Browse by ANZSRC Socio-Economic Objective codes

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 48.

Article

Wheatley, Greg (2018) Design of a 10T Flake Pile Roller Stand. Industrial Engineering & Management, 7 (4). 1000275.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A fault diagnosis approach for gears using multidimensional features and intelligent classifier. Noise and Vibration Worldwide, 41 (10). pp. 76-86.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A new method of nonlinear feature extraction for multi-fault diagnosis of rotor systems. Noise and Vibration Worldwide, 41 (10). pp. 29-37.

Li, Li, Peng, Zhongxiao, and Peng, Shuzhi (2009) Detrended fluctuation analysis for gear fault diagnosis. China Mechanical Engineering, 20 (19). pp. 2311-2314.

Peng, S.Z., and Sun, H.M. (2009) Accurate and efficient prediction of acoustical performance of noise barriers against transport noise pollution. International Journal of Vehicle Noise and Vibration, 5 (1-2). pp. 53-90.

Wheatley, Greg (2009) Measurement While Coring (MWC) - measurement of core acquisition in real time. APPEA Journal, 49 (1). pp. 25-30.

Yuan, C. Q., Peng, Z., Yan, X.P., and Zhou, X. C. (2008) Surface roughness evolutions in sliding wear process. Wear, 265 (3-4). pp. 341-348.

Ebersbach, Stephan, and Peng, Zhongxiao (2008) Expert system development for vibration analysis in machine condition monitoring. Expert Systems with Applications, 34 (1). pp. 291-299.

Yuan, C.Q., Yan, X.P., and Peng, Z. (2007) Prediction of surface features of wear components based on surface characteristics of wear debris. Wear, 263 (7-12). pp. 1513-1517.

Britton, P.F., Sheehan, M.E., and Schneider, P.A. (2006) A physical description of solids transport in flighted rotary dryers. Powder Technology, 165 (3). pp. 153-160.

Ebersbach, S., Peng, Z., and Kessissoglou, N.J. (2006) The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques. Wear, 260 (1-2). pp. 16-24.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2006) Flight unloading in rotary sugar dryers. International Sugar Journal, 108 (1286). pp. 83-89.

Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A model for solids transport in flighted rotary dryers based on physical considerations. Chemical Engineering Science, 60 (15). pp. 4171-4182.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear, 259 (1). pp. 512-518.

Yuan, Chengqing, Peng, Zhongxiao, and Yan, Xinping (2005) Surface characterization using wavelet theory and confocal laser scanning microscopy. Journal of Tribology, 127 (2). pp. 394-404.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribology International, 38 (2). pp. 129-143.

Peng, Z., Kessissoglou, N.J., and Cox, M. (2005) A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 258 (11-12). pp. 1651-1662.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2004) Effects of temperature on sliding wear process under contaminated lubricant test conditions. Wear, 257 (7-8). pp. 812-822.

Yuan, C.Q., Li, J., Yan, X.P., and Peng, Z. (2003) The use of the fractal description to characterize engineering surfaces and wear particles. Wear, 255 (1-6). pp. 315-326.

Peng, Z., and Kessissoglou, N. (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear, 255 (7-12). pp. 1221-1232.

Peng, Zhongxiao (2002) An integrated intelligence system for wear debris analysis. Wear, 252 (9-10). pp. 730-743.

Kessissoglou, N.J. (2001) An analytical and experimental investigation on active control of the flexural wave transmission in a simply supported ribbed plate. Journal of Sound and Vibration, 240 (1). pp. 73-85.

Kessissoglou, Nicole J. (2001) Active attenuation of the wave transmission through an L-plate junction. Journal of the Acoustical Society of America, 110 (1). pp. 267-277.

Wheatley, G., Hu, X.Z., and Estrin, Y. (1999) Effects of a single tensile overload on fatigue crack growth in a 316L steel. Fatigue and Fracture of Engineering Materials and Structures, 22. pp. 1041-1051.

Wheatley, G., Estrin, Y., Hu, X.Z., and Brechet, Y. (1998) Effect of low cycle fatigue on subsequent high cycle fatigue life of 316L stainless steel. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 254. pp. 315-316.

Conference Item

Li, Zhixiong, Yan, Xinping, Yuan, Chengqin, and Peng, Zhongxiao (2010) Gear faults diagnosis based on wavelet-AR model and PCA. In: Proceedings of SPIE (7820) 78203V. 78203V-1. From: International Conference on Image Processing and Pattern Recognition in Industrial Engineering, 7 - 8 August 2010, Xi'an, China.

