Items where Subject is "09 ENGINEERING > 0912 Materials Engineering > 091207 Metals and Alloy Materials"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 61.


Yang, Yue, Huang, Guoyong, Xu, Shengming, He, Yinghe, and Liu, Xin (2016) Thermal treatment process for the recovery of valuable metals from spent lithium-ion batteries. Hydrometallurgy. (In Press)

Yang, Yue, Huang, Guoyong, Xie , Ming, Xu, Shengming, and He, Yinghe (2015) Synthesis and performance of spherical LiNixCoyMn1-x-yO2 regenerated from nickel and cobalt scraps. Hydrometallurgy. pp. 1-12. (In Press)

Yang, Yue, Xu, Shengming, Xie, Ming, He, Yinghe, Huang , Guoyong, and Yang , Youcai (2015) Growth mechanisms for spherical mixed hydroxide agglomerates prepared by co-precipitation method: a case of Ni1/3Co1/3Mn1/3(OH)2. Journal of Alloys and Compounds, 619. pp. 846-853.

Bazaka, Kateryna, Ketheesan, Natkunam, and Jacob, Mohan V. (2014) Polymer encapsulation of magnesium to control biodegradability and biocompatibility. Journal of Nanoscience and Nanotechnology, 14 (10). pp. 8087-8093.

Kazum, Oluwole, Kannan, Mathan Bobby, Beladi, Hossein, Timokhina, Ilana, Hodgson, Peter, and Khoddam, Shahin (2014) Selective dissolution of retained austenite in nanostructured bainitic steels. Advanced Engineering Materials, 16 (4). pp. 442-444.

Vucko, M.J., King, P.C., Poole, A.J., Hu, Yi, Jahedi, M.Z., and de Nys, R. (2014) Assessing the antifouling properties of cold-spray metal embedment using loading density gradients of metal particles. Biofouling, 30 (6). pp. 651-666.

Kazum, O., Mathan, M. Bobby, Beladi, H., Timokhina, I.B., Hodgson, P.D., and Khoddam, S. (2014) Aqueous corrosion performance of nanostructured bainitic steel. Materials & Design, 54. pp. 67-71.

Rahuma, Mohammed Nuri, and M., Bobby Kannan (2014) Corrosion in oil and gas industry: a perspective on corrosion inhibitors. Journal of Material Science & Engineering, 3 (3). p. 1.

Vucko, M.J., Poole, A.J., Carl, C., Sexton, B.A., Glenn, F.L., Whalan, S., and de Nys, R. (2014) Using textured PDMS to prevent settlement and enhance release of marine fouling organisms. Biofouling, 30 (1). pp. 1-16.

King, Peter C., Poole, Andrew J. , Horne, Susan, de Nys, Rocky, Gulizia, Stefan, and Jahedi, Mahnaz Z. (2013) Embedment of copper particles into polymers by cold spray. Surface and Coatings Technology, 216. pp. 60-67.

Kannan, M. Bobby, Raman, R.K. Singh, Khodham, S., and Liyanaarachchi, S. (2013) Corrosion behavior of twinning-induced plasticity (TWIP) steel. Materials and Corrosion, 64 (3). pp. 231-235.

Kazum, O., Kannan, M. Bobby, Scharnagl, N., Blawert, C., and He, Y. (2013) Electrochemical corrosion behaviour of WE54 magnesium alloy. Materials Science Forum, 765. pp. 644-647.

Vucko, M.J., King, P.C, Poole, A.J., Jahedi, M.Z, and De Nys, R. (2013) Polyurethane seismic streamer skins: an application of cold spray metal embedment. Biofouling, 29 (1). pp. 1-9.

Kannan, M. Bobby (2013) Role of recrystallized grains on the environment-assisted cracking of aluminium-alloy. Materials Science Forum, 753. pp. 489-492.

Kannan, M. Bobby, and Dietzel, W. (2012) Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy. Materials and Design, 42. pp. 321-326.

Kannan, M. Bobby, Koc, Erkan, and Unal, Mehmet (2012) Biodegradability of β-Mg17Al12 phase in simulated body fluid. Materials Letters, 82. pp. 54-56.

Kannan, M. Bobby (2012) Enhancing the performance of calcium phosphate coating on a magnesium alloy for bioimplant applications. Materials Letters, 76. pp. 109-112.

Vucko, M.V., King, P.C., Poole, A.J., Carl, C., Jahedi, M.Z., and de Nys, R. (2012) Cold spray metal embedment: an innovative antifouling technology. Biofouling, 28 (3). pp. 239-248.

Mathan, M. Bobby, Dietzel, W., and Zettler, R. (2011) In vitro degradation behaviour of a friction stir processed magnesium alloy. Journal of Materials Science: Materials in Medicine, 22 (11). pp. 2397-2401.

