Article

Kannan, M. Bobby, Walter, R., and Yamamoto, A. (2016) Biocompatibility and in vitro degradation behavior of magnesium–calcium alloy coated with calcium phosphate using an unconventional electrolyte. ACS Biomaterials Science & Engineering, 2 (1). pp. 56-64.

Kazum, O., and Mathan, M. Bobby (2016) Optimising parameters for galvanostatic polyaniline coating on nanostructured bainitic steel. Surface Engineering, 32 (8). pp. 607-6014.

Walter, R., and Mathan, M. Bobby (2015) A mechanistic in vitro study of the microgalvanic degradation of secondary phase particles in magnesium alloys. Journal of Biomedical Materials Research Part A, 103 (3). pp. 990-1000.

Kannan, M. Bobby, Yamamoto, A., and Khakbaz, Hadis (2015) Influence of living cells (L929) on the biodegradation of magnesium–calcium alloy. Colloids and Surfaces B: Biointerfaces, 126. pp. 603-606.

Kesteven, Jazmin, Mathan, M. Bobby, Walter, Rhys, Khakbaz, Hadis, and Choe, Han-Choel (2015) Low elastic modulus Ti–Ta alloys for load-bearing permanent implants: enhancing the biodegradation resistance by electrochemical surface engineering. Materials Science and Engineering C, 46. pp. 226-231.

Koc, Erkan, Mathan, Bobby, Unal, Mehmet, and Candan, Ercan (2015) Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium–zinc binary alloys. Journal of Alloys and Compounds, 648 (5). pp. 291-296.

Walter, R., Kannan, M. Bobby, He, Y., and Sandham, A. (2014) Influence of the cathodic activity of magnesium alloys on the electrochemical deposition of calcium phosphate. Materials Letters, 130. pp. 184-187.

Kazum, O., Kannan, M. Bobby, Scharnagl, N., Blawert, C., and He, Y. (2013) Electrochemical corrosion behaviour of WE54 magnesium alloy. Materials Science Forum, 765. pp. 644-647.

M, Bobby Kannan (2013) An outlook on magnesium-based biodegradable implants. Journal of Material Science & Engineering, 2 (1). e108. pp. 1-2.

Kannan, M. Bobby, and Dietzel, W. (2012) Pitting-induced hydrogen embrittlement of magnesium–aluminium alloy. Materials and Design, 42. pp. 321-326.

Kannan, M. Bobby (2012) Enhancing the performance of calcium phosphate coating on a magnesium alloy for bioimplant applications. Materials Letters, 76. pp. 109-112.

Walter, R., and Kannan, M. Bobby (2011) In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Materials Letters, 65 (4). pp. 748-750.

Kannan, M. Bobby, Raman, R.K. Singh, Witte, F., Blawert, C., and Dietzel, W. (2011) Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 96B (2). pp. 303-309.

Kannan, M. Bobby, and Raman, R.K. Singh (2010) A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques. Journal of biomedical materials research, 93a (3). pp. 1050-1055.

Kannan, M. Bobby (2010) Influence of microstructure on the in-vitro degradation behaviour of magnesium alloys. Materials Letters, 64 (6). pp. 739-742.

Kannan, M. Bobby, and Raja, V.S. (2009) Environmentally-assisted cracking of engineering materials – an insight. Corrosion Reviews, 27 (Supplement). pp. 147-180.

Kannan, M. Bobby, and R.K. Singh, Raman (2009) Magnesium alloys as biodegradable implants. Materials Science Forum, 618-619. pp. 83-86.

Kannan, M. Bobby, and Raman, R.K. Singh (2008) Evaluating the stress corrosion cracking susceptibility of Mg–Al–Zn alloy in modified-simulated body fluid for orthopaedic implant application. Scripta Materialia, 59 (2). pp. 175-178.

Kannan, M.Bobby, Dietzel, W., Blawert, C., Atrens, A., and Lyon, P. (2008) Stress corrosion cracking of rare-earth containing magnesium alloys ZE41, QE22 and Elektron 21 (EV31A) compared with AZ80. Materials Science and Engineering A: structural materials: properties microstructure and processing, 480 (1-2). pp. 529-539.

Kannan, M. Bobby, and Raman, R.K. Singh (2008) In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid. Biomaterials, 29 (15). pp. 2306-2314.

Saxena, A., Raman, R.K. Singh, and Kannan, M. Bobby (2008) Laser assisted surface modification of AZ91 alloy: microstructural and electrochemical study. Transactions of the Indian Institute of Metals, 61 (2-3). pp. 121-124.

Leong, YeeKwong (2007) Surface forces arising from adsorbed hydrolysis products of metal ions in ZrO2 and silica dispersions: Cu(II), Ni(II), Co(II) and Al(III). Powder Technology, 179 (1-2). pp. 38-42.

Kannan, M. Bobby, Dietzel, W., Raman, R.K. Singh, and Lyon, P. (2007) Hydrogen-induced-cracking in magnesium alloy under cathodic polarization. Scripta Materialia, 57 (7). pp. 579-581.

Mandin, Philippe, Cense, J.M., Fabian, Cesimiro, Gbado, C., and Lincot, D. (2007) Electrodeposition process modeling using continuous and discrete scales. Computers & Chemical Engineering, 31 (8). pp. 980-992.

