Publications by: Zhongxiao Peng

Also publishes as (Z. Peng, S.Z. Peng)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 62.

Peng, Zhongxiao, Rahman, Mohammed Izzat Abdul, Zhang, Yu, and Yin, Ling (2016) Wear behavior of pressable lithium disilicate glass ceramic. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 104 (5). pp. 968-978.

Pushparatnam, Samuel, Peng, Zhongxiao, Wu, Jingping, and Yin, Ling (2014) Abrasive wear behaviour of machinable lithium disilicate glass ceramic. In: Proceedings of the 8th Australasian Congress on Applied Mechanics. From: ACAM 8: 8th Australasian Congress on Applied Mechanics, 23-26 November 2014, Melbourne, VIC, Australia.

Wang, Meiling, Ketheesan, Natkunam, and Peng, Zhongxiao (2014) Investigations of wear particles and selected cytokines in human osteoarthritic knee joints. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (11). pp. 1176-1182.

Yin, Ling, Lymer, Richard, Billiau, Nicholas, Peng, Zhongxiao, and Stoll, Richard (2013) Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic. Journal of Materials Science, 48 (22). pp. 7902-7912.

Tian, Y., Peng, Z., and Liu, X. (2013) Development of an expert system for automatic osteoarthritis diagnosis using numerical characterisations of articular cartilages and wear particles. In: Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 194-198. From: 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 9-12 July 2013 , Wollongong, NSW, Australia.

Wang, M., Peng, Z., Vasilev, K., and Ketheesan, N (2013) Investigation of wear particles generated in human knee joints using atomic force microscopy. Tribology Letters, 51 (1). pp. 161-170.

Wang, M., Peng, Z., Price, J., and Ketheesan, N. (2013) Study of the nano-mechanical properties of human knee cartilage in different wear conditions. Wear, 301 (1-2). pp. 188-191.

Peng, Zhongxiao, Wang, Meiling, and Yin, Ling (2012) Investigation of nano-mechanical properties of cartilages of sheep knee joints. In: Proceedings of the 7th Australasian Congress on Applied Mechanics, pp. 315-321. From: 7th Australasian Congress on Applied Mechanics, 9-12 December 2012, University of Adelaide, SA.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta A., Watson, Gregory S., and Yin, Ling (2012) Nanoscale study of cartilage surfaces using atomic force microscopy. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (12). pp. 899-910.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Peng, Zhongxiao, and Li, Li (2011) Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method. Mechanical Systems and Signal Processing, 25 (7). pp. 2589-2607.

Tian, Y., Peng, Z., Gorton, D., Xiao, Y., and Ketheesan, N. (2011) Immunohistochemical analysis of structural changes in collagen for the assessment of osteoarthritis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (7). pp. 680-687.

Lei, Chengwang, Peng, Zhongxiao, Day, Thomas, Yan, Xinping, Bai, Xiuqin, and Yuan, Chengqing (2011) Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers. International Communications in Heat and Mass Transfer, 38 (1). pp. 25-30.

Wang, Meiling, Peng, Zhongxiao, Watson, Jolanta, Watson, Gregory, Morris, B.N, and Rayner, B.A. (2011) Atomic force microscopy investigation on Young's modulus of cartilage for osteoarthritis study. In: Mathew, Joseph, Ma, Lin, Tan, Andy, Weijnen, Margot, and Lee, Jay, (eds.) Engineering asset management and infrastructure sustainability. WorId Congress on Engineering Asset Management . Springer, London, pp. 1019-1025.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2011) Fault detection and diagnosis of a gearbox in marine propulsion systems using bispectrum analysis and artificial neural networks. Journal of Marine Science and Application, 10 (1). pp. 17-24.

Tian, Y., Wang, J., Peng, Z., and Jiang, X. (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A fault diagnosis approach for gears using multidimensional features and intelligent classifier. Noise and Vibration Worldwide, 41 (10). pp. 76-86.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqing, Zhao, Jiangbin, and Peng, Zhongxiao (2010) A new method of nonlinear feature extraction for multi-fault diagnosis of rotor systems. Noise and Vibration Worldwide, 41 (10). pp. 29-37.

Mulligan, Renae, Yin, Ling, Lamont, Anthony, Peng, Zhongxiao, Forwood, Mark R., and Teoh, Swee Hin (2010) Effect of penetration rate on insertion force in trabecular bone biopsy. Materials Science Forum, 654-656. pp. 2225-2228.

Li, Zhixiong, Yan, Xinping, Yuan, Chengqin, and Peng, Zhongxiao (2010) Gear faults diagnosis based on wavelet-AR model and PCA. In: Proceedings of SPIE (7820), 78203V-1. From: International Conference on Image Processing and Pattern Recognition in Industrial Engineering, 7 - 8 August 2010, Xi'an, China.

