicate glass ceramics. In: Proceedings of the Materials Science and Technology Conference. pp. 2825-2831. From: MS&T 2013: Materials Science and Technology Conference, 27-31 October 2013, Montréal, QC, Cananda.

Shahriar, M.A., Sivakugan, N., Urquhart, A., Tapiolas, M., and Das, B.M. (2013) A study on the influence of ground water level on foundation settlement in cohesionless soil. In: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics (1) pp. 953-956. From: 18th ICSMGE: 18th International Conference on Soil Mechanics and Geotechnical Engineering: challenges and innovations in geotechnics, 2-6 September 2013, Paris, France.

Sivakugan, Nagaratnam, Rankine, Kelda, Lovisa, Julie, and Hall, William (2013) Flow rate computations in hydraulic fill mine stopes. Indian Geotechnical Journal, 43 (3). pp. 195-202.

Suehrcke, Harry, Bowden, Ross S., and Hollands, K.G.T. (2013) Relationship between sunshine duration and solar radiation. Solar Energy, 92. pp. 160-171.

Shahriar, M. Abu Naser, Sivakugan, N., and Das, B.M. (2013) Settlement correction for future water table rise in granuular soils: a numerical modelling approach. International Journal of Geotechnical Engineering, 7 (2). pp. 214-217.

Song, Xin, Gao, Wenfeng, Liu, Tao, Lin, Wenxian, Li, Ming, and Luo, Chuanxu (2013) The operational thermal performance of a simple passive solar house in winter: a case study in Kunming, China. International Journal of Green Energy, 10 (6). pp. 647-660.

Sivakugan, Nagaratnam, and Widisinghe, Sankha (2013) Stresses within granular materials contained between vertical walls. Indian Geotechnical Journal, 43 (1). pp. 30-38.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2013) Load coefficient for ditch conduits covered with geosynthetic-reinforced granular backfill. International Journal of Geomechanics, 13 (1). pp. 76-82.

Song, Xiao-Fei, Yin, Ling, Peng, Jian-Hui, and Lin, Bin (2013) Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece. Ceramics International, 39 (6). pp. 6237-6249.

Srinarayana, N., Armfield, S.W., and Lin, Wenxian (2013) Behaviour of laminar plane fountains with a parabolic inlet velocity profile in a homogeneous fluid. International Journal of Thermal Sciences, 67. pp. 87-95.

Song, Xiao-Fei, Peng, Jian-Hui, Yin, Ling, and Lin, Bin (2013) A machining science approach to dental cutting of glass ceramics using an electric handpiece and diamond burs. Journal of Manufacturing Science and Engineering, 135 (1). 011014. pp. 1-6.

Sawant, V.A., Shukla, S.K., Sivakugan, N., and Das, B.M. (2013) Insight into pile set-up and load carrying capacity of driven piles. International Journal of Geotechnical Engineering, 7 (1). pp. 71-83.

Situ, Rong, and Brown, Richard J. (2013) Mixing and dispersion of pollutants emitted from an outboard motor. Marine Pollution Bulletin, 69 (1-2). pp. 19-27.

Schneider, Philip A., Wallace, James W., and Tickle, Julian C. (2013) Modelling and dynamic simulation of struvite precipitation from source-separated urine. Water Science and Technology, 67 (12). pp. 2724-2732.

Situ, Rong, Ireland, Glenn, Bodisco, Tim, and Brown, Richard (2013) Thermodynamic modeling of ethanol fumigation in a diesel engine. In: Proceedings of the 20th International Congress on Modelling and Simulation. pp. 1568-1574. From: MODSIM2013: 20th International Congress on Modelling and Simulation, 1-6 December 2013, Adelaide, SA, Australia.

Saeed, Tanveer, and Sun, Guangzhi (2013) A lab-scale study of constructed wetlands with sugarcane bagasse and sand media for the treatment of textile wastewater. Bioresource Technology, 128. pp. 438-447.

Sivakugan, Nagaratnam, Shukla, Sanjay Kumar, and Das, Braja M. (2012) Rock Mechanics: an introduction. Taylor & Francis, Boca Raton, FL, USA.

Saeed, Tanveer, and Sun, Guangzhi (2012) A review on nitrogen and organics removal mechanisms in subsurface flow constructed wetlands: dependency on environmental parameters, operating conditions and supporting media. Journal of Environmental Management, 112. pp. 429-448.

Situ, R., Brown, R.J., Wang, H., Surawski, N., and Ristovski, Z.D. (2012) Exit humidity of wet scrubbers for underground coal mines. In: Proceedings of the 18th Australasian Fluid Mechanics Conference. 140. pp. 1-4. From: 18th Australasian Fluid Mechanics Conference, 3-7 December 2012, Launceston, Tasmania, Australia.

Shahriar, Mohammad Abu Naser, Sivakugan, Nagaratnam, and Das, Braja M. (2012) Settlements of shallow foundations in granular soils due to rise of water table: a critical review. International Journal of Geotechnical Engineering, 6 (4). pp. 515-524.

Sivakugan, Nagaratnam, and Rankine, Kelda (2012) Three-dimensional method of fragments to study drainage through hydraulic fill stopes. International Journal of Geomechanics, 12 (5). pp. 612-615.

Sun, Guangzhi, Zhu, Yafei, Saeed, Tanveer, Zhang, Guangxin, and Lu, Xianguo (2012) Nitrogen removal and microbial community profiles in six wetland columns receiving high ammonia load. Chemical Engineering Journal, 203. pp. 326-332.

Sheehan, Madoc, Desha, Cheryl, Schneider, Phil, and Turner, Phil (2012) Embedding sustainability into chemical engineering education: content development and competency mapping. In: Chemeca 2012. pp. 927-936. From: Quality of Life Through Chemical Engineering, 23-26 September 2012, The Museum of New Zeland, Te Papa Tongarewa, Wellington, New Zealand.

Saeed, Tanveer, Afrin, Rumana, Al Muyeed, Abdullah, and Sun, Guangzhi (2012) Treatment of tannery wastewater in a pilot-scale hybrid constructed wetland system in Bangladesh. Chemosphere, 88 (9). pp. 1065-1073.

Shahriar, M.A., Sivakugan, N., and Das, B.M. (2012) Strain influence factors for footings on an elastic medium. In: ANZ 2012 Conference Proceedings. pp. 131-136. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, Australia.

Song, Xiao-Fei, Yin, Ling, Peng, Jianhui, and Lin, Bin (2012) In vitro dental cutting of feldspar and leucite glass ceramics using an electric handpiece. In: Proceedings of the ASME International Manufacturing Science and Engineering Conference. MSEC2012-7290. pp. 43-50. From: ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012, 4-8 June 2012, Notre Dame, Indiana, USA.

Saeed, Tanveer Ferdous, and Sun, Guangzhi (2012) A comparative study of pollutant removal stability in hybrid wetland columns. Wetland Science, 10 (2). pp. 142-148.

Sreekanth, J., and Datta, Bithin (2012) Comment on "Artificial neural network model as a potential alternative for groundwater salinity forecasting" by Pallavi Banerjee et al. [J. Hydrol. 398 (2011) 212–220]. Journal of Hydrology, 420-421. pp. 419-420.

Song, Xiao-Fei, and Yin, Ling (2012) Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 534. 25. pp. 193-202.

Sheehan, Madoc, Schneider, Phil, and Desha, Cheryl (2012) Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia. Chemistry Education Research and Practice, 13 (2). pp. 112-119.

Sreekanth, J., Datta, Bithin, and Mohapatra, Pranab K. (2012) Optimal short-term reservoir operation with integrated long-term goals. Water Resources Management, 26 (10). pp. 2833-2850.

Shukla, S.K., Sivakugan, N., and Das, B.M. (2012) Slopes - stabilisation. In: Shukla, Sanjay Kumar, (ed.) Handbook of Geosynthetic Engineering: geosynthetics and their applications. ICE Publishing, London, pp. 223-243.

Singh, Devendar N., Sivakugan, Siva, and Vanapalli, Sai K. (2011) Advances in instrumentation and monitoring in geotechnical engineering. Advances in Civil Engineering, 2011. 871406. pp. 1-2.

Situ, R., Hibiki, T., Brown, R.J., Hazuku, T., and Takamasa, T. (2011) Flow regime transition criteria for two-phase flow at reduced gravity conditions. International Journal of Multiphase Flow, 37 (9). pp. 1165-1177.

Singh, Shailesh, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Arching in inclined and vertical mine stopes. Geotechnical and Geological Engineering, 29 (5). pp. 685-693.

Shukla, Sanjay Kumar, Gupta, Ashish, and Sivakugan, Nagaratnam (2011) Analysis of circular elastic plate resting on Pasternak foundation by strain energy approach. Geotechnical and Geological Engineering, 29 (4). pp. 613-618.

Shukla, Sanjay K., Sivakugan, Nagaratnam, and Das, Braja M. (2011) Analytical expression for dynamic passive pressure from c-ϕ soil backfill with surcharge. International Journal of Geotechnical Engineering, 5 (3). pp. 357-362.

Sivakugan, Siva, Arulrajah, Atputharajah, and Bo, Myint Win (2011) Laboratory testing of soils, rocks and aggregates. J. Ross Publishing, Fort Launderdale, FL, USA.

Steward, T., Sivakugan, N., Shukla, S.K., and Das, B.M. (2011) Taylor's slope stability charts revisted. International Journal of Geomechanics, 11 (4). pp. 348-352.

Saha, Suvash C., Patterson, John C., and Lei, Chengwang (2011) Scaling of natural convection of an inclined flat plate: sudden cooling condition. Journal of Heat Transfer, 133 (4). 041503. pp. 1-9.

Shukla, Sanjay K., Sivakugan, Nagaratnam, and Das, Braja M. (2011) A state-of-the-art review of geosynthetic-reinforced slopes. International Journal of Geotechnical Engineering, 5 (1). pp. 17-32.

Sheehan, M.E., and Donaldson, M. (2011) Validation and optimization of an equilibrium model of a hot-lime-softening treatment system. Journal of Environmental Engineering, 137 (3). pp. 205-212.

Saha, S. C. (2011) Unsteady natural convection in a triangular enclosure under isothermal heating. Energy and Buildings, 43 (2-3). pp. 695-703.

Sreekanth, J., and Datta, Bithin (2011) Comparative evaluation of genetic programming and neural network as potential surrogate models for coastal aquifer management. Water Resource Management, 25 (13). pp. 3201-3218.

Sreekanth, J., and Datta, Bithin (2011) Coupled simulation-optimization model for coastal aquifer management using genetic programming-based ensemble surrogate models and multiple-realization optimization. Water Resources Research, 47. W04516. pp. 1-17.

Sivakugan, Nagaratnam, and Pacheco, Marcus (2011) Design of shallow foundations. In: Das, Braja M., (ed.) Geotechnical Engineering Handbook. J. Ross Publishing, Fort Lauderdale, FL, USA, pp. 3-1.

Sudheendran, K., Raju, K.C. James, and Jacob, Mohan V. (2011) Low temperature dielectric properties of Ca0.7Nd0.3Ti0.7Al0.3O3 microwave ceramics. Journal of the Australian Ceramic Society, 47 (2). pp. 65-68.

Sreekanth, J., and Datta, Bithin (2011) Optimal combined operation of production and barrier wells for the control of saltwater intrusion in coastal groundwater well fields. Desalination and Water Treatment, 32 (1-3). pp. 72-78.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Site investigation and in situ tests. In: Das, Braja M., (ed.) Geotechnical Engineering Handbook. J. Ross Publishing, Fort Lauderdale, FL, USA, 10.1-10.78.

Sreekanth, J., and Datta, Bithin (2011) Wavelet and cross-wavelet analysis of groundwater quality signals of saltwater intruded coastal aquifers. In: Proceedings of the 2011 World Environmental and Water Resources Congress (414) pp. 846-853. From: World Environmental and Water Resources Congress 2011: Bearing Knowledge for Sustainability, 22-26 May 2011, Palm Springs, CA, USA.

Situ, Rong, Brown, Richard J., and Loberto, Anthony (2010) Experimental study of the concentration field of discharge from a boat propeller. Environmental Fluid Mechanics, 10 (6). pp. 657-675.

Sreekanth, J., and Datta, Bithin (2010) Multi-objective management of saltwater intrusion in coastal aquifers using genetic programming and modular neural network based surrogate models. Journal of Hydrology, 393 (3-4). pp. 245-256.

Shukla, S.K, Sivakugan, N., and Singh, A.K. (2010) Analytical model for fiber-reinforced granular soils under high confining stresses. Journal of Materials in Civil Engineering, 22 (9). pp. 935-942.

Saha, Suvash C., Patterson, John C., and Lei, Chengwang (2010) Natural convection boundary-layer adjacent to an inclined flat plate subject to sudden and ramp heating. International Journal of Thermal Sciences, 49 (9). pp. 1600-1612.

Song, X-F., and Yin, L. (2010) Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic. Journal of Oral Rehabilitation, 37 (9). pp. 680-691.

Schneider, Philip A. (2010) Engaging students by efficiently monitoring attendance and participation. In: Proceedings of the 13th First Year in Higher Education Conference. pp. 1-5. From: FYHE 2010: 13th First Year in Higher Education Conference, 27 - 30 June 2010, Adelaide, SA, Australia.

Song, Xiao-Fei, and Yin, Ling (2010) Induced damage zone in micro-fine dental finishing of a feldspathic porcelain. Medical Engineering and Physics, 32 (5). pp. 417-422.

Singh, S., Sivakugan, N., and Shukla, S.K. (2010) Can soil arching be insensitive to phi? International Journal of Geomechanics, 10 (3). pp. 124-128.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2010) Discussion of "Fiber-reinforced flyash subbases in rural roads," by Praveen Kumar and Shailendra Pratap Singh. Journal of Transportation Engineering, 136 (4). pp. 400-401.

Srinarayana, N., Armfield, S.W., Behnia, M., and Lin, Wenxian (2010) Critical Froude number for transition from a steady to an unsteady fountain injected into a homogeneous fluid. In: Proceedings of the 17th Australasian Fluid Mechanics Conference. pp. 1-3. From: 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand.

Song, Xiao-Fei, and Yin, Ling (2010) FEA-predicted subsurface damage in micro finishing of a feldspar porcelain using fine-grit dental burs. Key Engineering Materials, 443. pp. 562-566.

Sivakugan, N., and Das, Braja M. (2010) Geotechnical Engineering: a practical problem solving approach. Eureka Series . J. Ross Publishing, USA.

Sreekanth, Janardhanan, and Datta, Bithin (2010) Multi-objective management models for optimal and sustainable use of coastal aquifers. In: Papers from Groundwater 2010. pp. 1-5. From: Groundwater 2010, 31 October - 4 November 2010, Canberra, ACT, Australia.

Song, X-F., and Yin, L. (2010) The quantitative effect of diamond grit size on the subsurface damage induced in dental adjustment of porcelain surfaces. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 224 (10). pp. 1185-1194.

Salehi, M., and Sivakugan, N. (2009) Effects of lime-clay modification on the consolidation behaviour of the dredged mud. Journal of Waterway Port Coastal and Ocean Engineering-ASCE, 135 (6). pp. 251-258.

Shukla, S.K., Khandelwal, S., Verma, V.N., and Sivakugan, N. (2009) Effect of surcharge on on the stability of anchored rock slope with water filled tension crack under seismic loading condition. Geotechnical and Geological Engineering, 27 (4). pp. 529-538.

Shukla, Sanjay K., Sivakugan, Nagaratnam, Das, Braja M., and Singh, Ashish K. (2009) Fundamental concepts of soil reinforcement - an overview. International Journal of Geotechnical Engineering, 3 (3). pp. 329-342.

Shukla, Sanjay Kumar, Gaurav, , and Sivakugan, Nagaratnam (2009) A simplified extension of the conventional theory of arching in soils. International Journal of Geotechnical Engineering, 3 (3). pp. 353-359.

Shukla, Sanjay K., Loughran, Jeffrey G., and Sivakugan, Nagaratnam (2009) Stress within a cohesionless granular fill in a storage vessel with sloping walls during initial static loading. Powder Technology, 192 (3). pp. 389-393.

Sudheendran, Kooriyattil, Kanakkappillavila Chinnayya, James Raju, and Jacob, Mohan Vadakkedam (2009) Microwave dielectric properties of Ti-substituted Bi2 (Zn 2/3Nb4/3)O7 pyrochlores at cryogenic temperatures. Journal of the American Ceramic Society, 92 (6). pp. 1268-1271.

Shukla, Sanjay Kumar, Gupta, Shrawan Kumar, and Sivakugan, Nagaratnam (2009) Active earth pressure on retaining wall for c-phi soil backfill under seismic loading condition. Journal of Geotechnical and Geoenvironmental Engineering, 135 (5). pp. 690-696.

Song , Xiao-Fei, Yin, Ling, and Han, Yi-Gang (2009) In-process assessment of dental cutting of a leucite-reinforced glass–ceramic. Medical Engineering and Physics, 31 (2). pp. 214-220.

Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2009) Insitu testing of highways and runways. Civil Engineering & Construction Review, 22 (3). pp. 78-86.

Shukla, Sanjay Kumar, Sivakugan, Nagaratnam, and Mahto, Sitaram (2009) A simple method for estimating Poisson's ratio of geosynthetics at zero strain. Geotechnical Testing Journal, 32 (2). pp. 181-185.

