A

Atrens, A., Dietzel, W., Bala Srinivasan, P., Winzer, N., and Kannan, M. Bobby (2011) Stress corrosion (SCC) of magnesium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 341-380.

B

Baloch, Asif A. (2018) Enhancing the corrosion resistance of a commercial magnesium alloy using polyaniline coating. Masters (Research) thesis, James Cook University.

Bazaka, Kateryna, Ketheesan, Natkunam, and Jacob, Mohan V. (2014) Polymer encapsulation of magnesium to control biodegradability and biocompatibility. Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8087-8093.

Barnes, Mark C. (2012) Examination of Gold Thin Film Growth Using the Charged Cluster Model. LAMBERT Academic Publishing (LAP), Saarbrucken, Germany.

Barnes, Mark C., Jeon, In-D., Kim, Doh-Y., and Hwang, Nong M. (2002) Generation of charged clusters during thermal evaporation of gold. Journal of Crystal Growth, 242 (3-4). pp. 455-462.

Barnes, Mark C., Kim, Doh-Y., Ahn, Hyo S., Lee, Chang O., and Hwang, Nong M. (2000) Deposition mechanism of gold by thermal evaporation: approach by charged cluster model. Journal of Crystal Growth, 213 (1-2). pp. 83-92.

C

Ceremuga, Janina, Leong, Kenneth, and Grabovickic, Robert (1996) Characterisation of high temperature superconducting films using a sapphire resonator and fitting procedures for calculations of the Q-Factor. In: Proceedings of the 11th International Microwave Conference MIKON 96. From: 11th International Microwave Conference MICON 96, 27-30 May 1996, Warsaw, Poland.

F

Fabian, Cesimiro P. (2005) Copper electrodeposition in the presence of guar or activated polyacrylamide. PhD thesis, James Cook University.

G

Gummow, Rosalind J., and He, Yinghe (2010) Morphology and preferred orientation of pulse electrodeposited magnesium. Journal of the Electrochemical Society, 157 (4). pp. 45-49.

H

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of the 11th Americas Conference on Wind Engineering. From: 11th Americas Conference on Wind Engineering, 22-26 June 2009, San Juan, Puerto Rico.

J

Jeon, In-D., Barnes, M.C., Kim, Doh-Y., and Hwang, Nong M. (2003) Origin of positive charging of nanometer-sized clusters generated during thermal evaporation of copper. Journal of Crystal Growth, 247 (3-4). pp. 623-630.

K

Kazum, Oluwole (2018) Mechanisms of hydrogen-induced cracking in ultrahigh-strength steels. PhD thesis, James Cook University.

Kannan, M. Bobby (2015) Biodegradable polymeric coatings for surface modification of magnesium-based biomaterials. In: Sankara Narayanan, T.S.N., Park, Il-Song, and Lee, Min-Ho, (eds.) Surface Modification of Magnesium and its Alloys for Biomedical Applications, Volume II: modification and coating techniques. Woodhead Publishing Series in Biomaterials, 90 . Elsevier, Cambridge, UK, pp. 355-376.

Kazum, Oluwole, Kannan, Mathan Bobby, Beladi, Hossein, Timokhina, Ilana, Hodgson, Peter, and Khoddam, Shahin (2014) Selective dissolution of retained austenite in nanostructured bainitic steels. Advanced Engineering Materials, 16 (4). pp. 442-444.

Kazum, O., Mathan, M. Bobby, Beladi, H., Timokhina, I.B., Hodgson, P.D., and Khoddam, S. (2014) Aqueous corrosion performance of nanostructured bainitic steel. Materials & Design, 54. pp. 67-71.

King, Peter C., Poole, Andrew J. , Horne, Susan, de Nys, Rocky, Gulizia, Stefan, and Jahedi, Mahnaz Z. (2013) Embedment of copper particles into polymers by cold spray. Surface and Coatings Technology, 216. pp. 60-67.

Kannan, M. Bobby, Raman, R.K. Singh, Khodham, S., and Liyanaarachchi, S. (2013) Corrosion behavior of twinning-induced plasticity (TWIP) steel. Materials and Corrosion, 64 (3). pp. 231-235.

Kazum, O., Kannan, M. Bobby, Scharnagl, N., Blawert, C., and He, Y. (2013) Electrochemical corrosion behaviour of WE54 magnesium alloy. Materials Science Forum, 765. pp. 644-647.

Kannan, M. Bobby (2013) Role of recrystallized grains on the environment-assisted cracking of aluminium-alloy. Materials Science Forum, 753. pp. 489-492.

Kannan, M. Bobby, and Dietzel, W. (2012) Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy. Materials and Design, 42. pp. 321-326.

Kannan, M. Bobby, Koc, Erkan, and Unal, Mehmet (2012) Biodegradability of β-Mg17Al12 phase in simulated body fluid. Materials Letters, 82. pp. 54-56.

Kannan, M. Bobby (2012) Enhancing the performance of calcium phosphate coating on a magnesium alloy for bioimplant applications. Materials Letters, 76. pp. 109-112.