Peng, Shuzhi, Cheng, Li, Huang, Lixi, Peng, Zhongxiao, and Li, Li (2009) Advanced acoustical wave propagator technique for acoustic-structure interaction in a duct structure with/without membrane. In: Proceedings of the 16th International Congress on Sound and Vibration. pp. 4324-4331. From: 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland.

Barnes, M,G., Loughran, J.G., Whiteing, C., and Lamb, B.W. (2009) Development and testing of a sugarcane harvester single drum chopper system. In: Proceedings of the 2009 Conference of the Australian Society of Sugar Cane Technologists. pp. 546-555. From: 2009 Conference of the Australian Society of Sugar Cane Technologists, 5 - 8 May, 2009, Ballina, NSW, Australia.

Li, Li, Peng, Zhongxiao, and Zhao, Meiyun (2009) In-situ monitoring of active crack in steel structure using acoustic emission technique. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation (1) pp. 229-232. From: 2009 International Conference on Measuring Technology and Mechatronics Automation, 11-12 April 2009, Hunan, China.

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007. pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Ebersbach, Stephan, Peng, Zhongxiao, and Kessissoglou, Nicole (2007) Smart condition monitoring by intergration of vibration, oil and wear particle analysis. In: Proceedings of the 14th International Congress on Sound and Vibration 2007. pp. 1-9. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ebersbach, Stephan, and Peng, Zhongxiao (2007) Wear oriented strategy for gearbox remaining lifetime estimation. In: Proceedings of the 14th International Congress on Sound and Vibration 2007. pp. 1-8. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Sheehan, M.E. (2006) A systems and resistance analysis of heat loss through an industrial flighted rotary ore dryer. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Ebersbach, Stephan, and Peng, Zhongxiao (2005) The development of a comprehensive machine condition monitoring program. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring. pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Peng, Z., and Brown, J. (2005) The development of a quantitative method for the assessment of abrasive and corrosive wear. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring. pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Lee, A., Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A comparison of compartment models for solids transport in flighted rotary dryers. In: Proceedings of the 33rd Australasian Chemical Engineering Conference. pp. 1-6. From: 33rd Australasian Chemical Engineering Conference, 25 - 28 September 2005, Sydney, NSW, Australia.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) An internet-based system for remote condition monitoring. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing. pp. 286-291. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The study of sliding and rolling wear using wear debris analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials. pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Peng, Z., Green, A., and Yuan, C. (2005) The study of wear in a spur gear using wear debris and vibration analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials. pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Peng, Z., and Kessissoglou, N. (2003) Integration of wear debris and vibration analysis for machine condition monitoring. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 23-30. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Thetford, A. (2003) The development of an expert system to monitor the condition of gearboxes using wear debris analysis techniques. In: Proceedings of International Conference on Intelligent Maintenance Systems. pp. 182-189. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Darwen, Paul J. (2002) Evolving a schedule with batching, precedence constraints, and sequence-dependent setup times: crossover needs building blocks. In: Lecture Notes in Computer Science (2358) pp. 525-535. From: IEA/AIE 2002: 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, 17-20 June 2002, Cairns, QLD, Australia.

Wheatley, G., and Ohta, Akihito (2002) On fatigue life improvement using low transformation temperature weld material. In: Proceedings of the International Conference of Structural Inegrity and Fracture. pp. 201-205. From: SIF 2002: Structural Integrity and Fracture, 25-28 September 2002, Perth, WA, Australia.

Peng, Z., and Kessissoglou, N.J. (2002) The correlation of wear debris analysis with vibrations analysis of a worm gear. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 255-261. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Z., and Tomovich, S.J. (2002) The study of wear particles generated from industrial machines. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002). pp. 423-428. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Wheatley, G., Bowman, D., Estrin, Y., Hu, X.Z., and Bréchet, Y. (1999) Interaction between low cycle fatigue and high cycle fatigue in common metallic materials. In: Proceedings of the Seventh International Fatigue Congress (2) pp. 1045-1050. From: Fatigue 99: Seventh International Fatigue Congress, 8-12 June 1999, Beijing, China.

Wheatley, G., Estrin, Y., Hu, X.Z., and Brechet, Y. (1998) Interaction between low cycle fatugue and high cycle fatigue in 316L stainless steel. In: Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials. pp. 567-572. From: 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, 7-11 September 1998, Garmisch-Partenkirchen, Germany.

Thesis

Wheatley, H. Gregory (2001) Influence of tensile overload on crack growth in 316L stainless-steel - including high strain & low stress interactions in 316l stainless steel, mild steel and aluminium alloy 6060-T5. PhD thesis, University of Western Australia.

This list was generated on Mon Apr 19 23:10:08 2021 AEST.