Song, Xiao-Fei, and Yin, Ling (2009) Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. Journal of Biomechanics, 42 (3). pp. 355-360.

Scardino, A.J., Hudleston, D., Peng, Z., Paul, N.A., and de Nys, R. (2009) Biomimetic characterisation of key surface parameters for the development of fouling resistant materials. Biofouling, 25 (1). pp. 83-93.

Shukla, S.K., Sivakugan, N., and Das, B.M. (2009) Methods for determination of the coefficient of consolidation and the time-rate settlement - an overview. International Journal of Geotechnical Engineering, 3 (1). pp. 89-108.

Sim, L., Shu, L., Jegatheesan, V., and Phong , D.D. (2009) Effect of operating parameters and cleaning on the performance of ceramic membranes treating partially clarified sugar cane juice. Separation Science and Technology, 44 (15). pp. 3506-3537.

Srinarayana, N., Armfield, S.W., and Lin, W.X. (2009) Impinging plane fountains in a homogeneous fluid. International Journal of Heat and Mass Transfer, 52. pp. 2614-2623.

Shukla, S.K., Sivakugan, N., Gandhi, M., and Ahmad, M.K. (2009) Improved expressions for field values of compaction test parameters. Géotechnique, 59 (10). pp. 851-853.

Srinarayana, N., Armfield, S.W., and Lin, Wenxian (2009) Laminar plane fountains impinging on a ceiling with an opposing heat flux. International Journal of Heat and Mass Transfer, 52. pp. 4545-4552.

Steicke, C., Jegatheesan, V., and Zeng, C. (2009) Performance of a recirculating tank-based system utilizing floating and submerged filters with a denitrification column for the culture of barramundi (Lates calcarifer). In: Proceedings of the Fourth International Symposium on Southeast Asian Water Environment (4) pp. 253-260. From: Fourth International Symposium on Southeast Asian Water Environment, 6-8 December 2006, Bangkok, Thailand.

Steicke, C.R., Jegatheesan, V., and Zeng, C. (2009) Recirculating aquaculture systems - a review. In: Vigneswaran, S., (ed.) Water and Wastewater Treatment Technologies. Encyclopedia of Life Support Systems , 1-2 . EOLSS, Oxford, UK, pp. 1-25.

Schneider, P.A., and Ali, Md I. (2009) The application of process systems engineering to the development of struvite recovery systems. In: Proceedings of the 2009 International Conference on Nutrient Recovery from Wastewater Streams. From: 2009 International Conference on Nutrient Recovery from Wastewater Streams, 10 - 13 May, 2009, Vancouver, BC, Canada.

Shukla, S.K., and Sivakugan, N. (2009) A general expression for geosynthetic strain due to deflection. Geosynthetic International, 16 (5). pp. 402-407.

Subodh, G., Ratheesh, R., Jacob, M.V., and Sebastian, M.T. (2008) Microwave dielectric properties and vibrational spectroscopic analysis of MgTe2O5 ceramics. Journal of Materials Research, 23 (6). pp. 1551-1556.

Sheehan, M.E., Ajayi, O., and Lee, A. (2008) Modelling solids transport in an industrial flighted rotary dryer. In: Proceedings of the 18th European Symposium on Computer Aided Process Engineering 2008 (25) From: 18th European Symposium on Computer Aided Process Engineering 2008 , 1-4 June 2008, Lyon, France.

Singh, Shailesh, Sivakugan, Nagaratnam, and Chandra, Sarvesh (2008) The permeability of hydraulic fills under surcharge. International Journal of Geotechnical Engineering, 2 (2). pp. 77-87.

Sivakugan, Nagaratnam (2008) Geotechnical issues of mining with hydraulic backfills. Electronic Journal of Geotechnical Engineering.

Srinarayana, N., McBain, G.D., Armfield, S.W., and Lin, W.X. (2008) Height and stability of laminar plane fountains in a homogeneous fluid. International Journal of Heat and Mass Transfer, 51. pp. 4717-4727.

Singh, Shailesh, and Sivakugan, Nagaratnam (2008) Time dependent settlements in hydraulic fills. International Journal of Geotechnical Engineering, 2 (4). pp. 293-302.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) Effect of aspect ratio on natural convection in attics subject to periodic thermal forcing. ANZIAM Journal, 48. pp. 677-691.

Steicke, C., Jegatheesan, V., and Zeng, C. (2007) Mechanical mode floating medium filters for recirculating systems in aquaculture for higher solids retention and lower freshwater usage. Bioresource Technology, 98 (17). pp. 3375-3383.

Srinarayana, N., Armfield, S.W., and Lin, W.X. (2007) Numerical simulation of free-fountains in a homogeneous fluid. In: Proceedings of the 16th Australasian Fluid Mechanics Conference. pp. 856-861. From: 16th Australasian Fluid Mechanics Conference, 3-7 December 2007, Gold Coast, Australia.

Shinozaki, Hino, Aravinthan, Thiru, Pandey, Govinda Raj, and Mutsuyoshi, Hiroshi (2007) Advancements in retrofitting reinforced concrete structures in Japan using FRP sheets. In: Proceedings of the 23rd Biennial Conference of the Concrete Institute of Australia. pp. 563-571. From: Concrete 07: Design, Materials & Construction: concrete for the future, 18-20 October 2007, Adelaide, SA, Australia.

Singh, Shailesh, and Sivakugan, Nagaratnam (2007) Consolidation behavior of hydraulic fills. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (2) pp. 162-167. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) On the natural convection boundary layer adjacent to an inclined flat plate subject to ramp heating. In: 16th Australasian Fluid Mechanics Conference. pp. 121-124. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast.

Saha, S.C., Lei, C., and Patterson, J.C. (2007) Scaling analysis of the thermal boundary layer adjacent to an abruptly heated inclined flat plate. In: 16th Australasian Fluid Mechanics Conference. pp. 117-120. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Sivakugan, Nagaratnam, and Pacheco, Marcus (2007) Statistical inference of propagation of a leachate plume. In: Common Ground. Proceedings of the 10th Australia New Zealand Conference on Geomechanics (1) pp. 398-403. From: 10th Australia New Zealand Conference on Geomechanics, 21-24 Oct 2007, Brisbane, QLD, Australia.

Shu, L., Schneider, P., Jegatheesan, V., and Johnson, J. (2006) An economic evaluation of phosphorus recovery as struvite from digester supernatant. Bioresource Technology, 97 (17). pp. 2211-2216.

Sivakugan, Nagaratnam, and Rankine, Kelda S. (2006) A simple solution for drainage through a 2-dimensional hydraulic fill stope. Geotechnical and Geological Engineering, 24 (5). pp. 1229-1241.

Sivakugan, Nagaratnam, Rankine, Kirralee, and Rankine, Rudd (2006) Permeability of hydraulic fills and barricade bricks. Geotechnical and Geological Engineering, 24 (3). pp. 661-673.

Singh, Raj Mohan, and Datta, Bithin (2006) Identification of groundwater pollution sources using GA-based linked simulation optimization model. Journal of Hydrologic Engineering, 11 (2). pp. 101-109.

Srinarayana, N., Lin, W., McBain, G.D., and Armfield, S.W. (2006) Direct simulation of impinging plane fountains in a homogeneous fluid. In: Proceedings of the 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference, 13-18 August 2006, Sydney, NSW, Australia.

Sivakugan, N., Rankine, R.M., Rankine, K.J., and Rankine, K.S. (2006) Geotechnical considerations in mine backfilling in Australia. Journal of Cleaner Production, 14 (12). pp. 1168-1175.

Saha, S.C., Lei, C., and Patterson, J.C. (2006) Natural convection in a triangular enclosure subject to periodic thermal forcing. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Sivakugan, N., Rankine, K.J., and Rankine, K.S. (2006) Study of drainage through hydraulic fill stopes using methods of fragments. Geotechnical and Geological Engineering, 24 (1). pp. 79-89.

Shu, Li, Berndt, Christopher C., and Hodzic, Alma (2006) Sugar cane bagasse fibre for sustainable manufacturing: an overview of applications. In: Proceedings of Developments in Composites: Advanced, Infrastructural, Natural and Nano-composites. pp. 248-253. From: ACUN-5: International Composites Conference, 11-14 July 2006, Sydney, NSW, Australia.

Surendran, Kuzhichalil P., Sebastian, Mailadil T., Mohanan, Pezholil, and Jacob, Mohan V. (2005) The effect of dopants on the microwave dielectric properties of Ba(Mg0.33Ta0.67)O3 ceramics. Journal of Applied Physics, 98 (9). 094114. pp. 1-9.

Sivakugan, Nagaratnam, Rankine, Kirralee , and Rankine, Rudd (2005) Geotechnical aspects of hydraulic filling of underground mine stopes in Australia. In: Indraratna, Buddhima, Chu, Jian, and Hudson, John A., (eds.) Ground Improvement: case histories. Geo-Engineering Book Series, 3 . Elsevier , Oxford, UK, pp. 513-538.

Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A model for solids transport in flighted rotary dryers based on physical considerations. Chemical Engineering Science, 60 (15). pp. 4171-4182.

Shu, L., Waite, T.D., Bliss, P.J., Fane, A., and Jegatheesan, V. (2005) Nanofiltration for the possible reuse of water and recovery of sodium chloride salt from textile effluent. Desalination, 172 (3). pp. 235-243.

Sheehan, Madoc, Britton, Paul, and Wong, Jia Yi (2005) Investigation of crystal abrasion and dust generation in a spouted fluidised bed dryer. In: Proceedings of the 2005 Conference of the Australian Society of Sugar Cane Technologists (27) pp. 411-422. From: 27th Annual Conference Australian Society of Sugar Cane Technologists, 3-6 May 2005, Bundaberg, QLD, Australia.

Singj, Raj Mohan, and Datta, Bithin (2004) Groundwater pollution source identification and simultaneous parameter estimation using pattern matching by artificial neural network. Enviromental Forensics, 5. pp. 143-153.

Sivakugan, N., and Johnson, K. (2004) Settlement predictions in granular soils: a probabilistic approach. Géotechnique, 54 (7). pp. 499-502.

Schneider, P.A., and Vigh, S.N. (2004) Batch pan control by microwave brix. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Sheehan, M.E., and Schneider, P.A. (2003) Characterisation of spouted fluidisation of raw sugar. In: Proceedings of the 25th Australian Society of Sugar Cane Technologists Conference (25) pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Streeter, Megan, Jegatheesan, Veeriah, and Fracchia, Henry (2003) Chlorine decay and biofilm growth in tropical drinking water distribution system - a case study for Townsville. In: Papers from OzWater, AWA 20th Convention. pp. 1-17. From: OzWater, AWA 20th Convention, 6-10 April 2003, Perth, WA, Australia.

Schneider, P.A. (2003) Evaluation of an alternative vacuum pan control scheme. In: Proceedings of the 25th Australian Society of Sugar Cane Technologists Conference (25) pp. 1-9. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Schneider, P.A., Sheehan, M.E., and Brown, S.T. (2003) Modelling the dynamics of solids transport in flighted rotary dryers. Computer Aided Chemical Engineering, 14. pp. 911-916.

Shu, L., Waite, T.D., Bliss, P.J., Pailthorpe, M.T., and Jegatheesan, V. (2003) Possible changes of pore sizes during nanofiltration. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Watrequal 2003 IWA-Asia Pacific Regional Conference, 19-23 October 2003, Bangkok, Thailand.

Shu, L., Waite, T.D., Bliss, P.J., Pailthorpe, M.T., and Jegatheesan, V. (2003) Reclaiming spent liquor from cotton reactive dyebaths using nanofiltration membrane for possible reuse of water and salt. In: Proceedings of Asian Waterqual 2003 IWA-Asia Pacific Regional Conference. From: Asian Watrequal 2003 IWA-Asia Pacific reginal Conference, 19-23 October 2003, Bangkok, Thailand.

Sanderson, Brian, and Brassington, Gary (2002) Fourth- and fifth-order finite-difference methods applied to a control-volume ocean model. Journal of Atmospheric and Oceanic Technology, 19 (9). pp. 1424-1441.

Sivakugan, N., and Johnson, K. (2002) Probabilistic design chart for settlements of shallow foundations in granular soils. Australian Civil Engineering Transactions, 43. pp. 19-24.

Sheehan, M.E., Schneider, P.A., Munro, A., and Vigh, S. (2002) Transportation and axial dispersion of sugar in flighted rotary dryers. In: Proceedings of the 24th Conference of the Australian Society of Sugar Cane Technologists. From: 2002 Conference of the Australian Society of Sugar Cane Technologists, 29 April - 2 May 2002, Cairns, QLD, Australia.

Sheehan, M., and Sharratt, P.N. (2000) Predicting solvent effects on reactions and liquid-liquid equilibrium by computer simulation. Chemical Engineering Research and Design, 78 (8). pp. 1077-1083.

Suehrcke, Harry, Lowe, Rodney W., and Harris, Jonathan A. (2000) Effect of wall emissivity on the coupled radiative and conductive heat transfer across honeycomb transparent insulation. In: Proceedings of the 7th Heath and Mass Transfer Conference. pp. 301-307. From: 7th Australasian Heat and Mass Transfer Conference, 3-6 July 2000, Townsville, QLD, Australia.

Suehrcke, Harry (2000) On the relationship between duration of sunshine and solar radiation on the earth's surface: Ångström's equation revisited. Solar Energy, 68 (5). pp. 417-425.

Savvides, Nick, Katsaros, Alex, Reilly, David, Foley, Cathy, Leong, Kenneth, and Ceremuga, Janina (1996) Microwave properties and microstructure of Y1Ba2Cu3O7 thin films. Czechoslovak Journal of Physics, 46 (2 Supplement). LT 21. pp. 1109-1110.

Singh, Shailesh (2009) Drainage and settlement characteristics of hydraulic fills. PhD thesis, James Cook University.

Salehi, Mehdi (2009) Lime-clay modification and its application in the construction of man-made islands. Masters (Research) thesis, James Cook University.

Sands, Leonard Brett (2008) The influence of groundwater conditions on streambank stability in the Wet Tropics. Masters (Research) thesis, James Cook University.

T

Tan, Nathan chinag Ping, Miller, Catherine M., Dos Santos Antunes, Elsa, and Sharma, Dileep (2022) Impact of physical decontamination methods on zirconia implant surface and subsequent bacterial adhesion: an in-vitro study. Clinical and Experimental Dental Research, 8 (1). pp. 313-321. (In Press)

Tucker, Robert, Khatamifar, Mehdi, Lin, Wenxian, and McDonald, Kyle (2022) The Influence of Geometry Variation and Heat Sink Angle on its Thermal Performance. In: [Presented at the 12th Australasian Heat and Mass Transfer Conference] (8) From: 12AHMTC: 12th Australasian Heat and Mass Transfer Conference, 30 June – 1 July 2022, Sydney, NSW, Australia.

Tucker, Robert, Khatamifar, Mehdi, Lin, Wenxian, and McDonald, Kyle (2021) Experimental investigation of orientation and geometry effect on additive manufactured aluminium LED heat sinks under natural convection. Thermal Science and Engineering Progress, 23. 100918.

Tabish, Asif Nadeem, Fan, Liyuan, Farhat, Iqra, Irshad, Muneeb, and Abbas, Syed Zaheer (2021) Computational fluid dynamics modeling of anode-supported solid oxide fuel cells using triple-phase boundary-based kinetics. Journal of Power Sources, 513. 230564.

Timbs, Kalen, Khatamifar, Mehdi, Antunes, Elsa, and Lin, Wenxian (2021) Experimental study on the heat dissipation performance of straight and oblique fin heat sinks made of thermal conductive composite polymers. Thermal Science and Engineering Progress, 22. 100848.

To, Peter, and Price, Peter (2021) Influence of rate of hydraulic gradient on washed-out soil mass due to perpendicular contact erosion or poor filter design. In: Proceedings of the 10th International Conference on Scour and Erosion. pp. 50-58. From: 10th International Conference on Scour and Erosion, 18-21 October 2021, Online.

To, Peter, and Scheuermann, Alexander (2021) Suffusion assessment methods: a critical review. In: Proceedings of the 10th International Conference on Scour and Erosion. pp. 103-118. From: 10th International Conference on Scour and Erosion, 18-21 October 2021, Online.

Tan, Nathan Chiang Ping, Khan, Ahsen, Antunes, Elsa, Miller, Catherine M., and Sharma, Dileep (2021) The effects of physical decontamination methods on zirconia implant surfaces: a systematic review. Journal of Periodontal & Implant Science, 51 (4). e24.

Tuladhar, Rabin, Marshall, Amelia, and Sivakugan, Siva (2020) Use of recycled concrete aggregate for pavement construction. In: Pacheco-Torgal, Fernando, Ding, Yining, Colangelo, Francesco, and Tuladhar, Rabin, (eds.) Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment. Woodhead Publishing . Elsevier, Duxford, United Kingdom, pp. 181-197.

To, Peter, Malekzadeh, Mona, Sivakugan, Nagaratnam, Pham, Ngoc Thinh, and Yuan, Weihai (2020) 3D numerical model of electro-kinetic sedimentation-consolidation of dredged mud with variable parameters. Geotechnical and Geological Engineering, 38. pp. 4333-4348.