Kannan, M. Bobby, and Saji, V.S. (2012) Nanoscience and biomaterial corrosion control. In: Saji, Viswanathan S., and Cook, Ronald, (eds.) Corrosion Protection and Control Using Nanomaterials. Elsevier, Cambridge, UK, pp. 375-392.

Kannan, M. Bobby, and He, Yinghe (2011) In-vitro degradation behavior of biodegradable polymer coated magnesium alloy. In: Proceedings of CHEMECA 2011. pp. 1-7. From: CHEMECA 2011: engineering a better world, 18-21 September 2011, Sydney, NSW, Australia.

Kannan, M. Bobby, Blawert, C., and Dietzel, W. (2011) Electrochemical corrosion behaviour of ZE41 and QE22 magnesium alloys. Materials Science Forum, 690. pp. 385-388.

Kannan, M. Bobby, Bala Srinivasan, P., and Raja, V.S. (2011) Stress corrosion cracking (SCC) of aluminium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 307-340.

Kannan, M. Bobby, and Shukla, P.K. (2011) Stress corrosion cracking (SCC) of copper and copper-based alloys. In: Raja, V.S., and Shoji, Tetsuo, (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 409-426.

Kannan, M. Bobby, and Raja, V.S (2010) Enhancing the localized corrosion resistance of high strength 7010 Al-alloy. Advanced Materials Research, 138. pp. 1-6.

Kannan, M. Bobby, and Raman, R.K. Singh (2010) A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques. Journal of biomedical materials research, 93a (3). pp. 1050-1055.

Kannan, M. Bobby, and Raja, V.S. (2009) Environmentally-assisted cracking of engineering materials – an insight. Corrosion Reviews, 27 (Supplement). pp. 147-180.

Kannan, M.Bobby, Dietzel, W., Blawert, C., Atrens, A., and Lyon, P. (2008) Stress corrosion cracking of rare-earth containing magnesium alloys ZE41, QE22 and Elektron 21 (EV31A) compared with AZ80. Materials Science and Engineering A: structural materials: properties microstructure and processing, 480 (1-2). pp. 529-539.

Kannan, M.Bobby, Bakshi, A., Raman, R.K. Singh, and Khoddam, S. (2008) Polarisation behavior of twinning induced plasticity (TWIP) steel. In: Proceedings of the Corrosion and Prevention Conference 2008. 099. pp. 1-4. From: Corrosion and Prevention 2008: the impact of corrosion on our lives, 16 - 19 November 2008 , Wellington, New Zealand.

Kannan, M. Bobby, Dietzel, W., Raman, R.K. Singh, and Lyon, P. (2007) Hydrogen-induced-cracking in magnesium alloy under cathodic polarization. Scripta Materialia, 57 (7). pp. 579-581.

Kannan, M. Bobby, and Raja, V.S. (2007) Role of coarse intermetallic particles on the environmentally assisted cracking behavior of peak aged and over aged Al–Zn–Mg–Cu–Zr alloy during slow strain rate testing. Journal of Materials Science, 42 (14). pp. 5458-5464.

Kannan, M.B., and Raja, V.S. (2007) Environmentally assisted cracking behavior of 7010 alloy. Advances in Materials Science, 7 (1). pp. 21-26.

Kannan, M. Bobby, Dietzel, W., Blawert, C., Riekehr, S., and Kocak, M. (2007) Stress corrosion cracking behavior of Nd:YAG laser butt welded AZ31 Mg sheet. Materials Science and Engineering A: structural materials: properties microstructure and processing, 444 (1-2). pp. 220-226.

Kannan, M.Bobby, and Raja, V.S. (2006) Hydrogen embrittlement susceptibility of over aged 7010 Al-alloy. Journal of Materials Science, 41 (17). pp. 5495-5499.

Kannan, M. Bobby, Raja, V.S., Mukhopadhyay, A.K., and Schmuki, P. (2005) Environmentally assisted cracking behavior of peak-aged 7010 aluminum alloy containing scandium. Metallurgical and Materials Transactions A, 36 (11). pp. 3257-3262.

L

Lins, Vanessa F.C., Branco, José R.T., Diniz, Flávio R.C., Brogan, J.C., and Berndt, Christopher C. (2007) Erosion behavior of thermal sprayed, recycled polymer and ethylene–methacrylic acid composite coatings. Wear, 262 (3-4). pp. 274-281.

Leong, Kenneth Tak Ming (2000) Precise measurements of surface resistance of high temperature superconducting thin films using a novel method of Q-factor computations for sapphire dielectric resonators in the transmission mode. PhD thesis, James Cook University.

Leong, Kenneth, and Mazierska, Janina (1998) Accounting for lossy coupling in measurements of Q-factors of transmission mode dielectric resonators. In: Proceedings of the 1998 Asia-Pacific Microwave Conference, APMC 98. pp. 209-212. From: APMC 1998: Beyond the Wireless Multimedia Society, 8-11 December 1998, Yokohama, Japan.

M

Mathan, M. Bobby, Dietzel, W., and Zettler, R. (2011) In vitro degradation behaviour of a friction stir processed magnesium alloy. Journal of Materials Science: Materials in Medicine, 22 (11). pp. 2397-2401.