Kannan, M. Bobby, Blawert, C., and Dietzel, W. (2011) Electrochemical corrosion behaviour of ZE41 and QE22 magnesium alloys. Materials Science Forum, 690. pp. 385-388.

Walter, R., and Kannan, M. Bobby (2011) Influence of surface roughness on the corrosion behaviour of magnesium alloy. Materials & Design, 32 (4). pp. 2350-2354.

Kannan, M. Bobby, and Raja, V.S (2010) Enhancing the localized corrosion resistance of high strength 7010 Al-alloy. Advanced Materials Research, 138. pp. 1-6.

Kannan, M. Bobby, and Raman, R.K. Singh (2010) A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques. Journal of biomedical materials research, 93a (3). pp. 1050-1055.

Mathan, M. Bobby, and Raja, V.S. (2010) Enhancing stress corrosion cracking resistance in Al–Zn–Mg–Cu–Zr alloy through inhibiting recrystallization. Engineering Fracture Mechanics, 77 (2). pp. 250-256.

Gummow, Rosalind J., and He, Yinghe (2010) Morphology and preferred orientation of pulse electrodeposited magnesium. Journal of the Electrochemical Society, 157 (4). pp. 45-49.

Kannan, M. Bobby, and Raja, V.S. (2009) Environmentally-assisted cracking of engineering materials – an insight. Corrosion Reviews, 27 (Supplement). pp. 147-180.

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Mathan, M. Bobby, Singh Raman, R.K., and Khoddam, S. (2008) Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and an interstitial-free steel. Corrosion Science, 50 (10). pp. 2879-2884.

Kannan, M.Bobby, Dietzel, W., Blawert, C., Atrens, A., and Lyon, P. (2008) Stress corrosion cracking of rare-earth containing magnesium alloys ZE41, QE22 and Elektron 21 (EV31A) compared with AZ80. Materials Science and Engineering A: structural materials: properties microstructure and processing, 480 (1-2). pp. 529-539.

Saxena, A., Raman, R.K. Singh, and Kannan, M. Bobby (2008) Laser assisted surface modification of AZ91 alloy: microstructural and electrochemical study. Transactions of the Indian Institute of Metals, 61 (2-3). pp. 121-124.

Mathan, M. Bobby, and Raja, V.S. (2007) Influence of heat treatment and scandium addition on the electrochemical polarization behavior of Al-Zn-Mg-Cu-Zr alloy. Metallurgical & Materials Transactions A, 38 (11). pp. 2843-2852.

Kannan, M. Bobby, Dietzel, W., Raman, R.K. Singh, and Lyon, P. (2007) Hydrogen-induced-cracking in magnesium alloy under cathodic polarization. Scripta Materialia, 57 (7). pp. 579-581.

Mathan, M. Bobby, Dietzel, W, Zeng, R, Zettler, R, and Dos Santos, J.F (2007) A study on the SCC susceptibility of friction stir welded AZ31 Mg sheet. Materials Science and Engineering, 460 ( ). pp. 243-250.

Kannan, M. Bobby, and Raja, V.S. (2007) Role of coarse intermetallic particles on the environmentally assisted cracking behavior of peak aged and over aged Al–Zn–Mg–Cu–Zr alloy during slow strain rate testing. Journal of Materials Science, 42 (14). pp. 5458-5464.

Kannan, M.B., and Raja, V.S. (2007) Environmentally assisted cracking behavior of 7010 alloy. Advances in Materials Science, 7 (1). pp. 21-26.

Lins, Vanessa F.C., Branco, José R.T., Diniz, Flávio R.C., Brogan, J.C., and Berndt, Christopher C. (2007) Erosion behavior of thermal sprayed, recycled polymer and ethylene–methacrylic acid composite coatings. Wear, 262 (3-4). pp. 274-281.

Kannan, M. Bobby, Dietzel, W., Blawert, C., Riekehr, S., and Kocak, M. (2007) Stress corrosion cracking behavior of Nd:YAG laser butt welded AZ31 Mg sheet. Materials Science and Engineering A: structural materials: properties microstructure and processing, 444 (1-2). pp. 220-226.

Yao, X. (2006) Effect of solute redistribution on the growth kinetics in solidification. International Journal of Modern Physics B, 20 (25-27). pp. 3938-3943.

Yao, X., and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128.

Yao, X. (2006) On the solute coupling at the moving solid-liquid interface during equiaxed solidification. Applied Physics Letters, 89 (7). pp. 71903-71905.

Kannan, M.Bobby, and Raja, V.S. (2006) Hydrogen embrittlement susceptibility of over aged 7010 Al-alloy. Journal of Materials Science, 41 (17). pp. 5495-5499.

Yao, X. (2006) Modeling and experimental study of the interface morphology and growth kinetics for fibrous growth of eutectic. Journal of Materials Research, 21 (12). pp. 3009-3016.

