A

Adams, Nico, King, Peter, and Kambouris, Peter (2015) ICT in Manufacturing: high performance company industry consultations outcomes. Report. CSIRO, Melbourne, VIC, Australia.

Adams, Nico, Lefort, Laurent, King, Peter, Prentice, Leon, Taylor, Kerry, and Kambouris, Peter (2014) Equipping Australian Manufacturing for the Information Age - iManufacturing, Is Australia Ready?: discussion paper. Report. CSIRO, Melbourne, VIC, Australia.

H

Hartl, Hugo, Li, Wenshao, Michl, Thomas Danny, Anangi, Raveendra, Speight, Robert, Vasilev, Krasimir, Ostrikov, Kostya Ken, and MacLeod, Jennifer (2022) Antimicrobial adhesive films by plasma-enabled polymerisation of m-cresol. Scientific Reports, 12. 7560.

K

Kumari, Deepa, Prajapati, Megha, and Ravi Kant, Chhaya (2024) Highly Efficient Non-Enzymatic Electrochemical Glucose Biosensor Based on Copper Metal Organic Framework Coated on Graphite Sheet. ECS Journal of Solid State Science and Technology, 13. 047007.

L

Levchenko, Igor, Mandhakini, Mohandas, Prasad, Karthika, Bazaka, Olha, Ivanova, Elena P., Jacob, Mohan V., Baranov, Oleg, Riccardi, Claudia, Roman, H. Eduardo, Xu, Shuyan, and Bazaka, Kateryna (2022) Functional Nanomaterials from Waste and Low-Value Natural Products: A Technological Approach Level. Advanced Materials Technologies, 7 (11). 2101471.

Liu, Ziqian, Ramakrishna, Seeram, Ahmed, Ifty, Rudd, Chris, and Liu, Xiaoling (2022) Rheological, Surface Tension and Conductivity Insights on the Electrospinnability of Poly(lactic-co-glycolic acid)-hyaluronic Acid Solutions and Their Correlations with the Nanofiber Morphological Characteristics. Polymers, 14 (20). 4411.

Liu, Zhao, Dong, Chenhao, Tong, Lu, Rudd, Chris, Liu, Xiaoling, and Yi, Xiaosu (2022) A pre-screening study of honeycomb sandwich structure filled with green materials for noise reduction. Composites Part A: Applied Science and Manufacturing, 163. 107226.

M

Majeed, Mobin, Situ, Rong, and Javanbakht, Zia (2025) Effects of solution ageing in compressive behaviour of SLM-In718 triply periodic minimal surfaces. Progress in Additive Manufacturing, 10. NA-NA.

Majeed, Mobin, Khan, Hamaid Mahmood, Wheatley, Greg, and Situ, Rong (2022) Influence of post-processing on additively manufactured lattice structures. Journal Of The Brazilian Society Of Mechanical Sciences And Engineering, 44. 389.

N

Nguyen, Hung, Onofrei, George, Wiengarten, Frank, Yang, Ying, McClelland, Robert, and Akbari, Mohammadreza (2023) The dual environmental customer and green reputation pressures on environmental management systems: the performance implications of manufacturing exports. Supply Chain Management: an International Journal, 28 (4). pp. 695-709.

R

Roman, H. Eduardo, Cesura, Federico, Maryam, Rabia, Levchenko, Igor, Alexander, Katia, and Riccardi, Claudia (2024) The fractal geometry of polymeric materials surfaces: surface area and fractal length scales. Soft Matter, 20. pp. 3082-3096.

Rahmani, Kaveh, Wheatley, Greg, Sadooghi, Ali, Jalal Hashemi, Seyed, and Babazadeh, Jafar (2021) The experimental analysis of creep and corrosion properties of polymeric tube reinforced by glass, carbon and Kevlar fibers. Materials Research Express, 8 (6). 065307.

S

Soltani, Saeede, Natividad-Marin, Leynard, and Schneider, Philip Andrew (2023) A modelling approach to prepare synthetic urine for struvite precipitation studies. Water Science & Technology, 87 (11). pp. 2622-2633.

T

Tripathi, Abhishek, Daolio, Andrea, Pizzi, Andrea, Guo, Zhifang, Turner, David R., Baggioli, Alberto, Famulari, Antonino, Deacon, Glen B., Resnati, Giuseppe, and Singh, Harkesh B. (2021) Chalcogen bonds in selenocysteine seleninic acid, a functional GPx constituent, and in other seleninic or sulfinic acid derivatives. Chemistry: an Asian journal, 16 (16). pp. 2351-2360.

W

Wheatley, Greg, and Sachini Sandeepa Chandrasiri, Rendage (2020) Mechanical testing of recycled HDPE extruded hollow section. Annual Journal of Technical University of Varna, 4 (2). pp. 112-121.

Y

Yang, Wei, Yang, Yuan, Xiang, Wei, Yuan, Lei, Yu, Kan, Alonso, Álvaro Hernández, Ureña, Jesús Ureña, and Pang, Zhibo (2024) Adaptive optimization federated learning enabled digital twins in industrial IoT. Journal of Industrial Information Integration, 41. 100645.

Yang, Bin, Wang, Fengxin, Wang, Jiandong, Wang, Chuanjuan, and Qiu, Xuefeng (2024) Numerical simulation and optimisation of the inlet structure of dentiform emitters in drip-irrigation systems. Biosystems Engineering, 246. pp. 183-190.

Z

Zafar, Muhammad Adeel, and Jacob, Mohan V. (2022) Synthesis of free-standing graphene in atmospheric pressure microwave plasma for the oil-water separation application. Applied Surface Science Advances, 11. 100312.