Article

Stewart, Mark G., Ginger, John D., Henderson, David J., and Ryan, Paraic C. (2018) Fragility and climate impact assessment of contemporary housing roof sheeting failure due to extreme wind. Engineering Structures, 171. pp. 464-475.

Malekzadeh, M., and Sivakugan, N. (2017) Double drain electrokinetic stabilization of dredged mud using stainless steel electrodes and application of surcharge. KSCE Journal of Civil Engineering, 21 (7). pp. 2615-2621.

Tuladhar, Rabin, and Lancini, Benjamin J. (2014) Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers. Structural Engineering and Mechanics, 49 (4). pp. 449-461.

Henderson, David J., Ginger, John D., Morrison, Murray J., and Kopp, Gregory A. (2009) Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing. Wind & Structures, 12 (4). pp. 381-398.

Leong, Y.K. , Sganzerla, M., Berndt, C.C. , and Campbell, G.R. (2008) Metal ions solubility in plant phosphoric acid: degree of ammonia neutralization and temperature effects. Industrial & Engineering Chemistry Research, 47 (5). pp. 1380-1385.

Holmes, D.W., and Loughran, J.G. (2007) A theory for the isolation of the complex deformation characteristics of nonlinear viscoelastic materials. ANZIAM Journal, 48. pp. 645-660.

Ichim, I., Li, Q., Loughran, J., Swain, M.V., and Kieser, J. (2007) Restoration of non-carious cervical lesions: part I. modelling of restorative fracture. Dental Materials, 23 (12). pp. 1553-1561.

Racek, O., and Berndt, C.C. (2007) Mechanical property variations within thermal barrier coatings. Surface and Coatings Technology, 202 (2). pp. 362-369.

Ibrahim, A., Lima, R.S., Berndt, C.C., and Marple, B.R. (2007) Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings. Surface and Coatings Technology, 201 (16-17). pp. 7589-7596.

Ibrahim, A., and Berndt, C.C. (2007) Fatigue and deformation of HVOF sprayed WC-Co coatings and hard chrome plating. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 456 (1-2). pp. 114-119.

Adam, C.J., and Loughran, J.G. (2007) Finite element prediction of the performance of sugarcane rolling mills. International Sugar Journal, 109 (1301). pp. 272-284.

Lins, Vanessa F.C., Branco, José R.T., Diniz, Flávio R.C., Brogan, J.C., and Berndt, Christopher C. (2007) Erosion behavior of thermal sprayed, recycled polymer and ethylene–methacrylic acid composite coatings. Wear, 262 (3-4). pp. 274-281.

Liu, Yi, Jin, Feng, and Li, Qing (2006) A strength-based multiple cutout optimization in composite plates using fixed grid finite element method. Composite Structures, 73 (4). pp. 403-412.

Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.

Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.

Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.

Duan, Mei (2004) Splitting behaviour analysis of steel cladding systems. Key Engineering Materials, 274-276. pp. 151-156.

Wheatley, G., Niefanger, R., Estrin, Y., and Hu, X.Z. (1998) Fatigue crack growth in 316L stainless steel. Key Engineering Materials, 145-149. pp. 631-636.

Book Chapter

Hodzic, Alma (2005) Bacterial polyester-based biocomposites: a review. In: Mohanty, Amar K., Misra, Manjusri, and Drzal, Lawrence T., (eds.) Natural Fibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, FL, USA, pp. 597-616.

Hodzic, Alma (2004) Re-use, recycling and degradation of composites. In: Baillie, Caroline, (ed.) Green Composites: polymer composites and the environment. Woodhead Publishing, Cambridge, UK, pp. 252-271.

Conference Item

Henderson, David, Ginger, John, Morrison, Murray, and Kopp, Gregory A. (2009) Application of simulated cyclonic wind loads on roof cladding. In: Proceedings of the 11th Americas Conference on Wind Engineering. From: 11th Americas Conference on Wind Engineering, 22-26 June 2009, San Juan, Puerto Rico.

Pandey, G.R., Mutsuyoshi, H., and Tuladhar, R. (2008) Seismic retrofitting of reinforced concrete bridge frames using external bonded FRP sheets. In: Proceedings of the 14th World Conference on Earthquake Engineering (11) 11-0092. pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.

Loughran, J.L., and Britton, P.F. (2007) Modelling of coal flow through industrial scale transfer chutes. In: Proceedings of the Discrete Element Methods Conference 2007 (21) From: Discrete Element Methods (DEM) 2007, 27-29 August 2007, Brisbane, QLD, Australia.

Feng, Y., Han, K., Owen, D.R.J., and Loughran, J. (2007) Upscaling of discrete element models for particle systems. In: Proceedings of Discrete Element Methods 2007. pp. 1-9. From: Discrete Element Methods (DEM) 2007, 27-29 AUG 2007, Brisbane, QLD, Australia.

Montavon, G., Berndt, C., Trifa, F.I., and Guessasma, S. (2005) Correlating the spray pattern to the coating architecture: exploring the dominant mechanisms and process parameters. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists. pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.

Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.

Michlik, P., Berndt, C., and Racek, O. (2005) XFEM modeling of effective thermal properties and fracture of thermal barrier coatings. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Loughran, J.G., and Anderson, S. (2004) Large strain deformation and fracture of quai-brittle materials with application to process comminution equipment. In: Proceedings of the 6th World Congress on Computational Mechanics. pp. 1-9. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Karunasena, W.M. (2004) Numerical modelling of obliquely incident guided wave scattering by a crack in a laminated composite plate. In: Proceedings of Structural Integrity and Fracture Conference 2004. pp. 181-187. From: Structural Integrity and Fracture, 26-29 September 2004, Brisbane, QLD, Australia.

Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Book

Barnes, Mark C. (2012) Examination of Gold Thin Film Growth Using the Charged Cluster Model. LAMBERT Academic Publishing (LAP), Saarbrucken, Germany.

Thesis

Malekzadeh, Mona (2016) Electrokinetic dewatering and consolidation of dredged marine sediments. PhD thesis, James Cook University.

Lovisa, Amy (2015) Characterising the fatigue response of corrugated roof cladding. PhD thesis, James Cook University.