Kessissoglou, Nicole, Tso, Yan, and Norwood, Chris (2003) Active control of a fluid-loaded cylindrical shell - part 2: active modal control. In: Proceedings of the 8th Western Pacific Acoustics Conference (Wespac VIII). pp. 1-4. From: Wespac VIII - Acoustics on the Move, 7-9 April 2003, Melbourne, VIC, Australia.

PDF (Published Version) - Published Version Restricted to Repository staff only

Abstract

In part 1, it was shown that the radiated sound pressure due to low frequency vibration of a fluid¬ loaded pressure hull is contributed to by the axial displacement (radiated pressure due to the end plates), and the radial displacement (radiated pressure due to the curved hull surface) [1]. Active control is a technique that can be used to control the hull vibration modes of a submarine and thereby reduce the radiated noise signature due to these modes. In this paper, the effect on the radiated sound pressure resulting from actively controlling the axial and radial displacements for the first two axial resonance modes of a submerged cylinder is investigated. Results show that attenuation of the axial displacement is more effective in reducing the radiated noise compared with attenuation of the radial motion. The control performance is strongly dependent on error sensor location for a given resonance mode. The use of active modal control has shown great potential to control full size hull vibration modes.

Item ID:	14706
Item Type:	Conference Item (Research - E1)
ISBN:	978-0-909882-20-4
Keywords:	active control; cylindrical shell; dynamic response; radiated noise; vibration attenuation
Date Deposited:	07 Sep 2017 03:24
FoR Codes:	09 ENGINEERING > 0913 Mechanical Engineering > 091399 Mechanical Engineering not elsewhere classified @ 100%
SEO Codes:	97 EXPANDING KNOWLEDGE @ 100%
Downloads:	Total: 1
	More Statistics