A

Ahmed, Farhan, Khatamifar, Mehdi, Lin, Wenxian, and Situ, Rong (2023) Thermal performance of dynamic, origami‐inspired geometries: An experimental study. Heat Transfer, 52 (5). pp. 3799-3816.

Abdulwahid, A., Situ, R., Brown, Ri., and Lin, W. (2020) Bubble dynamics in a diesel exhaust wet scrubber. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. 258. From: AFCM2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

Abdulwahid, Ahmed Adeeb (2020) Heat and mass transfer mechanisms in a wet scrubber. PhD thesis, James Cook University.

Abdulwahid, A., Situ, R., Brown, R., and Lin, W. (2020) Thermodynamic analysis of a diesel exhaust wet scrubber. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. 252. From: AFCM2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

Abdulwahid, Ahmed Adeeb, Situ, Rong, and Brown, Richard J. (2018) Heat and mass transfer process in exhaust wet scrubber. In: Proceedings of the 21st Australasian Fluid Mechanics Conference. 776. From: 21st Australasian Fluid Mechanics Conference, 10-13 Dec 2018, Adelaide, SA, Australia.

B

Bezzina, G., Sheehan, M., and Walker, C. (2018) The influence of gas velocity and fibre density on the drying kinetics of bagasse. In: Proceedings of the 40th Annual Conference of the Australian Society of Sugar Cane Technologists. pp. 424-435. From: ASSCT 2018: 40th Annual Conference of the Australian Society of Sugar Cane Technologists, 17-20 April 2018, Mackay, QLD, Australia.

C

Cowley, Joshua, Khatamifar, Mehdi, Lin, Wenxian, and Erskine, Daniel (2023) Experimental investigation of static pressure characteristics in a slotted short pin array. Experimental Heat Transfer, 36 (4). pp. 564-583.

D

Di Bella, Brody, Khatamifar, Mehdi, and Lin, Wenxian (2022) Experimental study of flow visualisation using fluorescent dye. Flow Measurement and Instrumentation, 87. 102231.

Dong, Liqiang, Lin, Wenxian, and Khatamifar, Mehdi (2021) Experimental study on the intrusion and stratification produced by confined laminar and turbulent round fountains. International Journal of Heat and Fluid Flow, 89. 108785. pp. 1-26.

H

Hammond, Lauren, Bai, Lisa, Sheehan, Madoc, and Walker, Craig (2018) Experimental analysis and diffusion modelling of solar drying of macroalgae - Oedogonium sp. Chemical Engineering Transactions, 65. pp. 427-432.

J

Jobby, Antony, Khatamifar, Mehdi, and Lin, Wenxian (2023) Alternative Internal Configurations for Enhancing Heat Transfer in Telecommunication Cabinets. Energies, 16 (8). 3505.

K

Khakbaz, Hadis, Ruberu, Kalani, Kang, Lingzhi, Talebian, Sepehr, Sayyar, Sepidar, Filippi, Benjamin, Khatamifar, Mehdi, Beirne, Stephen, and Innis, Peter C. (2021) 3D printing of highly flexible, cytocompatible nanocomposites for thermal management. Journal of Materials Science, 56. pp. 6385-6400.

Khatamifar, Mehdi, Lin, Wenxian, Armfield, S.W., Holmes, David, and Kirkpatrick, M.P. (2017) Conjugate natural convection heat transfer in a partitioned differentially-heated square cavity. International Communications in Heat and Mass Transfer, 81. pp. 92-103.

Khatamifar, M., Lin, W., Holmes, D., Armfield, S.W., and Kirkpatrick, M.P. (2016) Transient laminar conjugate natural convection in a cavity with a finite thickness and conductivity partition. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. 672. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.

L

Li, Qiong, Gao, Wenfeng, Lin, Wenxian, Liu, Tao, Zhang, Yonggang, Ding, Xiang, Huang, Xiaoqiao, and Liu, Wuming (2020) Experiment and simulation study on convective heat transfer of all-glass evacuated tube solar collector. Renewable Energy, 152. pp. 1129-1139.

Lin, Wenxian, and Armfield, S.W. (2020) Prandtl number scalings for unsteady natural convection boundary-layer flow on an evenly heated vertical plate in a homogeneous Pr > 1 fluid. Numerical Heat Transfer, Part A: Applications, 77 (6). pp. 619-631.

