Items where Subject is "09 ENGINEERING > 0906 Electrical and Electronic Engineering > 090604 Microelectronics and Integrated Circuits"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 37.

Article

Sayedsalehi, Samira, Rahimi Azghadi, Mostafa, Angizi, Shaahin, and Navi, Keivan (2015) Restoring and non-restoring array divider designs in quantum-dot cellular automata. Information Sciences, 311. pp. 86-101.

Rahimiazghadi, Mostafa, Moradi, Saber, Fasnacht, Daniel B., Ozdas, Mehmet Sirin, and Indiveri, Giacomo (2015) Programmable spike-timing-dependent plasticity learning circuits in neuromorphic VLSI architectures. ACM Journal on Emerging Technologies in Computing Systems, 12 (2). pp. 1-17.

Hashemi, Sara, Rahimi Azghadi, Mostafa, Zakerolhosseini, Ali, and Navi, Keivan (2015) A novel FPGA-programmable switch matrix interconnection element in quantum-dot cellular automata. International Journal of Electronics, 102 (4). pp. 703-724.

Rahimi, Mostafa, Giacomo, Indiveri, and Abbott, Derek (2014) Neuromorphic engineering: neuromimetic computation for understanding the brain. IEEE Life Sciences, June 2014.

Rahimi Azghadi, Mostafa, Iannella, Nicolangelo, Al-Sarawi, Said F., Indiveri, Giacomo, and Abbott, Derek (2014) Spike-based synaptic plasticity in silicon: design, implementation, application, and challenges. Proceedings of the IEEE, 102 (5). pp. 717-737.

Rahimi Azghadi, Mostafa, Iannella, Nicolangelo, Al-Sarawi, Said, and Abbott, Derek (2014) Tunable low energy, compact and high performance neuromorphic circuit for spike-based synaptic plasticity. PLoS ONE, 9 (2). e88326. pp. 1-14.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Abbott, Derek, and Iannella, Nicolangelo (2013) A neuromorphic VLSI design for spike timing and rate based synaptic plasticity. Neural Networks, 45. pp. 70-82.

Navi, Keivan, Sayedsalehi, Samira, Farazkish, Razieh, and Rahimi Azghadi, Mostafa (2010) Five-input majority gate, a new device for quantum-dot cellular automata. Journal of Computational and Theoretical Nanoscience, 7 (8). pp. 1546-1553.

Navi, Keivan, Farazkish, Razieh, Sayedsalehi, Samira, and Rahimi Azghadi, Mostafa (2010) A new quantum-dot cellular automata full-adder. Microelectronics Journal, 41 (12). pp. 820-826.

Navi, K., Foroutan, V., Rahimi Azghadi, M., Maeen, M., Ebrahimpour, M., Kaveh, M., and Kavehei, O. (2009) A novel low-power full-adder cell with new technique in designing logical gates based on static CMOS inverter. Microelectronics Journal, 40 (10). pp. 1441-1448.

Farazkish, Razieh, Rahimi Azghadi, Mostafa, Navi, Keivan, and Haghparast, Majid (2008) New method for decreasing the number of quantum dot cells in QCA circuits. World Applied Sciences Journal, 4 (6). pp. 793-802.

Zahedi, A., and Lade, S.J. (2004) A revised ideal model for AlGaAs/GaAs quantum well solar cells. Microelectronic Journal, 35 (5). pp. 401-410.

Rault, Francis K., and Zahedi, Ahmad (2003) Computational analysis of the refractive index of multiple quantum wells for QWSC applications. Microelectronics Journal, 34 (2). pp. 149-158.

Mazierska, Janina E., and Allen, Gregory H. (1998) Analysis of high frequency properties of multilayer structures for multichip modules. Applied Superconductivity, 4 (12). pp. 635-643.

Ceremuga, Janina (1995) Review of recent developments in microwave research in Australia. IEICE Transactions on Electronics, E78-C (8). pp. 902-906.

Ceremuga, Janina E., and Allen, Gregory H. (1994) Simulation of surface resistance of high temperature YBa2Cu3O7 multilayers for multichip modules. Physica C: Superconductivity, 235-240 (Part 5). pp. 3367-3368.

Ceremuga, Janina, and Ziółkowski, Marek (1982) Diody ładunkowe p-n-n+. Elektronika, 23 (6). pp. 5-10.

Ceremuga, Janina (1981) A dynamic model of the p-n-n+ step recovery diodes for the numerical analysis of pulse circuits. Solid-State Electronics, 24 (6). pp. 501-510.

Ceremuga, Janina (1975) Analiza procesów fizycznych w diodzie p-n-n+. Elektronika, 16 (11). pp. 443-449.

Conference Item

Lammie, Corey, and Rahimiazghadi, Mostafa (2017) Digital, analog, and memristive implementation of Spike-based Synaptic Plasticity. In: Abstracts from the Systems & Computational Neuroscience Down Under Meeting. p. 46. From: SCiNDU: Systems & Computational Neuroscience Down Under, 13-15 December 2017, Brisbane, QLD, Australia.