Taheri, Saeedeh, Brodie, Graham Ian, Gupta, Dorin, and Jacob, Mohan V. (2020) Afterglow of atmospheric non-thermal plasma for disinfection of lentil seeds from Botrytis grey mould. Innovative Food Science & Emerging Technologies, 66. 102488.

Timbs, K., Khatamifar, M., Lin, W., and Antunes, E. (2020) Experimental study on the thermal performance of straight and oblique finned, polymer heat sinks. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. From: AFMC2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

To, Peter, Agius, Daniel, and Cussen, Liam (2020) Influence of relative density of the granular base soil on filter performance. Acta Geotechnica, 15. pp. 3621-3627.

Tan, Yan, Wang, Ye, Gu, Shushi, Sun, Xianfan, Zhang, Qinyu, and Xiang, Wei (2020) Optimized coded prefetching scheme in hierarchical cache-enabled networks. In: Proceedings of the IEEE Wireless Communications and Networking Conference Workshops. From: WCNCW 2020: IEEE Wireless Communications and Networking Conference Workshops, 6-9 April 2020, Seoul, Korea.

Tamanna, Nafisa, Tuladhar, Rabin, and Sivakugan, Nagaratnam (2020) Performance of recycled waste glass sand as partial replacement of sand in concrete. Construction and Building Materials, 239. 117804.

Tamanna, Nafisa, and Tuladhar, Rabin (2020) Sustainable use of recycled glass powder as cement replacement in concrete. The Open Waste Management Journal, 13. pp. 1-13.

To, Peter (2019) A prototype of a self-assembly slope-stability scanner for small slopes. Australian Geomechanics, 54 (4). pp. 99-105.

Tan, Yue, Zheng, Kan, and Lei, Lei (2019) An in-vehicle keyword spotting system with multi-source fusion for vehicle applications. In: Proceedings of the IEEE Wireless Communications and Networking Conference. 8885980. From: WCNC 2019: IEEE Wireless Communications and Networking Conference, 15-18 April 2019, Marrakesh, Morocco.

To, P., and Sivakugan, N. (2018) Boundary stress distribution in silos filled with granular material. In: Numerical Methods in Geotechnical Engineering (1) pp. 863-868. From: NUMGE 2018: 9th European Conference on Numerical Methods in Geotechnical Engineering, 25-27 June 2018, Porto, Portugal.

To, P., and Sivakugan, N. (2018) Arching of granular flow under loading in silos. In: Numerical Methods in Geotechnical Engineering (1) pp. 857-862. From: NUMGE 2018: 9th European Conference on Numerical Methods in Geotechnical Engineering, 25-27 June 2018, Porto, Portugal.

Taheri, Saeedeh, Brodie, Graham, Jacob, Mohan V., and Antunes, Elsa (2018) Dielectric properties of chickpea, red and green lentil in the microwave frequency range as a function of temperature and moisture content. Journal of Microwave Power and Electromagnetic Energy, 52 (3). pp. 198-214.

Tuladhar, Rabin, and Yin, Shi (2018) Production of recycled polypropylene (PP) fibers from industrial plastic waste through melt-spinning process. In: Pacheco-Torgal, Fernando, Khatib, Jamal, Colangelo, Francesco, and Tuladhar, Rabin, (eds.) Use of Recycled Plastics in Eco-efficient Concrete. Woodhead Publishing, Duxford, UK, pp. 69-84.

To, P., Scheuermann, A., and Williams, D.J. (2018) Quick assessment on susceptibility to suffusion of continuously graded soils by curvature of particle size distribution. Acta Geotechnica, 13 (5). pp. 1241-1248.

Tuladhar, Rabin, and Yin, Shi (2018) Sustainability of using recycled plastic fiber in concrete. In: Fernando, Pacheco-Torgal, Khatib, Jamal, Colangelo, Francesco, and Tuladhar, Rabin, (eds.) Use of Recycled Plastics in Eco-efficient Concrete. Woodhead Publishing, Duxford, UK, pp. 441-460.

Tamanna, Nafisa, Sutan, Norsuzailina Mohamed, and Tuladhar, Rabin (2018) The effect of waste glass powder on microstructural behaviour when used a partial cement replacement. In: [Presented at the 5th International fib Congress]. From: FIB 2018: 5th International fib Congress, 7-11 October 2018, Melbourne, VIC, Australia.

To, Peter, and Tuladhar, Rabin (2018) A heutagogical approach for teaching a numerical analysis subject in engineering. In: Proceedings of the Australasian Association for Engineering Education Conference. 128. From: AAEE 2018: 29th Australasian Association for Engineering Education Conference, 9-12 December 2018, Hamilton, New Zealand.

Tamanna, Nafisa, Tuladhar, Rabin, Avosa, Nathan, and Sivakugan, Siva (2017) The effect of using waste glass powder as cement replacement in concrete. In: Proceedings of the 28th Biennial Conference of the Concrete Institute of Australia. From: Concrete 2017: 28th Biennial Conference of the Concrete Institute of Australia, 22-25 October 2017, Adelaide, SA, Australia.

Tamanna, Nafisa, Norsuzailina, Mohamed Sutan, Tuladhar, Rabin, Ching Lee, Delsye Teo, and Yakub, Ibrahim (2016) Pozzolanic properties of glass powder in cement paste. Journal of Civil Engineering, Science and Technology, 7 (2). pp. 75-81.

To, Huu Duc, Galindo-Torres, Sergio Andres, and Scheuermann, Alexander (2016) Sequential sphere packing by trilateration equations. Granular Matter, 18 (70). pp. 1-14.

Tan, D., Reid, C., Rajeev, P., Piratheepan, J., and Sivakugan, N. (2014) Earth pressure development in integral abutment bridge subjected to thermal loadings. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Tuladhar, Rabin, Pandey, Govinda R., Turner, Phil, and Christie, Daniel (2014) Turning tedious to terrific: an authentic learning experience to engage engineering students in project management. In: Proceedings of the 25th Annual Conference of the Australasian Association for Engineering Education. From: AAEE 2014: 25th Annual Conference of the Australasian Association for Engineering Education, 8-10 December 2014, Wellington, New Zealand.

Ting, Ching Hung, Sivakugan, Nagaratnam, Read, Wayne, and Shukla, Sanjay Kumar (2014) Analytical expression for vertical stresses within an inclined mine stope with non-parallel walls. Geotechnical and Geological Engineering, 32 (2). pp. 577-586.

Taguchi, Dai, Manaka, Takaaki, Iwamoto, Mitsumasa, Anderson, Liam J., and Jacob, Mohan V. (2014) Study of carrier blocking property of poly-linalyl acetate thin layer by electric-field-induced optical second-harmonic generation measurement. Chemical Physics Letters, 593. pp. 69-71.

Tuladhar, Rabin, and Lancini, Benjamin J. (2014) Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers. Structural Engineering and Mechanics, 49 (4). pp. 449-461.

Taguchi, Dai, Manaka, Takaaki, Iwamoto, Mitsumasa, Bazaka, Kateryna, and Jacob, Mohan V. (2013) Analyzing hysteresis behavior of capacitance-voltage characteristics of IZO/C₆₀/pentacene/Au diodes with a hole-transport electron-blocking polyterpenol layer by electric-field-induced optical second-harmonic generation measurement. Chemical Physics Letters, 572. pp. 150-153.

Tuladhar, Rabin, Sexton, Aaron, and Joyce, Paul (2013) Durability of concrete with pitchstone fines as a partial cement replacement. In: Proceedings of Concrete Institute of Australia’s Biennial National Conference. From: Concrete 2013: Concrete Institute of Australia’s Biennial National Conference, 16-18 October 2013, Gold Coast, QLD, Australia.

Tuladhar, R., Mutsuyoshi, H., and Maki, T. (2013) Numerical modelling and full-scale testing of concrete piles under lateral loading. Australian Journal of Structural Engineering, 14 (3). pp. 229-242.

Tilke, Peter G., Leonardi, Christopher R., Holmes, David W., and Williams, John R. (2012) A multicore numerical framework for assessing the permeability of reservoir rocks. In: Proceedings of the Fourth International Conference on Porous Media and its Applications in Science, Engineering and Industry. From: Fourth International Conference on Porous Media and its Applications in Science, Engineering and Industry, 17-22 June 2012, Potsdam, Germany.

Ting, Ching Hung, Sivakugan, Nagaratnam, and Shukla, Sanjay Kumar (2012) Laboratory simulation of the stresses within inclined stopes. Geotechnical Testing Journal, 35 (2). GTJ103693. pp. 280-294.

Ting, Ching Hung, Sivakugan, Nagaratnam, Read, Wayne, and Shukla, Sanjay Kumar (2012) Analytical method to determine vertical stresses within a granular material contained in right vertical prisms. International Journal of Geomechanics, 12 (1). pp. 74-79.

Tuladhar, Rabin, Lancini, Benjamin J., and Collister, Tony (2011) Structural behaviour of steel fibre reinforced concrete slabs with class L reinforcement. In: Proceedings of Concrete 2011: building a sustainable future. 196. pp. 1-10. From: Concrete 2011: building a sustainable future, 12-14 October 2011, Perth, WA, Australia.

Tuladhar, R., Smith, M., Pandey, G.R., and Joyce, P. (2011) Use of pitchstone fine as a partial replacement of portland cement for sustainable concrete. In: Proceedings of 2011 International Concrete Sustainability Conference. pp. 1-13. From: 2011 International Concrete Sustainability Conference, 9-11 August 2011, Boston, MA, USA.

Tian, Y., Peng, Z., Gorton, D., Xiao, Y., and Ketheesan, N. (2011) Immunohistochemical analysis of structural changes in collagen for the assessment of osteoarthritis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (7). pp. 680-687.

Tiranuntakul, M., Schneider, P.A., and Jegatheesan, J. (2011) Assessments of critical flux in a pilot-scale membrane bioreactor. Bioresource Technology, 102 (9). pp. 5370-5374.

Ting, Ching Hung, Shukla, Sanjay Kumar, and Sivakugan, Nagaratnam (2011) Arching in soils applied to inclined mine stopes. International Journal of Geomechanics, 11 (1). pp. 29-35.

Tian, Y., Wang, J., Peng, Z., and Jiang, X. (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378.

Teo, J., Liew, W.K., and Leong, Y.K. (2009) Clay, phosphate adsorption, dispersion, and rheology. Water, Air, & Soil Pollution: focus, 9 (5-6). pp. 403-407.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2008) Soil-pile-structure interaction using 3D FEM. In: Futures in Mechanics of Structures and Materials (1) pp. 269-275. From: ACMSM20 20th Australasian Conference on the Mechanics of Structures of Materials, 2 - 5 December 2008, Toowoomba, QLD, Australia.

Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2007) Analytical study of influence of pile modeling on the response behavior of concrete structures. Proceedings of the Japan Concrete Institute, 29 (3). 847- 852.

Tiranuntakul, M., Schneider, P.A., Jegatheesan, V., and Fracchia, H.L. (2006) Modelling based design of a pilot-scale membrane bioreactor for combined nutrient removal from domestic wastewater. In: Proceedings of the World Water Congress. From: 5th Biennial World Water Congress, 10-14 September 2006, Beijing, China.

Tri, P.T., Visvanathan, C., and Jegatheesan, V. (2006) Biological treatment of oily wastewater from gas stations by membrane bioreactor. Journal of Environmental Engineering and Science, 5 (4). pp. 309-316.

Tiranuntakul, M., Jegatheesan, V., Schneider, P. A., and Fracchia, H.L. (2005) Performance of an oxidation ditch retrofitted with a membrance bioreactor during the start-up. Desalination, 183 (1-3). pp. 417-424.

Tso, Yan, Kessissoglou, Nicole, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 1: dynamics of the physical system. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII). pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

Tamanna, Nafisa (2020) Use of waste glass as aggregate and cement replacement in concrete. PhD thesis, James Cook University.

Tian, Yuan (2012) Development of advanced techniques for osteoarthritis diagnosis and assessment. PhD thesis, James Cook University.

Ting, ChingHung (2011) Arching in granular materials with particular reference to inclined mine stopes. PhD thesis, James Cook University.

V

Vuppaladadiyam, Arun K., Antunes, Elsa, Vuppaladadiyam, Varsha S.S., Shehzad, Farrukh, Somasundaram, Murugavelh, Memon, Muhammad Z., Song, Qingbin, Dong, Weiguo, and Duan, Hubao (2022) Discernment of synergy during the co-pyrolysis of lipid-extracted microalgae and digested municipal solid waste: a thermogravimetric–mass spectrometric study. Journal of Chemical Technology and Biotechnology, 97 (2). pp. 490-500.

Vuppaladadiyam, Arun Krishna, Antunes, Elsa, Vuppaladadiyam, Sai Sree, Baig, Zenab Tariq, Subiantoro, Alison, Lei, Guoyuan, Leu, Shao-Yuan, Sarmah, Ajit K., and Duan, Huabo (2022) Progress in the development and use of refrigerants and unintended environmental consequences. Science of the Total Environment, 823. 153670.

Vuppaladadiyam, Arun K., Vuppaladadiyam, Varsha S.S., Antunes, Elsa, Baig, Zenab, Rehman, Shazia, Murugavelh, S., Leu, Shao-Yaun, and Sarmah, Ajit K. (2022) Pyrolysis of anaerobic digested residues in the presence of catalyst-sorbent bifunctional material: Pyrolysis characteristics, kinetics and evolved gas analysis. Bioresource Technology, 351. 127022.

Varsha, S.S.V., Vuppaladadiyam, Arun K., Shehzad, Farrukh, Ghaedi, Hosein, Murugavelh, S., Dong, Weiguo, and Antunes, Elsa (2021) Co-pyrolysis of microalgae and municipal solid waste: a thermogravimetric study to discern synergy during co-pyrolysis process. Journal of the Energy Institute, 94. pp. 29-38.

Vuppaladadiyam, Arun K., Antunes, Elsa, Sanchez, Paula Blanco, Duan, Huabo, and Zhao, Ming (2021) Influence of microalgae on synergism during co-pyrolysis with organic waste biomass: a thermogravimetric and kinetic analysis. Renewable Energy, 167. pp. 42-55.

Varsha, S. S. V., Soomro, Abdul F., Baig, Zenab T., Vuppaladadiyam, Arun K., Murugavelh, S., and Antunes, Elsa (2020) Methane production from anaerobic mono- and co-digestion of kitchen waste and sewage sludge: synergy study on cumulative methane production and biodegradability. Biomass Conversion and Biorefinery.

Vamvounis, George, Fuhrer, Marina, Keller, Kevin, Willig, Lukas, Koizumi, Ami, Hu, Hsuan-Ming, Gao, Mei, and Bell, Toby (2019) The effect of the phenylene linkage in poly(fluorene-alt-phenylene)s on the thermodynamics and kinetics of nitroaromatic and nitroaliphatic sensing. European Polymer Journal, 119. pp. 551-558.

Veerapen, Sonia, Wen, Huiqing, Li, Xingshuo, Du, Yang, Yang, Yong, Wang, Yiwan, and Xiao, Weidong (2019) A novel global maximum power point tracking algorithm for photovoltaic system with variable perturbation frequency and zero oscillation. Solar Energy, 181. pp. 345-356.

Virkutyte, Jurate, Rokhina, Ekaterina, Lens, Piet, and Jegatheesan, Veeriah (2011) The effect of electrodialytic treatment and Na2H2EDTA addition on methanogenic activity of copper-amended anaerobic granular sludge: treatment costs and energy consumption. Bioresource Technology, 102 (9). pp. 5541-5544.

Virkutyte, Jurate, Rokhina, Ekaterina, and Jegatheesan, Veeriah (2010) Optimisation of Electro-Fenton denitrification of a model wastewater using a response surface methodology. Bioresource Technology, 101 (5). pp. 1440-1446.

Vigneswaran, Saravanamuttu, Jegatheesan, Veeriah, and Keir, G. (2009) Deep Bed Filtration: modeling theory and practice. In: Vigneswaran, Saravanamuthu (Vigi) , (ed.) Waste Water Treatment Technologies. Encyclopedia of Life Support Systems (EOLSS) . EOLSS Publishers, Oxford, UK, - .

Virkutyte, Jurate, and Jegatheesan, Veeriah (2009) Electro-Fenton, hydrogenotrophic and Fe2+ ions mediated TOC and nitrate removal from aquaculture system: Different experimental strategies. Bioresource Technology, 100 (7). pp. 2189-2197.

Vigh, S.N., Sheehan, M.E., and Schneider, P.A. (2008) Isothermal drying of non-nucleated sugar syrup films. Journal of Food Engineering, 88 (4). pp. 450-455.

Visvanathan, C., Phong, D.D., and Jegatheesan, V. (2008) Hydrogenotrophic denitrification of highly saline aquaculture wastewater using hollow fiber membrane bioreactor. Environmental Technology, 29 (6). pp. 701-707.

Visvanathan, C., Hung, N.Q., and Jegatheesan, V. (2008) Hydrogenotrophic denitrification of synthetic aquaculture wastewater using membrane bioreactor. Process Biochemistry, 43 (6). pp. 673-682.

