Nylen, Julian, Sheehan, Madoc, Whelan, Anna, and Dos Santos Antunes, Elsa (2024) Internal and surface temperature profiles of spherical biosolids particles during convective drying. Drying Technology, 42 (13). pp. 2044-2055.

Drane, Kezia, Sheehan, Madoc, Whelan, Anna, Ariel, Ellen, and Kinobe, Robert (2024) The Role of Wastewater Treatment Plants in Dissemination of Antibiotic Resistance: Source, Measurement, Removal and Risk Assessment. Antibiotics, 13 (7). 668.

Kumar, Ravinder, Dada, Tewodros Kassa, Whelan, Anna, Cannon, Patrick, Sheehan, Madoc, Reeves, Louise, and Dos Santos Antunes, Elsa (2023) Microbial and thermal treatment techniques for degradation of PFAS in biosolids: A focus on degradation mechanisms and pathways. Journal of Hazardous Materials, 452. 131212.

Kumar, Ravinder, Whelan, Anna, Cannon, Patrick, Sheehan, Madoc, Reeves, Louise, and Antunes, Elsa (2023) Occurrence of emerging contaminants in biosolids in northern Queensland, Australia. Environmental Pollution, 330. 121786.

Nylen, Julian, and Sheehan, Madoc (2023) Review of the Integration of Drying and Thermal Treatment Processes for Energy Efficient Reduction of Contaminants and Beneficial Reuse of Wastewater Treatment Plant Biosolids. Energies, 16 (4). 1964.

Dada, Tewodros Kassa, Sheehan, Madoc, Murugavelh, S., and Antunes, Elsa (2023) A review on catalytic pyrolysis for high-quality bio-oil production from biomass. Biomass Conversion and Biorefinery, 13. pp. 2595-2614.

Walker, Craig, and Sheehan, Madoc (2022) Drying Kinetics of Macroalgae as a Function of Drying Gas Velocity and Material Bulk Density, Including Shrinkage. Clean Technologies, 4 (3). pp. 669-689.

Kumar, Ravinder, Vuppaladadiyam, Arun K., Dos Santos Antunes, Elsa, Whelan, Anna, Fearon, Rob, Sheehan, Madoc, and Reeves, Louise (2022) Emerging contaminants in biosolids: presence, fate and analytical techniques. Emerging Contaminants, 8. pp. 162-194.

Sheehan, M., Antunes, E., Seligmann, B., and Weight, C. (2022) The influence of moisture content on dust generation in falling curtains of sugarcane bagasse fiber. Powder Technology, 397. 117001.

Burns, Max, Sheehan, Madoc, and Schneider, Philip (2021) Nucleation and crystal growth kinetic parameter optimization of a continuous Poiseuille flow struvite crystallizer using a discretized population balance and dynamic fluid model. Chemical Engineering Journal, 405. 126607.

Drane, Kezia, Huerlimann, Roger, Power, Michelle, Whelan, Anna, Ariel, Ellen, Sheehan, Madoc, and Kinobe, Robert (2021) Testudines as sentinels for monitoring the dissemination of antibiotic resistance in marine environments: an integrative review. Antibiotics, 10 (7). 775.

Drane, Kezia, Huerlimann, Roger, Power, Michelle, Ariel, Ellen, Sheehan, Madoc, and Kinobe, Robert (2021) Using Green sea turtles (Chelonia mydas) as essential bio-indicators for monitoring antibiotic resistance in marine environments worldwide: a critical appraisal. FASEB Journal, 35 (S1). 03303-03303.

Nylen, Julian, and Sheehan, Madoc (2021) The impact of moisture on lead concentrate powder dust emissions in ship-loading operations. Powder Technology, 394. pp. 353-362.

Kuskopf, L., Sheehan, M., and Whelan, A. (2020) Contaminants of emerging concern: developing a sampling and analysis quality plan for the Cleveland Bay Sewage Treatment Plant. Water e-journal, 5 (3).

Walker, Craig, Cole, Andrew, Antunes, Elsa, and Sheehan, Madoc (2020) Equilibrium moisture and drying kinetics modelling of macroalgae species Ulva ohnoi and Oedogonium intermedium. Clean Technologies, 2 (2). pp. 225-239.

Sheehan, Madoc (2019) Scaffolding curricula in chemical engineering degree programs in order to develop student’s awareness of sustainability. In: Chemeca 2019: chemical engineering megatrends and the elements. 167. From: Chemeca 2019: chemical engineering megatrends and the elements, 29 September - 2 October 2019, Sydney, NSW, Australia.

