Items where Subject is "09 ENGINEERING > 0915 Interdisciplinary Engineering > 091599 Interdisciplinary Engineering not elsewhere classified"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | L | M | S | W | Y
Number of items at this level: 33.

A

Ajayi, O.O., and Sheehan, M.E. (2015) Pseudophysical compartment modeling of an industrial flighted rotary dryer with flighted and unflighted sections: energy. Industrial & Engineering Chemistry Research, 54 (49). pp. 12331-12341.

Afshar, Sepideh, Sheehan, Madoc, and Fazlollahi, Amir (2015) Using CFD to derive reduced order models for heat transfer in particle curtains. Progress in Computational Fluid Dynamics, 15 (2). pp. 71-80.

Ajayi, O.O., and Sheehan, M.E. (2014) Pseudophysical compartment modeling of an industrial rotary dryer with flighted and unflighted sections: solids transport. Industrial & Engineering Chemistry Research, 53. pp. 15980-15989.

Afshar, Sepideh, and Sheehan, Madoc (2012) Using CFD to simulate heat transfer in particle curtains. In: Ninth International Conference on CFD in the Minerals and Process Industries. pp. 1-7. From: Ninth International Conference on CFD in the Minerals and Process Industries, 10-12 December 2012, Melbourne, Australia.

Ajayi, O.O., and Sheehan, M.E. (2012) Application of image analysis to determine design loading in flighted rotary dryers. Powder Technology, 223. pp. 123-140.

B

Bodisco, Timothy, Reeves, Robert, Situ, Rong, and Brown, Richard (2012) Bayesian models for the determination of resonant frequencies in a DI diesel engine. Mechanical Systems and Signal Processing, 26. pp. 305-314.

Brodie, Graham, Harris, Gerard, Jacob, Mohan V., Sheehan, Madoc, and Yin, Ling (2011) Microwave modification of sugar cane to enhance juice extraction during milling. Journal of Microwave Power and Electromagnetic Energy, 45 (4). pp. 178-187.

Brodie, G., Jacob, M.V., Sheehan, M., Yin, L., Cushion, M., and Harris, G. (2011) Microwave modifications of sugar cane to enhance juice extraction during milling. International Sugar Journal, 113 (1354). pp. 714-718.

Bednarz, Tomasz, Fornalik, Elzbieta, Tagawa, Toshio, Ozoe, Hiroyuki, and Szmyd, Janusz S. (2006) Convection of paramagnetic fluid in a cube heated and cooled from side walls and placed below a superconducting magnet: comparison between experiment and numerical computations. Thermal Science and Engineering, 14 (4). pp. 107-114.

L

Lee, Andrew, Sheehan, Madoc, and Schneider, Phil (2014) Multi-scale process models to enable the embedding of CFD derived functions: curtain drag in flighted rotary dryers. In: Proceedings of the 10th International Conference on Computational Fluid Dynamics in the Oil and Gas, Metallurgical and Process Industries. pp. 1-9. From: CFD 2014: 10th International Conference on Computational Fluid Dynamics in the Oil and Gas, Metallurgical and Process Industries, 17-19 June 2014, Trondheim, Norway.

Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.

Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists. pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.

Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.

Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.

Loughran, J.G., Leonardi, C.R., and Anderson, S. (2004) DEM of bulk flow through complex transitions. In: Proceedings of the 8th International Conference on Bulk Materials Storge, Handling and Transportation. pp. 1-5. From: 8th International Conference on Bulk Materials Storage, Handling and Transportation, 5-8 July 2004, University of Wollongong.

Loughran, J.G., and Anderson, S. (2004) Large strain deformation and fracture of quai-brittle materials with application to process comminution equipment. In: Proceedings of the 6th World Congress on Computational Mechanics. pp. 1-9. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

M

May, J., Sheehan, M., Ajayi, O., and Hickey, T. (2014) Bagasse dryer design using multi-scale compartment models. In: Proceedings of the Australian Society of Sugar Cane Technologists (36) pp. 506-515. From: ASSCT 2014: 36th Annual Conference of the Australian Society of Sugar Cane Technologists, 28 April - 1 May 2014, Broadbeach, QLD, Australia.