Visvanathan, C., Choudhary, M.K., Montalbo, M.T., and Jegatheesan, J. (2007) Landfill leachate treatment using thermophilic membrane bioreactor. Desalination, 204 (1-3). pp. 8-16.

Virkutyte, Jurate, and Sillanp¨���, Mika (2006) Chemical evaluation of potable water in Eastern Qinghai Province, China: Human health aspects. Environment International, 32 (1). pp. 80-86.

van Gool, Bronwyn, Karunasena, Karu, and Sivakugan, Siva (2006) Modelling the effects of blasting on paste fill. In: Computational Methods. pp. 695-700. From: ICCM04 First International Conference on Computational Methods, 15-17 December 2004, Singapore.

Visvanathan, C., Thu, L.N., Jegatheesan, V., and Anotai, J. (2005) Biodegradation of pentachlorophenol in a membrane bioreactor. Desalination, 183 (1-3). pp. 455-464.

Virkutyte, Jurate (2005) Copper and chromium electrodialytic migration in CCA-Treated timber waste. Water, Air and Soil Pollution, 160 (1-4). pp. 27-39.

Virkutyte, Jurate (2005) Copper and trace metal fractionation in sludge. Environmental Pollution, 138 (3). pp. 517-528.

Virkutyte, Jurate (2002) Electrokinetic treatment overview 2002, science of the total environment. Science of the Total Environment, 289 (1-3). pp. 97-121.

Vu, T.T.L., and Schneider, P.A. (2002) Improved control of an industrial sugar crystalliser: a dynamic optimisation approach. In: Proceedings of the 35th European Symposium of the Working Party on Computer Aided Process Engineering- 12 (ESCAPE-12) (10) pp. 571-576. From: ESCAPE-12, 26-29 May 2002, The Hague, Netherlands.

Visvanathan, Chettiyappan, Boonthanon, Natapol, Sathasivan, Arumugam, and Jegatheesan, Veeriah (2002) Pretreatment of seawater for biodegradable organic content removal using membrane bioreactor. Desalination, 153 (1-3). pp. 133-140.

Vucko, Matthew John (2008) The dynamics of water on the skin of Australian carphodactyline and diplodactyline geckos. Masters (Research) thesis, James Cook University.

W

Wheatley, Greg, and Popoola, Samuel (2020) On the design of rear uprights for a race car. Research on Engineering Structures & Materials. (In Press)

Wheatley, Greg, and Zaeimi, Mohammad (2022) Front impact attenuator design for a race car. International Journal of Crashworthiness, 27 (2). pp. 466-475.

Wheatley, G., Branco, R., Correia, José A.F.O., Martins, R.F., Macek, W., Marciniak, Z., and Szala, M. (2022) Influence of Heat Treatment Temperature on Fatigue Toughness in Medium-Carbon High-Strength Steels. In: Structural Integrity (24) pp. 283-289. From: 20th International Colloquium on Mechanical Fatigue of Metals, 15-17 Sep 2021, Wroclaw, Poland.

Wang, Bing, Xiang, Wei, Wang, Eric, Peng, Qiang, Gao, Pan, and Wu, Xiao (2022) Learning-based high-efficiency compression framework for light field videos. Multimedia Tools and Applications, 81 (6). pp. 7527-7560.

Wang, Bing, Peng, Qiang, Wang, Eric, Xiang, Wei, and Wu, Xiao (2022) User-dependent interactive light field video streaming system. Multimedia Tools and Applications, 81. pp. 1893-1918.

Wheatley, G., Babamiri, A, and Philippa, B. (2022) Vibration analysis of an Airlie Beach house: a case study in Australia. Scientific Journal of Silesian University of Technology. Series transport, 114. pp. 179-192.

Wheatley, Greg, and Rubel, Robiul Islam (2021) Analysis of conveyor drive power requirements in the mining industry. Acta Logistica, 8 (1). pp. 37-43.

Wheatley, Greg, and Popoola, Samuel (2021) Autonomous transmission control of a 2017 Yamaha Grizzly 700 all-terrain vehicle. Scientific Journal of Silesian University of Technology. Series transport, 110. pp. 183-198.

Wheatley, Greg, and Zaeimi, Mohammad (2021) Composite shaftless roller design for conveyor system. Periodica Polytechnica Mechanical Engineering, 65 (3). pp. 261-268.

Waqas, Muhammad, Ahmed, Toqeer, Elavarasan, Rajvikram Madurai, Waqar, Asad, Leong, Kenneth, Pugazhendhi, Rishi, Das, Narottam, and Jeelani, Muhammad Waqas (2021) DQ Transformation Based Control of Single-Phase Grid-Tied Inverter. In: Proceedings of the 31st Australasian Universities Power Engineering Conference. From: AUPEC 2021: 31st Australasian Universities Power Engineering Conference, 26-30 September 2021, Perth, WA, Australia.

Wen, Haoran, Du, Yang, Chen, Xiaoyang, Lim, Enggee, Wen, Huiqing, Jiang, Lin, and Xiang, Wei (2021) Deep learning-based multi-step solar forecasting for PV ramp-rate control using sky images. IEEE Transactions on Industrial Informatics, 17 (2). pp. 1397-1406.

Wheatley, Greg, and Islam, Robiul Islam (2021) Design improvement of a laboratory prototype for efficiency evaluation of solar thermal water heating system using phase change material (PCMs). Results in Engineering, 12. 100301.

Wheatley, Greg, Popoola, Sam, and Collins, Jayke (2021) Design, optimization, and analysis of the chassis of a racecar. SAE Technical Papers. 2021-01-5058.

Wheatley, G., and Ali, A. (2021) Designing an upper stage steering system for a formula FSAE car. Scientific Journal of Silesian University of Technology. Series transport, 113. pp. 205-218.

Wheatley, Greg, and Keipour, Soheil (2021) FEA of conveyor belt splice cord end conditions. UPB Scientific Bulletin, Series D: Mechanical Engineering, 83 (3). pp. 205-216.

Wheatley, Greg, and Zaeimi, Mohammad (2021) On the design of a wheel assembly for a race car. Results in Engineering, 11. 100244.

Wheatley, Greg, and Ali, Ahmed (2021) Shifter mechanism design for FSAE motor sports vehicle JCU. Scientific Journal of Silesian University of Technology. Series transport, 113. pp. 219-229.

Wheatley, Greg, Rains, Ashley, and Zaeimi, Mohammad (2021) A compact and portable design development of a low rolling resistance test rig. Acta Logistica, 8 (4). pp. 369-379.

Wheatley, Greg, Gangemi, Darrin, Toogood, Jarod, and Sachini Sandeepa Chandrasiri, Rendage (2020) Analyzing suspension upright of a formula society of automotive engineers style vehicle. Technical University of Varna. Annual Journal, 4 (2). pp. 91-99.

Wheatley, G. (2020) Design of a hydraulically controlled conveyor belt clamp for heavy-duty drift belt installation in underground applications: a case study. Journal of Structural Integrity and Maintenance, 5 (3). pp. 171-182.

Wheatley, Greg, and Chandrasiri, Rendage Sachini Sandeepa (2020) Design of an emergency conveyor belt clamp for heavy duty drift belt installation in underground applications: a case study. Iberoamerican Journal of Industrial Engineering, 12 (24). pp. 34-52.

Wheatley, G., Lane, B., and Chandrasiri, R.S.S. (2020) Designing of a rear suspension for a race car. SAE Technical Papers. 5088.

Wang, E., Attard, S., Linton, A., McGlinchey, M., Xiang, W., Philippa, B., and Everingham, Y. (2020) Development of a closed-loop irrigation system for sugarcane farms using the Internet of Things. Computers and Electronics in Agriculture, 172. 105376.

Wheatley, Greg, Situ, Rong, Dwyer, Jarrod, Larsen, Alexander, and Rubel, Robiul Islam (2020) Dryer design parameters and parts specifications for an industrial scale bagasse drying system / Parámetros de diseño del secador y especificaciones de piezas para un sistema de secado de bagazo a escala industrial. Acta Agronómica, 69 (4). pp. 293-305.

Walker, Craig, Cole, Andrew, Antunes, Elsa, and Sheehan, Madoc (2020) Equilibrium moisture and drying kinetics modelling of macroalgae species Ulva ohnoi and Oedogonium intermedium. Clean Technologies, 2 (2). pp. 225-239.

Wheatley, Greg, Situ, Rong, Gangemi, Darrin, and Keipour, Soheil (2020) Investigation of take-up structure design under steady and non-steady conditions. Iberoamerican Journal of Industrial Engineering, 12 (24). pp. 92-129.

Wheatley, Greg, and Sachini Sandeepa Chandrasiri, Rendage (2020) Mechanical testing of recycled HDPE extruded hollow section. Annual Journal of Technical University of Varna, 4 (2). pp. 112-121.

Wei, Peng, Xiao, Yue, Dan, Lilin, Ge, Lijun, and Xiang, Wei (2020) N-Continuous Signaling for GFDM. IEEE Transactions on Communications, 68 (2). pp. 947-958.

Wheatley, Greg (2020) On the design of racing car suspension. International Journal on Interactive Design and Manufacturing, 14 (3). pp. 1003-1013.

Wheatley, Greg, Campbell, Caitlin, and Moore, Ben (2020) On the design of the steering and front uprights for a race car. Mobility & Vehicle Mechanics, 46 (1). pp. 13-29.

Wheatley, Greg (2019) Analysis of catastrophically failed industrial bolt. Journal of Material Sciences & Engineering, 8 (1). 1000514.

Wibowo, David, Zhao, Chun-Xia, and He, Yinghe (2019) Fluid properties and hydrodynamics of microfluidic systems. In: Santos, Hélder A., Liu, Dongfei, and Zhang, Hongbo, (eds.) Microfluidics for Pharmaceutical Applications: from nano/micro systems fabrication to controlled drug delivery. Elsevier, Oxford, United Kingdom, pp. 37-77.

Wang, Xiao, Zhang, Dingdong, Jin, Hui, Poliquit, Beta Zenia, Philippa, Bronson, Nagiri, Ravi Chandra Raju, Subbiah, Jegadesan, Jones, David J., Ren, Wencai, Du, Jinhong, Burn, Paul L., and Yu, Junsheng (2019) Graphene‐based transparent conducting electrodes for high efficiency flexible organic photovoltaics: elucidating the source of the power losses. Solar RRL, 3. 1900042.

Woodland, Walmiria, Lim, Richard, Motti, Cherie, Irving, Paul, Wang, Jun, Payne, Mark, Junk, Peter C., and Vamvounis, George (2019) Oil spill source identification using colorimetric detection. Australian Journal of Chemistry, 72 (11). pp. 874-880.

Wang, Bing, Peng, Qiang, Wang, Eric, Han, Kang, and Xiang, Wei (2019) Region-of-interest compression and view synthesis for light field video streaming. IEEE Access, 7. pp. 41183-41192.

Wang, E., Attard, S., McGlinchey, M., Xiang, W., Philippa, B., Linton, A.L., and Everingham, Y. (2019) Smarter irrigation scheduling in the sugarcane farming system using the Internet of Things. In: Proceedings of the 41st Annual Conference of the Australian Society of Sugar Cane Technologists (41) pp. 164-170. From: ASSCT 2019: 41st Annual Conference of the Australian Society of Sugar Cane Technologists, 30 April - 3 May 2019, Toowoomba, QLD, Australia.

Wheatley, Greg (2018) Design of a 10T Flake Pile Roller Stand. Industrial Engineering & Management, 7 (4). 1000275.

Wheatley, Greg (2018) Design of a conveyor belt turning frame. Industrial Engineering & Management, 7 (4). 1000274.

Wheatley, Greg (2018) Design of industrial lifting crate rated for 1 tonne load. Industrial Engineering & Management, 7 (4). 1000273.

White, R.D., Cocks, D., Boyle, G., Casey, M., Garland, N., Konovalov, D., Philippa, B., Stokes, P., de Urquijo, J., González-Magaña, O., McEachran, R.P., Buckman, S.J., Brunger, M.J., Garcia, G., Dujko, S., and Petrovic, Z.Lj. (2018) Electron transport in biomolecular gaseous and liquid systems: theory, experiment and self-consistent cross-sections. Plasma Sources Science and Technology, 27 (5).

Wang, E., Attard, S., Everingham, Y., Philippa, B., and Xiang, W. (2018) Internet of things for smarter irrigation in Australian sugarcane. International Sugar Journal, 120. 1437. pp. 698-702.

Wang, E., Attard, S., Everingham, Y., Philippa, B., and Xiang, W. (2018) Smarter irrigation management in the sugarcane farming system using internet of things. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists (40) pp. 117-122. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

Wang, Zhongbing, Peng, Bing, Zhang, Lifeng, Zhao, Zongwen, Liu, Degang, Peng, Ning, Wang, Dawei, He, Yinghe, Liang, Yanjie, and Liu, Hui (2018) Study on formation mechanism of fayalite (Fe2SiO4) by solid state reaction in sintering process. JOM, 70 (4). pp. 539-546.

Wang, Bing, Peng, Qiang, Wu, Xiao, Wang, Eric, and Xiang, Wei (2018) An interactive light field video system with user-dependent view selection and coding scheme. In: Lecture Notes in Computer Science (11165) pp. 727-736. From: PCM 2018: Pacific Rim Conference on Multimedia, 21-22 September 2018, Hefei, China.

Wang, Bing, Peng, Qiang, Wu, Xiao, Wang, Eric, and Xiang, Wei (2018) A novel no-reference QoE assessment model for frame freezing of mobile video. In: Lecture Notes in Computer Science (11166) pp. 156-165. From: PCM 2018: Pacific Rim Conference on Multimedia, 21-22 September 2018, Hefei, China.

Wang, Yong, Ma, Lin, Xu, Yubin, and Xiang, Wei (2017) Computationally efficient energy optimization for cloud radio access networks with CSI uncertainty. IEEE Transactions on Communications, 65 (12). pp. 5499-5513.

Wen, Huiqing, Zheng, Kai, and Du, Yang (2017) Hierarchical coordinated control for DC microgrid with crowbar and load shedding control. In: Proceedings of the IEEE 3rd International Future Energy Electronics Conference and ECCE Asia. pp. 2208-2212. From: IFEEC 2017 - ECCE Asia: IEEE 3rd International Future Energy Electronics Conference, 3-7 June 2017, Kaohsiung, Taiwan.

Wei, Peng, Dan, Lilin, Xiao, Yue, Xiang, Wei, and Li, Shaoqian (2017) Time-domain N-continuous OFDM: system architecture and performance analysis. IEEE Transactions on Vehicular Technology, 66 (3). pp. 2394-2407.

Wang, Gengkun, Xiang, Wei, Pickering, Mark, and Chen, Chang Wen (2016) Light field multi-view video coding with two-directional parallel inter-view prediction. IEEE Transactions on Image Processing, 25 (11). pp. 5104-5117.

Williamson, N., Armfield, S.W., Lin, Wenxian, and Kirkpatrick, M.P. (2016) Stability and Nusselt number scaling for inclined differentially heated cavity flow. International Journal of Heat and Mass Transfer, 97. pp. 787-793.

Wu, Shuang, Xiang, Wei, Wang, Zhenyong, Li, Dezhi, and Guo, Qing (2016) Staged growth codes: intermediate performance and overhead analysis. IEEE Communications Letters, 20 (8). pp. 1503-1506.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2016) Vertical stress isobars for silos and square backfilled mine stopes. International Journal of Geomechanics, 16 (2). 06015003.

Wang, Ning, Zhou, Yuan, and Xiang, Wei (2016) An energy efficient clustering protocol for lifetime maximization in wireless sensor networks. In: Proceedings of the IEEE Global Communications Conference. From: GLOBECOM 2016: IEEE Global Communications Conference, 4-8 December 2016, Washington, DC, USA.

Walter, R., and Mathan, M. Bobby (2015) A mechanistic in vitro study of the microgalvanic degradation of secondary phase particles in magnesium alloys. Journal of Biomedical Materials Research Part A, 103 (3). pp. 990-1000.

Williamson, N., Armfield, S.W., Kirkpatrick, M.P, and Lin, Wenxian (2015) Bifurcation of natural convection flow in an inclined differentially heated closed square cavity. Computational Thermal Sciences, 7 (5-6). pp. 417-425.

Wang, Vincent Z., and Ong, K.C.G. (2015) Nonparametric statistical formulations for structural health monitoring. Computers and Structures, 148. pp. 63-74.

Walsh, Matthew, and Lin, Wenxian (2015) A parametric study on the thermal performance of unglazed solar water collectors with their colorbond steel absorber plates also used as roofs. International Journal of Green Energy, 12 (12). pp. 1309-1322.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2014) Vertical stresses within granular materials in containments. International Journal of Geotechnical Engineering, 8 (4). pp. 431-435.

Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2014) Influence of the cathodic activity of magnesium alloys on the electrochemical deposition of calcium phosphate. Materials Letters, 130. pp. 184-187.

Wang, Vincent Z., and Sivakugan, Siva (2014) Time-invariant and time-variant reliability analyses of reinforced concrete systems with appraisal data missingness. ACI Structural Journal, 111 (5). pp. 1167-1178.

Widisinghe, S.D., Sivakugan, N., and Wang, V.Z. (2014) Loads on barricades in hydraulically backfilled underground mine stopes. In: Proceedings of the 11th International Symposium on Mining with Backfill. pp. 123-134. From: Mine Fill 2014: 11th International Symposium on Mining with Backfill, 20-22 May 2014, Perth, WA, Australia.

