Article

Felfel, Reda M., Hossain, Kazi M. Zakir, Parsons, Andrew J., Rudd, Chris D., and Ahmed, Ifty (2015) Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites. Journal of Materials Science, 50 (11). pp. 3942-3955.

Liu, Xiaoling, Grant, David M., Palmer, Graham, Parsons, Andrew J., Rudd, Chris D., and Ahmed, Ifty (2015) Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 103 (7). pp. 1424-1432.

Sharmin, Nusrat, Parsons, Andrew J., Rudd, Chris D., and Ahmed, Ifty (2014) Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P₂O₅. Journal of Biomaterials Applications, 29 (5). pp. 639-653.

Hossain, Kazi M. Zakir, Hasan, Muhammad S., Boyd, Daniel, Rudd, Chris D., Ahmed, Ifty, and Thielemans, Wim (2014) Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic acid fibers. Biomacromolecules, 15 (4). pp. 1498-1506.

Hossain, Kazi M. Zakir, Parsons, Andrew J., Rudd, Chris D., Ahmed, Ifty, and Thielemans, Wim (2014) Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres. European Polymer Journal, 53. pp. 270-281.

Liu, Xiaoling, Hasan, Muhammad S., Grant, David M., Harper, Lee T., Parsons, Andrew J., Palmer, Graham, Rudd, Chris D., and Ahmed, Ifty (2014) Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites. Journal of Biomaterials Applications, 29 (5). pp. 675-687.

Hossain, Kazi M. Zakir, Felfel, Reda M., Rudd, Chris D., Thielemans, Wim, and Ahmed, Ifty (2014) The effect of cellulose nanowhiskers on the flexural properties of self-reinforced polylactic acid composites. Reactive and Functional Polymers, 85. pp. 193-200.

Krupka, J., Wosik, J., Jastrzebski, C., Ciuk, T., Mazierska, J., and Zdrojek, M. (2013) Complex conductivity of YBCO films in normal and superconducting states probed by microwave measurements. IEEE Transactions on Applied Superconductivity, 23 (2). 1501011. pp. 1-11.

Felfel, R.M, Ahmed, I., Parsons, A.J, and Rudd, C.D. (2013) Bioresorbable composite screws manufactured via forging process: pull-out, shear, flexural and degradation characteristics. Journal of the Mechanical Behavior of Biomedical Materials, 18. pp. 108-122.

Felfel, R.M., Ahmed, I., Parsons, A.J., and Rudd, C.D. (2013) Bioresorbable screws reinforced with phosphate glass fibre: manufacturing and mechanical property characterisation. Journal of the Mechanical Behavior of Biomedical Materials, 17. pp. 76-88.

Felfel, R.M., Ahmed, I., Parsons, A.J., Palmer, G., Sottile, V., and Rudd, C.D. (2013) Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods. Materials Science and Engineering C, 33 (4). pp. 1914-1924.

Liu, Xiaoling, Grant, David M., Parsons, Andrew J., Harper, Lee T., Rudd, Chris D., and Ahmed, Ifty (2013) Magnesium coated bioresorbable phosphate glass fibres: investigation of the interface between fibre and polyester matrices. BioMed Research International, 2013. 735981.

Kannan, M. Bobby, He, Yinghe, and Sandham, Andrew (2010) Calcium phosphate deposition on magnesium alloy for bioimplant applications. Materials Science Forum, 654-656. pp. 2196-2199.

Xu, Jia, Zhang, Jinhui, Gao, Weiquan, Liang, Hongwei, Wang, Hongyan, and Li, Junfeng (2009) Preparation of chitosan/PLA blend micro/nanofibers by electrospinning. Materials Letters, 63 (8). pp. 658-660.

Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J., and St John, David H. (2007) Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. Journal of Materials Science, 42 (23). pp. 9756-9764.

Michlik, P., and Berndt, C. (2006) Image-based extended finite element modeling of thermal barrier coatings. Surface and Coatings Technology, 201 (6). pp. 2369-2380.

Yao, Xiangdong, Wu, Chengzhang, Du, Aijun, Lu, Gao Qing, Cheng, Huiming, Smith, Sean C., Zou, Jin, and He, Yinghe (2006) Mg-based nanocomposites with high capacity and fast kinetics for hydrogen storage. Journal of Physical Chemistry Part B, 110 (24). pp. 11697-11703.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Ab initio studies of hydrogen desorption from low index magnesium hydride surface. Surface Science, 600 (9). pp. 1854-1859.