Lin, Wenxian, and Armfield, Steven W. (2019) Natural convection boundary-layer flow on an evenly heated vertical plate with time-varying heating flux in a stratified Pr < 1 fluid. Numerical Heat Transfer, Part A: Applications, 76 (6). pp. 393-419.

Lin, Wenxian, and Armfield, S.W. (2016) Scalings for unsteady natural convection boundary layers on a vertical plate at time-dependent temperature. International Journal of Thermal Sciences, 111. pp. 78-99.

M

Mahmud, Hasan, Lin, Wenxian, Gao, Wenfeng, Armfield, S.W., and He, Yinghe (2016) Interaction behavior of triple transitional round fountains in a homogeneous fluid. International Journal of Heat and Fluid Flow, 62 (Part B). pp. 437-454.

P

Peng, Da, Khatamifar, Mehdi, and Lin, Wenxian (2022) Experimental and numerical studies of the orientation effect on the natural convection heat dissipation of composite polymer heat sinks. Journal of Enhanced Heat Transfer, 29 (6). pp. 1-26.

S

Shephard, L., Situ, R., Gilberd, J., and Rodman, D. (2024) Impact of heat-transfer surface film on heat-transfer rate in evaporators. In: Proceedings of the 45th Annual Conference of the Australian Society of Sugar Cane Technologists (45) pp. 232-239. From: ASSCT 2024: 45th Annual Conference of the Australian Society of Sugar Cane Technologists, 16-19 April 2024, Townsville, QLD, Australia. (In Press)

Slogrove, H., Sheehan, M., and Walker, C. (2017) Modelling and experimental determination of the drying kinetics of Bagasse fibre. In: Proceedings of the 39th Annual Conference of the Australian Society of Sugar Cane Technologists (39) pp. 406-416. From: ASSCT 2017: 39th Annual Conference of the Australian Society of Sugar Cane Technologists, 3-5 May 2017, Cairns, QLD, Australia.

T

Tucker, Robert, Khatamifar, Mehdi, Lin, Wenxian, and McDonald, Kyle (2022) The Influence of Geometry Variation and Heat Sink Angle on its Thermal Performance. In: [Presented at the 12th Australasian Heat and Mass Transfer Conference] (8) From: 12AHMTC: 12th Australasian Heat and Mass Transfer Conference, 30 June – 1 July 2022, Sydney, NSW, Australia.

Tucker, Robert, Khatamifar, Mehdi, Lin, Wenxian, and McDonald, Kyle (2021) Experimental investigation of orientation and geometry effect on additive manufactured aluminium LED heat sinks under natural convection. Thermal Science and Engineering Progress, 23. 100918.

Timbs, Kalen, Khatamifar, Mehdi, Antunes, Elsa, and Lin, Wenxian (2021) Experimental study on the heat dissipation performance of straight and oblique fin heat sinks made of thermal conductive composite polymers. Thermal Science and Engineering Progress, 22. 100848.

Timbs, K., Khatamifar, M., Lin, W., and Antunes, E. (2020) Experimental study on the thermal performance of straight and oblique finned, polymer heat sinks. In: Proceedings of the 22nd Australasian Fluid Mechanics Conference. From: AFMC2020: 22nd Australasian Fluid Mechanics Conference, 7-10 December 2020, Brisbane, QLD, Australia.

W

Wei, Kaixin, Shi, Peiji, Bao, Pili, Gao, Xianping, Du, Yang, and Qin, Yanzhou (2023) Thermal Analysis and Junction Temperature Estimation under Different Ambient Temperatures Considering Convection Thermal Coupling between Power Devices. Applied Sciences, 13 (8). 5209.

Z

Zhou, L., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, W. (2020) Natural convection in a cavity with time-varying thermal forcing on a sidewall. International Journal of Heat and Mass Transfer, 150. 119234.

Zhou, L., Armfield, S.W., Williamson, N., Kirkpatrick, M.P., and Lin, Wenxian (2016) Transient natural convection flow in a cavity subject to time-varying sidewall heating and cooling. In: Proceedings of the 20th Australasian Fluid Mechanics Conference. 516. From: AFMC 2016: 20th Australasian Fluid Mechanics Conference, 5-8 December 2016, Perth, WA, Australia.