Items where Subject is "09 ENGINEERING > 0904 Chemical Engineering > 090407 Process Control and Simulation"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | D | F | G | J | L | M | S | Y
Number of items at this level: 19.

A

Al Shakarji, Reza, He, Yinghe, and Gregory, Simon (2012) Acid mist and bubble size correlation in copper electrowinning. Hydrometallurgy, 113-114. pp. 39-41.

Ajayi, Olukayode Oludamilola (2011) Multiscale modelling of industrial flighted rotary dryers. PhD thesis, James Cook University.

Ali, Md. Imtiaj, and Schneider, Philip Andrew (2008) An approach of estimating struvite growth kinetic incorporating thermodynamic and solution chemistry, kinetic and process description. Chemical Engineering Science, 63 (13). pp. 3514-3525.

D

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) Ab initio studies of hydrogen desorption from low index magnesium hydride surface. Surface Science, 600 (9). pp. 1854-1859.

Du, A.J., Smith, Sean C., Yao, X.D., He, Y., and Lu, G.Q. (2006) Atomic hydrogen diffusion in novel magnesium nanostructures: the impact of incorporated subsurface carbon atoms. Journal of Physics: conference series, 29. pp. 167-172.

Du, A.J., Smith, Sean C., Yao, X.D., and Lu, G.Q. (2006) First-principle study of adsorption of hydrogen on Ti-doped Mg (0001) surface. Journal of Physical Chemistry Part B, 110 (43). pp. 21747-21750.

F

Fabian, Cesimiro P. (2005) Copper electrodeposition in the presence of guar or activated polyacrylamide. PhD thesis, James Cook University.

G

Galbraith, Shaun C., and Schneider, Philip A. (2010) Dynamic simulation of a struvite MSMPR crystalliser with crystal nucleation, growth and aggregation. In: Proceedings of Chemeca 2010, pp. 1-11. From: Chemeca 2010 40th Annual Australasian Chemical and Process Engineering Conference, 26-29 September 2010, Adelaide, SA, Australia.

J

Jegatheesan, V., Kim, S.H., and Joo, C.K. (2007) Evaluating the drinking water quality through an efficient chlorine decay model. Water Science and Technology: Water Supply, 6 (4). pp. 1-7.

L

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007, pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

Lee, A., Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A comparison of compartment models for solids transport in flighted rotary dryers. In: Proceedings of the 33rd Australasian Chemical Engineering Conference, pp. 1-6. From: 33rd Australasian Chemical Engineering Conference, 25 - 28 September 2005, Sydney, NSW, Australia.

M

Mandin, Philippe, Cense, J.M., Fabian, Cesimiro, Gbado, C., and Lincot, D. (2007) Electrodeposition process modeling using continuous and discrete scales. Computers & Chemical Engineering, 31 (8). pp. 980-992.

S

Schneider, P.A., and Ali, Md I. (2009) The application of process systems engineering to the development of struvite recovery systems. In: Proceedings of the 2009 International Conference on Nutrient Recovery from Wastewater Streams. From: 2009 International Conference on Nutrient Recovery from Wastewater Streams, 10 - 13 May, 2009, Vancouver, BC, Canada.

Sheehan, M.E., Ajayi, O., and Lee, A. (2008) Modelling solids transport in an industrial flighted rotary dryer. In: Proceedings of the 18th European Symposium on Computer Aided Process Engineering 2008 (25). From: 18th European Symposium on Computer Aided Process Engineering 2008 , 1-4 June 2008, Lyon, France.

Sheehan, M.E., Britton, P.F., and Schneider, P.A. (2005) A model for solids transport in flighted rotary dryers based on physical considerations. Chemical Engineering Science, 60 (15). pp. 4171-4182.

Schneider, P.A., and Vigh, S.N. (2004) Batch pan control by microwave brix. In: Proceedings of the Australian Society of Sugar Cane Technologists - 26th. From: 2004 Conference of the Australian Society of Sugar Cane Technologists, 4 - 7 May 2004, Brisbane, QLD, Australia.

Schneider, P.A., Sheehan, M.E., and Brown, S.T. (2003) Modelling the dynamics of solids transport in flighted rotary dryers. Computer Aided Chemical Engineering, 14. pp. 911-916.

Y

Yao, Xiangdong, Dahle, Arne K., Davidson, Cameron J., and St John, David H. (2007) Modelling of grain size transition with alloy concentration in solidified Al-Si alloys. Journal of Materials Science, 42 (23). pp. 9756-9764.

Yao, Xiangdong, Wu, Chengzhang, Du, Aijun, Lu, Gao Qing, Cheng, Huiming, Smith, Sean C., Zou, Jin, and He, Yinghe (2006) Mg-based nanocomposites with high capacity and fast kinetics for hydrogen storage. Journal of Physical Chemistry Part B, 110 (24). pp. 11697-11703.

This list was generated on Fri Apr 25 18:46:05 2014 EST.