Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water
Lee, Tae-Ho, Situ, Rong, Hibiki, Takashi, Park, Hyun-Sik, Ishii, Mamoru, and Mori, Michitsugu (2009) Axial developments of interfacial area and void concentration profiles in subcooled boiling flow of water. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 473-487.
PDF (Published Version)
- Published Version
Restricted to Repository staff only
PDF (Submitted Version)
- Submitted Version
Axial developments of the local void fraction, interfacial area concentration and bubble Sauter mean diameter were measured in subcooled boiling flow of water in a vertical internally heated annulus using the double-sensor conductivity probe technique. Measurements were performed under varying conditions of heat flux, inlet liquid velocity and inlet liquid temperature. A total of 10 data sets were acquired. Based on these measurements with the previous data obtained in the present test loop, the influence of flow condition on the profiles of local two-phase flow parameters was discussed. The measured average void fraction and interfacial area concentration were compared with the predictions by existing correlations for drift-flux parameters and interfacial area concentration. Also, the recently proposed bubble layer thickness model in subcooled boiling was evaluated for the measurement data.
|Item Type:||Article (Refereed Research - C1)|
|Date Deposited:||30 Mar 2012 00:36|
|FoR Codes:||09 ENGINEERING > 0915 Interdisciplinary Engineering > 091504 Fluidisation and Fluid Mechanics @ 50%
09 ENGINEERING > 0915 Interdisciplinary Engineering > 091505 Heat and Mass Transfer Operations @ 50%
|SEO Codes:||85 ENERGY > 8504 Energy Transformation > 850403 Nuclear Energy @ 50%
85 ENERGY > 8507 Energy Conservation and Efficiency > 850701 Commercial Energy Conservation and Efficiency @ 50%
Last 12 Months: 13