Items where Subject is "09 ENGINEERING > 0903 Biomedical Engineering > 090301 Biomaterials"
|Up a level|
Kannan, M. Bobby, Walter, R., and Yamamoto, A. (2016) Biocompatibility and in vitro degradation behavior of magnesium–calcium alloy coated with calcium phosphate using an unconventional electrolyte. ACS Biomaterials Science & Engineering, 2 (1). pp. 56-64.
Kannan, M. Bobby (2016) Electrochemical deposition of calcium phosphates on magnesium and its alloys for improved biodegradation performance: a review. Surface and Coatings Technology. pp. 1-6. (In Press)
Surmeneva, Maria A., Mukhametkaliyev, Timur M., Khakbaz, Hadis, Surmenev, Roman A., and Kannan, M. Bobby (2015) Ultrathin film coating of hydroxyapatite (HA) on a magnesium–calcium alloy using RF magnetron sputtering for bioimplant applications. Materials Letters, 152. pp. 280-282.
Walter, R., and Mathan, M. Bobby (2015) A mechanistic in vitro study of the microgalvanic degradation of secondary phase particles in magnesium alloys. Journal of Biomedical Materials Research Part A, 103 (3). pp. 990-1000.
Kannan, M. Bobby, Yamamoto, A., and Khakbaz, Hadis (2015) Influence of living cells (L929) on the biodegradation of magnesium–calcium alloy. Colloids and Surfaces B: Biointerfaces, 126. pp. 603-606.
Kesteven, Jazmin, Mathan, M. Bobby, Walter, Rhys, Khakbaz, Hadis, and Choe, Han-Choel (2015) Low elastic modulus Ti–Ta alloys for load-bearing permanent implants: enhancing the biodegradation resistance by electrochemical surface engineering. Materials Science and Engineering C, 46. pp. 226-231.
Koc, Erkan, Mathan, Bobby, Unal, Mehmet, and Candan, Ercan (2015) Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium–zinc binary alloys. Journal of Alloys and Compounds, 648 (5). pp. 291-296.
Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2014) Influence of the cathodic activity of magnesium alloys on the electrochemical deposition of calcium phosphate. Materials Letters, 130. pp. 184-187.
Alabbasi, Alyaa, Kannan, M. Bobby, and Blawert, C. (2014) Dual layer inorganic coating on magnesium for delaying the biodegradation for bone fixation implants. Materials Letters, 124. pp. 188-191.
Alabbasi, Alyaa, Mehjabeen, Afrin, Kannan, M. Bobby, Ye, Qingsong, and Blawert, Carsten (2014) Biodegradable polymer for sealing porous PEO layer on pure magnesium: an in vitro degradation study. Applied Surface Science, 301. pp. 463-467.
Kannan, M. Bobby (2014) Challenges and opportunities in electrochemically coating calcium phosphate on magnesium alloys for biodegradable implant applications. Materials Science Forum, 783-786. pp. 1269-1273.
Khakbaz, Hadis, Walter, Rhys, Gordon, Timothy, and Mathan, M. Bobby (2014) Self-dissolution assisted coating on magnesium metal for biodegradable bone fixation devices. Materials Research Express, 1 (4). pp. 1-9.
Ivanova, Elena P., Hasan, Jafar, Webb, Hayden K., Gervinskas, Gediminas, Juodkazis, Saulius, Truong, Vi Khanh, Wu, Alex H.F., Lamb, Robert N., Baulin, Vladimir A., Watson, Gregory S., Watson, Jolanta A., Mainwaring, David E., and Crawford, Russell J. (2013) Bactericidal activity of black silicon. Nature Communications, 4. pp. 1-7.
Kannan, M. Bobby , and Liyanaarachchi, S. (2013) Hybrid coating on a magnesium alloy for minimizing the localized degradation for load-bearing biodegradable mini-implant applications. Materials Chemistry and Physics, 142 (1). pp. 350-354.
Togo, Yumiko , Takahashi, Katsu, Saito, Kazuyuki, Kiso, Honoka, Huang, Boyen, Tsukamoto, Hiroko, Hyon, Suong-Hyu, and Bessho, Kazuhisa (2013) Aldehyded dextran and ε-poly(l-lysine) hydrogel as nonviral gene carrier. Stem Cells International, 2013. pp. 1-5.
Tobin, Mark J., Puskar, Ljiljana, Hasan, Jafar, Webb, Hayden K., Hirschmugl, Carol J., Nasse, Michael J., Gervinskas, Gediminas, Juodkazis, Saulius, Watson, Gregory S., Watson, Jolanta A., Crawford, Russell J., and Ivanova, Elena P. (2013) High-spatial-resolution mapping of superhydrophobic cicada wing surface chemistry using infrared microspectroscopy and infrared imaging at two synchrotron beamlines. Journal of Synchrotron Radiation, 20 (3). pp. 482-489.
