Design and commissioning of a flight unloading device

Lee, A., Britton, P.F., Schneider, P.A., and Sheehan, M.E. (2007) Design and commissioning of a flight unloading device. In: Proceedings of the 35th Australasian Chemical Enginering Conferrence 2007, pp. 530-536. From: CHEMECA 2007: academia and industry - strengthening the profession, 23-26 September 2007, Melbourne, Victoria, Australia.

[img] PDF
Restricted to Repository staff only

View at Publisher Website: http://www.chemeca2007.com/

Abstract

Flighted rotary dryers are used extensively to control the temperature and moisture content of granular materials. Despite their extensive use, the solids transport characteristics of flighted rotary dryers are still poorly understood. There are a few studies in the literature that have examined the unloading of small scale flights within pilot dryers using photographic techniques. Further, theoretical considerations and geometric analysis are also reasonably well described in the literature. However, there has been little direct experimental work undertaken on full scale flights. This paper outlines the design and commissioning of an experimental apparatus to study the unloading characteristics of flights similar to those used in industrial sugar dryers. A section of a full-scale dryer flight is unloaded into a collection tray, and four load cells are used to provide continuous measurement of the unloading mass. A range of flight rotational speeds are possible. Facilities are also available for filming the unloading process at the flight tip. The most significant problems associated with directly obtaining mass flow measurements from flights has been the impact forces that occur when falling particles land in the collection tray. Design modifications and modelling techniques to reduce or quantify the impacts are described. Filtering techniques used to reduce signal noise are also described. Preliminary unloading results are given to illustrate that the apparatus provides a means to experimentally measure and compare different flight geometries, and to develop optimal flight designs.

Item ID: 3082
Item Type: Conference Item (Refereed Research Paper - E1)
Keywords: particle; experimental; flights; solids; filtering
Related URLs:
ISBN: 0-85825-844-7
Date Deposited: 29 Sep 2009 05:41
FoR Codes: 09 ENGINEERING > 0915 Interdisciplinary Engineering > 091504 Fluidisation and Fluid Mechanics @ 50%
09 ENGINEERING > 0904 Chemical Engineering > 090407 Process Control and Simulation @ 50%
SEO Codes: 86 MANUFACTURING > 8614 Machinery and Equipment > 861403 Industrial Machinery and Equipment @ 70%
85 ENERGY > 8507 Energy Conservation and Efficiency > 850703 Industrial Energy Conservation and Efficiency @ 30%
Downloads: Total: 4
More Statistics

Actions (Repository Staff Only)

Item Control Page Item Control Page