S

Sealey, Leanna A., Hughes, Brandon W., Pestaner, Joseph P., Steinemann, Anne, Pace, Donald Gene, and Bagasra, Omar (2015) Environmental factors may contribute to autism development and male bias: effects of fragrances on developing neurons. Environmental Research, 142. pp. 731-738.

Sebastian, B.R., Kenny, O.P., Situ, R., and Santarossa, L.G. (2015) Tractive effort modelling and design of hybrid powertrain for a diesel-hydraulic cane haul locomotive. In: Proceedings of the 37th Annual Conference of the Australian Society of Sugar Cane Technologists (37) M28. pp. 395-405. From: ASSCT 2015: 37th Annual Conference of the Australian Society of Sugar Cane Technologists, 28-30 April 2015, Bundaberg, QLD, Australia.

Situ, R., Grech, S., and Santarossa, L.G. (2014) Energy model for diesel hydraulic cane haul locomotives. In: Proceedings of the Australian Society of Sugar Cane Technologists (36) M28. pp. 344-358. From: ASSCT 2014: 36th Annual Conference of the Australian Society of Sugar Cane Technologists, 28 April - 1 May 2014, Broadbeach, QLD, Australia.

Surawski, N.C., Miljevic, B., Bodisco, T.A., Situ, R., Brown, R.J., and Ristovski, Z.D. (2014) Performance and gaseous and particle emissions from a liquefied petroleum gas (LPG) fumigated compression ignition engine. Fuel , 133. pp. 17-25.

Sheehan, Madoc (2014) Designing sustainability curricula: a case following chemical engineering curriculum redesign. In: Thomas, Ken D., and Muga, Helen E., (eds.) Handbook of Research on Pedagogical Innovations for Sustainable Development. Practice, Progress and Proficiency in Sustainability . IGI Global, Hershey, PA, USA, pp. 474-493.

Situ, Rong, and Brown, Richard J. (2013) Mixing and dispersion of pollutants emitted from an outboard motor. Marine Pollution Bulletin, 69 (1-2). pp. 19-27.

Sheehan, Madoc, Desha, Cheryl, Schneider, Phil, and Turner, Phil (2012) Embedding sustainability into chemical engineering education: content development and competency mapping. In: Chemeca 2012. pp. 927-936. From: Quality of Life Through Chemical Engineering, 23-26 September 2012, The Museum of New Zeland, Te Papa Tongarewa, Wellington, New Zealand.

Surawski, Nicholas C., Ristovski, Zoran, Brown, Richard J., and Situ, Rong (2012) Gaseous and particle emissions from an ethanol fumigated compression ignition engine. Energy Conversion and Management, 54 (1). pp. 145-151.

Sheehan, Madoc, Schneider, Phil, and Desha, Cheryl (2012) Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia. Chemistry Education Research and Practice, 13 (2). pp. 112-119.

Sheehan, M.E., and Donaldson, M. (2011) Validation and optimization of an equilibrium model of a hot-lime-softening treatment system. Journal of Environmental Engineering, 137 (3). pp. 205-212.

Surawski, Nicholas C., Miljevic, Branka, Roberts, Boyd A., Modini, Robin L., Situ, Rong, Brown, Richard J., Bottle, Steven E., and Ristovski, Zoran D. (2010) Particle emissions, volatility, and toxicity from an ethanol fumigated compression ignition engine. Environmental Science and Technology, 44 (1). pp. 229-235.

W

Williams, John R., Holmes, David, and Tilke, Peter (2011) Parallel computation particle methods for multi-phase fluid flow with application oil reservoir characterization. In: Oñate, Eugenio, and Owen, Roger, (eds.) Particle-Based Methods: fundamentals and applications. Computational Methods in Applied Sciences, 25 . Springer, Dordrecht, The Netherlands, pp. 113-134.

Y

Yin, L., Singh, P., Brodie, G., Sheehan, M., and Jacob, M.V. (2013) Experimental and simulation approaches: effect of microwave energy on mechanical strength in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 10 (2). pp. 120-128.

Yin, Ling, Singh, Parmeet, Brodie, Graham, Sheehan, Madoc, and Jacob, Mohan V. (2012) Influence of microwave energy on mechanical strength in sugarcane. In: Proceedings of the 7th Australasian Congress on Applied Mechanics. pp. 754-758. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

This list was generated on Thu Mar 28 22:42:14 2024 AEST.