Kannan, M. Bobby (2013) Improving the packing density of calcium phosphate coating on a magnesium alloy for enhanced degradation resistance. Journal of Biomedical Materials Research Part A, 101A (5). pp. 1248-1254.
Pogodin, Sergey, Hasan, Jafar, Baulin, Vladimir A., Webb, Hayden K., Truong, Vi Khanh, Nguyen, The Hong Phong, Boshkovikj, Veselin, Fluke, Christopher J., Watson, Gregory S., Watson, Jolanta A., Crawford, Russell J., and Ivanova, Elena P. (2013) Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces. Biophysical Journal, 104 (4). pp. 835-840.
Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2013) Effect of surface roughness on the in vitro degradation behaviour of a biodegradable magnesium-based alloy. Applied Surface Science, 279. pp. 343-348.
Bazaka, Kateryna, and Jacob, Mohan V. (2013) Implantable devices: issues and challenges. Electronics, 2 (1). pp. 1-34.
Alabbasi, Alyaa, Kannan, M. Bobby, Walter, Rhys, Störmer, M., and Blawert, C. (2013) Performance of pulsed constant current silicate-based PEO coating on pure magnesium in simulated body fluid. Materials Letters, 106. pp. 18-21.
Kannan, M. Bobby, and Wallipa, O. (2013) Potentiostatic pulse-deposition of calcium phosphate on magnesium alloy for temporary implant applications: an in vitro corrosion study. Materials Science and Engineering C, 33 (2). pp. 675-679.
M, Bobby Kannan (2013) An outlook on magnesium-based biodegradable implants. Journal of Material Science & Engineering, 2 (1). pp. 1-2.
Bazaka, Kateryna, and Jacob, Mohan V. (2012) Solubility and surface interactions of RF plasma polymerized polyterpenol thin films. Materials Express, 2 (4). pp. 285-293.
Xie, Huixu, Wang, Qianbin, Ye, Quingsong, Wan, Changxiu, and Li, Longjiang (2012) Application of K/Sr co-doped calcium polyphosphate bioceramic as scaffolds for bone substitutes. Journal of Materials Science, 23 (4). pp. 1033-1044.
Alabbasi, Alyaa, Liyanaarachchi, S., and Kannan, M.B. (2012) Polylactic acid coating on a biodegradable magnesium alloy: an in vitro degradation study by electrochemical impedance spectroscopy. Thin Solid Films, 520 (23). pp. 6841-6844.
Ye, Q., van Amerongen, M.J., Sandham, J.A., Bank, R.A., van Luyn, M.J.A., and Harmsen, M.C. (2011) Site-specific tissue inhibitor of metalloproteinase-1 governs the matrix metalloproteinases-dependent degradation of crosslinked collagen scaffolds and is correlated with interleukin-10. Journal of Tissue Engineering and Regenerative Medicine, 5 (4). pp. 264-274.
Walter, R., and Kannan, M. Bobby (2011) In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Materials Letters, 65 (4). pp. 748-750.
Kannan, M. Bobby, Raman, R.K. Singh, Witte, F., Blawert, C., and Dietzel, W. (2011) Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 96B (2). pp. 303-309.
Ye, Qingsong, Harmsen, Martin C., Ren, Yijin, and Bank, Ruud A. (2011) The role of collagen receptors Endo180 and DDR-2 in the foreign body reaction against non-crosslinked collagen and gelatin. Biomaterials, 32 (5). pp. 1339-1350.
Ye, Qingsong, Harmsen, Martin C., van Luyn, Marja J.A., and Bank, Ruud A. (2010) The relationship between collagen scaffold cross-linking agents and neutrophils in the foreign body reaction. Biomaterials, 31 (35). pp. 9192-9201.
Kannan, M. Bobby (2010) Influence of microstructure on the in-vitro degradation behaviour of magnesium alloys. Materials Letters, 64 (6). pp. 739-742.
Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of microstructure on micromechanical performance of dry cortical bone tissues. Materials Characterization, 60 (12). pp. 1424-1431.
Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of cryo-induced microcracks on microindentation of hydrated cortical bone tissue. Materials Characterization, 60 (8). pp. 283-291.
Song , Xiao-Fei, Yin, Ling, and Han, Yi-Gang (2009) In-process assessment of dental cutting of a leucite-reinforced glass–ceramic. Medical Engineering and Physics, 31 (2). pp. 214-220.
Song, Xiao-Fei, and Yin, Ling (2009) Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. Journal of Biomechanics, 42 (3). pp. 355-360.
Yin, Ling (2009) Abrasive technology in ceramic restorative dentistry. Advanced Materials Research, 76-78 (12). pp. 363-369.
Kannan, M. Bobby, and R.K. Singh, Raman (2009) Magnesium alloys as biodegradable implants. Materials Science Forum, 618-619. pp. 83-86.
Venkatesan, Sudharshan, Yin, Ling, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Study on the real time strain measurement system for analysis of strain evolution and failure behavior of cortical bone materials. Materials Forum, 33. pp. 46-52.