Hammond, Lauren, Bai, Lisa, Sheehan, Madoc, and Walker, Craig (2018) Experimental analysis and diffusion modelling of solar drying of macroalgae - Oedogonium sp. Chemical Engineering Transactions, 65. pp. 427-432.

Claxton, C., Rodman, D., and Sheehan, M. (2018) Influence of ethanol and sulphite dosing on oxygen scavenging in sugar mill boiler feedwater. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 333-341. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

Bezzina, G., Sheehan, M., and Walker, C. (2018) The influence of gas velocity and fibre density on the drying kinetics of bagasse. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 424-435. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

Palma, H., Killoran, E., Sheehan, M., Berner, F., and Heimann, K. (2017) Assessment of microalga biofilms for simultaneous remediation and biofuel generation in mine tailings water. Bioresource Technology, 234. pp. 327-335.

Slogrove, H., Sheehan, M., and Walker, C. (2017) Modelling and experimental determination of the drying kinetics of Bagasse fibre. In: Proceedings of the 39th Annual Conference of the Australian Society of Sugar Cane Technologists (39) pp. 406-416. From: ASSCT 2017: 39th Annual Conference of the Australian Society of Sugar Cane Technologists, 3-5 May 2017, Cairns, QLD, Australia.

Afshar, Sepideh, and Sheehan, Madoc (2017) Applying infrared thermography and image analysis to dilute 2-phase particulate systems: hot particle curtains. In: Energy Procedia (110) pp. 408-413. From: 1st International Conference on Energy and Power (ICEP2016), 14-16 December 2016, Melbourne, VIC, Australia.

Afshar, Sepideh, and Sheehan, Madoc (2017) CFD and infrared thermography of particle curtains undergoing convection heat transfer: image analysis and edge prediction. Powder Technology, 325. pp. 167-179.

Holmes, David W., Sheehan, Madoc, Birks, Melanie, and Smithson, John (2017) Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study. European Journal of Engineering Education, 43 (1). pp. 126-143.

Yin, Shi, Tuladhar, Rabin, Sheehan, Madoc, Combe, Mark, and Collister, Tony (2016) A life cycle assessment of recycled polypropylene fibre in concrete footpaths. Journal of Cleaner Production, 112 (Part 4). pp. 2231-2242.

Ajayi, O.O., and Sheehan, M.E. (2015) Pseudophysical compartment modeling of an industrial flighted rotary dryer with flighted and unflighted sections: energy. Industrial & Engineering Chemistry Research, 54 (49). pp. 12331-12341.

Berner, Florian, Heimann, Kirsten, and Sheehan, Madoc (2015) Microalgal biofilms for biomass production. Journal of Applied Phycology, 27 (5). pp. 1793-1804.

Walker, Craig, Cole, Andrew, and Sheehan, Madoc (2015) Modelling of thin layer drying of macroalgae. In: Proceedings of the 16th Asian Pacific Confederation of Chemical Congress. 3134753. From: APCChE 2015: 16th Asian Pacific Confederation of Chemical Congress, 27 September - 1 October 2015, Melbourne, VIC, Australia.

Afshar, Sepideh, Sheehan, Madoc, and Fazlollahi, Amir (2015) Using CFD to derive reduced order models for heat transfer in particle curtains. Progress in Computational Fluid Dynamics, 15 (2). pp. 71-80.

Berner, Florian, Heimann, Kirsten, and Sheehan, Madoc (2015) A perfused membrane biofilm reactor for microalgae cultivation in tropical conditions. In: Proceedings of the 16th Asia Pacific Confederation of Chemical Engineering Congress (2015) 3133047. pp. 291-301. From: APCChE 2015: 16th Asia Pacific Confederation of Chemical Engineering Congress, 27 September - 1 October 2015, Melbourne, VIC, Australia.

May, J., Sheehan, M., Ajayi, O., and Hickey, T. (2014) Bagasse dryer design using multi-scale compartment models. In: Proceedings of the Australian Society of Sugar Cane Technologists (36) pp. 506-515. From: ASSCT 2014: 36th Annual Conference of the Australian Society of Sugar Cane Technologists, 28 April - 1 May 2014, Broadbeach, QLD, Australia.

Sheehan, Madoc (2014) Designing sustainability curricula: a case following chemical engineering curriculum redesign. In: Thomas, Ken D., and Muga, Helen E., (eds.) Handbook of Research on Pedagogical Innovations for Sustainable Development. Practice, Progress and Proficiency in Sustainability . IGI Global, Hershey, PA, USA, pp. 474-493.