Kannan, M. Bobby, Raja, V.S., Mukhopadhyay, A.K., and Schmuki, P. (2005) Environmentally assisted cracking behavior of peak-aged 7010 aluminum alloy containing scandium. Metallurgical and Materials Transactions A, 36 (11). pp. 3257-3262.

Sieber, I., Kannan, B., and Schmuki, P. (2005) Self-assembled porous tantalum oxide prepared in H2SO4/HF electrolytes. Electrochemical and Solid-State Letters, 8 (3). pp. 10-12.

Mathan, M. Bobby, Raja, V.S., and Mukhopadhyay, A.K. (2004) Determination of true stress corrosion cracking susceptibility index of a high strength Al alloy using glycerin as the non-corrosive atmosphere. Scripta Materialia, 51 (11). pp. 1075-1079.

Jeon, In-D., Barnes, M.C., Kim, Doh-Y., and Hwang, Nong M. (2003) Origin of positive charging of nanometer-sized clusters generated during thermal evaporation of copper. Journal of Crystal Growth, 247 (3-4). pp. 623-630.

Barnes, Mark C., Jeon, In-D., Kim, Doh-Y., and Hwang, Nong M. (2002) Generation of charged clusters during thermal evaporation of gold. Journal of Crystal Growth, 242 (3-4). pp. 455-462.

Barnes, Mark C., Kim, Doh-Y., Ahn, Hyo S., Lee, Chang O., and Hwang, Nong M. (2000) Deposition mechanism of gold by thermal evaporation: approach by charged cluster model. Journal of Crystal Growth, 213 (1-2). pp. 83-92.

Book Chapter

Kannan, M. Bobby (2015) Biodegradable polymeric coatings for surface modification of magnesium-based biomaterials. In: Sankara Narayanan, T.S.N., Park, Il-Song, and Lee, Min-Ho, (eds.) Surface Modification of Magnesium and its Alloys for Biomedical Applications, Volume II: modification and coating techniques. Woodhead Publishing Series in Biomaterials, 90 . Elsevier, Cambridge, UK, pp. 355-376.

Kannan, M. Bobby, and Saji, V.S. (2012) Nanoscience and biomaterial corrosion control. In: Saji, Viswanathan S., and Cook, Ronald, (eds.) Corrosion Protection and Control Using Nanomaterials. Elsevier, Cambridge, UK, pp. 375-392.

Atrens, A., Dietzel, W., Bala Srinivasan, P., Winzer, N., and Kannan, M. Bobby (2011) Stress corrosion (SCC) of magnesium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 341-380.

Kannan, M. Bobby, Bala Srinivasan, P., and Raja, V.S. (2011) Stress corrosion cracking (SCC) of aluminium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 307-340.

Kannan, M. Bobby, and Shukla, P.K. (2011) Stress corrosion cracking (SCC) of copper and copper-based alloys. In: Raja, V.S., and Shoji, Tetsuo, (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 409-426.

Conference Item

Kannan, M. Bobby, and He, Yinghe (2011) In-vitro degradation behavior of biodegradable polymer coated magnesium alloy. In: Proceedings of CHEMECA 2011, pp. 1-7. From: CHEMECA 2011: engineering a better world, 18-21 September 2011, Sydney, NSW, Australia.

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of 11th Americas Conference on Wind Engineering, pp. 1-12. From: 11th Americas Conference on Wind Engineering, 22 - 26 June 2009, San Juan, Puerto Rico.

Mathan, M. Bobby, and Raja, V.S. (2008) Enhancing stress corrosion cracking resistance in Al-Zn-Mg-Cu alloy through inhibiting recrystallization. In: Proceedings of 17th European Conference on Fracture, pp. 12219-1224. From: 17th European Conference on Fracture: multilevel approach to fracture of materials, components and structures, 2 - 5 September 2008, Brno, Czech Republic.

Kannan, M.Bobby, Bakshi, A., Raman, R.K. Singh, and Khoddam, S. (2008) Polarisation behavior of twinning induced plasticity (TWIP) steel. In: Proceedings of the Corrosion and Prevention Conference 2008, pp. 1-4. From: Corrosion and Prevention 2008: the impact of corrosion on our lives, 16 - 19 November 2008 , Wellington, New Zealand.


Barnes, Mark C. (2012) Examination of Gold Thin Film Growth Using the Charged Cluster Model. LAMBERT Academic Publishing (LAP), Saarbrucken, Germany.


Vučko, Matthew John (2014) Innovative antifouling technologies: microtexture and metal. PhD thesis, James Cook University.

Fabian, Cesimiro P. (2005) Copper electrodeposition in the presence of guar or activated polyacrylamide. PhD thesis, James Cook University.

Leong, Kenneth Tak Ming (2000) Precise measurements of surface resistance of high temperature superconducting thin films using a novel method of Q-factor computations for sapphire dielectric resonators in the transmission mode. PhD thesis, James Cook University.

This list was generated on Thu May 5 23:07:10 2016 EST.