Items where Subject is "11 MEDICAL AND HEALTH SCIENCES > 1105 Dentistry > 110501 Dental Materials and Equipment"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | C | F | H | J | L | M | P | S | Y
Number of items at this level: 40.

A

Alao, Abdur-Rasheed, and Yin, Ling (2014) Nano-scale mechanical properties and behavior of pre-sintered zirconia. Journal of the Mechanical Behaviour of Biomedical Materials, 36. pp. 21-31.

C

Chin, Mervyn Y.H., Sandham, Andrew, De Vries, Joop, van der Mei, Henny C., and Busscher, Henk J. (2007) Biofilm formation on surface characterized micro-implants for skeletal anchorage in orthodontics. Biomaterials, 28 (11). pp. 2032-2040.

Chin, Mervyn Y.H., Sandham, Andrew, Pratten, Jonathan, de Vries, Joop, van der Mei, Henny C., and Busscher, Henk J. (2006) Multivariate analysis of surface physio-chemical properties controlling biofilm formation on orthodontic adhesives prior to and after fluoride and chlorhexidine treatment. Journal of Biomedical Materials Research. Part B: applied biomaterials, 78B (2). pp. 401-408.

F

Fourie, Zacharias, Özcan, Mutlu, and Sandham, Andrew (2009) Effect of dental arch convexity and type of archwire on the frictional forces. American Journal of Orthodontics and Dentofacial Orthopedics, 136 (1). - .

H

Hobbelink, Marieke G., He, Yan, Xu, Jia, Xie, Huixu, Stoll, Richard, and Ye, Qingsong (2015) Synergistic effect of wire bending and salivary pH on surface properties and mechanical properties of orthodontic stainless steel archwires. Progress In Orthodontics, 16. pp. 1-7.

Huang, Han, Zhou, Libo, and Yin, Ling (2011) Polishing using flexible abrasive tools and loose abrasives. In: Jackson, Mark J., and Davim, J. Paulo, (eds.) Machining with Abrasives. Springer, New York, NY, USA, pp. 345-384.

J

Jablonski-momeni, Anahita, Liebegall, Fabian, Stoll, Richard, Heinzel-gutenbrunner, Monika, and Pieper, Klaus (2013) Performance of a new fluorescence camera for detection of occlusal caries in vitro. Lasers in Medical Science, 28 (1). pp. 101-109.

Jablonski-Momeni, Anahita, Rosen, Simon M., Schipper, Helge M., Stoll, Richard, Roggendorf, Matthias J., Heinzel-Gutenbrunner, Monika, Stachniss, Vitus, and Pieper, Klaus (2012) Impact of measuring multiple or single occlusal lesions on estimates of diagnostic accuracy using fluorescence methods. Lasers in Medical Science, 27 (2). pp. 343-352.

Jablonski-Momeni, Anahita, Ricketts, David N.J., Rolfsen, Stefanie, Stoll, Richard, Heinzel-Gutenbrunner, Monika, Stachniss, Vitus, and Pieper, Klaus (2011) Performance of laser fluorescence at tooth surface and histological section. Lasers in Medical Science, 26 (2). pp. 171-178.

Jones, R.H.B. (2011) Temporomandibular joint reconstruction with total alloplastic joint replacement. Australian Dental Journal, 56 (1). pp. 85-91.

Jablonski-Momeni, Anahita, Schipper, Helge Marten, Rosen, Simon Martin, Heinzel-Gutenbrunner, Monika, Roggendorf, Matthias Johannes, Stoll, Richard, Stachniss, Vitus, and Pieper, Klaus (2011) Performance of a fluorescence camera for detection of occlusal caries in vitro. Odontology, 99 (1). pp. 55-61.

Jiang, Li, Yang, Liu, Xu, Qiang, Guan, Hongyu, and Wan, Qianbing (2006) Influence of adhesion on the color of glass infiltrated alumina ceramic restorations. West China Journal of Stomatology, 24 (5). pp. 441-443.

L

Li, Dong-fang, Yang, Jing-yuan, Yang, Xing-mei, Yang, Liu, Xu, Qiang, Guan, Hong-yu, and Wan, Qian-bing (2007) Influence of different types of posts and cores on color of IPS-Empress 2 crown. West China Journal of Stomatology, 25 (5). pp. 450-453.

Li, Qing, Ichim, Ionut, Loughran, Jeff, Li, Wei, Swain, Michael, and Kieser, Jules (2006) Numerical simulation of crack formation in all ceramic dental bridge. Key Engineering Materials, 312. pp. 293-298.

Li, Wei, Swain, Michael V., Li, Qing, and Steven, Grant P. (2005) Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: applied biomaterials, 74B (1). pp. 520-528.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part I: experimental investigation. Biomaterials, 25 (20). pp. 4987-4993.

Li, W., Swain, M.V., Li, Q., Ironside, J., and Steven, G.P. (2004) Fibre reinforced composite dental bridge. Part II: numerical investigation. Biomaterials, 25 (20). pp. 4995-5001.

M

Meng, Bo, Chen, Junjie, Guo, Dawei, Ye, Qingsong, and Liang, Xing (2009) The effect of titanium particles on rat bone marrow stem cells in vitro. Toxicology Mechanisms and Methods, 19 (9). pp. 552-558.

Mou, Yong -Bin, Chen, Ya -Ming, Smales, Roger J., and Yip, Kevin H.-K. (2009) Optimum post and tooth root diameters for a cast post-core system. American Journal of Dentistry, 21 (5). pp. 311-314.