Allen, Christopher, Peng, Zhongxiao, Yin, Ling, and Carmichael, Emma (2010) Nano-hardness testing of wear particles in sheep knee joints. Materials Science Forum, 654-656 . pp. 2253-2256.

Lymer, Richard, Yin, Ling, Peng, Zhongxiao, Jones, Robert H.B., and Sandham, Andrew (2010) Surface roughness and stress responses of a feldspar porcelain to fatigue impact. Key Engineering Materials, 443. pp. 557-561.

Li, Li, Peng, Zhongxiao, and Peng, Shuzhi (2009) Detrended fluctuation analysis for gear fault diagnosis. China Mechanical Engineering, 20 (19). pp. 2311-2314.

Peng, Zhongxiao, Fasiolo, Mark, and Hart, Kane (2009) Investigation into changes in collagen structure of articular cartilage and wear particles of knee joints for osteoarthritic wear assessment. Journal of Musculoskeletal Research, 12 (3). pp. 143-152.

Scardino, A.J., Hudleston, D., Peng, Z., Paul, N.A., and de Nys, R. (2009) Biomimetic characterisation of key surface parameters for the development of fouling resistant materials. Biofouling, 25 (1). pp. 83-93.

Peng, S.Z., and Sun, H.M. (2009) Accurate and efficient prediction of acoustical performance of noise barriers against transport noise pollution. International Journal of Vehicle Noise and Vibration, 5 (1-2). pp. 53-90.

Peng, Shuzhi, Cheng, Li, Huang, Lixi, Peng, Zhongxiao, and Li, Li (2009) Advanced acoustical wave propagator technique for acoustic-structure interaction in a duct structure with/without membrane. In: Proceedings of the 16th International Congress on Sound and Vibration, pp. 4324-4331. From: 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland.

Li, Li, Peng, Zhongxiao, and Zhao, Meiyun (2009) In-situ monitoring of active crack in steel structure using acoustic emission technique. In: Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation (1), pp. 229-232. From: 2009 International Conference on Measuring Technology and Mechatronics Automation, 11-12 April 2009, Hunan, China.

Yuan, C. Q., Peng, Z., Yan, X.P., and Zhou, X. C. (2008) Surface roughness evolutions in sliding wear process. Wear, 265 (3-4). pp. 341-348.

Ebersbach, Stephan, and Peng, Zhongxiao (2008) Expert system development for vibration analysis in machine condition monitoring. Expert Systems with Applications, 34 (1). pp. 291-299.

Peng, Zhongxiao, and Tomovich, Steven (2008) The development of a new image acquisition and analysis system for 3D surface measurements using confocal laser scanning microscopy. Advanced Materials Research, 32. pp. 173-179.

Louden, D., Inderbitzin, Stefanie, Peng, Z., and de Nys, R. (2007) Development of a new protocol for testing bath sponge quality. Aquaculture, 271 (1-4). pp. 275-285.

Yuan, C.Q., Yan, X.P., and Peng, Z. (2007) Prediction of surface features of wear components based on surface characteristics of wear debris. Wear, 263 (7-12). pp. 1513-1517.

Zhou, Shouqin, Ling, Weiqing, and Peng, Zhongxiao (2007) An RFID-based remote monitoring system for enterprise internal production management. International Journal of Advanced Manufacturing Technology, 33 (7-8). pp. 837-844.

Peng, Z. (2007) Osteoarthritis diagnosis using wear particle analysis technique: Investigation of correlation between particle and cartilage surface in walking process. Wear, 262 (5-6). pp. 630-640.

Ebersbach, Stephan, Peng, Zhongxiao, and Kessissoglou, Nicole (2007) Smart condition monitoring by intergration of vibration, oil and wear particle analysis. In: Proceedings of the 14th International Congress on Sound and Vibration 2007, pp. 1-9. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Ebersbach, Stephan, and Peng, Zhongxiao (2007) Wear oriented strategy for gearbox remaining lifetime estimation. In: Proceedings of the 14th International Congress on Sound and Vibration 2007, pp. 1-8. From: 14th International Congress on Sound and Vibration, 9-12 July 2007, Cairns, Qld, Australia.

Li, Qing, Loughran, Jeffery, Peng, Zhongxiao, and Osborne, John (2006) A fracture based model for wear debris formation. Key Engineering Materials, 324 (2006). pp. 1157-1160.

Ebersbach, S., Peng, Z., and Kessissoglou, N.J. (2006) The investigation of the condition and faults of a spur gearbox using vibration and wear debris analysis techniques. Wear, 260 (1-2). pp. 16-24.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2006) Quantitative characterization of collagen orientation in the superficial zone for studying early degenerative changes in articular cartilage. Journal of Musculoskeletal Research, 10 (1). pp. 1-12.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear, 259 (1). pp. 512-518.