Kannan, M. Bobby, and Raman, R.K. Singh (2008) Evaluating the stress corrosion cracking susceptibility of Mg–Al–Zn alloy in modified-simulated body fluid for orthopaedic implant application. Scripta Materialia, 59 (2). pp. 175-178.
Kannan, M. Bobby, and Raman, R.K. Singh (2008) In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid. Biomaterials, 29 (15). pp. 2306-2314.
Mathan, M. Bobby (2007) Laser treated magnesium-based alloy: A potential candidate for biodegradable implants. Hong Kong Institution of Engineers Transactions, 14 (4). pp. 1-4.
Palermo, E., Si, M., Occhiogrosso, R., Berndt, C., Rudomen, Gregory, and Rafailovich, M. (2005) Effects of supercritical carbon dioxide on phase homogeneity, morphology and mechanical properties of poly(styrene-blend-ethylene-stat-vinyl acetate). Macromolecules, 38 (22). pp. 9180-9186.
Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.
Li, Wei, Swain, Michael V., Li, Qing, and Steven, Grant P. (2005) Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: applied biomaterials, 74B (1). pp. 520-528.
Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.
Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part I: experimental investigation. Biomaterials, 25 (20). pp. 4987-4993.
Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part II: numerical investigation. Biomaterials, 25 (20). pp. 4995-5001.
Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.
Bobby-Kannan, M., Raja, V. S., Raman, R., and Mukhopadhyay, A. K. (2003) Influence of multistep aging on the stress corrosion cracking behavior of aluminum alloy 7010. Corrosion, 59 (10). pp. 881-889.
Limin, Sun, Berndt, CC, Gross, KA, and Kucuk, A (2001) Material fundamentals and clinical performance of Plasma- Sprayed Hydroxyapatite Coatings: A review. Journal of biomedical materials research, 58 (5). pp. 570-592.
Kannan, M.B. (2015) Hydroxyapatite coating on biodegradable magnesium and magnesium-based alloys. In: Mucalo, Michael, (ed.) Hydroxyapatite (HAp) for Biomedical Applications. Woodhead Publishing Series in Biomaterials (95). Elsevier, Cambridge, UK, pp. 289-306.
Blawert, C., Sah, S.P., Scharnagl, Nico, and Kannan, M. Bobby (2015) Plasma electrolytic oxidation/micro-arc oxidation of magnesium and its alloys. In: Sankara Narayanan, T.S.N., Park, Il-Song, and Lee, Min-Ho, (eds.) Surface Modification of Magnesium and its Alloys for Biomedical Applications, Volume II: modification and coating techniques. Woodhead Publishing Series in Biomaterials, 90 . Elsevier, Cambridge, UK, pp. 193-234.
Mukhametkaliyev, T., Surmeneva, M., Surmenev, R., and Mathan, B.K. (2015) Hydroxyapatite coating on biodegradable AZ31 and Mg-Ca alloys prepared by RF-magnetron sputtering. In: American Institute of Physics Conference Proceedings (1688), 030006-1. From: NEWOT 2015: 5th International Scientific Conference "New Operational Technologies", 29-30 September 2015, Tomsk, Russia.
Kannan, M. Bobby (2014) Biodegradation of secondary phase particles in magnesium alloys: a critical review. In: Proceedings of the 19th International Corrosion Congress. From: ICC 2014: 19th International Corrosion Congress, 2-6 November 2014, Jeju, Korea.
Walter, Rhys, Mehjabeen, Afrin, Gordon, Timothy, Kannan, M. Bobby, and UNSPECIFIED (2013) precipitation of struvite on pure magnesium and in vitro degradation behaviour. In: Proceedings of the CHEMECA 2013. From: CHEMECA 2013, 29 September - 2 October 2013, Brisbane, QLD, Australia.
Kannan, M. Bobby, and Raman, R.K. Singh (2008) Stress corrosion cracking behaviour of biodegradable magnesium-based alloy in simulated physiological condition. In: Proceedings of the Corrosion and Prevention Conference 2008, pp. 1-4. From: Corrosion and Prevention 2008: the impact of corrosion on our lives, 16 - 19 November 2008 , Wellington, New Zealand.
Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists, pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.
Sun, L., Berndt, C.C., and Gross, K.A. (2005) Phase formation mechanisms in plasma sprayed hydroxyapatite coatings. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.
Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics, pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.
Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.
Walter, Rhys (2015) Understanding and improving the degradation behaviour of magnesium-based biomaterials. PhD thesis, James Cook University.
Alabbasi, Alyaa (2015) Enhanced degradation resistance of metallic magnesium using biocompatible coatings for implant applications. Masters (Research) thesis, James Cook University.
Ye, Qingsong (2013) Molecular and cellular mechanisms of collagen degradation in the foreign body reaction. PhD thesis, University of Groningen.
Scardino, Andrew J. (2006) Biomimetic fouling control. PhD thesis, James Cook University.