Wang, Vincent Z., and Sivakugan, Nagaratnam (2014) An expectation-maximization algorithm embedded framework for safety assessment of RC systems. ACI Structural Journal, 111 (3). 12-204. pp. 515-524.

Walsh, Christian, and Wang, Vincent Z. (2014) Towards the reliability quantification of recyclable precast concrete elements and sub-assemblies: a feasibility exploration of the application of an expectation-maximization algorithm embedded safety assessment technique. In: Proceedings of 2014 International Conference on Intelligent Green Building and Smart Grid. pp. 1-4. From: IGBSG 2014: 1st International Conference on Intelligent Green Building and Smart Grid, 23-25 April 2014, Taipei, Taiwan.

Wang, Guan-long, Gao, Wen-feng, Liu, Tao, and Lin, Wen-xian (2014) Development of automatic test system for thermal performance of all-glass heat pipe evacuated solar collector tube. Journal of Yunnan Normal University, 34 (4). pp. 25-29.

Wang, Vincent Z., and Ginger, John D. (2014) Maximum a posteriori estimation based wind fragility analysis with application to existing linear or hysteretic shear frames. Structural Engineering and Mechanics, 50 (5). pp. 653-664.

Wang, Vincent Z., Mallett, Michael, and Priory, Andrew (2014) Seismic fragility evaluation with incomplete structural appraisal data: an iterative statistical approach. Journal of Structural Engineering, 140 (2). 04013048. pp. 1-13.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2014) Vertical stress isobars for trenches and mine stopes containing granular backfills. International Journal of Geomechanics, 14 (2). pp. 313-318.

Wang, Vincent Z., and Lyons, Emma (2013) Large-sample normal approximation and relevant sensitivity in linear seismic fragility analysis with hierarchically modeled stiffness properties. Probabilistic Engineering Mechanics, 34. pp. 91-100.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) Evaluation of wind fragilities of existing multi-story shear frames using maximum a posteriori estimation. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics. pp. 796-804. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Wang, Vincent Z., Ginger, John D., and Henderson, David J. (2013) A surrogate model for a type of nonlinear hysteretic system with application to wind response analysis. In: Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics. pp. 2816-2823. From: ASEM 2013: World Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.

Widisinghe, Sankha, Sivakugan, Nagaratnam, and Wang, Vincent Z. (2013) Laboratory investigations of arching in backfilled mine stopes. In: 2013 Geotechnical Society of Singapore (GeoSS). pp. 741-746. From: 18th Southeast Asian Geotechnical Conference Cum Inaugural Agssea Conference, 29-31 May 2013, Singapore.

Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2013) Effect of surface roughness on the in vitro degradation behaviour of a biodegradable magnesium-based alloy. Applied Surface Science, 279. pp. 343-348.

Walter, Rhys, Mehjabeen, Afrin, Gordon, Timothy, and Kannan, M. Bobby (2013) precipitation of struvite on pure magnesium and in vitro degradation behaviour. In: Proceedings of the CHEMECA 2013. 30562. From: CHEMECA 2013, 29 September - 2 October 2013, Brisbane, QLD, Australia.

Widisinghe, Sankha, and Sivakugan, Nagaratnam (2012) Vertical stresses within granular materials in silos. In: ANZ 2012 Conference Proceedings. pp. 590-595. From: Ground Engineering in a Changing World: 11th Australia - New Zealand Conference on Geomechanics, 15-18 July 2012, Melbourne, Australia.

Wei, Shengxian, Li, Ming, Lin, Wenxian, Ji, Xu, Yu, Qiongfen, Luo, Xi, and Long, Xing (2012) Mass area ratio of solar hot water systems integrated with so[u]th-facade of high-rise residential buildings. Acta Energiae Solaris Sinica, 33 (4). 0254-0096. pp. 663-669.

Wang, Vincent Z., Ginger, John D., and Narayan, Krishneel (2012) Intralaminar and interlaminar fracture characterization in glued-laminated timber members using image analysis. Engineering Fracture Mechanics, 82. pp. 73-84.

Wang, Vincent Z., Pease, Trent, and Robinson, Sean (2012) Implications of selected parameter estimation schemes to reinforced concrete member reliability analysis with incomplete structural appraisal data. In: Proceedings of the 37th Conference on Our World in Concrete & Structures. 100037044. pp. 435-442. From: The 37th Conference on Our World in Concrete & Structures, 29-31 August 2012, Singapore.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta A., Watson, Gregory S., and Yin, Ling (2012) Nanoscale study of cartilage surfaces using atomic force microscopy. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (12). pp. 899-910.

Wei, Shengxian, Sun, Yanlin, Li, Ming, Lin, Wenxian, Zhao, Derong, Shi, Youming, and Yang, Huimin (2011) Indoor thermal environment evaluations and parametric analyses in naturally ventilated buildings in dry season using a field survey and PMVe-PPDe model. Building and Environment, 46 (6). pp. 1275-1283.

Walter, R., and Kannan, M. Bobby (2011) Influence of surface roughness on the corrosion behaviour of magnesium alloy. Materials & Design, 32 (4). pp. 2350-2354.

Williamson, Nicholas, Armfield, Steven W., and Lin, Wenxian (2011) Forced turbulent fountain flow behaviour. Journal of Fluid Mechanics, 671. pp. 535-558.

Walter, R., and Kannan, M. Bobby (2011) In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Materials Letters, 65 (4). pp. 748-750.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta, Watson, Gregory, Morris, B.N, and Rayner, B.A. (2011) Atomic force microscopy investigation on Young's modulus of cartilage for osteoarthritis study. In: Mathew, Joseph, Ma, Lin, Tan, Andy, Weijnen, Margot, and Lee, Jay, (eds.) Engineering asset management and infrastructure sustainability. WorId Congress on Engineering Asset Management . Springer, London, pp. 1019-1025.

Williams, John R., Holmes, David, and Tilke, Peter (2011) Parallel computation particle methods for multi-phase fluid flow with application oil reservoir characterization. In: Oñate, Eugenio, and Owen, Roger, (eds.) Particle-Based Methods: fundamentals and applications. Computational Methods in Applied Sciences, 25 . Springer, Dordrecht, The Netherlands, pp. 113-134.

Wei, Shengxian, Li, Ming, Ji, Xu, Lin, Wenxian, Zheng, Tufeng, Li, Guoliang, and Luo, Xi (2010) Aspect ratio and spacing optimization of a solar flat-plate collector unit. Transactions of the Chinese Society of Agricultural Engineering (CSAE), 26 (11). pp. 225-230.

Wang, Liuling, Xu, Yongfeng, Li, Ming, Xiang, Ming, Wang, Yunfeng, Lin, Wenxian, and Wei, Shengxian (2010) The experimental study of trough concentrating solar photovoltaic/thermal system. Acta Energiae Solaris Sinica, 31 (9). pp. 1154-1160.

Wang, Yuanfang, Shu, Li, Jegatheesan, Veeriah, and Gao, Baoyu (2010) Removal and adsorption of diuron through nanofiltration membrane: the effects of ionic environment and operating pressures. Separation and Purification Technology, 74 (2). pp. 236-241.

Williamson, N., Armfield, S.W., and Lin, Wenxian (2010) Entrainment in turbulent fountain flow. In: Proceedings of the 17th Australasian Fluid Mechanics Conference. pp. 1-4. From: 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand.

Wang, Yuanfang, Shu, Li, Jegatheesan, Veeriah, and Gao, Baoyu (2009) Coagulation and nano-filtration: a hybrid system for the removal of lower molecular weight organic compounds (LMWOC). Desalination and Water Treatment, 11 (1). pp. 23-31.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2009) Shape of a particle curtain falling in stagnant air. Powder Technology, 192 (3). pp. 384-388.

Walker, Rohan, Indraratna, Buddhima, and Sivakugan, Nagaratnam (2009) Vertical and radial consolidation analysis of multilayered soil using the spectral method. Journal of Geotechnical and Geoenvironmental Engineering, 135 (5). pp. 657-663.

Wang, Yan, Xu, Xiuming, Jegatheesan, Jega, and Gao, Baoyu (2009) Effect of coagulants categories on the fouling and performance of ultrafiltration (UF) membrane. Desalination and Water Treatment, 11 (1-2). pp. 32-37.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2008) Behaviour of a curtain of particles falling through a horizontally-flowing gas stream. Powder Technology, 188 (2). pp. 110-118.

Williamson, N., Armfield, S.W., and Lin, W. (2008) Direct numerical simulation of turbulent intermediate Froude number fountain flow. ANZIAM Journal, 50. pp. 16-30.

Williamson, N., Srinarayana, N., Armfield, S.W., McBain, G.D., and Lin, W. (2008) Low-Reynolds-number fountain behaviour. Journal of Fluid Mechanics, 608. pp. 297-317.

Wadhwa, Lal C. (2008) Developing programs for sustainable transportation through community-based social marketing. In: Proceedings of the International Conference on Transportation Planning and Implementation Methodologies for Technology. From: TPMDC 2014: International Conference on Transportation Planning and Implementation Methodologies for Technology , 3-6 December 2008, Mumbai, India.

Williamson, N., Srinarayana, N., Armfield, S.W., McBain, G., and Lin, W. (2007) Characterisation of Low Reynolds Number Fountain Behaviour. In: Proceedings of the Sixteenth Australasian Fluid Mechanics Conference. pp. 699-703. From: 16th Australasian Fluid Mechanics Conference, 3-7 December 2007, Gold Coast, Australia.

Wei, Riyu, Zhang, Sheng, Karunasena, Warna, Sivakugan, Siva, and Zhang, Hongguang (2007) Blast simulation in underground mines using the combined finite-discrete element method. In: Proceedings of the 7th WSEAS International Conference on Simulation, Modelling and Optimization. pp. 257-262. From: 7th WSEAS International Conference on Simulation, Modelling and Optimization, 15-17 September 2007, Beijing, China.

Willis, Simon, and Kikkert, Cornelis Jan (2007) Radio propagation model for long-range wireless sensor networks. In: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007. From: Sixth International Conference on Information, Communications and Signal Processing, ICICS 2007, 10-13 Dec 2007, Singapore.

Willis, Simon, and Kikkert, Cornelius J. (2006) Design of a long-range wireless sensor node. In: Proceedings of the 2006 IEEE Asia Pacific Conference on Circuits and Systems. pp. 151-154. From: 2006 IEEE Asia Pacific Conference on Circuits and Systems, 4-7 December 2006, Singapore.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2006) Quantitative characterization of collagen orientation in the superficial zone for studying early degenerative changes in articular cartilage. Journal of Musculoskeletal Research, 10 (1). pp. 1-12.

Wadhwa, L.C., and Thomson, M. (2006) Relative safety of alternative intersection designs. In: Brebbia, C.A., and Dolezel, V., (eds.) Urban Transport XII: urban transport and the environment in the 21st century. WIT Press, Southhampton, UK, pp. 379-388.

Wadhwa, Lal C. (2005) Enhancing urban sustainability through integrated transport planning in three largest Australian cities. In: Brebbia, C.A., and Wadhwa, L.C., (eds.) Urban Transport XI: urban transport and the environment in the 21st Century. Advances in Transport, 77 . WIT Press, Southampton, UK, pp. 333-342.

Wadhwa, L.C. (2005) Financing of the transport infrastructure in Australia. In: Brebbia, C.A., and Wadhwa, L.C., (eds.) Urban Transport XI: urban transport and the environment in the 21st century. WIT Transactions on The Built Environment, 77 . WIT Press, Ashurst, UK, pp. 861-872.

Willis, Simon L., and Kikkert, Cornelis J. (2005) Radio propagation model for long-range Ad-hoc wireless sensor network. In: Proceedings of the 2005 International Conference on Wireless Networks, Communications and Mobile Computing (1) pp. 1-6. From: 2005 International Conference on Wireless Networks, Communications and Mobile Computing, 13 - 16 June 2005, Maui, Hawaii.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2005) Utilization of two-dimensional fast Fourier transform and power spectral analysis for assessment of early degeneration of articular cartilage. Journal of Musculoskeletal Research, 9 (3). pp. 119-131.

Wadhwa, Lal C. (2004) Achieving sustainability through integrated transport and land use planning in the three largest Australian cities. In: Proceedings of the 27th Australasian Transport Research Forum. pp. 1-10. From: 27th Australasian Transport Research Forum, 29 September - 1 October 2004, Adelaide, SA, Australia.

Wadhwa, Lal C., and Bancroft, Michael D. (2004) Comfort level of cyclists at roundabouts. In: Proceedings of the 2004 Road Safety Research, Policing and Education Conference. pp. 1-13. From: Road Safety Research, Policing and Education Conference, 14 - 16 November 2004, Perth, WA, Australia.

Wadhwa, Lal C. (2003) Comfort level of cyclists at intersections. In: Proceedings of the 26th Australasian Transport Research Forum 2003. From: 26th Australasian Transport Research Forum 2003, 1-3 October 2003, Wellington, New Zealand.

Wadhwa, Lal (2003) Low cost infrastructure solutions for bicycle safety. In: Proceedings of 21st ARRB and 11th REAA Conference. pp. 1-9. From: 21st ARRB and 11th REAAA Conference, 18-23 May 2003, Cairns, QLD, Australia.

Wadhwa, Lal C. (2003) Surface transport capacity at a port: case of a coal export terminal. In: Proceedings of the 16th Australasian Coastal and Ocean Engineering Conference 2003. pp. 1-9. From: Coastal Development - A Quest for Excellence, 9-12 September 2003, Auckland, New Zealand.

Wadhwa, L.C., and Wirasinghe, S.C. (2003) True cost of road travel. In: Sucharov, L.J., and Brebbia, C.A., (eds.) Urban Transport IX: urban transport and the environment in the 21st century. WIT Press, Southhampton, UK, pp. 525-534.

Wadhwa, L. C. (2001) Road safety through road design improvements. In: Australasian Transport Research Forum: 24th. From: ATRF01, 17- 20 April 2001, Hobart, Tasmania.

Wadhwa, Lal C. (2000) Optimizing deployment of shiploaders at bulk export terminal. Journal of Waterway Port, Coastal and Ocean Engineering, 126 (6). pp. 297-304.

Wosik, J., Xie, L-M., Mazierska, J., and Grabovickic, R. (1999) Influence of columnar defects on surface resistance of YBa2Cu3Ox superconducting thin films; nonlinear effects. Applied Physics Letters, 75 (12). pp. 1781-1783.

Walter, Rhys (2015) Understanding and improving the degradation behaviour of magnesium-based biomaterials. PhD thesis, James Cook University.

X

Xu, Yi, Han, Kang, Zhou, Yongming, Wu, Jian, Xie, Xin, and Xiang, Wei (2022) Classification of Diabetic Foot Ulcers Using Class Knowledge Banks. Frontiers in Bioengineering and Biotechnology, 9. 811028.

Xiong, Weiyi, Liu, Jianan, Xia, Yuxuan, Huang, Tao, Zhu, Bing, and Xiang, Wei (2022) Contrastive Learning for Automotive mmWave Radar Detection Points Based Instance Segmentation. In: Proceedings of the IEEE 25th International Conference on Intelligent Transportation Systems. pp. 1255-1261. From: ITSC 2022: IEEE 25th International Conference on Intelligent Transportation Systems, Macau, China, 8-12 October 2022.

Xiao, Yuan, and Lin, Wenxian (2022) Linear temporal stability analysis on cross sheared flow: the stabilization effects via cross shear. Physics of Fluids, 34. 034101.

Xiao, Yuan, Lin, Wenxian, and Ding, Junling (2022) Linear temporal stability analysis on the inviscid sheared convective boundary layer flow. Physics of Fluids, 34. 114119.

Xu, Yi, Han, Kang, Zhou, Yongming, Wu, Jian, Xie, Xin, and Xiang, Wei (2021) Deep adaptive blending network for 3D magnetic resonance image denoising. IEEE Journal of Biomedical and Health Informatics, 25 (9). pp. 3321-3331.

Xiao, Yuan, and Lin, Wenxian (2021) Linear temporal stability analysis on non-parallel free cross sheared flow with a primary hyperbolic velocity and an orthogonal Bickley jet velocity. Physics of Fluids, 33. 124101.

Xia, Yaowen, Lin, Wenxian, Gao, Wenfeng, Liu, Tao, Li, Qiong, and Li, Anran (2020) Experimental and numerical studies on indoor thermal comfort in fluid flow: a case study on primary school classrooms. Case Studies in Thermal Engineering, 19. 100619.

Xiao, Yu, Wang, Yafeng, and Xiang, Wei (2019) Dimension-deficient channel estimation of hybrid beamforming based on compressive sensing. IEEE Access, 7. pp. 13791-13798.

Xiang, Wei, Huang, Tao, and Wan, Wanggen (2019) Machine learning based optimization for vehicle-to-infrastructure communications. Future Generation Computer Systems, 94. pp. 488-495.

Xie, Huiqiang, Xu, Weiyang, Xiang, Wei, Shao, Ke, and Xu, Shengbo (2019) Non-coherent massive SIMO systems in ISI channels: constellation design and performance analysis. IEEE Systems Journal, 13 (3). pp. 2252-2263.