Yuan, Chengqing, Peng, Zhongxiao, and Yan, Xinping (2005) Surface characterization using wavelet theory and confocal laser scanning microscopy. Journal of Tribology, 127 (2). pp. 394-404.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) A complete solution for neutral knowledge representation within collaborative product development environment. International Journal of Advanced Manufacturing Technology, 25 (7-8). pp. 761-771.

Ebersbach, Stephan, and Peng, Zhongxiao (2005) The development of a comprehensive machine condition monitoring program. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring, pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Peng, Z., and Brown, J. (2005) The development of a quantitative method for the assessment of abrasive and corrosive wear. In: Proceedings of Fourth DSTO International Conference on Health and Usage Monitoring, pp. 1-11. From: AIAC-11 Eleventh Australian International Aerospace Congress, 13 - 17 March 2005, Melbourne, VIC, Australia.

Tomovich, S.J., and Peng, Z. (2005) Optimised relfection imaging for surface roughness analysis using confocal laser scanning microscopy and height encoded image processing. Journal of Physics: conference series, 13. pp. 426-429.

Zhou, Shouqin, and Peng, Zhongxiao (2005) A RFID based visible information flow for enterprise internal production management over the internet. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing, pp. 280-285. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Wu, J.P., Kirk, T.B., Peng, Z., Miller, K., and Zheng, M.H. (2005) Utilization of two-dimensional fast Fourier transform and power spectral analysis for assessment of early degeneration of articular cartilage. Journal of Musculoskeletal Research, 9 (3). pp. 119-131.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The characterization of wear transitions in sliding wear process contaminated with silica and iron powder. Tribology International, 38 (2). pp. 129-143.

Zhou, Shouqin, Peng, Zhongxiao, and Yarlagadda, Prasad K.D.V. (2005) An internet-based system for remote condition monitoring. In: Proceedings of 7th International Conference on Computer Integrated Manufacturing, pp. 286-291. From: 7th International Conference on Computer Integrated Manufacturing, 16-19 May 2005, Gliwice-Wisla, Poland.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2005) The study of sliding and rolling wear using wear debris analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials, pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Peng, Z., Kessissoglou, N.J., and Cox, M. (2005) A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques. Wear, 258 (11-12). pp. 1651-1662.

Peng, Z., Green, A., and Yuan, C. (2005) The study of wear in a spur gear using wear debris and vibration analysis techniques. In: Proceedings of Modern Science of Advanced Materials MSAM 2004: 1st International Conference in Engineering of Materials, pp. 1-7. From: Modern Science and Advanced Materials: 1st International Conference in Engineering of Materials, 12-14 July 2004, Townsville, QLD, Australia.

Yuan, C.Q., Peng, Z., Zhou, X.C., and Yan, X.P. (2004) Effects of temperature on sliding wear process under contaminated lubricant test conditions. Wear, 257 (7-8). pp. 812-822.

Zhou, S.Q., Zhao, A.P., Chin, K.S., Yarlagadda, P.K.D.V., and Peng, Z. (2004) A solution for knowledge resources provider over the internet. International Journal of Advanced Manufacturing Technology, 24 (1). pp. 148-160.

Yuan, C.Q., Li, J., Yan, X.P., and Peng, Z. (2003) The use of the fractal description to characterize engineering surfaces and wear particles. Wear, 255 (1-6). pp. 315-326.

Peng, Z., and Kessissoglou, N. (2003) Integration of wear debris and vibration analysis for machine condition monitoring. In: Proceedings of International Conference on Intelligent Maintenance Systems, pp. 23-30. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Thetford, A. (2003) The development of an expert system to monitor the condition of gearboxes using wear debris analysis techniques. In: Proceedings of International Conference on Intelligent Maintenance Systems, pp. 182-189. From: International Conference on Intelligent Maintenance Systems IMS2003, 30 October - 1 November 2003, Xi'an, China.

Peng, Z., and Kessissoglou, N. (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear, 255 (7-12). pp. 1221-1232.

Peng, Z., and Kessissoglou, N.J. (2002) The correlation of wear debris analysis with vibrations analysis of a worm gear. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002), pp. 255-261. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Zhongxiao (2002) An integrated intelligence system for wear debris analysis. Wear, 252 (9-10). pp. 730-743.

Peng, Z., and Tomovich, S.J. (2002) The study of wear particles generated from industrial machines. In: Proceedings of the 3rd Asia Pacific Conference on Systems Integrity and Maintenance (ACSIM 2002), pp. 423-428. From: Systems Integrity and Maintenance, 25-27 September 2002, Cairns, QLD, Australia.

Peng, Z., and Goodwin, S. (2001) Wear-debris analysis in expert systems. Tribology Letters, 11 (3-4). pp. 177-184.

This list was generated on Tue Nov 21 21:50:50 2017 AEST.