Mathan, M. Bobby, Dietzel, W, Zeng, R, Zettler, R, and Dos Santos, J.F (2007) A study on the SCC susceptibility of friction stir welded AZ31 Mg sheet. Materials Science and Engineering, 460 ( ). pp. 243-250.

Kannan, M. Bobby, Dietzel, W., Blawert, C., Riekehr, S., and Kocak, M. (2007) Stress corrosion cracking behavior of Nd:YAG laser butt welded AZ31 Mg sheet. Materials Science and Engineering A: structural materials: properties microstructure and processing, 444 (1-2). pp. 220-226.

Mathan, M. Bobby (2007) Laser treated magnesium-based alloy: A potential candidate for biodegradable implants. Hong Kong Institution of Engineers Transactions, 14 (4). pp. 1-4.

Yao, X. (2006) Effect of solute redistribution on the growth kinetics in solidification. International Journal of Modern Physics B, 20 (25-27). pp. 3938-3943.

Yao, X., and Wang, H. (2006) Modeling of semisolid structure formation in controlled nucleation method. International Journal of Modern Physics B, 20 (25-27). pp. 4123-4128.

Yao, X. (2006) On the solute coupling at the moving solid-liquid interface during equiaxed solidification. Applied Physics Letters, 89 (7). pp. 71903-71905.

Mandin, Philippe, Fabian, Cesimiro, and Lincot, Daniel (2006) Importance of the density gradient effects in modelling electrodeposition process at a rotating cylinder electrode. Electrochimica Acta, 51 (19). pp. 4067-4079.

Mandin, Ph., Fabian, C., and Lincot, D. (2006) Mean and unsteady hydrodynamic and mass transport properties at a rotating cylinder electrode: from laminar to transitional flow regime. Journal of Electroanalytical Chemistry, 586 (2). pp. 276-296.

Yao, X. (2006) Modeling and experimental study of the interface morphology and growth kinetics for fibrous growth of eutectic. Journal of Materials Research, 21 (12). pp. 3009-3016.

Mandin, Ph., Fabian, C., and Lincot, D. (2006) Numerical simulation of hydrodynamic and mass-transport properties at a laminar rotating cylinder electrode. Journal of the Electrochemical Society, 153 (3). pp. 40-50.

Sieber, I., Kannan, B., and Schmuki, P. (2005) Self-assembled porous tantalum oxide prepared in H2SO4/HF electrolytes. Electrochemical and Solid-State Letters, 8 (3). pp. 10-12.

Bobby-Kannan, M., Raja, V. S., Raman, R., and Mukhopadhyay, A. K. (2003) Influence of multistep aging on the stress corrosion cracking behavior of aluminum alloy 7010. Corrosion, 59 (10). pp. 881-889.

Liow, Jong-Leng, Juusela, Mikko, Gray, N.B., and Sutalo, I.D. (2003) Entrainment of a two-layer liquid through a taphole. Metallurgical and Materials Transactions B, 34 (6). pp. 821-832.

Book Chapter

Kannan, M. Bobby, and Saji, V.S. (2012) Nanoscience and biomaterial corrosion control. In: Saji, Viswanathan S., and Cook, Ronald, (eds.) Corrosion Protection and Control Using Nanomaterials. Elsevier, Cambridge, UK, pp. 375-392.

Atrens, A., Dietzel, W., Bala Srinivasan, P., Winzer, N., and Kannan, M. Bobby (2011) Stress corrosion (SCC) of magnesium alloys. In: Raja, V.S., and Shoji, T., (eds.) Stress Corrosion Cracking: theory and practice. Elsevier, Cambridge, UK, pp. 341-380.

Conference Item

Kannan, M. Bobby (2014) Biodegradation of secondary phase particles in magnesium alloys: a critical review. In: Proceedings of the 19th International Corrosion Congress. From: ICC 2014: 19th International Corrosion Congress, 2-6 November 2014, Jeju, Korea.

Kannan, M. Bobby, and He, Yinghe (2011) In-vitro degradation behavior of biodegradable polymer coated magnesium alloy. In: Proceedings of CHEMECA 2011. pp. 1-7. From: CHEMECA 2011: engineering a better world, 18-21 September 2011, Sydney, NSW, Australia.

Kannan, M. Bobby, and Raman, R.K. Singh (2008) Stress corrosion cracking behaviour of biodegradable magnesium-based alloy in simulated physiological condition. In: Proceedings of the Corrosion and Prevention Conference 2008. 098. pp. 1-4. From: Corrosion and Prevention 2008: the impact of corrosion on our lives, 16 - 19 November 2008 , Wellington, New Zealand.

Pennisi, S. N., Liow, J.-L., and Schneider, P. A. (2004) CFD model development for a final effect evaporator. In: Proceedings of the Australian Society of Sugar Cane Technologists 2004 - Twenty-sixth Conference Brisbane 2004 (26) From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Pennisi, Steven N., Liow, Jong-Leng, and Schneider, Philip A. (2003) CFD model development for sugar mill evaporators. In: Proceedings of the 3rd International Conference on CFD in the Minerals and Process Industries. pp. 105-110. From: 3rd International Conference on CFD in the Minerals and Process Industries, 10-12 December 2003, Melbourne, VIC, Australia.