Xie, Huiqiang, Xu, Weiyang, Xiang, Wei, Li, Bing, and Wang, Rui (2019) Performance of ED-based non-coherent massive SIMO systems in correlated Rayleigh fading. IEEE Access, 7. pp. 14058-14069.

Xiao, Yue, Yu, Feng, Lei, Xia, He, Dongxiao, Yang, Ping, and Xiang, Wei (2018) Performance analysis for the N-continuous precoded SM-OFDM system. IEEE Transactions on Vehicular Technology, 67 (1). pp. 483-493.

Xiao, Yanping, Tang, Wanbin, Xiao, Yue, Zhang, Hongyan, Wu, Gang, and Xiang, Wei (2018) Directional modulation with cooperative receivers. IEEE Access, 6. pp. 34992-35000.

Xiao, Yue, Li, Xun, Wei, Peng, Xiao, Lixia, and Xiang, Wei (2018) Hybrid prefix OFDM transmission toward future wireless communications. IEEE Access, 6. pp. 22341-22352.

Xiao, Lixia, Yang, Ping, Xiao, Yu, Fan, Shiwen, Di Renzo, Marco, Xiang, Wei, and Li, Shaoqian (2017) Efficient compressive sensing detectors for generalized spatial modulation systems. IEEE Transactions on Vehicular Technology, 66 (2). pp. 1284-1298.

Xu, Weiyang, Xiang, Wei, Jia, Yunjian, Li, Youjun, and Yang, Yi (2017) Downlink performance of massive-MIMO systems using EVD-based channel estimation. IEEE Transactions on Vehicular Technology, 66 (4). pp. 3045-3058.

Xiang, Wei, Zheng, Kan, Niyato, Dusit, Militano, Leonardo, and Araniti, Giuseppe (2017) Editorial of ETT special issue: emerging topics in device to device communications as enabling technology for 5G systems. Transactions on Emerging Telecommunications Technologies, 28 (2). e3023.

Xiai, Lixia, Xiao, Yue, Yang, Ping, Liu, Jiang, Li, Shaoqian, and Xiang, Wei (2017) Space-time block coded differential spatial modulation. IEEE Transactions on Vehicular Technology, 66 (10). pp. 8821-8834.

Xiao, Lixia, Xiao, Yue, Zhao, Yan, Yang, Ping, Di Renzo, Marco, Li, Shaoqian, and Xiang, Wei (2017) Time-domain turbo equalization for single-carrier generalized spatial modulation. IEEE Transactions on Wireless Communications, 16 (9). pp. 5702-5716.

Xiang, Wei, Wang, Ning, and Zhou, Yuan (2016) An energy-efficient routing algorithm for software-defined wireless sensor network. IEEE Sensors Journal, 16 (20). pp. 7393-7400.

Xu, Weiyang, Xiang, Wei, Elkashlan, Maged, and Mehrpouyan, Hani (2016) Spectrum sensing of OFDM signals in the presence of carrier frequency offset. IEEE Transactions on Vehicular Technology, 65 (8). pp. 6798-6803.

Xiang, Wei, Zheng, Kan, and Shen, Xuemin (2016) 5G Mobile Communications. Springer, Cham, Switzerland.

Xiong, Xiong, Hou, Lu, Zheng, Kan, Xiang, Wei, Hossain, M. Shamim, and Rahman, Sk Md Mizanur (2016) SMDP-based radio resource allocation scheme in software-defined Internet of Things networks. IEEE Sensors Journal, 16 (20). pp. 7304-7314.

Xiao, Y., Lin, W., McCormack, J., He, Y., Armfield, S.W., and Kirkpatrick, M.P. (2015) Turbulent mixing in cross sheared stratified flow. In: Proceedings of the 9th Symposium on Turbulence and Shear Flow Phenomena. 4C-5. pp. 1-6. From: TSFP-9: 9th Symposium on Turbulence and Shear Flow Phenomena, 30 June - 3 July 2015, Melbourne, VIC, Australia.

Xiao, Y., Lin, W., He, Y., Armfield, S.W., and Kirkpatrick, M.P. (2015) Hydrodynamic stability analysis of sheared convective boundary layer flows in stratified environments. In: Proceedings of the 9th Symposium on Turbulence and Shear Flow Phenomena. P-51. pp. 1-6. From: TSFP-9: 9th Symposium on Turbulence and Shear Flow Phenomena, 30 June - 3 July 2015, Melbourne, VIC, Australia.

Xiao, Y., Lin, W., McCormack, J., Armfield, S.W., Kirkpatrick, M.P., and He, Y. (2014) Coherent structures in cross sheared flows in weakly stratified environments. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. 84. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Xiao, Y., Lin, W., Armfield, S.W., Kirkpatrick, M.P., and He, Y. (2014) Hydrodynamic stability analysis on inviscid cross sheared stratified flows. In: Proceedings of the 19th Australasian Fluid Mechanics Conference. 82. From: AFMC 2014: 19th Australasian Fluid Mechanics Conference, 8-11 December 2014, Melbourne, VIC, Australia.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Heat transfer through coupled thermal boundary layers induced by a suddenly generated temperature difference. International Journal of Heat and Mass Transfer, 52 (21-22). pp. 4966-4975.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Transition to a periodic flow induced by a thin fin on the sidewall of a differentially heated cavity. International Journal of Heat and Mass Transfer, 52 (3-4). pp. 620-628.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2009) Transient natural convection flows around a thin fin on the sidewall of a differentially heated cavity. Journal of Fluid Mechanics, 639. pp. 261-290.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2008) An experimental study of the unsteady thermal flow around a thin fin on a sidewall of a differentially heated cavity. International Journal of Heat and Fluid Flow, 29 (4). pp. 1139-1153.

Xu, Feng, Patterson, John, and Lei, Chengwang (2008) On the double-layer structure of the boundary layer adjacent to a sidewall of a differentially heated cavity. International Journal of Heat and Mass Transfer, 51 (15-16). pp. 3803-3815.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2008) Unsteady natural convection in a differentially heated partitioned cavity. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics. pp. 11694-11695. From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2007) Natural convection adjacent to a sidewall with three fins in a differentially heated cavity. ANZIAM Journal, 48. pp. 806-819.

Xu, F., Patterson, J.C., and Lei, C. (2007) The leading edge effect in a suddenly differentially heated cavity. ANZIAM Journal, 48. pp. 790-805.

Xu, F., Patterson, John C., and Lei, C. (2007) Observations of the thermal boundary layer flow along a vertical wall with a square obstruction in a side-heated cavity. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference. pp. 1-4. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2007) Simulations of the natural convection in a side-heated cavity with a square obstruction on the sidewall. In: Proceedings of the 8th Australasian Heat and Mass Transfer Conference. From: 8th Australasian Heat and Mass Transfer Conference, 26-29 July 2005, Perth, WA.

Xu, F., Patterson, J.C., and Lei, C. (2007) Natural convection in a differentially heated cavity with a square obstruction on the sidewall. Australian Journal of Mechanical Engineering, 4 (1). pp. 77-86.

Xu, F., Patterson, J.C., and Lei, C. (2007) Transient natural convection in a differentially heated cavity with a thin fin of different lengths on a sidewall. In: Proceedings of the Sixteenth Australasian Fluid Mechanics Conference. pp. 402-405. From: Sixteenth Australasian Fluid Mechanics Conference, 3 - 7 December 2007, Gold Coast, QLD, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2007) An experimental study of the thermal flow around a thin fin on the sidewall of a differentially heated cavity. In: 16th Australasian Fluid Mechanics Conference. pp. 398-401. From: 16th Australasian Fluid Mechanics Conference, 3-7 DEC 2007, Gold Coast, QLD, Australia.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2006) Experimental observations of the thermal flow around a square obstruction on a vertical wall in a differentially heated cavity. Experiments in Fluids, 40 (3). pp. 364-371.

Xu, F., Patterson, J.C., and Lei, C. (2006) Observation and simulation of the double layer structure of the thermal boundary layer in a side-heated cavity. Journal of Flow Visualization & Image Processing, 13 (3). pp. 287-297.

Xu, F., Patterson, J.C., and Lei, C. (2006) Thermal boundary layer flow and heat transfer in a differentially heated cavity with a thin fin on the sidewall. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Xu, F., Patterson, J.C., and Lei, C. (2006) Visualization of the thermal flow around thin fin on the hot wall of a differentially heated rectangular cavity. In: Proceedings of the Joint U.S.-European Fluids Engineering Summer Meeting. pp. 1-8. From: 2006 ASME 2nd Joint U.S.-European Fluids Engineering Summer Meeting, 17-20 July 2006, Miami, FL, USA.

Xu, Feng, Patterson, John C., and Lei, Chengwang (2005) Shadowgraph observations of the transition of the thermal boundary layer in a side-heated cavity. Experiments in Fluids, 38 (6). pp. 770-779.

Xu, Feng (2006) Transient natural convection in a differentially heated cavity with and without a fin on the sidewall. PhD thesis, James Cook University.

Y

Yang, Shuangming, Wang, Jiang, Zhang, Nan, Deng, Bin, Pang, Yanwei, and Rahimi Azghadi, Mostafa (2022) CerebelluMorphic: large-scale neuromorphic model and architecture for supervised motor learning. IEEE Transactions on Neural Networks and Learning Systems. (In Press)

Yang, Shuangming, Wang, Jiang, Deng, Bin, Rahimi Azghadi, Mostafa, and Linares-Barranco, Bernabe (2022) Neuromorphic context-dependent learning framework with fault-tolerant spike routing. IEEE Transactions on Neural Networks and Learning Systems. (In Press)

Yang, Shuangming, Gao, Tian, Wang, Jiang, Deng, Bin, Rahimiazghadi, Mostafa, Lei, Tao, and Linares-Barranco, Bernabe (2022) SAM: a unified self-adaptive multicompartmental spiking neuron model for learning with working memory. Frontiers in Neuroscience, 16. 850945.

Yowa, Gideon Gipmai, Sivakugan, Nagaratnam, Tuladhar, Rabin, and Arpa, Gabriel (2022) Strength and Rheology of Cemented Pastefill using Waste Pitchstone Fines and Common Pozzolans Compared to using Portland Cement. International Journal of Geosynthetics and Ground Engineering, 8. 56.

Yang, Yue, Okonkwo, Emenike G., Huang, Guoyong, Xu, Shengming, Sun, Wei, and He, Yinghe (2021) On the sustainability of lithium ion battery industry – A review and perspective. Energy Storage Materials, 36. pp. 186-212.

Yang, Yang, Hou, Chunping, Lang, Yue, Sakamoto, Takuya, He, Yuan, and Xiang, Wei (2020) Omnidirectional motion classification with monostatic radar system using micro-Doppler signatures. IEEE Transactions on Geoscience and Remote Sensing, 58 (5). pp. 3574-3587.

Yang, Ping, Xiao, Yue, Xiao, Ming, Guan, Yong Liang, Li, Shaoqian, and Xiang, Wei (2019) Adaptive spatial modulation MIMO based on machine learning. IEEE Journal on Selected Areas in Communications, 37 (9). pp. 2117-2131.

Yang, Zhe, Yang, Kan, Lei, Lei, Zheng, Kan, and Leung, Victor C.M. (2019) Blockchain-based decentralized trust management in vehicular networks. IEEE Internet of Things Journal, 6 (2). pp. 1495-1505.

Yuan, Pu, Xiong, Xiong, Lei, Lei, and Zheng, Kan (2019) Design and implementation on Hyperledger-based Emission Trading System. IEEE Access, 7. pp. 6109-6116.

Yang, Ping, Xiao, Yue, Xiao, Ming, Zhu, Jing, Li, Shaoqian, and Xiang, Wei (2019) Enhanced receive spatial modulation based on power allocation. IEEE Journal on Selected Topics in Signal Processing, 13 (6). pp. 1312-1325.

Yang, Yang, Hou, Chunping, Lang, Yue, Yue, Guanghui, He, Yuan, and Xiang, Wei (2019) Person identification using micro-doppler signatures of human motions and UWB radar. IEEE Microwave and Wireless Components Letters, 29 (5). pp. 366-368.

Yu, Qi-Yue, Li, Ya-tian, Meng, Wei-Xiao, and Xiang, Wei (2019) Uniquely decodable codes for physical-layer network coding in wireless cooperative communications. IEEE Systems Journal, 13 (4). pp. 3956-3967.

Yan, Ke, Li, Wei, Ji, Zhiwei, Qi, Meng, and Du, Yang (2019) A hybrid LSTM neural network for energy consumption forecasting of individual households. IEEE Access, 7. pp. 157633-157642.

Yang, Zhe, Zhang, Kuan, Lei, Lei, and Zheng, Kan (2019) A novel classifier exploiting mobility behaviors for Sybil detection in connected vehicle systems. IEEE Internet of Things Journal, 6 (2). pp. 2626-2636.

Yang, Yibo, Ma, Yongkui, Xiang, Wei, Gu, Xuemai, and Zhao, Honglin (2018) Joint optimization of energy consumption and packet scheduling for mobile edge computing in cyber-physical networks. IEEE Access, 6. pp. 15576-15586.

Yin, Ling, Baba, Takashi, and Nakanishi, Yoshitaka (2018) Fracture-free surfaces of CAD/CAM lithium metasilicate glass-ceramic using micro-slurry jet erosion. Journal of the Mechanical Behavior of Biomedical Materials, 80. pp. 59-67.

Yang, Ping, Zhu, Jing, Liu, Zilong, Xiao, Yue, Li, Shaoqian, and Xiang, Wei (2018) Unified power allocation for receive spatial modulation based on approximate optimization. IEEE Access, 6. pp. 49450-49459.

Yang, Ping, Xiao, Yue, Guan, Yong Liang, Liu, Zilong, Li, Shaoqian, and Xiang, Wei (2017) Adaptive SM-MIMO for mmWave communications with reduced RF chains. IEEE Journal on Selected Areas in Communications, 35 (7). pp. 1472-1485.

Yu, Qi-Yue, Guo, Ji-Chong, Gao, Shu-Ying, Meng, Wei-Xiao, and Xiang, Wei (2017) Minimum sum-mean-square-error frequency-domain pre-coding for downlink multi-user MIMO system in the frequency-selective fading channel. IEEE Transactions on Wireless Communications, 16 (6). pp. 3573-3589.

Yin, Ling, Nakanishi, Yoshitaka, Alao, Abdur-Rasheed, Song, Xiao-Fei, Abduo, Jaafar, and Zhang, Yu (2017) A review of engineered zirconia surfaces in biomedical applications. Procedia CIRP, 65. pp. 284-290.

Yin, Shi, Tuladhar, Rabin, Riella, Jacob, Chung, David, Collister, Tony, Combe, Mark, and Sivakugan, Sivakugan (2016) Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete. Construction and Building Materials, 114 (1). pp. 134-141.

Yin, Shi, Tuladhar, Rabin, Sheehan, Madoc, Combe, Mark, and Collister, Tony (2016) A life cycle assessment of recycled polypropylene fibre in concrete footpaths. Journal of Cleaner Production, 112 (Part 4). pp. 2231-2242.

Yu, Qi-Yue, Li, Ya-Tian, Xiang, Wei, Meng, Wei-Xiao, and Tang, Wen-Yan (2016) Power allocation for distributed antenna systems in frequency-selective fading channels. IEEE Transactions on Communications, 64. pp. 212-222.

Yang, Xiaozhen, Zhou, Qihao, Lei, Lei, Zheng, Kan, and Xiang, Wei (2016) An IoT-cloud based wearable ECG monitoring system for smart healthcare. Journal of Medical Systems, 40. 286. pp. 1-11.

Yin, Ling, Alao, Abdur-Rasheed, Song, Xiao-Fei, and Stoll, Richard (2016) Manufacturing reliable ceramic crowns: the role of abrasive machining in digital dentistry. In: Proceedings of the 11th International Manufacturing Science and Engineering Conference (1) pp. 1-8. From: ASME 2016: 11th International Manufacturing Science and Engineering Conference, 27 June - 1 July 2016, Blacksburg, VA, USA.

Yin, Shi, Tuladhar, Rabin, Collister, Tony, Combe, Mark, Sivakugan, Nagaratnam, and Deng, Zongcai (2015) Post-cracking performance of recycled polypropylene fibre in concrete. Construction and Building Materials, 101 (Part 1). pp. 1069-1077.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Shanks, Robert A., Combe, Mark, and Collister, Tony (2015) Mechanical reprocessing of polyolefin waste: a review. Polymer Engineering and Science, 55 (12). pp. 2899-2909.

Yin, Shi, Tuladhar, Rabin, Shi, Feng, Combe, Mark, Collister, Tony, and Sivakugan, Nagaratnam (2015) Use of macro plastic fibres in concrete: a review. Construction and Building Materials, 93. pp. 180-188.

Yin, Shi, Tuladhar, Rabin, Shanks, Robert A., Collister, Tony, Combe, Mark, Jacob, Mohan, Tian, Ming, and Sivakugan, Nagaratnam (2015) Fiber preparation and mechanical properties of recycled polypropylene for reinforcing concrete. Journal of Applied Polymer Science, 132 (16). 41866. pp. 1-10.

