Items where Subject is "09 ENGINEERING > 0901 Aerospace Engineering > 090199 Aerospace Engineering not elsewhere classified"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: S | W
Number of items at this level: 6.

S

Suhir, E., Yi, S., and Nicolics, J. (2019) Physical design for reliability of solder joint interconnections for application in aerospace electronics. In: Proceedings of the IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace. 8869658. pp. 44-48. From: 2019 IEEE 5th International Workshop on Metrology for AeroSpace, 19-21 June 2019, Torino, Italy.

W

Wheatley, G, Kollgaard, G, Register, J, and Zaidi, M (2005) Comparative vacuum monitoring (CVM™) as an alternate means of compliance (AMOC). Insight: Non-Destructive Testing and Condition Monitoring, 47 (3). pp. 153-156.

Wheatley, G., and Kollgaard, J.R. (2003) Automated detection of fatigue cracks in the laboratory and on flying aircraft. Materials Evaluation, 61 (7). pp. 848-851.

Wheatley, G., and Kollgard, J. (2003) Automated detection of fatigue cracks on the faying surface within high load transfer bolted specimens. Proceedings of SPIE, 5047. pp. 161-168.

Wheatley, G., Kollgaard, G., Register, J., and Zaidi, M (2003) Comparative vacuum monitoring as an alternate means of compliance. In: Structural Health Monitoring 2003: Proceedings of the 4th International Workshop on Structural Health Monitoring. pp. 1358-1365. From: 4th International Workshop on Structural Health Monitoring, 15-17 September 2003, Stanford, CA, USA.

Wheatley, G., Barton, D., and Davey, K. (2001) On the detection of fatigue damage prior to surface indication. In: Proceedings of the 10th International Conference on Fracture. From: ICF10: 10th International Conference on Fracture, 2001, Hawaii, US.

This list was generated on Tue Jul 14 22:56:17 2020 AEST.