Items where Subject is "09 ENGINEERING > 0912 Materials Engineering > 091299 Materials Engineering not elsewhere classified"
|Up a level|
Bazaka, K., Jacob, M.V., Chrzanowski, W., and Ostrikov, K. (2015) Anti-bacterial surfaces: natural agents, mechanisms of action, and plasma surface modification. RSC Advances, 5 (60). pp. 48739-48759.
Berndt, Christopher C., and Hodzic, Alma (2007) Bagasse fibre for sustainable manufacturing. Journal of Biobased Materials and Bioenergy, 1 (3). pp. 289-300.
Berndt, Christopher C., and Montavon, Ghislain (2006) Thermal spray: preserving 100 years of technology. Journal of Thermal Spray Technology, 15 (1). pp. 5-8.
Carl, C., Poole, A.J., Sexton, B.A., Glenn, F.L., Vucko, M.J., Williams, M.R., Whalan, S., and de Nys, R. (2012) Enhancing the settlement and attachment strength of pediveligers of Mytilus galloprovincialis by changing surface wettability and microtopography. Biofouling, 28 (2). pp. 175-186.
Ceremuga, Janina, Krupka, Jerzy, and Kościuk, Tomasz (1995) Resonant measurements of surface resistance of high-T(c) superconducting films: how good or bad are they? Journal of Superconductivity, 8 (6). pp. 681-689.
Hodzic, Alma, Coakley, Richard, Curro, Ray, Berndt, Christopher C., and Shanks, Robert A. (2007) Design and optimization of biopolyester bagasse fiber composites. Journal of Biobased Materials and Bioenergy, 1 (1). pp. 46-55.
Jacob, Mohan V., Rawat, Rajdeep S., Ouyang, Bo, Bazaka, Kateryna, Kumar, D. Sakthi, Taguchi, Dai, Iwamoto, Mitsumasa, Neupane, Ram, and Varghese, Oomman K. (2015) Catalyst-free plasma enhanced growth of graphene from sustainable sources. Nano Letters. (In Press)
Jacob, Mohan (2015) Organic Semiconductors. MDPI Books, Basel, Switzerland.
Jacob, Mohan V. (2014) Organic semiconductors: past, present and future. Electronics, 3 (4). pp. 594-597.
Jacob, Mohan (2011) Non-Linear Surface Impedance of YBCO Superconductors. Lambert Academic Publishing, Germany.
Krupka, Jerzy, and Mazierska, Janina (2011) Current developments in contactless measurements of high quality materials for microelectronics and nanotechnology employing dielectric resonator techniques. In: Proceedings of the 2011 IEEE Region 10 Conference, pp. 1126-1130. From: TENCON 2011: 2011 IEEE Region 10 Conference, 22-24 November 2011, Bali, Indonesia.
Krupka, Jerzy, Nguyen, Danh, and Mazierska, Janina (2011) Microwave and RF methods of contactless mapping of the sheet resistance and the complex permittivity of conductive materials and semiconductors. Measurement Science and Technology, 22 (8). pp. 1-6.
Knack, Adrian P., Kolesov, Sergei, and Mazierska, Janina (2005) CDMA coverage capacity uplink model: an assessment of implementing superconducting technology in CDMA cellular networks. In: Proceedings of Asia Pacific Microwave Conference 2005, pp. 1692-1695. From: Asia Pacific Microwave Conference 2005, 4 - 7 December 2005, Suzhou, China.
Lu, Tao, Yao, Xiangdong, Lu, Gao Qing, and He, Yinghe (2009) Controlled evolution from multilamellar vesicles to hexagonal mesostructures through the addition of 1,3,5-trimethylbenzene. Journal of Colloid and Interface Science, 336 (1). pp. 368-373.
Louden, D., Inderbitzin, Stefanie, Peng, Z., and de Nys, R. (2007) Development of a new protocol for testing bath sponge quality. Aquaculture, 271 (1-4). pp. 275-285.
Mazierska, Janina, Krupka, Jerzy, and Wosik, J. (2012) Measurements of intrinsic losses of high temperature superconducting thin films: surface resistance and conductivity. In: International Symposium on High Temperature Superconductors in High Frequency Fields, pp. 7-8. From: 11th International Symposium on High Temperature Superconductors in High Frequency Fields, 29 May - 1 June 2012, Yamagata University, Japan.
Mazierska, Janina (2009) Microwave characterization of materials for telecommunication systems. In: Proceedings of the 2009 IEEE Youth Conference on Information, Computing and Telecommunications, p. 1. From: YC-ICT 2009: 2009 IEEE Youth Conference on Information, Computing and Telecommunications, 20-21 September 2009, Bejing, China.
Ouyang, Bo, Jacob, Mohan V., and Rawat, R.S. (2015) Free standing 3D graphene nano-mesh synthesis by RF plasma CVD using non-synthetic precursor. Materials Research Bulletin, 71. pp. 61-66.
Song, Xiao-Fei, Jin, Chen-Xin, and Yin, Ling (2015) Quantitative assessment of the enamel machinability in tooth preparation with dental diamond burs. Journal of The Mechanical Behavior of Biomedical Materials, 41. pp. 1-12.
Sun, Mingxia, Watson, Gregory S., Zheng, Yongmei, Watson, Jolanta A., and Liang, Aiping (2009) Wetting properties on nanostructured surfaces of cicada wings. Journal of Experimental Biology, 212 (19). pp. 3148-3155.
Savvides, Nick, Katsaros, Alex, Reilly, David, Foley, Cathy, Leong, Kenneth, and Ceremuga, Janina (1996) Microwave properties and microstructure of Y1Ba2Cu3O7 thin films. Czechoslovak Journal of Physics, 46 (2 Supplement). pp. 1109-1110.
Tuladhar, Rabin, Mutsuyoshi, Hiroshi, and Maki, Takeshi (2006) Full-scale test on concrete piles under seismic loading. In: Proceedings of the First European Conference on Earthquake Engineering and Seismology, pp. 1-9. From: First European Conference on Earthquake Engineering and Seismology, 3 - 8 September 2006, Geneva, Switzerland.
Volker, Raymond Edward (1969) Numerical solutions to problems of nonlinear flow through porous materials. PhD thesis, University College of Townsville (now James Cook University).
Wang, Meiling, Ketheesan, Natkunam, and Peng, Zhongxiao (2014) Investigations of wear particles and selected cytokines in human osteoarthritic knee joints. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (11). pp. 1176-1182.
Watson, Gregory S., Myhra, Sverre, and Watson, Jolanta A. (2011) Parallel and serial generated patterned DLC surfaces for creating three-dimensional polymeric stamp structures. Surface Science, 605 (11-12). pp. 989-993.
Watson, Gregory, Watson, Jolanta, Hu, Simon, Brown, Christopher L., Cribb, Bronwen W., and Myhra, Sverre (2010) Micro and nanostructures found on insect wings – designs for minimising adhesion and friction. International Journal of Nanomanufacturing, 5 (1/2). pp. 112-128.
Watson, G.S., Myhra, S., and Watson, J.A. (2007) Diamond-like-carbon (DLC) master creation for use in soft lithography using the Atomic Force Microscope (AFM). Journal of Physics: conference series, 61. pp. 1246-1250.
Zhu, Liqun, Feng, Liu, and He, Yinghe (2005) Composite nickel coatings containing lubricating oil microcapsules and their tribological properties. Plating & Surface Finishing, 92 (6). pp. 49-53.