Yin, L., and Stoll, R. (2014) Ceramics in restorative dentistry. In: Low, I.M., (ed.) Advances in Ceramic Matrix Composites. Woodhead Publishing Series in Composites Science and Engineering, 45 . Woodhead Publishing Limited, Cambridge, UK, 624 -655.

Yin, Ling, Lymer, Richard, Billiau, Nicholas, Peng, Zhongxiao, and Stoll, Richard (2013) Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic. Journal of Materials Science, 48 (22). pp. 7902-7912.

Yin, Shi, Tuladhar, Rabin, Combe, Mark, Collister, Tony, Jacob, Mohan, and Shanks, Robert (2013) Mechanical properties of recycled plastic fibres for reinforcing concrete. In: Proceedings of the 7th International Conference Fibre Concrete. pp. 1-10. From: 7th International Conference Fibre Concrete, September 12-13 2013, Prague, Czech Republic.

Yin, L., Singh, P., Brodie, G., Sheehan, M., and Jacob, M.V. (2013) Experimental and simulation approaches: effect of microwave energy on mechanical strength in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 10 (2). pp. 120-128.

Yin, Ling, Singh, Parmeet, Brodie, Graham, Sheehan, Madoc, and Jacob, Mohan V. (2012) Influence of microwave energy on mechanical strength in sugarcane. In: Proceedings of the 7th Australasian Congress on Applied Mechanics. pp. 754-758. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Yin, Ling (2012) Property–process relations insimulated clinical abrasive adjusting of dental ceramics. Journal of the Mechanical Behaviour of Biomedical Materials, 16. pp. 55-65.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2012) 2D and 3D mapping of microindentations in hydrated and dehydrated cortical bones using confocal laser scanning microscopy. Journal of Materials Science, 47 (10). pp. 4432-4438.

Yin, Ling, and Song, Xiao-Fei (2011) Grindability of dental ceramics in the in vitro oral regime. International Journal of Abrasive Technology, 4 (3). pp. 204-222.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, Qin, Qing-Hua, and Forwood, Mark R. (2010) Mechanical responses of hydrated and dehydrated cortical bones to microindentation. In: Proceedings of the 6th Australasian Congress on Applied Mechanics. pp. 1-5. From: ACAM 6 - 6th Australasian Congress on Applied Mechanics, 12- 15 December 2010, Perth, WA, Australia.

Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2010) Influence of enzymatic maceration on the microstructure and microhardness of compact bone. Biomedical Materials, 5 (1). 015006. pp. 1-6.

Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of microstructure on micromechanical performance of dry cortical bone tissues. Materials Characterization, 60 (12). pp. 1424-1431.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of cryo-induced microcracks on microindentation of hydrated cortical bone tissue. Materials Characterization, 60 (8). pp. 283-291.

Yin, Ling (2009) Abrasive technology in ceramic restorative dentistry. Advanced Materials Research, 76-78 (12). pp. 363-369.

Yuan, C. Q., Peng, Z., Yan, X.P., and Zhou, X. C. (2008) Surface roughness evolutions in sliding wear process. Wear, 265 (3-4). pp. 341-348.

Younis, Obai, Xu, Feng, Patterson, John C., Lei, Chengwang, Pallares, Jordi, and Grau, Francesc X. (2008) An experimental study of transient natural convection in a side-cooled cavity. In: Proceedings of XXII International Congress of Theoretical and Applied Mechanics. - . From: XXII International Congress of Theoretical and Applied Mechanics, 25-29 August 2008, Adelaide, SA, Australia.

Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J., and St John, David H. (2007) Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. Journal of Materials Science, 42 (23). pp. 9756-9764.

Yuan, C.Q., Yan, X.P., and Peng, Z. (2007) Prediction of surface features of wear components based on surface characteristics of wear debris. Wear, 263 (7-12). pp. 1513-1517.

Yin, Ling, Han, Yi-Gang, Song, Xiao-Fei, and Wang, Hui (2007) Effect of diamond burs on process and damage involving in vitro dental resurfacing of a restorative porcelain. Journal of Physics D: applied physics, 40 (17). pp. 5291-5300.

Yao, X. (2006) Effect of solute redistribution on the growth kinetics in solidification. International Journal of Modern Physics B, 20 (25-27). pp. 3938-3943.

Yao, X., and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128.

Yao, X. (2006) On the solute coupling at the moving solid-liquid interface during equiaxed solidification. Applied Physics Letters, 89 (7). pp. 71903-71905.

Yao, Xiangdong, Wu, Chengzhang, Du, Aijun, Lu, Gao Qing, Cheng, Huiming, Smith, Sean C., Zou, Jin, and He, Yinghe (2006) Mg-based nanocomposites with high capacity and fast kinetics for hydrogen storage. Journal of Physical Chemistry Part B, 110 (24). pp. 11697-11703.

Yao, X. (2006) Modeling and experimental study of the interface morphology and growth kinetics for fibrous growth of eutectic. Journal of Materials Research, 21 (12). pp. 3009-3016.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear, 259 (1). pp. 512-518.

Yeow, Y Leong, and Leong, Yee-Kwong (2005) A general computational method for converting normal spectra into derivative spectra. Applied Spectroscopy, 59 (5). pp. 584-592.

Yuan, Chengqing, Peng, Zhongxiao, and Yan, Xinping (2005) Surface characterization using wavelet theory and confocal laser scanning microscopy. Journal of Tribology, 127 (2). pp. 394-404.

Yeow, Y. Leong, Chandra, Dolly, Sardjono, Albert A., Wijaya, Hartono, Leong, Yee-Kwong, and Khan, Ash (2005) A general method for obtaining shear stress and normal stress functions from parallel disk rheometry data. Rheologica Acta, 44 (3). pp. 270-277.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribology International, 38 (2). pp. 129-143.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The study of sliding and rolling wear using wear debris analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials. pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Yeow, Y. Leong, Pradhana, Stephanus I., Tan, Heather C.L., and Leong, Yee-Kwong (2004) Applying Tikhonov regularization to process the kinetic data of polymerization. Journal of Applied Polymer Science, 94 (4). pp. 1625-1633.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2004) Effects of temperature on sliding wear process under contaminated lubricant test conditions. Wear, 257 (7-8). pp. 812-822.

Yeow, Y. Leong, Leong, Yee-Kwong, Cheah, Mee Yean, Dang, Huong D. T., and Law, Connie K. P. (2004) Cleaving of S-mandelonitrile catalyzed by S-hydroxynitrile lyase from Hevea brasiliensis - a kinetic investigation based on the rate curve method. Journal of Biotechnology, 111 (1). pp. 31-39.

Yeow, Y.Leong, and Leong, Yee-Kwong (2004) Shear rate and wall slip velocity functions of polyvinyl chloride melts based on slit die viscometry data. Polymer Engineering and Science, 44 (1). pp. 153-162.

Yeow, Y.L., Wickramasinghe, S.R., Han, B.B., and Leong, Y.K. (2004) Applying Tikhonov regularization to the time-concentration data of reaction kinetics. In: Proceedings of the 16th International Congress of Chemical and Process Engineering. pp. 1-10. From: 16th International Congress of Chemical and Process Engineering, 22 - 26 August 2004, Prague, Czech Republic.

Yeow, Y. Leong, Wickramasinghe, S. Ranil, Han, Binbing, and Leong, Yee-Kwong (2003) A new method of processing the time-concentration data of reaction kinetics. Chemical Engineering Science, 58 (16). pp. 3601-3610.

Yuan, C.Q., Li, J., Yan, X.P., and Peng, Z. (2003) The use of the fractal description to characterize engineering surfaces and wear particles. Wear, 255 (1-6). pp. 315-326.

Yeow, Y.Leong, Wickramasinghe, S.Ranil, Leong, Yee-Kwong, and Han, Binbing (2002) Model-independent relationships between hematocrit, blood viscosity, and yield stress derived from Couette viscometry data. Biotechnology Progress, 18 (5). pp. 1068-1075.

Yeow, Y. Leong, Leong, Yee-Kowng, Wickramasinghe, S. Ranil, and Han, Binbing (2002) Obtaining the shear stress versus shear rate relationship and yield stress of blood from capillary viscometry data by Tikhonov regularization. Biotechnology Progress, 18 (4). pp. 879-884.

Yeow, Y.L., Perona, P., and Leong, Y. (2002) A reliable method of extracting the rheological properties of fruit purees from flow loop data. Journal of Food Science, 67 (4). pp. 1407-1411.

Z

Zhang, Mengyao, Huang, Tao, Guo, Zhaoxia, and He, Zhenggang (2022) Complex-network-based traffic network analysis and dynamics: A comprehensive review. Physica A: statistical mechanics and its applications. (In Press)

Zia, Muhammad Umer, Xiang, Wei, Vitetta, G.M., and Huang, Tao (2022) Deep Learning for Parametric Channel Estimation in Massive MIMO Systems. IEEE Transactions on Vehicular Technology. (In Press)

Zeng, Yongkang, Chen, Jingjing, Jin, Ning, Jin, Xiaoping, and Du, Yang (2022) Air quality forecasting with hybrid LSTM and extended stationary wavelet transform. Building and Environment, 213. 108822.

Zia, Muhammad Umer, Xiang, Wei, Huang, Tao, and Ijaz Haider, Naqvi (2022) Deep Learning-aided TR-UWB MIMO System. IEEE Transactions on Communications, 70 (10). pp. 6579-6588.

Zafar, Muhammad Adeel, Varghese, Oomman K., Robles Hernandez, Francisco C., Liu, Yang, and Jacob, Mohan V. (2022) Single-Step Synthesis of Nitrogen-Doped Graphene Oxide from Aniline at Ambient Conditions. Applied Materials and Interfaces, 14 (4). pp. 5797-5806.

Zhang, Tim, Lammie, Corey, Azghadi, Mostafa Rahimi, Amirsoleimani, Amirali, Ahmadi, Majid, and Genov, Roman (2022) Toward A Formalized Approach for Spike Sorting Algorithms and Hardware Evaluation. In: Proceedings of the IEEE 65th Midwest Symposium on Circuits and Systems. From: MWSCAS 2022: IEEE 65th International Midwest Symposium on Circuits and Systems, 7-10 August 2022, Fukuoka, Japan.

Zhou, Hangxia, Liu, Qian, Yan, Ke, and Du, Yang (2021) Deep learning enhanced solar energy forecasting with AI-driven IoT. Wireless Communications and Mobile Computing, 2021. 9249387.

Zhang, Yan, Li, Qian, Sun, Shaokang, Liu, Xiaoliang, Jiang, Tao, Lyu, Xianjun, and He, Yinghe (2021) Electrochemical behaviour of the oxidative dissolution of arsenopyrite catalysed by Ag+ in 9K culture medium. Colloids and Surfaces A: physicochemical and engineering aspects, 614. 126169.

Zhou, Linjing, Armfield, Steven, Williamson, Nicholas, Kirkpatrick, Michael, and Lin, Wenxian (2021) Natural convection in a cavity with time-dependent flux boundary. International Journal of Heat and Fluid Flow, 92. 108887.

Zhang, Zuyun, Liu, Guanfeng, Qui, Meikang, Xiang, Wei, and Huang, Tao (2020) Cloud Computing, Smart Grid and Innovative Frontiers in Telecommunications: 9th EAI international conference, Cloudcomp 2019, and 4th EAI international conference, SmartGIFT 2019, Beijing, China, December 4-5, 2019, and December 21-22, 2019. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 322 . Springer, Cham, Switzerland.

Zhang, Hongyan, Xiao, Yue, Xiao, Yanping, and Xiang, Wei (2020) Impact of imperfect angle estimation on spatial and directional modulation. IEEE Access, 8. pp. 7081-7092.

Zhou, L., Armfield, S.W., and Lin, W. (2020) Natural convection in a cavity with time-dependent flux boundary. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. 67. From: AFCM2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

Zhou, L., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, W. (2020) Natural convection in a cavity with time-varying thermal forcing on a sidewall. International Journal of Heat and Mass Transfer, 150. 119234.

Zhang, Yufei, Zhang, Na, Chen, Jin, Zhang, Tiezhu, Ge, Wenqing, Zhang, Weimin, Xie, Gang, Zhang, Lipeng, and He, Yinghe (2020) Preparation and lithium storage properties of C@TiO₂/3D carbon hollow sphere skeleton composites. Journal of Alloys and Compounds, 815. 152511.

Zhang, Yan, Li, Qian, Liu, Xiaoliang, Yin, Huaqun, Yang, Yongbin, Xu, Bin, Jiang, Tao, and He, Yinghe (2020) The catalytic effect of copper ion in the bioleaching of arsenopyrite by Acidithiobacillus ferrooxidans in 9K culture medium. Journal of Cleaner Production, 256. 120391.

Zhang, Bidan, Du, Yang, Lim, Eng Gee, Jiang, Lin, and Yan, Ke (2019) Design and simulation of Peer-to-Peer energy trading framework with dynamic electricity price. In: Proceedings of the 29th Australasian Universities Power Engineering Conference. From: AUPEC 2019: 29th Australasian Universities Power Engineering Conference, 26-29 May 2019, Nadi, Fiji.

Zhang, Wenbin, Wei, Yuming, Wu, Shaochuan, Meng, Weixiao, and Xiang, Wei (2019) Joint beam and resource allocation in 5G mmWave small cell systems. IEEE Transactions on Vehicular Technology, 68 (10). pp. 10272-10277.

Zhao, Yan, Xiao, Yue, Lei, Xia, Yang, Ping, and Xiang, Wei (2019) Priori-aided detection for generalized space-and-frequency index modulation systems with multi-carrier frequency offset. IEEE Transactions on Vehicular Technology, 68 (10). pp. 10330-10334.

Zahedi, Ahmad (2019) Renewable energy-based micro-grid; a zero-emission option for electricity production in Australia. In: Proceedings of the IEEE PES Innovative Smart Grid Technologies. 8881091. pp. 1364-1368. From: ISGT Asia 2019: IEEE PES Innovative Smart Grid Technologies, 21-24 May 2019, Chengdu, China.

Zhang, Yi-Fan, Thorburn, Peter J., Xiang, Wei, and Fitch, Peter (2019) SSIM - a deep learning approach for recovering missing time series sensor data. IEEE Internet of Things Journal, 6 (4). pp. 6618-6628.

Zhou, Yuan, Huo, Shuwei, Xiang, Wei, Hou, Chunping, and Kung, Sun-Yuan (2019) Semi-supervised salient object detection using a linear feedback control system model. IEEE Transactions on Cybernetics, 49 (4). pp. 1173-1185.

Zhou, Hangxia, Zhang, Yujin, Yang, Lingfan, Liu, Congqiang, Yan, Ke, and Du, Yang (2019) Short-term photovoltaic power forecasting based on long short term memory neural network and attention mechanism. IEEE Access, 7. pp. 78063-78074.

Zhou, Yuan, Wu, Qiong, Yan, Kangming, Feng, Liyang, and Xiang, Wei (2019) Underwater image restoration using color-line model. IEEE Transactions on Circuits and Systems for Video Technology, 29 (3). pp. 907-911.

Zhao, Long, Zheng, Kan, Yang, Haojun, and Xiang, Wei (2018) Beamformer design and utility optimization for hybrid information and energy transfer with massive MIMO. IEEE Systems Journal, 12 (2). pp. 1981-1992.

Zhang, Lijuan, Xiang, Wei, and Tan, Xiaohu (2018) An efficient bit-detecting protocol for continuous tag recognition in mobile RFID systems. IEEE Transactions on Mobile Computing, 17 (3). pp. 503-516.

Zhao, Long, Zhao, Hui, Zheng, Kan, and Xiang, Wei (2018) Massive MIMO in 5G Networks: Selected Applications. Springer Briefs in Electrical and Computer Engineering . Springer, Cham, Switzerland.

Zhang, Can, Du, Yang, Chen, Xiaoyang, and Lu, Dylan D.C. (2018) Cloud motion tracking system using low-cost sky imager for PV power ramp-rate control. In: Proceedings of the IEEE International Conference on Industrial Electronics for Sustainable Energy Systems. pp. 493-498. From: IESES 2018: IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, 31 January - 2 February 2018, Hamilton, New Zealand.

Zhang, Didi, Wang, Yafeng, Li, Xuehua, and Xiang, Wei (2018) Hybridly connected structure for hybrid beamforming in mmWave massive MIMO systems. IEEE Transactions on Communications, 66 (2). pp. 662-674.

Zhao, Yan, Xiao, Yue, Yang, Ping, Dong, Binhong, Lei, Xia, and Xiang, Wei (2018) MMSE-based detector for spatial modulation OFDM systems with multiple CFOs. In: Proceedings of the 10th International Conference on Wireless Communications and Signal Processing. From: WCSP 2018: 10th International Conference on Wireless Communications and Signal Processing, 18-20 October 2018, Hangzhou, China.

Zhang, Didi, Wang, Yafeng, Su, Zhong, and Xiang, Wei (2018) Millimeter wave channel estimation based on subspace fitting. IEEE Access, 6. pp. 76126-76139.

Zahedi, Ahmad (2018) Modelling a sustainable future for Queensland's residential electric power supply. In: Proceedings of the Australasian Universities Power Engineering Conference. 5. From: AUPEC 2018: Australasian Universities Power Engineering Conference, 27-30 November 2018, Auckland, New Zealand.