P

Peng, Jianhui, Song, Xiao-Fei, and Yin, Ling (2011) Forecasting of cutting forces in dental adjustment of ceramic prostheses using an artificial neural network. Advanced Materials Research, 152-153. pp. 1687-1690.

S

Srikanth, Ramanathan, Kosmac, Tomaz, Della Bona, Alvaro, Yin, Ling, and Zhang, Yu (2015) Effects of cementation surface modifications on fracture resistance of zirconia. Dental Materials, 31 (4). pp. 435-442.

Smith, Calvin M., and Yin, Ling (2013) Nanoindentation studies on lithium disilicate glass ceramics. In: Proceedings of the Materials Science and Technology Conference, pp. 2825-2831. From: MS&T 2013: Materials Science and Technology Conference, 27-31 October 2013, Montréal, QC, Cananda.

Song, Xiao-Fei, Yin, Ling, Peng, Jian-Hui, and Lin, Bin (2013) Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece. Ceramics International, 39 (6). pp. 6237-6249.

Song, Xiao-Fei, Peng, Jian-Hui, Yin, Ling, and Lin, Bin (2013) A machining science approach to dental cutting of glass ceramics using an electric handpiece and diamond burs. Journal of Manufacturing Science and Engineering, 135 (1). pp. 1-6.

Song, Xiao-Fei, Yin, Ling, Peng, Jianhui, and Lin, Bin (2012) In vitro dental cutting of feldspar and leucite glass ceramics using an electric handpiece. In: Proceedings of the ASME International Manufacturing Science and Engineering Conference, pp. 43-50. From: ASME 2012 International Manufacturing Science and Engineering Conference MSEC2012, 4-8 June 2012, Notre Dame, Indiana, USA.

Song, Xiao-Fei, and Yin, Ling (2012) Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs. Materials Science and Engineering A: Structural Materials: Properties Microstructure and Processing, 534. pp. 193-202.

Stoll, Richard, Thull, Patric, Hobeck, Charlotte, Yüksel, Senay, Jablonski-Momeni, Anahita, and Frankenberger, Roland (2010) Adhesion of self-adhesive root canal sealers on gutta-percha and Resilon. Journal of Endodontics, 36 (5). pp. 890-893.

Stoll, Richard, and Frankenberger, Roland (2010) Theory and practice of tooth color for the restorative therapy. Quintessenz, 61 (5). pp. 581-585.

Stoll, Richard, and Jablonski-Momeni , Anahita (2009) Esthetic and functional modelling of occlusal surfaces with composite resins. DentalZeitung, 1. pp. 16-18.

Stoll, R., Jablonski, B., Jablonski-Momeni, A., and Stachniss, V. (2008) Application quality of root canal dressing with gel/cannule and paste/lentulo. Deutsche Zahnärztliche Zeitschrift, 63. pp. 544-549.

Stoll, R., Jablonski-Momeni , A., and Stachniss, V. (2008) Use of shade guides Vitapan Classical and Vita Bleachedguide 3D-Master for color measurement in tooth-bleaching. Deutsche Zahnärztliche Zeitschrift, 63. pp. 53-59.

Stoll, Richard, and Yüksel, ZÄ Senay (2008) Adhesive technique in root canal? Neue Ansätze mit innovativen Materialien New approaches with innovative materials. Endodontie Journal, 7 (4). pp. 22-26.

Stoll, R., Cappel, I., Jablonski-Momeni, A., Pieper, K., and Stachniss, V. (2007) Survival of inlays and partial crowns made of IPS empress after a 10-year observation period and in relation to various treatment parameters. Operative Dentistry, 32 (6). pp. 556-563.

Stoll, Richard, Hannig, M., and Stachniss, V. (2007) Apical leakage of 4 obturation methods following root canal shaping with different tapers. ZWR: das Deutsche Zahnärzteblatt, 116 (6). pp. 276-285.

Stoll, Richard, Gente, Michael, Palichleb, Mario, and Stachniss, Vitus (2007) On the effect of an internal light conductor on the marginal integrity of class-II composite fillings. Dental Materials, 23 (2). pp. 145-152.

Y

Yin, L., and Stoll, R. (2014) Ceramics in restorative dentistry. In: Low, I.M., (ed.) Advances in Ceramic Matrix Composites. Woodhead Publishing Series in Composites Science and Engineering, 45 . Woodhead Publishing Limited, Cambridge, UK, 624 -655.

Yin, Ling, Lymer, Richard, Billiau, Nicholas, Peng, Zhongxiao, and Stoll, Richard (2013) Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic. Journal of Materials Science, 48 (22). pp. 7902-7912.

Yin, Ling (2012) Property–process relations insimulated clinical abrasive adjusting of dental ceramics. Journal of the Mechanical Behaviour of Biomedical Materials, 16. pp. 55-65.

Yin, Ling, Venkatesan, Sudharshan, Webb, Daryl, Kalyanasundaram, Shankar, and Qin, Qing-Hua (2012) 2D and 3D mapping of microindentations in hydrated and dehydrated cortical bones using confocal laser scanning microscopy. Journal of Materials Science, 47 (10). pp. 4432-4438.

Yin, Ling, and Song, Xiao-Fei (2011) Grindability of dental ceramics in the in vitro oral regime. International Journal of Abrasive Technology, 4 (3). pp. 204-222.

This list was generated on Fri May 27 22:46:52 2016 EST.