Mathan, M. Bobby, and Raja, V.S. (2010) Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization. Engineering Fracture Mechanics, 77 (2). pp. 250-256.

Mathan, M. Bobby, Singh Raman, R.K., and Khoddam, S. (2008) Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and an interstitial-free steel. Corrosion Science, 50 (10). pp. 2879-2884.

Mathan, M. Bobby, and Raja, V.S. (2008) Enhancing stress corrosion cracking resistance in Al-Zn-Mg-Cu alloy through inhibiting recrystallization. In: Proceedings of 17th European Conference on Fracture. pp. 12219-1224. From: 17th European Conference on Fracture: multilevel approach to fracture of materials, components and structures, 2 - 5 September 2008, Brno, Czech Republic.

Mathan, M. Bobby, and Raja, V.S. (2007) Influence of heat treatment and scandium addition on the electrochemical polarization behavior of Al-Zn-Mg-Cu-Zr alloy. Metallurgical & Materials Transactions A, 38 (11). pp. 2843-2852.

Mathan, M. Bobby, Dietzel, W, Zeng, R, Zettler, R, and Dos Santos, J.F (2007) A study on the SCC susceptibility of friction stir welded AZ31 Mg sheet. Materials Science and Engineering, 460 ( ). pp. 243-250.

Mathan, M. Bobby, Raja, V.S., and Mukhopadhyay, A.K. (2004) Determination of true stress corrosion cracking susceptibility index of a high strength Al alloy using glycerin as the non-corrosive atmosphere. Scripta Materialia, 51 (11). pp. 1075-1079.

R

Rahuma, Mohammed Nuri, and M., Bobby Kannan (2014) Corrosion in oil and gas industry: a perspective on corrosion inhibitors. Journal of Material Science & Engineering, 3 (3). e110. p. 1.

S

Saxena, A., Raman, R.K. Singh, and Kannan, M. Bobby (2008) Laser assisted surface modification of AZ91 alloy: microstructural and electrochemical study. Transactions of the Indian Institute of Metals, 61 (2-3). pp. 121-124.

Sieber, I., Kannan, B., and Schmuki, P. (2005) Self-assembled porous tantalum oxide prepared in H2SO4/HF electrolytes. Electrochemical and Solid-State Letters, 8 (3). pp. 10-12.

V

Vucko, M.J., King, P.C., Poole, A.J., Hu, Yi, Jahedi, M.Z., and de Nys, R. (2014) Assessing the antifouling properties of cold-spray metal embedment using loading density gradients of metal particles. Biofouling, 30 (6). pp. 651-666.

Vučko, Matthew John (2014) Innovative antifouling technologies: microtexture and metal. PhD thesis, James Cook University.

Vucko, M.J., Poole, A.J., Carl, C., Sexton, B.A., Glenn, F.L., Whalan, S., and de Nys, R. (2014) Using textured PDMS to prevent settlement and enhance release of marine fouling organisms. Biofouling, 30 (1). pp. 1-16.

Vucko, M.J., King, P.C, Poole, A.J., Jahedi, M.Z, and De Nys, R. (2013) Polyurethane seismic streamer skins: an application of cold spray metal embedment. Biofouling, 29 (1). pp. 1-9.

Vucko, M.V., King, P.C., Poole, A.J., Carl, C., Jahedi, M.Z., and de Nys, R. (2012) Cold spray metal embedment: an innovative antifouling technology. Biofouling, 28 (3). pp. 239-248.

W

Walter, Rhys (2015) Understanding and improving the degradation behaviour of magnesium-based biomaterials. PhD thesis, James Cook University.

Walter, R., and Kannan, M. Bobby (2011) Influence of surface roughness on the corrosion behaviour of magnesium alloy. Materials & Design, 32 (4). pp. 2350-2354.

Wheatley, H. Gregory (2001) Influence of tensile overload on crack growth in 316L stainless-steel - including high strain & low stress interactions in 316l stainless steel, mild steel and aluminium alloy 6060-T5. PhD thesis, University of Western Australia.

Wheatley, G., Niefanger, R., Estrin, Y., and Hu, X.Z. (1998) Fatigue crack growth in 316L stainless steel. Key Engineering Materials, 145-149. pp. 631-636.

Y

Yang, Yue, Xu, Shengming, Xie, Ming, He, Yinghe, Huang , Guoyong, and Yang , Youcai (2015) Growth mechanisms for spherical mixed hydroxide agglomerates prepared by co-precipitation method: a case of Ni1/3Co1/3Mn1/3(OH)2. Journal of Alloys and Compounds, 619. pp. 846-853.

Yao, X. (2006) Effect of solute redistribution on the growth kinetics in solidification. International Journal of Modern Physics B, 20 (25-27). pp. 3938-3943.

Yao, X., and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128.

Yao, X. (2006) On the solute coupling at the moving solid-liquid interface during equiaxed solidification. Applied Physics Letters, 89 (7). pp. 71903-71905.

Yao, X. (2006) Modeling and experimental study of the interface morphology and growth kinetics for fibrous growth of eutectic. Journal of Materials Research, 21 (12). pp. 3009-3016.