Du, A.J., Smith, Sean C., Yao, X.D., He, Y., and Lu, G.Q. (2006) Atomic hydrogen diffusion in novel magnesium nanostructures: the impact of incorporated subsurface carbon atoms. Journal of Physics: conference series, 29. pp. 167-172.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) First-principle study of adsorption of hydrogen on Ti-doped Mg (0001) surface. Journal of Physical Chemistry Part B, 110 (43). pp. 21747-21750.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2005) The role of Ti as a catalyst for the dissociation of hydrogen on a Mg(0001) surface. Journal of Physical Chemistry Part B, 109 (38). pp. 18037-18041.

Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.

Myhra, S., and Watson, G. (2005) Tip-induced nano-writing/machining of Si and DLC surfaces – "anodic" versus thermal oxidation? Applied Physics A: Materials Science and Processing, 81 (3). pp. 487-493.

Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.

Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.

Zhu, Liqun, Zhang, Wei, Liu, Feng, and He, Yinghe (2004) Electrodeposition of composite copper/liquid-containing microcapsule coatings. Journal of Materials Science, 39 (2). pp. 495-499.

Adam, Clayton J., and Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurement for fibro-porous media - a finite element investigation. Journal of Porous Media, 7 (2). pp. 101-117.

Mazierska, Janina E., and Allen, Gregory H. (1998) Analysis of high frequency properties of multilayer structures for multichip modules. Applied Superconductivity, 4 (12). pp. 635-643.

Jacob, Mohan V., Mazierska, Janina, Kim, Jeha, Kang, Kwang-Yong, and Srivastava, G.P. (1998) Microwave and microstructural studies of silver-doped YBa2Cu3O7-δ thin films. Superconductor Science & Technology, 11 (11). pp. 1217-1221.

Gamchi, H.S., Taylor, K.N.R., Russell, G.J., and Ceremuga, J.E. (1994) Variable range hopping conductivity in Y123–Y211 composites close to the percolation limit. Physica B: Condensed Matter, 194-196 (Part 1). pp. 1157-1158.

Book Chapter

Hodzic, Alma (2005) Bacterial polyester-based biocomposites: a review. In: Mohanty, Amar K., Misra, Manjusri, and Drzal, Lawrence T., (eds.) Natural Fibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, FL, USA, pp. 597-616.

Hodzic, Alma (2004) Re-use, recycling and degradation of composites. In: Baillie, Caroline, (ed.) Green Composites: polymer composites and the environment. Woodhead Publishing, Cambridge, UK, pp. 252-271.

Conference Item

Yin, L., Authurs, D., Wright, S., and Santarossa, L. (2014) Fracture and wear in shredder hammer tungsten carbide tips in the sugar cane shredding process. In: Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCF/SIF-2014). pp. 57-61. From: APCF/SIF-2014: Asian-Pacific Conference on Fracture and Strength and International Conference on Structural Integrity and Failure, 9-12 December 2014, Sydney, NSW, Australia.

Ahmed, I., Han, N., Qureshi, A., Parsons, A., Scotchford, C., Scammell, B., and Rudd, C. (2013) Bioresorbable composite bone fracture repair plates: manufacture and characterisation. In: [Proceedings of the International Conference on Composite Science and Technology]. pp. 986-988. From: 9th International Conference on Composite Science and Technology, 24-26 April 2016, Sorrento, Italy.

Pandey, G.R., Mutsuyoshi, H., and Tuladhar, R. (2008) Seismic retrofitting of reinforced concrete bridge frames using external bonded FRP sheets. In: Proceedings of the 14th World Conference on Earthquake Engineering (11) 11-0092. pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.

Montavon, G., Berndt, C., Trifa, F.I., and Guessasma, S. (2005) Correlating the spray pattern to the coating architecture: exploring the dominant mechanisms and process parameters. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists. pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.

Racek, O., Berndt, C.C., Guru, D., and Heberlein, J. (2005) Microstructural observation of the sintering behavior of nanostructured yttria stabilized zirconia. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.

Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.

Karunasena, W., and Anderson, W.C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: Proceedings of 4th Australian Congress on Applied Mechanics. pp. 561-566. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics. pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.

Loughran, J.G., Leonardi, C.R., and Anderson, S. (2004) DEM of bulk flow through complex transitions. In: Proceedings of the 8th International Conference on Bulk Materials Storge, Handling and Transportation. pp. 1-5. From: 8th International Conference on Bulk Materials Storage, Handling and Transportation, 5-8 July 2004, University of Wollongong.

Loughran, J.G., and Anderson, S. (2004) Large strain deformation and fracture of quai-brittle materials with application to process comminution equipment. In: Proceedings of the 6th World Congress on Computational Mechanics. pp. 1-9. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.

Thesis

Rankine, Rudd McAuslan (2004) The geotechnical characterisation and stability analysis of BHP Billiton's Cannington Mine paste fill. PhD thesis, James Cook University.