Rahimi Azghadi, Mostafa, Moradi, Saber, and Indiveri, Giacomo (2013) Programmable neuromorphic circuits for spike-based neural dynamics. In: Proceedings of the 11th International New Circuits and Systems Conference. pp. 1-4. From: NEWCAS 2013: 11th International New Circuits and Systems Conference, 16-19 June 2013, Paris, France.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2013) A new compact analog vlsi model for spike timing dependent plasticity. In: Proceedings of the 21st International Conference on Very Large Scale Integration (VLSI-SoC). pp. 7-12. From: 2013 IFIP/IEEE: 21st International Conference on Very Large Scale Integration (VLSI-SoC), 7-9 October 2013, Istanbul, Turkey.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2012) Design and implementation of BCM rule based on spike-timing dependent plasticity. In: Proceedings of the 2012 International Joint Conference on Neural Networks. pp. 1-7. From: 2012 International Joint Conference on Neural Networks (IJCNN), 10-15 June 2012, Brisbane, QLD, Australia.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2012) Efficient design of triplet based spike-timing dependent plasticity. In: Proceedings of the 2012 International Joint Conference on Neural Networks. pp. 1-7. From: 2012 International Joint Conference on Neural Networks (IJCNN), 10-15 June 2012, Brisbane, QLD, Australia.

Rahimi Azghadi, Mostafa, Al-Sarawi, Said, Iannella, Nicolangelo, and Abbott, Derek (2011) Emergent BCM via neuromorphic VLSI synapses with STDP. In: Australian Workshop on Computational Neuroscience. p. 31. From: 5th Australian Workshop on Computational Neuroscience, 13-14 December 2011, University of Western Sydney, Campbelltown, NSW.

Rahimiazghadi, Mostafa, Kavehei, Omid, Al-Sarawi, Said, Iannella, Nicoangelo, and Abbott, Derek (2011) Novel VLSI implementation for triplet-based spike-timing dependent plasticity. In: Proceedings of the 7th International Conference on Intelligent Sensors, Sensor Networks and Information Processing. pp. 158-162. From: ISSNIP 2011: 7th International Conference on Intelligent Sensors, Sensor Networks and Information Processing, 6-9 December 2011, Adelaide, SA, Australia.

Kavehei, Omid, Rahimi Azghadi, Mostafa, Navi, Keivan, and Mirbaha, Amir-Pasha (2008) Design of robust and high-performance 1-bit CMOS Full Adder for nanometer design. In: Proceedings of the IEEE Computer Society Annual Symposium on VLSI. pp. 10-15. From: ISVLSI 08: IEEE Computer Society Annual Symposium on VLSI, 7-8 April 2008, Montpelier, France.

Kazemi-Fard, Nazim, Ebrahimpour, Maryam, Rahimi, Mostafa, Tehrani, Mohammad, and Navi, Keivan (2008) Performance evaluation of in-circuit testing on QCA based circuits. In: Proceedings of the IEEE East-West Design & Test Symposium. pp. 375-378. From: EWDTS 08: IEEE East-West Design & Test Symposium, 9-12 October 2008, Lviv, Ukraine.

Hashemi, Sara, Rahimi Azghadi, Mostafa, and Zakerolhosseini, Ali (2008) A novel QCA multiplexer design. In: Proceedings of the International Symposium on Telecommunications. pp. 692-696. From: IST 2008: International Symposium on Telecommunications, 27-28 August 2008, Tehran, Iran.

Bonyadi, M.R., Azghadi, S.M.R., Rad, N.M., Navi, K., and Afjei, E. (2007) Logic optimization for majority gate-based nanoelectronic circuits based on genetic algorithm. In: Proceedings of the 2007 International Conference on Electrical Engineering. pp. 1-5. From: IEEE 07: International Conference on Electrical Engineering, 11-12 April 2007, Lahore, Pakistan.

Leong, Kenneth, and Mazierska, Janina (1998) Accounting for lossy coupling in measurements of Q-factors of transmission mode dielectric resonators. In: Proceedings of the 1998 Asia-Pacific Microwave Conference, APMC 98. pp. 209-212. From: APMC 1998: Beyond the Wireless Multimedia Society, 8-11 December 1998, Yokohama, Japan.

Ceremuga, Janina, Leong, Kenneth, and Grabovickic, Robert (1996) Characterisation of high temperature superconducting films using a sapphire resonator and fitting procedures for calculations of the Q-Factor. In: Proceedings of the 11th International Microwave Conference MIKON 96. From: 11th International Microwave Conference MICON 96, 27-30 May 1996, Warsaw, Poland.

Krupka, J., Geyer, R.G., Baker-Jarvis, J., and Ceremuga, J. (1996) Measurements of the complex permittivity of microwave circuit board substrates using split dielectric resonator and reentrant cavity techniques. In: Proceedings of the Seventh International Conference on Dielectric Materials, Measurements and Applications. pp. 21-24. From: Seventh International Conference on Dielectric Materials, Measurements and Applications, 23-26 September 1996, Bath, UK.

Book

Kikkert, Cornelius J. (2013) RF Electronics: design and simulation. James Cook University, Townsville, QLD, Australia.

Thesis

Grabau, Peter John (2016) The simulation of vibrations experienced by patients during helicopter winching and retrieval. PhD thesis, James Cook University.

Rahimi Azghadi, S. Mostafa (2014) Neuromorphic VLSI designs for spike timing and rate-based synaptic plasticity with application in pattern classification. PhD thesis, The University of Adelaide.

Leong, Kenneth Tak Ming (2000) Precise measurements of surface resistance of high temperature superconducting thin films using a novel method of Q-factor computations for sapphire dielectric resonators in the transmission mode. PhD thesis, James Cook University.

This list was generated on Thu Nov 21 22:40:13 2024 AEST.