Zhou, Linjing, Armfield, Steven, Williamson, Nicholas, Kirkpatrick, Michael, and Lin, Wenxian (2018) Natural convection stratification and scaling in a cavity with unsteady sidewall heating. In: AIP Conference Proceedings (1983) 020034. From: ICOME 2017: 3rd International Conference on Mechanical Engineering: disruptive innovation in mechanical engineering for industry competitiveness, 5–6 October 2017, Surabaya, Indonesia.

Zhao, Yan, Yang, Ping, Xiao, Yue, Dong, Binhong, and Xiang, Wei (2018) Soft-feedback time-domain turbo equalization for single-carrier generalized spatial modulation. IEEE Transactions on Vehicular Technology, 67 (10). pp. 9421-9434.

Zhang, Lijuan, Xiang, Wei, Tang, Xiaohu, Li, Qiang, and Yan, Qifa (2018) A time- and energy-aware collision tree protocol for efficient large-scale RFID tag identification. IEEE Transactions on Industrial Informatics, 14 (6). pp. 2406-2417.

Zhao, Long, Riihonen, Taneli, Xiang, Wei, Kuang, Yingzhuoxu, and Zheng, Kan (2017) Resource optimization of wireless information and energy supply control systems with massive MIMO. IEEE Communications Letters, 21 (12). pp. 2734-2737.

Zhang, Lijuan, Xiang, Wei, Atkinson, Ian, and Tang, Xiaohu (2017) A time-efficient pair-wise collision-resolving protocol for missing tag identification. IEEE Transactions on Communications, 65 (12). pp. 5348-5361.

Zhao, Yan, Yang, Ping, Xiao, Yue, Xiao, Lixia, Dong, Binhong, and Xiang, Wei (2017) An improved frequency domain turbo equalizer for single-carrier spatial modulation systems. IEEE Transactions on Vehicular Technology, 66 (8). pp. 7568-7572.

Zhou, Yuan, Wang, Ning, and Xiang, Wei (2017) Clustering hierarchy protocol in wireless sensor networks using an improved PSO algorithm. IEEE Access, 5. pp. 2241-2253.

Zhao, Yan, Xiao, Yue, Dong, Binhong, Yang, Ping, Xiao, Lixia, and Xiang, Wei (2017) Efficient detection of spatial modulation OFDM systems with multiple carrier frequency offsets. IEEE Communications Letters, 2 (21). pp. 426-429.

Zheng, Kan, Wang, Huijian, Li, Hang, Lei, Lei, Xiang, Wei, Qiao, Jian, and Shen, Xuemin Sherman (2017) Energy-efficient localization and tracking of mobile devices in wireless sensor networks. IEEE Transactions on Vehicular Technology, 66 (3). pp. 2714-2726.

Zahedi, A. (2017) Large scale solar PV generation for Southeast Asian countries. In: Proceedings of the 2017 Australasian Universities Power Engineering Conference. From: AUPEC: 2017 Australasian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, VIC, Australia.

Zhang, Didi, Wang, Yafeng, and Xiang, Wei (2017) Leakage-based hybrid beamforming design for downlink multiuser mmWave MIMO systems. In: Proceedings of the IEEE International Symposium on Personal, Indoor and Mobile Radio Communications. From: PIMRC 2017: IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, 8-13 October 2017, Montreal, Canada.

Zhang, Didi, Wang, Yafeng, and Xiang, Wei (2017) Polar decomposition based hybrid beamforming design for mmWave massive MIMO systems. In: Proceedings of the IEEE Global Communications Conference. From: GLOBECOM 2017: IEEE Global Communications Conference, 4-8 December 2017, Singapore.

Zhou, L., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, Wenxian (2016) Transient natural convection flow in a cavity subject to time-varying sidewall heating and cooling. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. 516. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.

Zheng, Kan, Wang, Xianbin, Chatzimisios, Periklis, and Xiang, Wei (2016) Advances in new signal processing techniques for 5G. International Journal of Antennas and Propagation, 2016. 4345762.

Zheng, Kan, Zhang, Lin, Xiang, Wei, and Wang, Wenbo (2016) Heterogeneous Vehicular Networks. Springer Briefs in Electrical and Computer Engineering . Springer, Cham, Switzerland.

Zahedi, A. (2016) Solar PV for Australian tropical region; the most affordable and an appropriate power supply option. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-4. From: AUPEC 2016: Australasian Universities Power Engineering Conference, 25-28 September 2016, Brisbane, QLD, Australia.

Zahedi, Ahmad (2015) A comprehensive review of operational analysis of wind turbines. In: Proceedings of the Australasian Universities Power Engineering Conference. 14. pp. 1-5. From: AUPEC 2015: Australasian Universities Power Engineering Conference, 27-30 September 2015, Wollongong, NSW, Australia.

Zahedi, Ahmad (2015) How expensive is grid-connected solar photovoltaic in Marrakesh: an economic analysis. In: Proceedings of the 3rd International Renewable and Sustainable Energy Conference. pp. 78-82. From: IRSEC 2015: 3rd International Renewable and Sustainable Energy Conference, 10-13 December 2015, Marrakech, Morocco.

Zhu, Shucheng, Kikkert, Cornelis Jan, and Ertugrul, N. (2015) Software for control and calibration of an inductive shunt on-line impedance analyzer. In: Proceedings of the 2015 International Symposium on Power Line Communications and it's Applications. pp. 53-58. From: ISPLC: 2015 International Symposium on Power Line Communications and it's Applications, 29-31 March 2015, Austin, TX, USA.

Zahedi, Ahmad (2014) Developing a method to accurately estimate the electricity cost of grid-connected solar PV in Doha. In: Proceedings of the International Science and Technology Conference. pp. 180-187. From: ISTEC 2014: International Science and Technology Conference, 18-20 December 2014, Doha, Qatar.

Zahedi, A., and Aldeen, M. (2014) Evaluation of PV solar power generation scenarios in reducing electricity spot price during hot summer days in Victoria, Australia. In: Proceedings of the Australasian Universities Power Engineering Conference. 119. pp. 1-6. From: AUPEC 2014: Australasian Universities Power Engineering Conference, 28 September - 1 October 2014, Perth, WA, Australia.

Zahedi, A. (2014) Proposing a smart electricity pricing model for future smart grid. In: Proceedings of the Australasian Universities Power Engineering Conference. 108. pp. 1-4. From: AUPEC 2014: Australasian Universities Power Engineering Conference, 28 September - 1 October 2014, Perth, WA, Australia.

Zahedi, Ahmad (2014) Benefits of electric vehicle integrated into the electricity network. In: Presented at a Public Lecture at James Cook University. pp. 1-78. From: Public Lecture at James Cook University, 31 July 2014, Townsville, QLD, Australia.

Zahedi, A. (2014) Developing a method to accurately estimate the electricity cost of grid-connected solar PV in Bangkok. In: Proceedings of the International Conference and Utility Exhibition on Green Energy for Sustainable Development. pp. 1-4. From: International Conference and Utility Exhibition on Green Energy for Sustainable Development, 19-21 March 2014, Pattaya, Thailand.

Zahedi, Ahmad (2014) Developing a method to analyse the electricity cost of wind power. In: Proceedings of the International Conference and Utility Exhibition on Green Energy for Sustainable Development. pp. 1-5. From: International Conference and Utility Exhibition on Green Energy for Sustainable Development, 19-21 March 2014, Pattaya, Thailand.

Zahedi, Ahmad (2014) Sustainable power supply using solar energy and wind power combined with energy storage. Energy Procedia, 52. pp. 642-650.

Zaeri, Mahtab, Sharda, Nalin, and Zahedi, Ahmad (2014) A five layer model for simulating a virtual power plant. In: Proceedings of the IEEE Innovative Smart Grid Technologies Conference. pp. 435-440. From: ISGT Asia 2014: IEEE nnovative Smart Grid Technologies Conference, 20-23 May 2014, Kuala Lumpur, Malaysia.

Zhu, Shucheng, Kikkert, Cornelis Jan, and Ertugrul, Nesimi (2014) A wide bandwidth, on-line impedance measurement method for power systems, based on PLC techniques. In: Proceedings of the 2014 IEEE International Symposium on Circuits and Systems. pp. 1167-1170. From: ISCAS 2014: International Symposium on Circuits and Systems, 1-5 June 2014, Melbourne, VIC, Australia.

Zahedi, Ahmad (2013) Developing a method to accurately estimate the grid-connected solar PV electricity cost in Hobart-Australia. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-4. From: AUPEC 2013: Australasian Universities Power Engineering Conference, 29 September - 03 October 2013, Hobart, TAS, Australia.

Zahedi, Ahmad (2013) Economic analysis of wind power development in coastal regions of Tasmania. In: Proceedings of the Australasian Universities Power Engineering Conference in 2013. pp. 1-6. From: AUPEC 2013: Australasian Universities Power Engineering Conference, 29 September - 03 October 2013, Hobart, TAS, Australia.

Zahedi, Ahmad (2012) Current status and future prospects of the wind energy. In: Papers of the 10th International Power & Energy Conference. P0237. pp. 1-5. From: International Power & Energy Conference 2012, 12-14 December 2012, Ho Chi Minh City, Vietnam.

Zahedi, Ahmad (2012) Performance evaluation of wind turbine using Monte Carlo method and turbine power curve. In: Proceedings of the 10th International Power and Energy Conference. P0165. pp. 1-5. From: International Power and Energy Conference 2012, 12-14 December 2012, Ho Chi Minh City, Vietnam.

Zahedi, Ahmad, and Lu, Jun (2012) Economic evaluation of grid-connected solar PV production cost in New Zealand. In: Proceedings of the 2012 International Conference on Power System Technology. pp. 1-4. From: POWERCON 2012, 30 October - 2 November 2012, Auckland, New Zealand.

Zhang, Lei, Liu, Tao, Gao, Wenfeng, and Lin, Wenxian (2012) Comparison of performance of four commonly-used turbulence models in numerically simulating two-dimensional backward-facing step turbulent flows. Journal of Yunnan Normal University, 32 (4). pp. 8-16.

Zahedi, Ahmad (2012) Electric vehicle as distributed energy storage resource for future smart grid. In: Proceedings of the 22nd Australasian Universities Power Engineering Conference. pp. 1-4. From: Australasian Universities Power Engineering Conference 2012, 26-29 September 2012, Bali, Indonesia.

Zahedi, Ahmad, and Lu, Jun (2011) Modelling and control of PEMFC based on support vector machine. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-6. From: AUPEC 2011 Australasian Universities Power Engineering Conference, 25-28 September 2011, Brisbane, QLD, Australia.

Zahedi, A. (2011) Review of modelling details in relation to low-concentration solar concentrating photovoltaic. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1609-1614.

Zahedi, A. (2011) Maximizing solar PV energy penetration using energy storage technology. Renewable and Sustainable Energy Reviews, 15 (1). pp. 866-870.

Zahedi, A. (2011) Developing a linear model for estimating the capacity factor of wind turbines. In: Proceedings of the Australasian Universities Power Engineering Conference. pp. 1-5. From: AUPEC 2011 Australasian Universities Power Engineering Conference, 25-28 September 2011, Brisbane, QLD, Australia.

Zahedi, Ahmad (2011) Developing a system model for future smart grid. In: Proceedings of IEEE PES Innovative Smart Grid Technologies Asia 2011 Conference. pp. 1-5. From: IEEE PES ISGT Asia 2011 - IEEE Power and Energy Society’s Innovative Smart Grid Technologies Asia 2011 Conference, 13-16 November 2011, Perth, WA, Australia.

Zahedi, Ahmad (2011) Smart grid opportunities & challenges for power industry to manage the grid more efficiently. In: Proceedings of Asia-Pacific Power and Energy Engineering Conference. pp. 1-4. From: APPEEC 2011 Asia-Pacific Power and Energy Engineering Conference, 25-28 March 2011, Wuhan, China.

Zahedi, A. (2011) A review of drivers, benefits, and challenges in integrating renewable energy sources into electricity grid. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4775-4779.

Zahedi, Ahmad (2010) Australian renewable energy progress. Renewable and Sustainable Energy Reviews, 14 (8). pp. 2208-2213.

Zahedi, Ahmad (2010) Sustainable electric energy supply by decentralized alternative energy technologies. In: Proceedings of the 4th International Conference on Sustainability Engineering and Science. pp. 1-10. From: 4th International Conference on Sustainability Engineering and Science, 30 November - 3 December 2010, Auckland, New Zealand.

Zahedi, A. (2010) A review on feed-in tariff in Australia, what it is now and what it should be. Renewable & Sustainable Energy Reviews, 14 (9). pp. 3252-3255.

Zahedi, A. (2009) Opportunities for rooftop photovoltaic system in Queensland. In: Proceedings of Solar09, the 47th annual conference of ANZSES2009. pp. 1-11. From: Solar09, the 47th annual conference of ANZSES2009, 29th September - 2nd October, 2009, Townsville, QLD, Australia.

Zahedi, A. (2009) Development of an economical model to determine an appropriate fee-in tariff for grid-connected solar PV electricity for all states of Australia. Renewable and Sustainable Energy Reviews, 13 (4). pp. 871-878.

Zahedi, Ahmad (2009) Opportunities and challenges for renewable energy in Australia. University Journal of Engineering and Technology, 1. pp. 14-20.

Zahedi, Ahmad (2009) Sustainable power supply using renewable energy and storage technologies. In: Proceedings of Central Region Engineering Conference CREC 2009. From: Central Region Engineering Conference CREC 2009, 14-15 August 2009, Rockhampton, QLD, Australia.

Zahedi, A. (2008) Solar Energy Based Distributed Generation Technologies. In: Proceedings of the International Conference of the IET Brunei Darussalam Network. pp. 1-4. From: Sustainable energy management in the era of information & communication technology, 26 May 2008, Brunei Darussalam.

Zahedi, Ahmad (2008) Economical analysis of grid-connected solar photovoltaic systems. In: Papers from the 3rd International Solar Energy Society Conference – Asia Pacific Region. pp. 1-5. From: 3rd International Solar Energy Society Conference – Asia Pacific Region (ISES-AP-08), 25-28 November, 2008, Sydney, NSW, Australia.

Zahedi, Ahmad (2008) Low-emission and sustainable power supply for remote communities. In: Proceedings of the Inaugural Symposium on Electrical Energy Evolution in China and Australia. pp. 1-6. From: Electrical Energy Evolution in China and Australia, 28-30 July 2008, Palm Cove, QLD, Australia.

Zahedi, Ahmad (2008) Modeling, simulation and optimization of renewable energy-based power system to supply reliable electricity for remote applications. In: Proceedings of 2008 Australasian Universities Power Engineering Conference. From: 2008 Australasian Universities Power Engineering Conference, 14-17 December 2008, Sydney, NSW, Australia.

Zahedi, A. (2008) Renewable energy-based power system to supply reliable electricity for remote applications. In: Power Engineering Conference, 2008. AUPEC '08. Australasian Universities. pp. 1-4. From: 2008 Australasian Universities Power Engineering Conference, 14 - 17 December 2008, Sydney, NSW.

Zhou, Shouqin, Ling, Weiqing, and Peng, Zhongxiao (2007) An RFID-based remote monitoring system for enterprise internal production management. International Journal of Advanced Manufacturing Technology, 33 (7-8). pp. 837-844.

Zahedi, A. (2006) Solar photovoltaic (PV) energy; latest developments in the building integrated and hybrid PV systems. Renewable Energy, 31 (5). pp. 711-718.

Zychowicz, Tomasz, Krupka, Jerzy, and Mazierska, Janina (2006) Measurements of conductivity of thin gold films at microwave frequencies employing resonant techniques. In: 2006 Asia-Pacific Microwave Conference Proceedings. pp. 572-574. From: APMC 2006 Asia Pacific Microwave Conference 2006, 12-15 December 2006, Yokohama, Japan.

Zhu, Liqun, Feng, Liu, and He, Yinghe (2005) Composite nickel coatings containing lubricating oil microcapsules and their tribological properties. Plating & Surface Finishing, 92 (6). pp. 49-53.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) A complete solution for neutral knowledge representation within collaborative product development environment. International Journal of Advanced Manufacturing Technology, 25 (7-8). pp. 761-771.

Zhou, Shouqin, and Peng, Zhongxiao (2005) A RFID based visible information flow for enterprise internal production management over the internet. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing. pp. 280-285. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) An internet-based system for remote condition monitoring. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing. pp. 286-291. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Zhou, S.Q., Zhao, A.P., Chin, K.S., Yarlagadda, P.K.D.V., and Peng, Z. (2004) A solution for knowledge resources provider over the internet. International Journal of Advanced Manufacturing Technology, 24 (1). pp. 148-160.

Zahedi, Ahmad (2004) Fundamentals Of Electrical And Electronic Design. New World Publishing, Melbourne, VIC, Australia.

Zheng, D.Y., and Kessissoglou, N.J. (2003) On the derivation of element stiffness matrix of a cracked beam-column element. In: Proceedings ofthe 5th Asia-Pacific Structural Engineering and Construction Conference APSEC 2003. pp. 253-259. From: The 5th Asia-Pacific Structural Engineering & Construction Conference (APSEC 2003), 26-28 Aug 2003, Johor, Malaysia.

This list was generated on Sun Jan 8 08:04:37 2023 AEST.