Anglani, Francesco, Barry, John, and Dekkers, Willem (2016) A numerical study on high-pressure water-spray cleaning for CSP reflectors. In: AIP Conference Proceedings (1734) 160001. From: SOLARPACES 2015: International Conference on Concentrating Solar Power and Chemical Energy Systems, 13-16 October 2015, Cape Town, South Africa.

PDF (Published Version) - Published Version Restricted to Repository staff only

Abstract

Mirror cleaning for concentrated solar thermal (CST) systems is an important aspect of operation and maintenance (O&M), which affects solar field efficiency. The cleaning process involves soil removal by erosion, resulting from droplet impingement on the surface. Several studies have been conducted on dust accumulation and CSP plant reflectivity restoration, demonstrating that parameters such as nozzle diameter, jet impingement angle, interaxial distance between nozzles, standoff distance, water velocity, nozzle pressure and others factors influence the extent of reflectance restoration. In this paper we aim at identifying optimized cleaning strategies suitable for CST plants, able to restore mirror reflectance by high-pressure water-spray systems through the enhancement of shear stress over reflectors’ surface. In order to evaluate the forces generated by water-spray jet impingement during the cleaning process, fluid dynamics simulations have been undertaken with ANSYS CFX software. In this analysis, shear forces represent the “critical phenomena” within the soil removal process. Enhancing shear forces on a particular area of the target surface, varying the angle of impingement in combination with the variation of standoff distances, and managing the interaxial distance of nozzles can increase cleaning efficiency. This procedure intends to improve the cleaning operation for CST mirrors reducing spotted surface and increasing particles removal efficiency. However, turbulence developed by adjacent flows decrease the shear stress generated on the reflectors surface. The presence of turbulence is identified by the formation of “fountain regions” which are mostly responsible of cleaning inefficiency. By numerical analysis using ANSYS CFX, we have modelled a stationary water-spray system with an array of three nozzles in line, with two angles of impingement: θ = 90° and θ = 75°. Several numerical tests have been carried out, varying the interaxial distance of nozzles, standoff distance, jet pressure and jet impingement angle in order to identify effective and efficient cleaning procedures to restore collectors’ reflectance, decrease turbulence and improve CST plant efficiency. Results show that the forces generated over the flat target surface are proportional to the inlet pressure and to the water velocity over the surface, and that the shear stresses decrease as the standoff distance increases.

Item ID:	78117
Item Type:	Conference Item (Research - E1)
ISSN:	1551-7616
Copyright Information:	© 2016 Author(s). Published by AIP Publishing.
Date Deposited:	11 Apr 2023 23:58
FoR Codes:	40 ENGINEERING > 4012 Fluid mechanics and thermal engineering > 401204 Computational methods in fluid flow, heat and mass transfer (incl. computational fluid dynamics) @ 50% 40 ENGINEERING > 4008 Electrical engineering > 400803 Electrical energy generation (incl. renewables, excl. photovoltaics) @ 50%
SEO Codes:	17 ENERGY > 1708 Renewable energy > 170805 Solar-thermal energy @ 100%
Downloads:	Total: 1
	More Statistics