Items where Subject is "09 ENGINEERING > 0912 Materials Engineering > 091202 Composite and Hybrid Materials"
|Up a level|
Adam, Clayton J., and Loughran, Jeffrey G. (2004) Seepage induced consolidation in permeability measurement for fibro-porous media - a finite element investigation. Journal of Porous Media, 7 (2). pp. 101-117.
Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Ab initio studies of hydrogen desorption from low index magnesium hydride surface. Surface Science, 600 (9). pp. 1854-1859.
Du, A.J., Smith, Sean C., Yao, X.D., He, Y., and Lu, G.Q. (2006) Atomic hydrogen diffusion in novel magnesium nanostructures: the impact of incorporated subsurface carbon atoms. Journal of Physics: conference series, 29. pp. 167-172.
Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) First-principle study of adsorption of hydrogen on Ti-doped Mg (0001) surface. Journal of Physical Chemistry Part B, 110 (43). pp. 21747-21750.
Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2005) The role of Ti as a catalyst for the dissociation of hydrogen on a Mg(0001) surface. Journal of Physical Chemistry Part B, 109 (38). pp. 18037-18041.
Gamchi, H.S., Taylor, K.N.R., Russell, G.J., and Ceremuga, J.E. (1994) Variable range hopping conductivity in Y123–Y211 composites close to the percolation limit. Physica B: Condensed Matter, 194-196 (Part 1). pp. 1157-1158.
Hodzic, Alma (2005) Bacterial polyester-based biocomposites: a review. In: Mohanty, Amar K., Misra, Manjusri, and Drzal, Lawrence T., (eds.) Natural Fibers, Biopolymers and Biocomposites. CRC Press, Boca Raton, FL, USA, pp. 597-616.
Hodzic, Alma (2004) Re-use, recycling and degradation of composites. In: Baillie, Caroline, (ed.) Green Composites: polymer composites and the environment. Woodhead Publishing, Cambridge, UK, pp. 252-271.
Jacob, Mohan V., Mazierska, Janina, Kim, Jeha, Kang, Kwang-Yong, and Srivastava, G.P. (1998) Microwave and microstructural studies of silver-doped YBa2Cu3O7-δ thin films. Superconductor Science & Technology, 11 (11). pp. 1217-1221.
Krupka, J., Wosik, J., Jastrzebski, C., Ciuk, T., Mazierska, J., and Zdrojek, M. (2013) Complex conductivity of YBCO films in normal and superconducting states probed by microwave measurements. IEEE Transactions on Applied Superconductivity, 23 (2). pp. 1-11.
Kannan, M. Bobby, He, Yinghe, and Sandham, Andrew (2010) Calcium phosphate deposition on magnesium alloy for bioimplant applications. Materials Science Forum, 654-656. pp. 2196-2199.
Karunasena, W., and Anderson, W.C. (2005) Strength and ductility prediction of concrete beams reinforced with internal steel and external composite materials. In: Proceedings of 4th Australian Congress on Applied Mechanics, pp. 561-566. From: 4th Australian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.
Li, Wei, Li, Qing, Steven, Grant P., and Xie, Y.M. (2005) An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194 (30-33). pp. 3394-3415.
Loughran, J.G., Anderson, S.I., Camuglia, J., and Trapp, N. (2005) Enhancing the life of shredder hammer tungsten carbide tips. In: Proceedings of the 27th Conference of the Australian Society of Sugar Cane Technologists, pp. 508-518. From: 27th Conference of the Australian Society of Sugar Cane Technologists, 3 - 6 May 2005, Bundaberg, QLD, Australia.
Loughran, J.G., and Anderson, S.I. (2005) Simulation and modeling of the penetration of brittle-ductile assemblies under large deformation. In: Proceedings of the 1st International Conference in Engineering in Materials 2004. From: 1st International Conference in Engineering in Materials 2004, 12-14 July 2004, Townsville, QLD, Australia.
Li, Q., and Loughran, J. (2005) A continuum sensitivity based design procedure for multi-stage metal forming processes. In: Proceedings of the Fourth Australasian Congress on Applied Mechanics, pp. 433-438. From: Fourth Australasian Congress on Applied Mechanics, 16-18 February 2005, Melbourne, VIC, Australia.
Li, Qing, Steven, Grant P., Xie, Y.M., and Querin, Osvaldo M. (2004) Evolutionary topology optimization for temperature reduction of heat conducting fields. International Journal of Heat and Mass Transfer, 47 (23). pp. 5071-5083.
Li, Qing, and Li, Wei (2004) A contact finite element algorithm for the multileaf spring of vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, 218 (3). pp. 305-314.
Li, Wei, Li, Qing, and Steven, Grant P. (2004) Shape optimization for contact problems with multiple load cases. In: Proceedings of Sixth World Congress on Computational Mechanics. From: Sixth World Congress on Computational Mechanics, 5-10 September 2004, Beijing, China.
Michlik, P., and Berndt, C. (2006) Image-based extended finite element modeling of thermal barrier coatings. Surface and Coatings Technology, 201 (6). pp. 2369-2380.
Montavon, G., Berndt, C., Trifa, F.I., and Guessasma, S. (2005) Correlating the spray pattern to the coating architecture: exploring the dominant mechanisms and process parameters. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.
Myhra, S., and Watson, G. (2005) Tip-induced nano-writing/machining of Si and DLC surfaces – "anodic" versus thermal oxidation? Applied Physics A: Materials Science and Processing, 81 (3). pp. 487-493.
Mazierska, Janina E., and Allen, Gregory H. (1998) Analysis of high frequency properties of multilayer structures for multichip modules. Applied Superconductivity, 4 (12). pp. 635-643.
Pandey, G.R., Mutsuyoshi, H., and Tuladhar, R. (2008) Seismic retrofitting of reinforced concrete bridge frames using external bonded FRP sheets. In: Proceedings of the 14th World Conference on Earthquake Engineering (11), pp. 1-8. From: 14WCEE 14th World Conference on Earthquake Engineering, 12-17 October 2008, Beijing, China.
Racek, O., Berndt, C.C., Guru, D., and Heberlein, J. (2005) Microstructural observation of the sintering behavior of nanostructured yttria stabilized zirconia. In: Proceedings of International Thermal Spray Conference & Exposition. From: International Thermal Spray Conference & Exposition, 2-4 May 2005, Basel, Switzerland.
Yin, L., Authurs, D., Wright, S., and Santarossa, L. (2014) Fracture and wear in shredder hammer tungsten carbide tips in the sugar cane shredding process. In: Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCF/SIF-2014), pp. 57-61. From: APCF/SIF-2014: Asian-Pacific Conference on Fracture and Strength and International Conference on Structural Integrity and Failure, 9-12 December 2014, Sydney, NSW, Australia.
Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J., and St John, David H. (2007) Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. Journal of Materials Science, 42 (23). pp. 9756-9764.
Yao, Xiangdong, Wu, Chengzhang, Du, Aijun, Lu, Gao Qing, Cheng, Huiming, Smith, Sean C., Zou, Jin, and He, Yinghe (2006) Mg-based nanocomposites with high capacity and fast kinetics for hydrogen storage. Journal of Physical Chemistry Part B, 110 (24). pp. 11697-11703.
Zhu, Liqun, Zhang, Wei, Liu, Feng, and He, Yinghe (2004) Electrodeposition of composite copper/liquid-containing microcapsule coatings. Journal of Materials Science, 39 (2). pp. 495-499.