Lee, Andrew, Sheehan, Madoc, and Schneider, Phil (2014) Multi-scale process models to enable the embedding of CFD derived functions: curtain drag in flighted rotary dryers. In: Proceedings of the 10th International Conference on Computational Fluid Dynamics in the Oil and Gas, Metallurgical and Process Industries. pp. 1-9. From: CFD 2014: 10th International Conference on Computational Fluid Dynamics in the Oil and Gas, Metallurgical and Process Industries, 17-19 June 2014, Trondheim, Norway.

Ajayi, O.O., and Sheehan, M.E. (2014) Pseudophysical compartment modeling of an industrial rotary dryer with flighted and unflighted sections: solids transport. Industrial & Engineering Chemistry Research, 53. pp. 15980-15989.

Afshar, Sepideh, and Sheehan, Madoc (2013) CFD and experimental study of convectional heat transfer in free falling particle curtains. In: Proceedings of the 11th International Conference of Numerical Analysis and Applied Mathematics (1558) pp. 2005-2008. From: ICNAAM 2013: 11th International Conference of Numerical Analysis and Applied Mathematics, 21-27 September 2013, Rhodes, Greece.

Yin, L., Singh, P., Brodie, G., Sheehan, M., and Jacob, M.V. (2013) Experimental and simulation approaches: effect of microwave energy on mechanical strength in sugarcane. Australian Journal of Multi-Disciplinary Engineering, 10 (2). pp. 120-128.

Gilberd, J., and Sheehan, M. (2013) Modelling the effects of bagasse pre-drying in sugar mill boiler systems. In: Proceedings of the 35th Conference of the Australian Society of Sugar Cane Technologists. From: 35th Conference of the Australian Society of Sugar Cane Technologists, 16-18 April 2013, Townsville, QLD, Australia.

Afshar, Sepideh, and Sheehan, Madoc (2012) Using CFD to simulate heat transfer in particle curtains. In: Ninth International Conference on CFD in the Minerals and Process Industries. pp. 1-7. From: Ninth International Conference on CFD in the Minerals and Process Industries, 10-12 December 2012, Melbourne, Australia.

Yin, Ling, Singh, Parmeet, Brodie, Graham, Sheehan, Madoc, and Jacob, Mohan V. (2012) Influence of microwave energy on mechanical strength in sugarcane. In: Proceedings of the 7th Australasian Congress on Applied Mechanics. pp. 754-758. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Sheehan, Madoc, Desha, Cheryl, Schneider, Phil, and Turner, Phil (2012) Embedding sustainability into chemical engineering education: content development and competency mapping. In: Chemeca 2012. pp. 927-936. From: Quality of Life Through Chemical Engineering, 23-26 September 2012, The Museum of New Zeland, Te Papa Tongarewa, Wellington, New Zealand.

Ajayi, O.O., and Sheehan, M.E. (2012) Application of image analysis to determine design loading in flighted rotary dryers. Powder Technology, 223. pp. 123-140.

Ajayi, O.O., and Sheehan, M.E. (2012) Design loading of free flowing and cohesive solids in flighted rotary dryers. Chemical Engineering Science, 73. pp. 400-411.

Sheehan, Madoc, Schneider, Phil, and Desha, Cheryl (2012) Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia. Chemistry Education Research and Practice, 13 (2). pp. 112-119.

Sheehan, M.E., and Donaldson, M. (2011) Validation and optimization of an equilibrium model of a hot-lime-softening treatment system. Journal of Environmental Engineering, 137 (3). pp. 205-212.

Brodie, Graham, Harris, Gerard, Jacob, Mohan V., Sheehan, Madoc, and Yin, Ling (2011) Microwave modification of sugar cane to enhance juice extraction during milling. Journal of Microwave Power and Electromagnetic Energy, 45 (4). pp. 178-187.

Brodie, G., Jacob, M.V., Sheehan, M., Yin, L., Cushion, M., and Harris, G. (2011) Microwave modifications of sugar cane to enhance juice extraction during milling. International Sugar Journal, 113 (1354). pp. 714-718.

Lee, A., and Sheehan, M.E. (2010) Development of a geometric flight unloading model for flighted rotary dryers. Powder Technology, 198 (3). pp. 395-403.

Ajayi, O.O., and Sheehan, M.E. (2010) Image analysis of holdup patterns in flighted rotary dryer. In: Proceedings of Chemeca 2010. pp. 1-10. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

Fabian, C.P., Ridd, M.J., Sheehan, M.E., and Mandin, Ph. (2009) Modeling the charge-transfer resistance to determine the role of guar and activated polyacrylamide in copper electrodeposition. Journal of the Electrochemical Society, 156 (10). pp. 400-407.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2009) Shape of a particle curtain falling in stagnant air. Powder Technology, 192 (3). pp. 384-388.

