Items where Subject is "09 ENGINEERING > 0903 Biomedical Engineering > 090302 Biomechanical Engineering"
|Up a level|
Yin, Ling (2012) Property–process relations insimulated clinical abrasive adjusting of dental ceramics. Journal of the Mechanical Behaviour of Biomedical Materials, 16. pp. 55-65.
Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2012) 2D and 3D mapping of microindentations in hydrated and dehydrated cortical bones using confocal laser scanning microscopy. Journal of Materials Science, 47 (10). pp. 4432-4438.
Song, Xiao-Fei, and Yin, Ling (2012) Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 534. pp. 193-202.
Peng, Jianhui, Song, Xiao-Fei, and Yin, Ling (2011) Forecasting of cutting forces in dental adjustment of ceramic prostheses using an artificial neural network. Advanced Materials Research, 152-153. pp. 1687-1690.
Yin, Ling, and Song, Xiao-Fei (2011) Grindability of dental ceramics in the in vitro oral regime. International Journal of Abrasive Technology, 4 (3). pp. 204-222.
Tian, Y., Wang, J., Peng, Z., and Jiang, X. (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378.
Ye, Qingsong, Xing, Quan, Ren, Yijin, Harmsen, Martin C., and Bank , Ruud A. (2010) Endo180 and MT1-MMP are involved in the phagocytosis of collagen scaffolds by macrophages and is regulated by interferon-gamma. European Cells & Materials, 20. pp. 197-209.
Yin, Ling, Venkatesan, Sudharshan, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of microstructure on micromechanical performance of dry cortical bone tissues. Materials Characterization, 60 (12). pp. 1424-1431.
Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Effect of cryo-induced microcracks on microindentation of hydrated cortical bone tissue. Materials Characterization, 60 (8). pp. 283-291.
Song , Xiao-Fei, Yin, Ling, and Han, Yi-Gang (2009) In-process assessment of dental cutting of a leucite-reinforced glass–ceramic. Medical Engineering and Physics, 31 (2). pp. 214-220.
Song, Xiao-Fei, and Yin, Ling (2009) Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. Journal of Biomechanics, 42 (3). pp. 355-360.
Yin, Ling (2009) Abrasive technology in ceramic restorative dentistry. Advanced Materials Research, 76-78 (12). pp. 363-369.
Venkatesan, Sudharshan, Yin, Ling, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2009) Study on the real time strain measurement system for analysis of strain evolution and failure behavior of cortical bone materials. Materials Forum, 33. pp. 46-52.
Peng, Z. (2007) Osteoarthritis diagnosis using wear particle analysis technique: Investigation of correlation between particle and cartilage surface in walking process. Wear, 262 (5-6). pp. 630-640.
Li, Wei, Swain, Michael V., Li, Qing, and Steven, Grant P. (2005) Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: applied biomaterials, 74B (1). pp. 520-528.
Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2005) Utilization of two-dimensional fast Fourier transform and power spectral analysis for assessment of early degeneration of articular cartilage. Journal of Musculoskeletal Research, 9 (3). pp. 119-131.
Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part I: experimental investigation. Biomaterials, 25 (20). pp. 4987-4993.
Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part II: numerical investigation. Biomaterials, 25 (20). pp. 4995-5001.
Huang, Han, Zhou, Libo, and Yin, Ling (2011) Polishing using flexible abrasive tools and loose abrasives. In: Jackson, Mark J., and Davim, J. Paulo, (eds.) Machining with Abrasives. Springer, New York, NY, USA, pp. 345-384.
Smith, Calvin M., and Yin, Ling (2013) Nanoindentation studies on lithium disilicate glass ceramics. In: Proceedings of the Materials Science and Technology Conference, pp. 2825-2831. From: MS&T 2013: Materials Science and Technology Conference, 27-31 October 2013, Montréal, QC, Cananda.
Song, Xiao-Fei, Yin, Ling, Peng, Jianhui, and Lin, Bin (2012) In vitro dental cutting of feldspar and leucite glass ceramics using an electric handpiece. In: Proceedings of the ASME International Manufacturing Science and Engineering Conference, pp. 43-50. From: ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012, 4-8 June 2012, Notre Dame, Indiana, USA.
Tian, Yuan (2012) Development of advanced techniques for osteoarthritis diagnosis and assessment. PhD thesis, James Cook University.