Wardjiman, Chrestella, Lee, Andrew, Sheehan, Madoc, and Rhodes, Martin (2008) Behaviour of a curtain of particles falling through a horizontally-flowing gas stream. Powder Technology, 188 (2). pp. 110-118.

Vigh, S.N., Sheehan, M.E., and Schneider, P.A. (2008) Isothermal drying of non-nucleated sugar syrup films. Journal of Food Engineering, 88 (4). pp. 450-455.

Sheehan, M.E., Ajayi, O., and Lee, A. (2008) Modelling solids transport in an industrial flighted rotary dryer. In: Proceedings of the 18th European Symposium on Computer Aided Process Engineering 2008 (25) From: 18th European Symposium on Computer Aided Process Engineering 2008 , 1-4 June 2008, Lyon, France.

Fabian, C.P., Ridd, M.J., and Sheehan, M.E. (2007) Assessment of activated polyacrylamide and guar as organic additives in copper electrodeposition. Hydrometallurgy, 86 (1-2). pp. 44-55.

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007. pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Britton, P.F., Sheehan, M.E., and Schneider, P.A. (2006) A physical description of solids transport in flighted rotary dryers. Powder Technology, 165 (3). pp. 153-160.

Fabian, Cesimiro P., Mandin, Philippe, Ridd, Michael, and Sheehan, Madoc (2006) Hydrodynamic modeling of copper electrodeposition at a vertical rotating cylinder electrode. ECS Transactions, 2 (3). pp. 303-315.

Lee, Andrew, Britton, Paul, and Sheehan, Madoc (2006) Experimental measurement of the drag coefficient for a falling raw sugar particle. International Sugar Journal, 108 (1296). pp. 678-682.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2006) Flight unloading in rotary sugar dryers. International Sugar Journal, 108 (1286). pp. 83-89.

Fabian, Cesimiro, Ridd, Michael, and Sheehan, Madoc (2006) Rotating cylinder electrode study of the effect of activated polyacrylamide on surface roughness of electrodeposited copper. Hydrometallurgy, 84 (3-4). pp. 256-263.

Sheehan, M.E. (2006) A systems and resistance analysis of heat loss through an industrial flighted rotary ore dryer. In: Proceedings of 13th International Heat Transfer Conference. From: 13th International Heat Transfer Conference: IHTC-13, 13-18 August 2006, Sydney, NSW, Australia.

Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A model for solids transport in flighted rotary dryers based on physical considerations. Chemical Engineering Science, 60 (15). pp. 4171-4182.

Sheehan, Madoc, Britton, Paul, and Wong, Jia Yi (2005) Investigation of crystal abrasion and dust generation in a spouted fluidised bed dryer. In: Proceedings of the 2005 Conference of the Australian Society of Sugar Cane Technologists (27) pp. 411-422. From: 27th Annual Conference Australian Society of Sugar Cane Technologists, 3-6 May 2005, Bundaberg, QLD, Australia.

Lee, A., Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A comparison of compartment models for solids transport in flighted rotary dryers. In: Proceedings of the 33rd Australasian Chemical Engineering Conference. pp. 1-6. From: 33rd Australasian Chemical Engineering Conference, 25 - 28 September 2005, Sydney, NSW, Australia.

Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2004) Flight unloading in rotary sugar dryers. In: Proceedings fo the 26th Australian Sugar Cane Technologists Conference (26) pp. 1-7. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Lee, A., Sheehan, M.E., and Schneider, P.A. (2004) Solids transport in rotary sugar dryers. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th. pp. 1-8. From: 26th Annual Conference Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Sheehan, M.E., and Schneider, P.A. (2003) Characterisation of spouted fluidisation of raw sugar. In: Proceedings of the 25th Australian Society of Sugar Cane Technologists Conference (25) pp. 1-8. From: 25th Annual Conference Australian Society of Sugar Cane Technologists, 6-9 May 2003, Townsville, QLD, Australia.

Schneider, P.A., Sheehan, M.E., and Brown, S.T. (2003) Modelling the dynamics of solids transport in flighted rotary dryers. Computer Aided Chemical Engineering, 14. pp. 911-916.

Sheehan, M.E., Schneider, P.A., Munro, A., and Vigh, S. (2002) Transportation and axial dispersion of sugar in flighted rotary dryers. In: Proceedings of the 24th Conference of the Australian Society of Sugar Cane Technologists. From: 2002 Conference of the Australian Society of Sugar Cane Technologists, 29 April - 2 May 2002, Cairns, QLD, Australia.

Sheehan, M., and Sharratt, P.N. (2000) Predicting solvent effects on reactions and liquid-liquid equilibrium by computer simulation. Chemical Engineering Research and Design, 78 (8). pp. 1077-1083.